Get the most out of your Centmin Mod LEMP stack
Become a Member

CentOS 7.x 1.2.3-eva2000.08 beta install attempts work log

Discussion in 'Beta release code' started by eva2000, Jul 10, 2014.

  1. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Just switched to Ramnode, I'm so surprised with its superfast, now I have installed successfully. Thanks for your help anyway :D
    * Post-Install Check List....
    *************************************************
    --------------------------------------------------------
    Check ccache Version:
    --------------------------------------------------------
    ccache version 3.1.9
    Copyright (C) 2002-2007 Andrew Tridgell
    Copyright (C) 2009-2011 Joel Rosdahl
    This program is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License as published by the Free Software
    Foundation; either version 3 of the License, or (at your option) any later
    version.
    --------------------------------------------------------
    Check Nginx Version:
    --------------------------------------------------------
    inc/centminfinish.inc: line 26: nginx: command not found
    --------------------------------------------------------
    Check PHP-FPM Version:
    --------------------------------------------------------
    inc/centminfinish.inc: line 32: php: command not found
    --------------------------------------------------------
    Check MariaDB installed RPM Versions:
    --------------------------------------------------------
    MariaDB-common-10.0.13-1.el6.x86_64
    MariaDB-devel-10.0.13-1.el6.x86_64
    MariaDB-server-10.0.13-1.el6.x86_64
    MariaDB-client-10.0.13-1.el6.x86_64
    MariaDB-compat-10.0.13-1.el6.x86_64
    MariaDB-shared-10.0.13-1.el6.x86_64
    --------------------------------------------------------
    Check Memcached Server Version:
    --------------------------------------------------------
    memcached 1.4.20
    --------------------------------------------------------
    Check CSF Firewall Version:
    --------------------------------------------------------
    csf: v7.15 (generic)
    --------------------------------------------------------
    Check Siege Benchmark Version:
    --------------------------------------------------------
    SIEGE 3.0.7
    Copyright (C) 2014 by Jeffrey Fulmer, et al.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.

    --------------------------------------------------------
    Check ngx_pagespeed Control Script:
    ngx_pagespeed install on Centmin Mod - Menu based Nginx installer for CentOS servers
    --------------------------------------------------------
    Detected 7.0
    pscontrol handler
    pscontrol edit
    pscontrol on
    pscontrol off
    pscontrol statson
    pscontrol statsoff
    --------------------------------------------------------
    Check mysqlreport version:
    --------------------------------------------------------
    mysqlreport v3.5-maria11 Jul 4 2013
    --------------------------------------------------------
    Check NSD Bind Version:
    --------------------------------------------------------
    NSD version 3.2.17
    Written by NLnet Labs.
    Copyright (C) 2001-2011 NLnet Labs. This is free software.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.
    --------------------------------------------------------
    Check YUM Repo List
    --------------------------------------------------------
    Loaded plugins: fastestmirror, priorities
    Loading mirror speeds from cached hostfile
    * base: mirror.us.leaseweb.net
    * epel: mirrors.mit.edu
    * extras: mirror.us.leaseweb.net
    * rpmforge: repoforge.mirror.constant.com
    * updates: mirror.us.leaseweb.net
    96 packages excluded due to repository priority protections
    repo id repo name status
    base/7/x86_64 CentOS-7 - Base 6,551+1,914
    epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 5,081+529
    extras/7/x86_64 CentOS-7 - Extras 31
    mariadb MariaDB 11+2
    rpmforge RHEL 7 - RPMforge.net - dag 185+60
    updates/7/x86_64 CentOS-7 - Updates 565+198
    repolist: 12,424
    grep: 08: No such file or directory
    *************************************************
    * Centmin Mod install completed....
    *************************************************
    Total YUM Time: 274.557615289 seconds
    Total Centmin Mod Install Time: 1087.955817179 seconds
     
