Learn about Centmin Mod LEMP Stack today
Become a Member

VMHaus Benchmarks Various Configs

Discussion in 'Virtual Private Server (VPS) hosting' started by cooper, Jan 30, 2018.

  1. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    Ok, I think I may just have found my favourite new host. Here's a few benchmarks that I've run today on a $7 per month node.

    [​IMG]


    [​IMG]


    [​IMG]

    That's a really good overall install time. However it did take me 3 attempts to actually install Centmin Mod because the network connection was lost twice. I contacted their support who responded almost immediately that they'd had 2 DDOS attacks in the morning but everything should be ok going forward. They were right and the install went ahead with no hitches giving the above results.

    *************************************************
    * Post-Install Check List....
    *************************************************

    --------------------------------------------------------
    Check ccache Version:
    --------------------------------------------------------
    ccache version 3.3.6

    Copyright (C) 2002-2007 Andrew Tridgell
    Copyright (C) 2009-2018 Joel Rosdahl

    This program is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License as published by the Free Software
    Foundation; either version 3 of the License, or (at your option) any later
    version.

    --------------------------------------------------------
    Check Nginx Version:
    --------------------------------------------------------
    nginx version: nginx/1.13.8
    built by clang 3.4.2 (tags/RELEASE_34/dot2-final)
    built with LibreSSL 2.6.4
    TLS SNI support enabled
    configure arguments: --with-ld-opt='-lrt -ljemalloc -Wl,-z,relro -Wl,-rpath,/usr /local/lib' --with-cc-opt='-m64 -mtune=native -DTCP_FASTOPEN=23 -g -O3 -fstack-p rotector -fuse-ld=gold --param=ssp-buffer-size=4 -Wformat -Werror=format-securit y -Wp,-D_FORTIFY_SOURCE=2 -Wno-sign-compare -Wno-int-conversion -Wno-implicit-fu nction-declaration -Wno-incompatible-library-redeclaration -Wno-format -Wno-stri ng-plus-int -Wno-deprecated-declarations -Wno-unused-parameter -Wno-unused-const -variable -Wno-conditional-uninitialized -Wno-mismatched-tags -Wno-sometimes-uni nitialized -Wno-parentheses-equality -Wno-tautological-compare -Wno-self-assign -Wno-deprecated-register -Wno-deprecated -Wno-invalid-source-encoding -Wno-point er-sign -Wno-parentheses -Wno-enum-conversion -Wno-c++11-compat-deprecated-writa ble-strings -Wno-write-strings -gsplit-dwarf' --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-compat --with-http_stub_stat us_module --with-http_secure_link_module --with-libatomic --with-http_gzip_stati c_module --with-http_sub_module --with-http_addition_module --with-http_image_fi lter_module=dynamic --with-http_geoip_module --with-stream_geoip_module --with-s tream_realip_module --with-stream_ssl_preread_module --with-threads --with-strea m=dynamic --with-stream_ssl_module --with-http_realip_module --add-dynamic-modul e=../ngx-fancyindex-0.4.2 --add-module=../ngx_cache_purge-2.4.2 --add-module=../ ngx_devel_kit-0.3.0 --add-dynamic-module=../set-misc-nginx-module-0.31 --add-dyn amic-module=../echo-nginx-module-0.61 --add-module=../redis2-nginx-module-0.14 - -add-module=../ngx_http_redis-0.3.7 --add-module=../memc-nginx-module-0.18 --add -module=../srcache-nginx-module-0.31 --add-dynamic-module=../headers-more-nginx- module-0.33 --with-pcre=../pcre-8.41 --with-pcre-jit --with-zlib=../zlib-1.2.11 --with-http_ssl_module --with-http_v2_module --with-openssl=../libressl-2.6.4

    --------------------------------------------------------
    Check PHP-FPM Version:
    --------------------------------------------------------
    PHP 5.6.33 (cli) (built: Jan 29 2018 11:28:26)
    Copyright (c) 1997-2016 The PHP Group
    Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
    with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2016, by Zend Technologies

    --------------------------------------------------------
    Check MariaDB installed RPM Versions:
    --------------------------------------------------------
    MariaDB-client-10.1.30-1.el7.centos.x86_64
    MariaDB-compat-10.1.30-1.el7.centos.x86_64
    MariaDB-devel-10.1.30-1.el7.centos.x86_64
    MariaDB-server-10.1.30-1.el7.centos.x86_64
    MariaDB-common-10.1.30-1.el7.centos.x86_64
    MariaDB-shared-10.1.30-1.el7.centos.x86_64

    --------------------------------------------------------
    Check Memcached Server Version:
    --------------------------------------------------------
    memcached 1.5.4

    --------------------------------------------------------
    Check CSF Firewall Version:
    --------------------------------------------------------
    csf: v11.05 (generic)

    --------------------------------------------------------
    Check Siege Benchmark Version:
    --------------------------------------------------------
    SIEGE 4.0.4

    Copyright (C) 2017 by Jeffrey Fulmer, et al.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.


