WP Rocket installation on Nginx

Mrbo · Feb 25, 2019

Hi! I found these two guides to optimize WP Rocket with Nginx but the first paragraph doesnt seem to be correct: "cd /etc/nginx". Do I need to go into another folder for CentOs7? "/home/nginx/"? And is it alright to follow the guide afterwards or can it cause some conflicts with the centminmod stack?

https://github.com/maximejobin/rocket-nginx
https://wordpresssupercharged.com/how-to-install-wp-rocket-on-nginx/

eva2000 · Feb 25, 2019

I believe a few folks here on this forum us WP Rocket, you can try searching the forums

FYI, Centmin Mod installs Nginx in /usr/local/nginx instead of /etc/nginx

Mrbo · Feb 25, 2019

eva2000 said: ↑

I believe a few folks here on this forum us WP Rocket, you can try searching the forums

FYI, Centmin Mod installs Nginx in /usr/local/nginx instead of /etc/nginx
Click to expand...

I tried to search for wp rocket on the forum but nobody seems to have tried to implement the modification recommended by wp rocket for nginx servers. Its recommended by them since wp-rocket doesnt write to the .htaccess file on nginx.

I managed to install the modification now. I just have one more question before I can test it and see if it made any performance improvements. Which file do they refer to to modify in the centminmod stack?

Then, in your configuration file, you must include the configuration. If your websites configurations are in /etc/nginx/sites-available, you need to alter your configuration:

server {
...

# Rocket-Nginx configuration
include rocket-nginx/default.conf;

...
}
Click to expand...

Ps: Do I need to make any additional change if I installed wordpress through cmm menu option 22 with wp super cache? Saw that you recommended some changes on this old thread.

eva2000 · Feb 25, 2019

that's your nginx site/domain vhost config files https://centminmod.com/configfiles.html

/usr/local/nginx/conf/conf.d/yourdomain.com.conf - http Nginx vhost configuration file for your site. Note: If moving servers, you can either backup and transfer these files to new server, or on new server recreate the Nginx vhosts and manually transpose your settings from backed up files to your new Nginx site domain vhost files at same directory on new server. If you did the above outlined step of backing up /usr/local/nginx/conf/conf.d directory, you would of already backed up this Nginx vhost config file.

/usr/local/nginx/conf/conf.d/yourdomain.com.ssl.conf - https Nginx vhost configuration file for your site if you elected to setup self-signed SSL certificate at Nginx vhost creation time via centmin.sh menu option 2 outlined here. Note: If moving servers, you can either backup and transfer these files to new server, or on new server recreate the Nginx vhosts and manually transpose your settings from backed up files to your new Nginx site domain vhost files at same directory on new server. If you did the above outlined step of backing up /usr/local/nginx/conf/conf.d directory, you would of already backed up this Nginx vhost config file.

Click to expand...

fabianski · Mar 9, 2019

Mrbo said: ↑

Hi! I found these two guides to optimize WP Rocket with Nginx but the first paragraph doesnt seem to be correct: "cd /etc/nginx". Do I need to go into another folder for CentOs7? "/home/nginx/"? And is it alright to follow the guide afterwards or can it cause some conflicts with the centminmod stack?

maximejobin/rocket-nginx
Guide: WP Rocket Installation On NGINX [August 2018]
Click to expand...

Hi,
Did you get set up?
Here is the cache working, but I can not access any page other than the initial one I receive error 404.
I think this happens because of the permanent links of wordpress ...

fabianski · Mar 9, 2019

eva2000 said: ↑

that's your nginx site/domain vhost config files Centmin Mod Configuration Files - CentminMod.com LEMP Nginx web stack for CentOS
Click to expand...

@eva2000 can you help me solve this problem with permanent links?
I used the wordpress installation through menu option 22 and chose the enabler cache, then removed using this tutorial:

Wordpress - Disable Or Remove KeyCDN Cache Enabler

For the configuration of wp rocket with nginx I used this one:
maximejobin/rocket-nginx

I think this could also be because of the default nginx folder ... Since the plugin configuration uses the folder /etc/nginx instead of /usr/local/nginx

I used the following commands
cd /usr/local/nginx
git clone maximejobin/rocket-nginx
cd rocket-nginx
cp rocket-nginx.ini.disabled rocket-nginx.ini
php rocket-parser.php

thanks in advance

Mrbo · Mar 12, 2019

You need to add this,
include /usr/local/nginx/rocket-nginx/default.conf; ,to your vhost file which is located at /usr/local/nginx/conf/conf.d/ . And then you need to comment cache enabler, wp-supercache or redis, comment out wordpress permalinks and change all instances of php-wpsc to just php. This is how my vhost file look like.