    • Like Like x 1
  2. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    nice 1087 seconds or 18 minutes (y)

    spoke too soon, seems Nginx and PHP-FPM failed to install

    Code:
    --------------------------------------------------------
    Check Nginx Version:
    --------------------------------------------------------
    inc/centminfinish.inc: line 26: nginx: command not found
    --------------------------------------------------------
    Check PHP-FPM Version:
    --------------------------------------------------------
    inc/centminfinish.inc: line 32: php: command not found
    --------------------------------------------------------
    using troubleshooting guide at How to troubleshoot Centmin Mod initial install issues | Centmin Mod Community to check install logs, you can run menu options 4 and 5 to upgrade Nginx and PHP-FPM and then check the much shorter Nginx and PHP upgrade logs to see where the problem is.

    or just check the install log and see if you can find Nginx and PHP-FPM sections
     
  3. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    • Like Like x 1
  4. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Another failed test from Ramnode:

    checking for OS
    + Linux 3.10.0-123.6.3.el7.x86_64 x86_64
    checking for C compiler ... found
    + using GNU C compiler
    checking for --with-ld-opt="-L/svr-setup/staticlibssl/lib -Wl,-rpath -lssl -lcrypto -ldl -lz" ... not found
    ./configure: error: the invalid value in --with-ld-opt="-L/svr-setup/staticlibssl/lib -Wl,-rpath -lssl -lcrypto -ldl -lz"
    *************************************************
    Tue Sep 9 03:46:49 UTC 2014
    Error: 1, Nginx configure failed
     
    • Like Like x 1
  5. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    hmmm let me try a test run

    you are using latest .08 beta right centminmod/centminmod at 123.08centos7beta01 · GitHub ? there's been commits as recent as yesterday Commits · centminmod/centminmod · GitHub

    if you try nginx upgrade via menu option 5 does it work ?

    works for me

    Code:
    -L/svr-setup/staticlibssl/lib -Wl,-rpath -lssl -lcrypto -ldl -lz -lpthread -lcrypt -lexpat -lstdc++ ../ngx_pagespeed-release-1.8.31.4-beta/psol/lib/Release/linux/x64/pagespeed_automatic.a -lrt -pthread -lm ../pcre-8.35/.libs/libpcre.a ../openssl-1.0.1i/.openssl/lib/libssl.a ../openssl-1.0.1i/.openssl/lib/libcrypto.a -lz -lgd -latomic_ops
    make[1]: Leaving directory `/svr-setup/nginx-1.7.4'
    make -f objs/Makefile manpage
    make[1]: Entering directory `/svr-setup/nginx-1.7.4'
    sed -e "s|%%PREFIX%%|/usr/local/nginx|" \
            -e "s|%%PID_PATH%%|/usr/local/nginx/logs/nginx.pid|" \
            -e "s|%%CONF_PATH%%|/usr/local/nginx/conf/nginx.conf|" \
            -e "s|%%ERROR_LOG_PATH%%|/usr/local/nginx/logs/error.log|" \
            < man/nginx.8 > objs/nginx.8
    make[1]: Leaving directory `/svr-setup/nginx-1.7.4'
    
    real    0m57.600s
    user    0m35.518s
    sys     0m20.843s
    *************************************************
    
