Nginx Nginx upgrade problem

dce · Jun 9, 2020

CentOS 7 64bit
Nginx Version 1.17.9
PHP Version Installed: 5.6.37
centmin is on the latest update.

Hello
I am attempting to upgrade Nginx Version 1.17.9 to the latest version 1.19.0 using option 4 in centmin.

The compile seems to complete successfully but on exit centmin still shows version 1.17.9 with version 1.19.0 available for upgrade. If I run Nginx -v, it shows Nginx is still version 1.17.9. I have done the compile twice, but I am still stuck on Version 1.17.9.

What could be the problem?

Thanks.

eva2000 · Jun 9, 2020

You'd need to troubleshoot and inspect nginx upgrade log as per Install - Nginx - How to troubleshoot Nginx installs/upgrades

make sure you run cmupdate command to update 123.09beta01 before running centmin.sh menu option 4

dce · Jun 10, 2020

eva2000 said: ↑

You'd need to troubleshoot and inspect nginx upgrade log as per Install - Nginx - How to troubleshoot Nginx installs/upgrades

make sure you run cmupdate command to update 123.09beta01 before running centmin.sh menu option 4
Click to expand...

Hello,

I looked into it further following your advice.

Centmin is up to date. The log shows make is failing. below are some of the errors the log file shows. What could be causing the error? Thanks in advance.

checking for require defined symbols (--require-defined) ... not found
checking for require defined symbols fallback (--undefined) ... found
+ ngx_http_lua_module was configured
adding module in ../headers-more-nginx-module-0.33
+ ngx_http_headers_more_filter_module was configured
checking for PCRE library ... found
checking for PCRE JIT support ... found
checking for GD library ... found
checking for GD WebP support ... not found
checking for GeoIP library ... found
checking for GeoIP IPv6 support ... found
checking for atomic_ops library ... not found

./configure: error: libatomic_ops library was not found.

make: *** No rule to make target `build', needed by `default'. Stop.

real 0m0.003s
user 0m0.002s
sys 0m0.000s

Tue Jun 9 23:36:25 EDT 2020
Error: 2, Nginx make failed

brijendrasial · Jun 10, 2020

what is output of
Code:
yum list installed | grep libatomic_ops-devel
if nothing is found try to install
Code:
yum install libatomic_ops-devel -y
Now try to compile nginx again.

eva2000 · Jun 10, 2020

full nginx log would be useful for context

and info from Install - Nginx - How to troubleshoot Nginx installs/upgrades ?

Please provide any relevant information that applies to you:
CentOS Version: i.e. CentOS 6 32bit or 64bit / CentOS 7 64bit ?

Centmin Mod Version Installed: i.e. 123.08stable or 123.09beta01

Nginx Version Installed: i.e. 1.15.3

PHP Version Installed: i.e. 5.6.37, 7.0.31, 7.1.21, 7.2.9

MariaDB MySQL Version Installed: i.e. 10.0.x or 10.1.xx or 10.2.xx

When was last time updated Centmin Mod code base ? : i.e. run centmin.sh menu option 23 submenu option 2 or cmupdate command
Persistent Config: Do you have any persistent config file options set in /etc/centminmod/custom_config.inc ? You can check via this command:
Code (Text):
cat /etc/centminmod/custom_config.inc
Post output in CODE tags.

dce · Jun 11, 2020

eva2000 said: ↑
full nginx log would be useful for context

and info from Install - Nginx - How to troubleshoot Nginx installs/upgrades ?

Please provide any relevant information that applies to you:
CentOS Version: i.e. CentOS 6 32bit or 64bit / CentOS 7 64bit ?

Centmin Mod Version Installed: i.e. 123.08stable or 123.09beta01

Nginx Version Installed: i.e. 1.15.3

PHP Version Installed: i.e. 5.6.37, 7.0.31, 7.1.21, 7.2.9

MariaDB MySQL Version Installed: i.e. 10.0.x or 10.1.xx or 10.2.xx

When was last time updated Centmin Mod code base ? : i.e. run centmin.sh menu option 23 submenu option 2 or cmupdate command
Persistent Config: Do you have any persistent config file options set in /etc/centminmod/custom_config.inc ? You can check via this command:
Code (Text):
cat /etc/centminmod/custom_config.inc
Post output in CODE tags.
Click to expand...
Thanks Eva2000 and brijendrasial

Ran: yum list installed | grep libatomic_ops-devel
Result: libatomic_ops-devel.x86_64 7.2d-7.el7 @base

So it looks like the library is installed.

Here are the other details requested.
OS version: CentOS 7 64bit

Centmin version: 123.09beta01 (always updated as soon as I see an update)

Nginx Version Installed: 1.17.9 (tried going directly to 1.19.0. When that did not work, I tried updating to the next direct update 1.17.10. Still the upgrade failed.