Code:

#x# HTTPS-DEFAULT
 server {
  
   server_name mywebsite.com www.mywebsite.com;
   return 302 https://mywebsite.com$request_uri;
   include /usr/local/nginx/conf/staticfiles.conf;
 }

server {
  listen 443 ssl http2;
  server_name mywebsite.com www.mywebsite.com;

  include /usr/local/nginx/conf/ssl/mywebsite.com/mywebsite.com.crt.key.conf;
  include /usr/local/nginx/conf/ssl_include.conf;

  # cloudflare authenticated origin pull cert community.centminmod.com/threads/13847/
  ssl_client_certificate /usr/local/nginx/conf/ssl/cloudflare/mywebsite.com/origin.crt;
  ssl_verify_client on;
  http2_max_field_size 16k;
  http2_max_header_size 32k;
  # mozilla recommended
  ssl_ciphers TLS13-AES-128-GCM-SHA256:TLS13-AES-256-GCM-SHA384:TLS13-CHACHA20-POLY1305-SHA256:TLS13-AES-128-CCM-8-SHA256:TLS13-AES-128-CCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS;
  ssl_prefer_server_ciphers   on;
  #add_header Alternate-Protocol  443:npn-spdy/3;

  # before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
  #add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
  #add_header X-Frame-Options SAMEORIGIN;
  add_header X-Xss-Protection "1; mode=block" always;
  add_header X-Content-Type-Options "nosniff" always;
  #add_header Referrer-Policy "strict-origin-when-cross-origin";
  #spdy_headers_comp 5;
  ssl_buffer_size 1369;
  ssl_session_tickets on;
 
  # enable ocsp stapling
  #resolver 8.8.8.8 8.8.4.4 1.1.1.1 1.0.0.1 valid=10m;
  #resolver_timeout 10s;
  #ssl_stapling on;
  #ssl_stapling_verify on;

# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;

  # limit_conn limit_per_ip 16;
  # ssi  on;

  access_log /home/nginx/domains/mywebsite.com/log/access.log combined buffer=256k flush=5m;
  error_log /home/nginx/domains/mywebsite.com/log/error.log;

  include /usr/local/nginx/conf/autoprotect/mywebsite.com/autoprotect-mywebsite.com.conf;
  root /home/nginx/domains/mywebsite.com/public;
  # uncomment cloudflare.conf include if using cloudflare for
  # server and/or vhost site
  include /usr/local/nginx/conf/cloudflare.conf;
  include /usr/local/nginx/conf/503include-main.conf;

  include /usr/local/nginx/rocket-nginx/default.conf;
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpcacheenabler_mywebsite.com.conf;
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpsupercache_mywebsite.com.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/rediscache_mywebsite.com.conf; 

  location / {
  include /usr/local/nginx/conf/503include-only.conf;
 

  # Enables directory listings when index file not found
  #autoindex  on;

  # for wordpress super cache plugin
  #try_files /wp-content/cache/supercache/$http_host/$cache_uri/index.html $uri $uri/ /index.php?q=$uri&$args;

  # for wp cache enabler plugin
  #try_files $cache_enabler_uri $uri $uri/ $custom_subdir/index.php?$args; 

  # Wordpress Permalinks
  try_files $uri $uri/ /index.php?q=$uri&$args;

  # Nginx level redis Wordpress
  # https://community.centminmod.com/posts/18828/
  #try_files $uri $uri/ /index.php?$args;

  }

location ~* /(wp-login\.php) {
    limit_req zone=xwplogin burst=1 nodelay;
    #limit_conn xwpconlimit 30;
    #auth_basic "Private";
    #auth_basic_user_file /home/nginx/domains/mywebsite.com/htpasswd_wplogin;   
    include /usr/local/nginx/conf/php.conf;
    
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /(xmlrpc\.php) {
    limit_req zone=xwprpc burst=45 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
    
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /wp-admin/(load-scripts\.php) {
    limit_req zone=xwprpc burst=5 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
    