    Tue Sep  9 03:56:16 UTC 2014
    Success: Nginx make ok
    
    *************************************************
    make -f objs/Makefile install
    make[1]: Entering directory `/svr-setup/nginx-1.7.4'
    test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx'
    test -d '/usr/local/sbin'               || mkdir -p '/usr/local/sbin'
    test ! -f '/usr/local/sbin/nginx'               || mv '/usr/local/sbin/nginx'                   '/usr/local/sbin/nginx.old'
    cp objs/nginx '/usr/local/sbin/nginx'
    test -d '/usr/local/nginx/conf'                 || mkdir -p '/usr/local/nginx/conf'
    cp conf/koi-win '/usr/local/nginx/conf'
    cp conf/koi-utf '/usr/local/nginx/conf'
    cp conf/win-utf '/usr/local/nginx/conf'
    test -f '/usr/local/nginx/conf/mime.types'              || cp conf/mime.types '/usr/local/nginx/conf'
    cp conf/mime.types '/usr/local/nginx/conf/mime.types.default'
    test -f '/usr/local/nginx/conf/fastcgi_params'          || cp conf/fastcgi_params '/usr/local/nginx/conf'
    cp conf/fastcgi_params          '/usr/local/nginx/conf/fastcgi_params.default'
    test -f '/usr/local/nginx/conf/fastcgi.conf'            || cp conf/fastcgi.conf '/usr/local/nginx/conf'
    cp conf/fastcgi.conf '/usr/local/nginx/conf/fastcgi.conf.default'
    test -f '/usr/local/nginx/conf/uwsgi_params'            || cp conf/uwsgi_params '/usr/local/nginx/conf'
    cp conf/uwsgi_params            '/usr/local/nginx/conf/uwsgi_params.default'
    test -f '/usr/local/nginx/conf/scgi_params'             || cp conf/scgi_params '/usr/local/nginx/conf'
    cp conf/scgi_params             '/usr/local/nginx/conf/scgi_params.default'
    test -f '/usr/local/nginx/conf/nginx.conf'              || cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf'
    cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default'
    test -d '/usr/local/nginx/logs'                 || mkdir -p '/usr/local/nginx/logs'
    test -d '/usr/local/nginx/logs' ||              mkdir -p '/usr/local/nginx/logs'
    test -d '/usr/local/nginx/html'                 || cp -R html '/usr/local/nginx'
    test -d '/usr/local/nginx/logs' ||              mkdir -p '/usr/local/nginx/logs'
    make[1]: Leaving directory `/svr-setup/nginx-1.7.4'
    
    real    0m0.149s
    user    0m0.068s
    sys     0m0.084s
    Starting nginx (via systemctl):  [  OK  ]
    *************************************************
    
    Tue Sep  9 03:56:20 UTC 2014
    Success: Nginx was installed properly
    
    *************************************************
    *************************************************
    * nginx updated
    *************************************************
     
    Last edited: Sep 9, 2014
  6. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Another error about PHP-FPM 5.4.32:

    Updated main/php_version.h
    checking for cc... cc
    checking whether the C compiler works... no
    configure: error: in `/svr-setup/php-5.4.32/fpm-build':
    configure: error: C compiler cannot create executables
    See `config.log' for more details
    make: *** No targets specified and no makefile found. Stop.
    real 0m0.002s
    user 0m0.002s
    sys 0m0.000s
    make: *** No rule to make target `install'. Stop.
    real 0m0.002s
    user 0m0.002s
    sys 0m0.000s
    ----------------------------------------------------------------------------------
    PHP was not installed properly
    ----------------------------------------------------------------------------------
    service php-fpm restart
    Gracefully shutting down php-fpm kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspe c ... or kill -l [sigspec]
    ................................... failed. Use force-exit
    Starting php-fpm /etc/init.d/php-fpm: line 77: /usr/local/sbin/php-fpm: No such file or directory
    failed
    I did more /svr-setup/php-5.4.32/fpm-build/config.log

    configure:3900: $? = 0
    configure:3889: cc -v >&5
    Using built-in specs.
    COLLECT_GCC=cc
    COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.8.2/lto-wrapper
    Target: x86_64-redhat-linux
    Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --wit
    h-bugurl=Red Hat Bugzilla Main Page --enable-bootstrap --enable-shared --enable-threads=po
    six --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptio
    ns --enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu --enable-langua
    ges=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin --enable-initfini-array --disable-li
    bgcj --with-isl=/builddir/build/BUILD/gcc-4.8.2-20140120/obj-x86_64-redhat-linux/isl-install --with
    -cloog=/builddir/build/BUILD/gcc-4.8.2-20140120/obj-x86_64-redhat-linux/cloog-install --enable-gnu-
    indirect-function --with-tune=generic --with-arch_32=x86-64 --build=x86_64-redhat-linux
    Thread model: posix
    gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC)
    configure:3900: $? = 0
    configure:3889: cc -V >&5
    cc: error: unrecognized command line option '-V'
    cc: fatal error: no input files
    compilation terminated.
    configure:3900: $? = 4
    configure:3889: cc -qversion >&5
    cc: error: unrecognized command line option '-qversion'
    cc: fatal error: no input files
    compilation terminated.
    configure:3900: $? = 4
    configure:3920: checking whether the C compiler works
    configure:3942: cc -O2 -m64 -march=native -pipe -g -mmmx -msse3 conftest.c >&5
    conftest.c:1:0: error: CPU you selected does not support x86-64 instruction set
    /* confdefs.h */
    ^
    configure:3946: $? = 1
    configure:3984: result: no
    configure: failed program was:
    | /* confdefs.h */
    | #define PACKAGE_NAME ""
    | #define PACKAGE_TARNAME ""
    | #define PACKAGE_VERSION ""
    | #define PACKAGE_STRING ""
    | #define PACKAGE_BUGREPORT ""
    | #define PACKAGE_URL ""
    | /* end confdefs.h. */
    |
    | int
    | main ()
    | {
    |
    | ;
    | return 0;
    | }
    configure:3989: error: in `/svr-setup/php-5.4.32/fpm-build':
    configure:3991: error: C compiler cannot create executables