    --------------------------------------------------------
    Check mysqlreport version:
    --------------------------------------------------------
    mysqlreport v3.5-maria11 Jul 4 2013

    --------------------------------------------------------
    Check pure-ftpd Version:
    --------------------------------------------------------
    pure-ftpd v1.0.42

    --------------------------------------------------------
    Check YUM Repo List
    --------------------------------------------------------
    Loaded plugins: fastestmirror, priorities, versionlock
    Loading mirror speeds from cached hostfile
    * base: mirrors.coreix.net
    * epel: www.mirrorservice.org
    * extras: mirrors.coreix.net
    * rpmforge: ftp.nluug.nl
    * updates: mirrors.coreix.net
    215 packages excluded due to repository priority protections
    repo id repo name status
    base/7/x86_64 CentOS-7 - Base 7,420+2,171
    epel/x86_64 Extra Packages for Enterprise Linux 7 11,332+922
    extras/7/x86_64 CentOS-7 - Extras 329
    mariadb MariaDB 14+2
    rpmforge RHEL 7 - RPMforge.net - dag 139+106
    updates/7/x86_64 CentOS-7 - Updates 1,484+425
    varnishcache_varnish41/x86_64 varnishcache_varnish41 46
    varnishcache_varnish41-source varnishcache_varnish41-source 0
    repolist: 20,764

    --------------------------------------------------------
    mytimes check:
    /usr/bin/mytimes
    --------------------------------------------------------
    Mon Jan 29 11:31:17 UTC 2018 [UTC]
    Mon Jan 29 21:31:17 AEST 2018 [Australia/Brisbane]
    Mon Jan 29 03:31:17 PST 2018 [America/Los_Angeles]
    Mon Jan 29 05:31:17 CST 2018 [America/Chicago]
    Mon Jan 29 06:31:17 EST 2018 [America/New_York]
    Mon Jan 29 06:31:17 EST 2018 [America/Montreal]
    Mon Jan 29 11:31:17 GMT 2018 [Europe/London]
    Mon Jan 29 12:31:17 CET 2018 [Europe/Berlin]
    Mon Jan 29 18:31:17 +07 2018 [Asia/Bangkok]
    Mon Jan 29 18:31:17 +07 2018 [Asia/Ho_Chi_Minh]
    Mon Jan 29 18:31:17 WIB 2018 [Asia/Jakarta]
    Mon Jan 29 19:31:17 +08 2018 [Asia/Kuala_Lumpur]
    Mon Jan 29 19:31:17 +08 2018 [Asia/Singapore]
    --------------------------------------------------------
    *************************************************
    * Centmin Mod install completed....
    *************************************************



    The detailed results from the benchmark script can be found here and also look really good to me. They compare very favourably to the Hetzner benchmark here especially when it comes to the PHP and Mysql benchmarks. Both instances are around the same price.

    Looking forward to testing them over a longer period but it's a really good first impression.
     
    • Like Like x 1
  2. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    nice thanks for sharing and yup will be faster as they use Xeon E3-1270v6 clocked at 3.8Ghz just 2 cpu threads but yes will be fast. DDOS attacks are a shame though :(

    disk I/O looks crazy nice performance wise with NVMe :)

    FYI, instead of images/screenshots of install time/postinstall check text output, you can also use BBCODE CODE tags ;)

    How to use forum BBCODE code tags :)
     
  3. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    Hah hah, I'd never even heard of NVMe until last week but the numbers certainly look good.

    Noted on BBCODE.

    One more benchmark to go for the 4GB VMHaus instance and that's me done for a while. I may benchmark Hetzner at some point but you've already done that so I kinda already know the numbers. I'll be lurking around the CMS sub-forum to pick up some optimisation tips though.

    I even found a use for my Google Cloud credit which was to run a Mautic instance on it. That coupled with Elasticmail's free 150k emails a month will do nicely.
     
  4. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    Ok, so I'm going to test the 4GB instance as well. The only reason I'm doing this is because you get 50GB of disk space which is closer to the recommended specs here. The minimum disk space requirement is 30GB for KVM virtualisation and the recommended space is 60GB. I know I'll probably stick to the 2GB instance for just now but there's no harm in taking the higher spec instance for a test drive.