PHP Version Installed: 5.6.40

MariaDB Version: 10.1.45-MariaDB MariaDB Server

Last time updated Centmin Mod code base: ran cmupdate 10 June, 2am EST. Result shows "Already up-to-date".

Persistent Config Entries:

Code (Text):

CLANG='n' DEVTOOLSETSIX='y' NGINX_DEVTOOLSETGCC='y' ORESTY_LUANGINX='y' NGXDYNAMIC_LUA='y' NGXDYNAMIC_DEVELKIT='y' NGINX_HPACK='y' CLOUDFLARE_ZLIB='y' LIBRESSL_SWITCH='n' NGXDYNAMIC_NGXPAGESPEED='y' NGINX_PAGESPEED='y' MARCH_TARGETNATIVE='n' LETSENCRYPT_DETECT='y' AUDITD_ENABLE='y' PUREFTPD_DISABLED=y

This server has run very reliably for over 2 years. It hosts a bunch of legacy Drupal 7 websites.

Thanks for the help.

eva2000 · Jun 11, 2020

try removing these 2 from persistent config file
Code (Text):
CLANG='n'
DEVTOOLSETSIX='y'

dce · Jun 11, 2020

eva2000 said: ↑
try removing these 2 from persistent config file
Code (Text):
CLANG='n'
DEVTOOLSETSIX='y'
Click to expand...
Thanks Eva2000. Quick question. I have to recompile PHP for some backported security fixes. If I have to do both a ngnix upgrade and a php recompile, as a rule of thumb, which job should be executed first (also given my present situation)?

dce · Jun 11, 2020

Hello Eva2000, I tried your suggestion and the upgrade fails with the same error. Nginx make failed.

Wed Jun 10 22:22:14 EDT 2020
Success: Nginx configure ok

make: *** No rule to make target `build', needed by `default'. Stop.

real 0m0.003s
user 0m0.002s
sys 0m0.000s

Wed Jun 10 22:22:14 EDT 2020
Error: 2, Nginx make failed

eva2000 · Jun 11, 2020

need the full nginx upgrade log as per Nginx upgrade problem to really understand what's going on

dce · Jun 11, 2020

eva2000 said: ↑

need the full nginx upgrade log as per Nginx upgrade problem to really understand what's going on
Click to expand...

Too large for pastebin, so I used gist.github.com

Here is the full upgrade log

centmin nginx compile problem due to make failure

Thanks for the help.

dce · Jun 13, 2020

eva2000 said: ↑

need the full nginx upgrade log as per Nginx upgrade problem to really understand what's going on
Click to expand...

Hello eva2000, did you get a chance to check the nginx upgrade log to see what could be the problem with the upgrade?

I see there is another nginx upgrade problem thread that opened just recently. I have the same config error in my log.

./configure: error: libatomic_ops library was not found.

here is the output for: yum history list libatomic_ops-devel
Code:
yum history list libatomic_ops-devel
Loaded plugins: fastestmirror, priorities, versionlock
ID     | Command line             | Date and time    | Action(s)      | Altered
-------------------------------------------------------------------------------
     9 | -y install virt-what pyt | 2018-02-13 01:25 | Install        |  280 
I uploaded my log to gist.github.com

centmin nginx compile problem due to make failure

If you need me to do anything on my end to aid troubleshooting, just let me know.

Regards,

eva2000 · Jun 13, 2020

log not revealing much, try changing persistent config file

from

Code (Text):

CLANG='n'
DEVTOOLSETSIX='y'
NGINX_DEVTOOLSETGCC='y'
ORESTY_LUANGINX='y'
NGXDYNAMIC_LUA='y'
NGXDYNAMIC_DEVELKIT='y'
NGINX_HPACK='y'
CLOUDFLARE_ZLIB='y'
LIBRESSL_SWITCH='n'
NGXDYNAMIC_NGXPAGESPEED='y'
NGINX_PAGESPEED='y'
MARCH_TARGETNATIVE='n'
LETSENCRYPT_DETECT='y'
AUDITD_ENABLE='y'
PUREFTPD_DISABLED=y

to

Code (Text):