    Hope it's useful for developing your script.
     
  7. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
  8. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
  9. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Yes, I followed your steps at RamNode - CentOS 7.0 Netinstall Guide for RamNode CKVM VPS server | Centmin Mod Community
    and command line:
    Code:
    curl -sL [URL]https://gist.github.com/centminmod/dbe765784e03bc4b0d40/raw/installer.sh[/URL] | bash 
    I tried option 5 as well but same error...
     
  10. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
  11. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
  12. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    basically it's not accepting this nginx config option which strange works for me to date

    you can try to remove those lines from inc/nginx_configure.inc lines 192 and 196 at centminmod/nginx_configure.inc at 123.08centos7beta01 · centminmod/centminmod · GitHub

    change it from

    Code:
    ./configure --with-cc-opt="-I${STATICLIBSSL}/include -I/usr/include" --with-ld-opt="-L${STATICLIBSSL}/lib -Wl,-rpath -lssl -lcrypto -ldl -lz" --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-ipv6 --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module${GEOIPOPT} --with-openssl-opt="enable-tlsext" --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-2.1 --add-module=../headers-more-nginx-module-${NGINX_HEADERSMORE} --add-module=../nginx-accesskey-2.0.3 --add-module=../nginx-http-concat-master${GPERFOPT}${WEBDAVOPT}${RUBYMODULE}${MEMCOPT}${SRCCACHEOPT}${STICKYOPT}${UPSTREAMOPT}${OPENSSLOPT}${LIBATOMICOPT}${PCREJITOPT}${SPDYOPT}${PGSPEEDOPT}
    
        else
    
    ./configure --with-cc-opt="-I${STATICLIBSSL}/include -I/usr/include" --with-ld-opt="-L${STATICLIBSSL}/lib -Wl,-rpath -lssl -lcrypto -ldl -lz" --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module${GEOIPOPT} --with-openssl-opt="enable-tlsext" --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-2.1 --add-module=../headers-more-nginx-module-${NGINX_HEADERSMORE} --add-module=../nginx-accesskey-2.0.3 --add-module=../nginx-http-concat-master${GPERFOPT}${WEBDAVOPT}${RUBYMODULE}${MEMCOPT}${SRCCACHEOPT}${STICKYOPT}${UPSTREAMOPT}${OPENSSLOPT}${LIBATOMICOPT}${PCREJITOPT}${SPDYOPT}${PGSPEEDOPT}
        fi  
    to

    Code:
    ./configure --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-ipv6 --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module${GEOIPOPT} --with-openssl-opt="enable-tlsext" --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-2.1 --add-module=../headers-more-nginx-module-${NGINX_HEADERSMORE} --add-module=../nginx-accesskey-2.0.3 --add-module=../nginx-http-concat-master${GPERFOPT}${WEBDAVOPT}${RUBYMODULE}${MEMCOPT}${SRCCACHEOPT}${STICKYOPT}${UPSTREAMOPT}${OPENSSLOPT}${LIBATOMICOPT}${PCREJITOPT}${SPDYOPT}${PGSPEEDOPT}
    
        else
    
    ./configure --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module${GEOIPOPT} --with-openssl-opt="enable-tlsext" --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-2.1 --add-module=../headers-more-nginx-module-${NGINX_HEADERSMORE} --add-module=../nginx-accesskey-2.0.3 --add-module=../nginx-http-concat-master${GPERFOPT}${WEBDAVOPT}${RUBYMODULE}${MEMCOPT}${SRCCACHEOPT}${STICKYOPT}${UPSTREAMOPT}${OPENSSLOPT}${LIBATOMICOPT}${PCREJITOPT}${SPDYOPT}${PGSPEEDOPT}
        fi  
    by removing the 2 instances of this part from lines 192 and 196