    [​IMG]

    Code:
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 158
    model name      : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
    stepping        : 9
    microcode       : 0x1
    cpu MHz         : 3792.016
    cache size      : 8192 KB
    physical id     : 0
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 0
    initial apicid  : 0
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 13
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch arat fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1
    bogomips        : 7584.03
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management:
    
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 158
    model name      : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
    stepping        : 9
    microcode       : 0x1
    cpu MHz         : 3792.016
    cache size      : 8192 KB
    physical id     : 1
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 1
    initial apicid  : 1
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 13
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch arat fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1
    bogomips        : 7584.03
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management:
    
    processor       : 2
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 158
    model name      : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
    stepping        : 9
    microcode       : 0x1
    cpu MHz         : 3792.016
    cache size      : 8192 KB
    physical id     : 2
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 2
    initial apicid  : 2
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 13
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch arat fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1
    bogomips        : 7584.03
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management:
    
    processor       : 3
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 158
    model name      : Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz
    stepping        : 9
    microcode       : 0x1
    cpu MHz         : 3792.016
    cache size      : 8192 KB
    physical id     : 3
    siblings        : 1
    core id         : 0
    cpu cores       : 1
    apicid          : 3
    initial apicid  : 3
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 13
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch arat fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1
    bogomips        : 7584.03
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management:
    
    Code:
    *************************************************
    * Post-Install Check List....
    *************************************************
    
    --------------------------------------------------------
    Check ccache Version:
    --------------------------------------------------------
    ccache version 3.3.6
    
    Copyright (C) 2002-2007 Andrew Tridgell
    Copyright (C) 2009-2018 Joel Rosdahl
    
    This program is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License as published by the Free Software
    Foundation; either version 3 of the License, or (at your option) any later
    version.
    
    --------------------------------------------------------
    Check Nginx Version:
    --------------------------------------------------------
    nginx version: nginx/1.13.8
    built by clang 3.4.2 (tags/RELEASE_34/dot2-final)
    built with LibreSSL 2.6.4
    TLS SNI support enabled
    configure arguments: --with-ld-opt='-lrt -ljemalloc -Wl,-z,relro -Wl,-rpath,/usr/local/lib' --with-cc-opt='-m64 -mtune=native -DTCP_FASTOPEN=23 -g -O3 -fstack-protector -fuse-ld=gold --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wno-sign-compare -Wno-int-conversion -Wno-implicit-function-declaration -Wno-incompatible-library-redeclaration -Wno-format -Wno-string-plus-int -Wno-deprecated-declarations -Wno-unused-parameter -Wno-unused-const-variable -Wno-conditional-uninitialized -Wno-mismatched-tags -Wno-sometimes-uninitialized -Wno-parentheses-equality -Wno-tautological-compare -Wno-self-assign -Wno-deprecated-register -Wno-deprecated -Wno-invalid-source-encoding -Wno-pointer-sign -Wno-parentheses -Wno-enum-conversion -Wno-c++11-compat-deprecated-writable-strings -Wno-write-strings -gsplit-dwarf' --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --with-compat --with-http_stub_status_module --with-http_secure_link_module --with-libatomic --with-http_gzip_static_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module=dynamic --with-http_geoip_module --with-stream_geoip_module --with-stream_realip_module --with-stream_ssl_preread_module --with-threads --with-stream=dynamic --with-stream_ssl_module --with-http_realip_module --add-dynamic-module=../ngx-fancyindex-0.4.2 --add-module=../ngx_cache_purge-2.4.2 --add-module=../ngx_devel_kit-0.3.0 --add-dynamic-module=../set-misc-nginx-module-0.31 --add-dynamic-module=../echo-nginx-module-0.61 --add-module=../redis2-nginx-module-0.14 --add-module=../ngx_http_redis-0.3.7 --add-module=../memc-nginx-module-0.18 --add-module=../srcache-nginx-module-0.31 --add-dynamic-module=../headers-more-nginx-module-0.33 --with-pcre=../pcre-8.41 --with-pcre-jit --with-zlib=../zlib-1.2.11 --with-http_ssl_module --with-http_v2_module --with-openssl=../libressl-2.6.4
    
    --------------------------------------------------------
    Check PHP-FPM Version:
    --------------------------------------------------------
    PHP 5.6.33 (cli) (built: Jan 29 2018 18:44:15)
    Copyright (c) 1997-2016 The PHP Group
    Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
        with Zend OPcache v7.0.6-dev, Copyright (c) 1999-2016, by Zend Technologies
    