#ORESTY_LUANGINX='y'
#NGXDYNAMIC_LUA='y'
#NGINX_HPACK='y'
#NGXDYNAMIC_NGXPAGESPEED='y'
#NGINX_PAGESPEED='y'
MARCH_TARGETNATIVE='n'
LETSENCRYPT_DETECT='y'
AUDITD_ENABLE='y'
PUREFTPD_DISABLED=y

and then run centmin.sh menu option 4

brijendrasial · Jun 13, 2020

I tried adding the path in inc/nginx_configure.inc
Code:
LIBATOMICOPT=" --with-libatomic"
to
Code:
LIBATOMICOPT=" --with-libatomic=/usr/lib64"
and installation went ahead. Its not taking the path

eva2000 · Jun 13, 2020

strange it shouldn't need defining the path as it hasn't needed to in years

eva2000 · Jun 13, 2020

brijendrasial said: ↑
I tried adding the path in inc/nginx_configure.inc
Code:
LIBATOMICOPT=" --with-libatomic"
to
Code:
LIBATOMICOPT=" --with-libatomic=/usr/lib64"
and installation went ahead. Its not taking the path
Click to expand...
no idea why all my servers don't need the path defined but while i am at it, decided to build a newer libatomic_ops custom RPM = 7.6.10 instead of CentOS 7 default 7.2d which is 6+ yrs older that you can try

install it
Code (Text):
wget -4 https://centminmod.com/centminmodparts/libatomic_ops/centmin-libatomic_ops-7.6.10-1.el7.x86_64.rpm -O /svr-setup/centmin-libatomic_ops-7.6.10-1.el7.x86_64.rpm
yum -y localinstall /svr-setup/centmin-libatomic_ops-7.6.10-1.el7.x86_64.rpm
then try centmin.sh menu option 4

brijendrasial · Jun 13, 2020

I think we should wait for op to test it and confirm.

brijendrasial · Jun 14, 2020

I am attaching another error thrown

https://gist.githubusercontent.com/Brijendrasial/73356b85aafa2a5c3a3799f4bc60970e/raw/8ed43e243205f02f4f6955e245cc3adb31c89547/error%20log%20centminmod%20nginx

brijendrasial · Jun 14, 2020

here I see error

make -f objs/Makefile
make[1]: Entering directory `/svr-setup/nginx-1.18.0'
cd ../openssl-1.1.1g \
&& if [ -f Makefile ]; then make clean; fi \
&& ./config --prefix=/svr-setup/nginx-1.18.0/../openssl-1.1.1g/.openssl no-shared no-threads enable-ec_nistp_64_gcc_128 enable-tls1_3 -fuse-ld=gold \
&& make \
&& make install_sw LIBDIR=lib
cd ../zlib-1.2.11 \
&& make distclean \
&& CFLAGS="-O2 -fomit-frame-pointer -pipe " CC="ccache gcc" \
./configure \
&& make libz.a
cd /usr/lib64 \
&& if [ -f Makefile ]; then make distclean; fi \
&& ./configure
sed -e "s|%%PREFIX%%|/usr/local/nginx|" \
-e "s|%%PID_PATH%%|/usr/local/nginx/logs/nginx.pid|" \
-e "s|%%CONF_PATH%%|/usr/local/nginx/conf/nginx.conf|" \
-e "s|%%ERROR_LOG_PATH%%|/usr/local/nginx/logs/error.log|" \
< man/nginx.8 > objs/nginx.8
make[2]: Entering directory `/svr-setup/zlib-1.2.11'
rm -f *.o *.lo *~ \
example minigzip examplesh minigzipsh \
example64 minigzip64 \
infcover \
libz.* foo.gz so_locations \
_match.s maketree contrib/infback9/*.o
/bin/sh: line 2: ./configure: No such file or directory
make[2]: Entering directory `/svr-setup/openssl-1.1.1g'
cp -p zconf.h.in zconf.h
make[1]: *** [/usr/lib64/Makefile] Error 127
make[1]: *** Waiting for unfinished jobs....
Click to expand...

dce · Jun 14, 2020

brijendrasial said: ↑

I think we should wait for op to test it and confirm.
Click to expand...

I will test late tonight (EST) when the server is not busy.... will take a disk snapshot and test. Thanks for your input.

Log in / Register

Forums

Welcome to Centmin Mod Community

Nginx Nginx upgrade problem

dce Member

eva2000 Administrator Staff Member

dce Member

brijendrasial Active Member

eva2000 Administrator Staff Member

dce Member

eva2000 Administrator Staff Member

dce Member

dce Member

eva2000 Administrator Staff Member

dce Member

dce Member

eva2000 Administrator Staff Member

brijendrasial Active Member

eva2000 Administrator Staff Member

eva2000 Administrator Staff Member

brijendrasial Active Member

brijendrasial Active Member

brijendrasial Active Member

dce Member

.

Log in / Register

Useful Searches

Welcome to Centmin Mod Community

Nginx Nginx upgrade problem

dce Member

eva2000 Administrator Staff Member

dce Member

brijendrasial Active Member

eva2000 Administrator Staff Member

dce Member

eva2000 Administrator Staff Member

dce Member

dce Member

eva2000 Administrator Staff Member

dce Member

dce Member

eva2000 Administrator Staff Member

brijendrasial Active Member

eva2000 Administrator Staff Member

eva2000 Administrator Staff Member

brijendrasial Active Member

brijendrasial Active Member

brijendrasial Active Member

dce Member

.