    Code:
    --with-cc-opt="-I${STATICLIBSSL}/include -I/usr/include" --with-ld-opt="-L${STATICLIBSSL}/lib -Wl,-rpath -lssl -lcrypto -ldl -lz"
    in your install copies /inc/nginx_configure.inc

    then run menu option 4 to recompile Nginx and see if it works
     
  13. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Last edited: Sep 9, 2014
  14. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    if you just tried it latest .08 beta, i updated .08 beta github and removed the 2 lines already so you should have it working now

    i tried another install and works for me as well so scratching my head why it doesn't work for you

    try the manual .08 beta install method outlined at centminmod/centminmod at 123.08centos7beta01 · GitHub

    Code:
    yum -y install wget nano bc unzip
    branchname=123.08centos7beta01
    wget -O /usr/local/src/${branchname}.zip https://github.com/centminmod/centminmod/archive/${branchname}.zip
    cd /usr/local/src
    unzip ${branchname}.zip
    cd centminmod-${branchname}
    chmod +x centmin.sh
    
    Then to install either type

    for menu mode
    Code:
    ./centmin.sh
    
    but before you run centmin.sh, edit the line 337 in centmin.sh and set INTELOPT=n centminmod/centmin.sh at 123.08centos7beta01 · centminmod/centminmod · GitHub then run centmin.sh menu option 1 for install and see if that works

    the above php error log you showed seems to suggest it's related to INTELOPT settings I enabled

    is this a RamNode OpenVZ or KVM VPS ?
     
    • Like Like x 1
  15. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    Also what do you get for output from these 2 commands