    --------------------------------------------------------
    Check MariaDB installed RPM Versions:
    --------------------------------------------------------
    MariaDB-client-10.1.30-1.el7.centos.x86_64
    MariaDB-compat-10.1.30-1.el7.centos.x86_64
    MariaDB-devel-10.1.30-1.el7.centos.x86_64
    MariaDB-server-10.1.30-1.el7.centos.x86_64
    MariaDB-common-10.1.30-1.el7.centos.x86_64
    MariaDB-shared-10.1.30-1.el7.centos.x86_64
    
    --------------------------------------------------------
    Check Memcached Server Version:
    --------------------------------------------------------
    memcached 1.5.4
    
    --------------------------------------------------------
    Check CSF Firewall Version:
    --------------------------------------------------------
    csf: v11.05 (generic)
    
    --------------------------------------------------------
    Check Siege Benchmark Version:
    --------------------------------------------------------
    SIEGE 4.0.4
    
    Copyright (C) 2017 by Jeffrey Fulmer, et al.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS
    FOR A PARTICULAR PURPOSE.
    
    
    --------------------------------------------------------
    Check mysqlreport version:
    --------------------------------------------------------
    mysqlreport v3.5-maria11 Jul 4 2013
    
    --------------------------------------------------------
    Check pure-ftpd Version:
    --------------------------------------------------------
    pure-ftpd v1.0.42
    
    --------------------------------------------------------
    Check YUM Repo List
    --------------------------------------------------------
    Loaded plugins: fastestmirror, priorities, versionlock
    Loading mirror speeds from cached hostfile
     * base: mirrors.coreix.net
     * epel: mirrors.coreix.net
     * extras: mirrors.coreix.net
     * rpmforge: ftp.nluug.nl
     * updates: mirrors.coreix.net
    215 packages excluded due to repository priority protections
    repo id                       repo name                              status
    base/7/x86_64                 CentOS-7 - Base                        7,420+2,171
    *epel/x86_64                  Extra Packages for Enterprise Linux 7   11,330+922
    extras/7/x86_64               CentOS-7 - Extras                              329
    mariadb                       MariaDB                                       14+2
    rpmforge                      RHEL 7 - RPMforge.net - dag                139+106
    updates/7/x86_64              CentOS-7 - Updates                       1,484+425
    varnishcache_varnish41/x86_64 varnishcache_varnish41                          46
    varnishcache_varnish41-source varnishcache_varnish41-source                    0
    repolist: 20,762
    
    --------------------------------------------------------
    mytimes check:
    /usr/bin/mytimes
    --------------------------------------------------------
    Mon Jan 29 18:46:28 UTC 2018    [UTC]
    Tue Jan 30 04:46:28 AEST 2018   [Australia/Brisbane]
    Mon Jan 29 10:46:28 PST 2018    [America/Los_Angeles]
    Mon Jan 29 12:46:28 CST 2018    [America/Chicago]
    Mon Jan 29 13:46:28 EST 2018    [America/New_York]
    Mon Jan 29 13:46:28 EST 2018    [America/Montreal]
    Mon Jan 29 18:46:28 GMT 2018    [Europe/London]
    Mon Jan 29 19:46:28 CET 2018    [Europe/Berlin]
    Tue Jan 30 01:46:28 +07 2018    [Asia/Bangkok]
    Tue Jan 30 01:46:28 +07 2018    [Asia/Ho_Chi_Minh]
    Tue Jan 30 01:46:28 WIB 2018    [Asia/Jakarta]
    Tue Jan 30 02:46:28 +08 2018    [Asia/Kuala_Lumpur]
    Tue Jan 30 02:46:28 +08 2018    [Asia/Singapore]
    --------------------------------------------------------
    *************************************************
    * Centmin Mod install completed....
    *************************************************
    
    [​IMG]

    As you'd expect it's fairly nippy. You can find the full Centmin Mod benchmark here.
     
    • Like Like x 1
  5. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    Looking good and install times close to my Vultr Bare Metal E3-1270v6 4C/8T times too - expected I suppose
     
  6. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    Is that the $120 promo machine? From that thread I found your summary comparison which makes VMHaus look really good in that context.