    Code:
    gcc -march=native -Q --help=target
    
    Code:
    cat /proc/cpuinfo | grep flags | sort -u
    
    3rd command to check

    Code:
    cat /proc/cpuinfo
    
     
    Last edited: Sep 9, 2014
  16. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Thank you very much for your follow-up. I'm using SSD KVM from Ramnode
    [[email protected] centminlogs]# gcc -march=native -Q --help=target
    Code:
    The following options are target specific:
      -m128bit-long-double  [disabled]
      -m32  [disabled]
      -m3dnow  [disabled]
      -m3dnowa  [disabled]
      -m64  [enabled]
      -m80387  [enabled]
      -m8bit-idiv  [disabled]
      -m96bit-long-double  [enabled]
      -mabi=  sysv
      -mabm  [disabled]
      -maccumulate-outgoing-args  [disabled]
      -maddress-mode=  short
      -madx  [disabled]
      -maes  [disabled]
      -malign-double  [disabled]
      -malign-functions=  0
      -malign-jumps=  0
      -malign-loops=  0
      -malign-stringops  [enabled]
      -mandroid  [disabled]
      -march=  pentium-m
      -masm=  att
      -mavx  [disabled]
      -mavx2  [disabled]
      -mavx256-split-unaligned-load  [disabled]
      -mavx256-split-unaligned-store  [disabled]
      -mbionic  [disabled]
      -mbmi  [disabled]
      -mbmi2  [disabled]
      -mbranch-cost=  0
      -mcld  [disabled]
      -mcmodel=  32
      -mcpu=
      -mcrc32  [disabled]
      -mcx16  [enabled]
      -mdispatch-scheduler  [disabled]
      -mf16c  [disabled]
      -mfancy-math-387  [enabled]
      -mfentry  [enabled]
      -mfma  [disabled]
      -mfma4  [disabled]
      -mforce-drap  [disabled]
      -mfp-ret-in-387  [enabled]
      -mfpmath=  387
      -mfsgsbase  [disabled]
      -mfused-madd
      -mfxsr  [enabled]
      -mglibc  [enabled]
      -mhard-float  [enabled]
      -mhle  [disabled]
      -mieee-fp  [enabled]
      -mincoming-stack-boundary=  0
      -minline-all-stringops  [disabled]
      -minline-stringops-dynamically  [disabled]
      -mintel-syntax
      -mlarge-data-threshold=  0x10000
      -mlong-double-64  [disabled]
      -mlong-double-80  [enabled]
      -mlwp  [disabled]
      -mlzcnt  [disabled]
      -mmmx  [disabled]
      -mmovbe  [disabled]
      -mms-bitfields  [disabled]
      -mno-align-stringops  [disabled]
      -mno-fancy-math-387  [disabled]
      -mno-push-args  [disabled]
      -mno-red-zone  [disabled]
      -mno-sse4  [enabled]
      -momit-leaf-frame-pointer  [disabled]
      -mpc32  [disabled]
      -mpc64  [disabled]
      -mpc80  [disabled]
      -mpclmul  [disabled]
      -mpopcnt  [disabled]
      -mprefer-avx128  [disabled]
      -mpreferred-stack-boundary=  0
      -mprfchw  [disabled]
      -mpush-args  [enabled]
      -mrdrnd  [disabled]
      -mrdseed  [disabled]
      -mrecip  [disabled]
      -mrecip=
      -mred-zone  [enabled]
      -mregparm=  0
      -mrtd  [disabled]
      -mrtm  [disabled]
      -msahf  [enabled]
      -msoft-float  [disabled]
      -msse  [disabled]
      -msse2  [disabled]
      -msse2avx  [disabled]
      -msse3  [disabled]
      -msse4  [disabled]
      -msse4.1  [disabled]
      -msse4.2  [disabled]
      -msse4a  [disabled]
      -msse5
      -msseregparm  [disabled]
      -mssse3  [disabled]
      -mstack-arg-probe  [disabled]
      -mstackrealign  [enabled]
      -mstringop-strategy=  [default]
      -mtbm  [disabled]
      -mtls-dialect=  gnu
      -mtls-direct-seg-refs  [enabled]
      -mtune=  generic
      -muclibc  [disabled]
      -mveclibabi=  [default]
      -mvect8-ret-in-mem  [disabled]
      -mvzeroupper  [disabled]
      -mx32  [disabled]
      -mxop  [disabled]
      -mxsave  [disabled]
      -mxsaveopt  [disabled]
      Known assembler dialects (for use with the -masm-dialect= option):
      att intel
      Known ABIs (for use with the -mabi= option):
      ms sysv
      Known code models (for use with the -mcmodel= option):
      32 kernel large medium small
      Valid arguments to -mfpmath=:
      387 387+sse 387,sse both sse sse+387 sse,387
      Known vectorization library ABIs (for use with the -mveclibabi= option):
      acml svml
      Known address mode (for use with the -maddress-mode= option):
      long short
      Valid arguments to -mstringop-strategy=:
      byte_loop libcall loop rep_4byte rep_8byte rep_byte unrolled_loop
      Known TLS dialects (for use with the -mtls-dialect= option):
      gnu gnu2
    
    [[email protected] centminlogs]# cat /proc/cpuinfo | grep flags | sort -u
    Code:
    flags  : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm nopl pni cx16 hypervisor lahf_lm
    
    [[email protected] centminlogs]# cat /proc/cpuinfo
    Code:
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 13
    model name      : QEMU Virtual CPU version (cpu64-rhel6)
    stepping        : 3
    microcode       : 0x1
    cpu MHz         : 2600.000
    cache size      : 4096 KB
    physical id     : 0
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 0
    initial apicid  : 0
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 4
    wp              : yes
    flags           : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm nopl pni cx16 hypervisor lahf_lm
    bogomips        : 5200.00
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 46 bits physical, 48 bits virtual
    power management:
    
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 13
    model name      : QEMU Virtual CPU version (cpu64-rhel6)
    stepping        : 3
    microcode       : 0x1
    cpu MHz         : 2600.000
    cache size      : 4096 KB
    physical id     : 1
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 1
    initial apicid  : 1
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 4
    wp              : yes
    flags           : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm nopl pni cx16 hypervisor lahf_lm
    bogomips        : 5200.00
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 46 bits physical, 48 bits virtual
    power management:
    
    I will try to install everything new from your help above. ;)
     
  17. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    hmm reloaded on of my RamNode CKVM VPS servers with CentOS 7.0 minimal and yes seems PHP fails to compile there.. so will need to investigate !
     
  18. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    • Like Like x 1
  19. eva2000

    eva2000 Administrator Staff Member

    43,420
    9,856
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +15,223
    Local Time:
    3:53 AM
    Nginx 1.17.x
    MariaDB 5.5/10.x
    Hmmm nearly there, think it might be the RamNode VPS itself

    seems default /tmp size might be too small for CentOS 7.0 template it comes with

    Code:
    df -h
    Filesystem      Size  Used Avail Use% Mounted on
    /dev/vda1        49G  3.2G   44G   7% /
    devtmpfs        240M     0  240M   0% /dev
    tmpfs           246M     0  246M   0% /dev/shm
    tmpfs           246M  8.3M  237M   4% /run
    tmpfs           246M     0  246M   0% /sys/fs/cgroup
    tmpfs           246M  8.3M  237M   4% /etc/machine-id
    tmpfs           246M  8.0K  246M   1% /tmp
    my CentOS 7.0 netinstall guide for RamNode didn't have such problems as there wasn't a dedicated /tmp partition set RamNode - CentOS 7.0 Netinstall Guide for RamNode CKVM VPS server | Centmin Mod Community
     
    Last edited: Sep 9, 2014
  20. Josephm

    Josephm Active Member

    132
    44
    28
    Aug 26, 2014
    Ratings:
    +48
    Local Time:
    12:53 AM
    1.9.5
    10.0.21
    Thanks so much:
    My installation seems fine:
    Code:
    *************************************************
    * Post-Install Check List....
    *************************************************
    --------------------------------------------------------
    Check ccache Version:
    --------------------------------------------------------
    ccache version 3.1.9
    Copyright (C) 2002-2007 Andrew Tridgell
    Copyright (C) 2009-2011 Joel Rosdahl
    This program is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License as published by the Free Software
    Foundation; either version 3 of the License, or (at your option) any later
    version.
    --------------------------------------------------------
    Check Nginx Version:
    --------------------------------------------------------
    nginx version: nginx/1.7.4
    built by gcc 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC)
    TLS SNI support enabled
    configure arguments: --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-http_ssl_module --with-http_gzip_static_module --with-http_stub_status_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module --with-http_secure_link_module --with-http_flv_module --with-http_realip_module --with-openssl-opt=enable-tlsext --add-module=../ngx-fancyindex-ngx-fancyindex --add-module=../ngx_cache_purge-2.1 --add-module=../headers-more-nginx-module-0.25 --add-module=../nginx-accesskey-2.0.3 --add-module=../nginx-http-concat-master --with-http_dav_module --add-module=../nginx-dav-ext-module-0.0.3 --add-module=../openresty-memc-nginx-module-1518da4 --add-module=../openresty-srcache-nginx-module-ffa9ab7 --add-module=../nginx-sticky-module-1.2.5 --add-module=../nginx_upstream_check_module-0.1.9 --with-openssl=../openssl-1.0.1i --with-libatomic --with-pcre=../pcre-8.35 --with-pcre-jit --with-http_spdy_module --add-module=../ngx_pagespeed-release-1.8.31.4-beta
    --------------------------------------------------------
    Check PHP-FPM Version:
    --------------------------------------------------------
    PHP 5.4.32 (cli) (built: Sep  9 2014 10:54:16)
    Copyright (c) 1997-2014 The PHP Group
    Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies
    --------------------------------------------------------
    Check MariaDB installed RPM Versions:
    --------------------------------------------------------
    MariaDB-server-10.0.13-1.el6.x86_64
    MariaDB-client-10.0.13-1.el6.x86_64
    MariaDB-compat-10.0.13-1.el6.x86_64
    MariaDB-shared-10.0.13-1.el6.x86_64
    MariaDB-common-10.0.13-1.el6.x86_64
    MariaDB-devel-10.0.13-1.el6.x86_64
    --------------------------------------------------------
    Check Memcached Server Version:
    --------------------------------------------------------
    memcached 1.4.20
    --------------------------------------------------------
    Check CSF Firewall Version:
    --------------------------------------------------------
    csf: v7.15 (generic)
    --------------------------------------------------------
    Check Siege Benchmark Version:
    --------------------------------------------------------
    SIEGE 3.0.7
    Copyright (C) 2014 by Jeffrey Fulmer, et al.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.
    