    • $7 per month VMHaus 2GB 2 CPU installs in ~ 702 seconds
    • $14 per month VMHaus 4GB 4 CPU installs in ~ 585 seconds
     
  7. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    Yup from $120 vultr promo so yes comparatively very good. If you can get fast 4-8 high clocked cpu threads, install times should be sub 600-700s
     
  8. Matt

    Matt Moderator Staff Member

    736
    337
    63
    May 25, 2014
    Sheffield, UK
    Ratings:
    +490
    Local Time:
    5:09 PM
    1.7.1
    MariaDB 10
    VMHaus use Clouvider hardware with their own network on top of it (for the UK based KVM slices). I've got 4 of the same spec'd dedicated servers from Clouvider currently, and they are a great bit of kit.
     
    • Informative Informative x 2
  9. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    Ah thanks for that info. Clouvider and VMHause definitely looks strong for UK/Europe location. Tempted to replace my Vultr London VPS for my cluster :D
     
  10. Matt

    Matt Moderator Staff Member

    736
    337
    63
    May 25, 2014
    Sheffield, UK
    Ratings:
    +490
    Local Time:
    5:09 PM
    1.7.1
    MariaDB 10
    Their Bonsai portal is lacking in features, but they apparently have a lot more planned for 2018. I've still got a 256MB annual instance for $15 with them :)
     
    • Informative Informative x 1
  11. bassie

    bassie Active Member

    670
    158
    43
    Apr 29, 2016
    Ratings:
    +458
    Local Time:
    6:09 PM
    @cooper How do you like your server after a day or 5?
     
  12. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    I haven't had time to do anything with it since I ran those initial benchmarks. I plan on moving a site over from Linode sometime next week hopefully. I've never migrated an SSL (Let's Encrypt) site in Centmin Mod, or ever actually, so I need to find time to read the documentation. Once that's done I'll provide a bit more feedback.
     
  13. wmtech

    wmtech New Member

    26
    12
    3
    Jul 22, 2017
    Ratings:
    +20
    Local Time:
    6:09 PM
    If you move Let's Encrypt sites, don't forget to move /root/.acme.sh directory over to the new server. Otherwise the renewal does not work automatically.

    When setting up the host at the new server choose LE live cert which will fail because DNS is still at the old server. But after moving the old cert from the old server, the site will work and after moving the .acme.sh directory the renewal will also work as expected.
     
    • Informative Informative x 2
  14. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    Yeah if you copy them from /usr/local/nginx/conf/ssl/yourdomain.com directory along with nginx vhost files (/usr/local/nginx/conf/conf.d/yourdomain.com.conf and /usr/local/nginx/conf/conf.d/yourdomain.com.ssl.conf), they will work. One thing is with letsencrypt they need auto renewal as they have 90 day expiry, so you need to setup addons/acmetool.sh via acmeinstall command on new server
    Code (Text):
    ./acmetool.sh acmeinstall

    and then copy over the /root/.acme.sh/yourdomain.com directory too which contains the details acme.sh client needs for auto renew cronjobs.
     
    • Informative Informative x 1
  15. cooper

    cooper New Member

    24
    11
    3
    Jan 28, 2018
    Ratings:
    +13
    Local Time:
    5:09 PM
    • Like Like x 1
  16. ArisC

    ArisC Member

    61
    16
    8
    Jun 1, 2017
    Ratings:
    +24
    Local Time:
    7:09 PM
    Nginx 1.13.6
    MariaDB 10.1.28
    I think that they reselling ovh dedi servers....
     
  17. Matt

    Matt Moderator Staff Member

    736
    337
    63
    May 25, 2014
    Sheffield, UK
    Ratings:
    +490
    Local Time:
    5:09 PM
    1.7.1
    MariaDB 10
    You are 100% incorrect. They rent their servers from the same supplier that I do.
     
    • Informative Informative x 1
  18. eva2000

    eva2000 Administrator Staff Member

    32,303
    7,172
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +10,906
    Local Time:
    3:09 AM
    Nginx 1.13.x
    MariaDB 5.5
    Yeah OVH capped at 250-500Mbps bandwidth and upgrades to 1Gbps are expensive so doubt they're reselling OVH
     
  19. ArisC

    ArisC Member

    61
    16
    8
    Jun 1, 2017
    Ratings:
    +24
    Local Time:
    7:09 PM
    Nginx 1.13.6
    MariaDB 10.1.28
    @Matt Could you share your supplier?
     
  20. Matt

    Matt Moderator Staff Member

    736
    337
    63
    May 25, 2014
    Sheffield, UK
    Ratings:
    +490
    Local Time:
    5:09 PM
    1.7.1
    MariaDB 10
     
    • Like Like x 1
    • Funny Funny x 1