    --------------------------------------------------------
    Check ngx_pagespeed Control Script:
    [URL]http://centminmod.com/nginx_ngx_pagespeed.html[/URL]
    --------------------------------------------------------
    Detected 7.0
    pscontrol handler
    pscontrol edit
    pscontrol on
    pscontrol off
    pscontrol statson
    pscontrol statsoff
    --------------------------------------------------------
    Check mysqlreport version:
    --------------------------------------------------------
    mysqlreport v3.5-maria11 Jul 4 2013
    --------------------------------------------------------
    Check NSD Bind Version:
    --------------------------------------------------------
    NSD version 3.2.17
    Written by NLnet Labs.
    Copyright (C) 2001-2011 NLnet Labs.  This is free software.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.
    --------------------------------------------------------
    Check YUM Repo List
    --------------------------------------------------------
    Loaded plugins: fastestmirror, priorities
    Loading mirror speeds from cached hostfile
     * base: mirror.us.leaseweb.net
     * epel: epel.mirror.constant.com
     * extras: mirror.us.leaseweb.net
     * rpmforge: repoforge.mirror.constant.com
     * updates: mirror.us.leaseweb.net
    96 packages excluded due to repository priority protections
    repo id  repo name  status
    base/7/x86_64  CentOS-7 - Base  6,551+1,914
    epel/x86_64  Extra Packages for Enterprise Linux 7 - x86_64  5,081+529
    extras/7/x86_64  CentOS-7 - Extras  31
    mariadb  MariaDB  11+2
    rpmforge  RHEL 7 - RPMforge.net - dag  185+60
    updates/7/x86_64  CentOS-7 - Updates  577+200
    repolist: 12,436
    grep: 09: No such file or directory
    *************************************************
    * Centmin Mod install completed....
    *************************************************
    *************************************************
    *  Setup memcached_*.php admin page ...
    *************************************************
    Setup Memcached Server Admin Login Details for /usr/local/nginx/html/memcache_12354.php
    current memcached username: memcacheuser
    current memcached password: memcachepass
    *************************************************
    Memcached Server Admin Login: /usr/local/nginx/html/memcache_12354.php
    new memcached username: memadmin1242dbc9ff
    new memcached password: c9897782888bd12603
    *************************************************
    *************************************************
    * memcache_23354.php admin page installed
    *************************************************
    *************************************************
    * MariaDB Security Setup
    *************************************************
    -------------------------------------------------------
    MySQL root user password set
    MySQL root user added to /root/.my.cnf
    -------------------------------------------------------
    MySQL root password: rciI#$ttggaUuMJhpr87HsaaK+A
    -------------------------------------------------------
    *************************************************
    * MariaDB Security Setup Completed
    *************************************************
    
    SYSTEMCTL
    Code:
    [[email protected] centminmod-123.08centos7beta01]# systemctl status nginx.service
    nginx.service - SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server
      Loaded: loaded (/etc/rc.d/init.d/nginx)
      Active: active (running) since Tue 2014-09-09 11:01:11 UTC; 4min 36s ago
     Main PID: 31544 (nginx)
      CGroup: /system.slice/nginx.service
      ├─31544 nginx: master process /usr/local/sbin/nginx -c /usr/local/nginx/conf/...
      └─31545 nginx: worker process
    Sep 09 11:01:11 bwh.tld systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S......
    Sep 09 11:01:11 bwh.tld nginx[31537]: Starting nginx: [  OK  ]
    Sep 09 11:01:11 bwh.tld systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S)...er.
    Hint: Some lines were ellipsized, use -l to show in full.
    
    I'll come back to DigitalOcean tonight to see if they're good.
    Thanks again ;)
     
    • Like Like x 1