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /wp-admin/(load-styles\.php) {
    limit_req zone=xwprpc burst=5 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
    
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

  include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpsecure_mywebsite.com.conf;
  include /usr/local/nginx/conf/php.conf;
 
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/php-rediscache.conf;
  include /usr/local/nginx/conf/pre-staticfiles-local-mywebsite.com.conf;
  include /usr/local/nginx/conf/pre-staticfiles-global.conf;
  include /usr/local/nginx/conf/staticfiles.conf;
  include /usr/local/nginx/conf/drop.conf;
  #include /usr/local/nginx/conf/errorpage.conf;
  include /usr/local/nginx/conf/vts_server.conf;
}

fabianski · Apr 4, 2019

Mrbo said: ↑

You need to add this,
include /usr/local/nginx/rocket-nginx/default.conf; ,to your vhost file which is located at /usr/local/nginx/conf/conf.d/ . And then you need to comment cache enabler, wp-supercache or redis, comment out wordpress permalinks and change all instances of php-wpsc to just php. This is how my vhost file look like.

Code:

#x# HTTPS-DEFAULT
 server {
 
   server_name mywebsite.com www.mywebsite.com;
   return 302 https://mywebsite.com$request_uri;
   include /usr/local/nginx/conf/staticfiles.conf;
 }

server {
  listen 443 ssl http2;
  server_name mywebsite.com www.mywebsite.com;

  include /usr/local/nginx/conf/ssl/mywebsite.com/mywebsite.com.crt.key.conf;
  include /usr/local/nginx/conf/ssl_include.conf;

  # cloudflare authenticated origin pull cert community.centminmod.com/threads/13847/
  ssl_client_certificate /usr/local/nginx/conf/ssl/cloudflare/mywebsite.com/origin.crt;
  ssl_verify_client on;
  http2_max_field_size 16k;
  http2_max_header_size 32k;
  # mozilla recommended
  ssl_ciphers TLS13-AES-128-GCM-SHA256:TLS13-AES-256-GCM-SHA384:TLS13-CHACHA20-POLY1305-SHA256:TLS13-AES-128-CCM-8-SHA256:TLS13-AES-128-CCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS;
  ssl_prefer_server_ciphers   on;
  #add_header Alternate-Protocol  443:npn-spdy/3;

  # before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
  #add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
  #add_header X-Frame-Options SAMEORIGIN;
  add_header X-Xss-Protection "1; mode=block" always;
  add_header X-Content-Type-Options "nosniff" always;
  #add_header Referrer-Policy "strict-origin-when-cross-origin";
  #spdy_headers_comp 5;
  ssl_buffer_size 1369;
  ssl_session_tickets on;
 
  # enable ocsp stapling
  #resolver 8.8.8.8 8.8.4.4 1.1.1.1 1.0.0.1 valid=10m;
  #resolver_timeout 10s;
  #ssl_stapling on;
  #ssl_stapling_verify on;

# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;

  # limit_conn limit_per_ip 16;
  # ssi  on;

  access_log /home/nginx/domains/mywebsite.com/log/access.log combined buffer=256k flush=5m;
  error_log /home/nginx/domains/mywebsite.com/log/error.log;

  include /usr/local/nginx/conf/autoprotect/mywebsite.com/autoprotect-mywebsite.com.conf;
  root /home/nginx/domains/mywebsite.com/public;
  # uncomment cloudflare.conf include if using cloudflare for
  # server and/or vhost site
  include /usr/local/nginx/conf/cloudflare.conf;
  include /usr/local/nginx/conf/503include-main.conf;

  include /usr/local/nginx/rocket-nginx/default.conf;
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpcacheenabler_mywebsite.com.conf;
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpsupercache_mywebsite.com.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/wpincludes/mywebsite.com/rediscache_mywebsite.com.conf;

  location / {
  include /usr/local/nginx/conf/503include-only.conf;
 

  # Enables directory listings when index file not found
  #autoindex  on;

  # for wordpress super cache plugin
  #try_files /wp-content/cache/supercache/$http_host/$cache_uri/index.html $uri $uri/ /index.php?q=$uri&$args;

  # for wp cache enabler plugin
  #try_files $cache_enabler_uri $uri $uri/ $custom_subdir/index.php?$args;

  # Wordpress Permalinks
  try_files $uri $uri/ /index.php?q=$uri&$args;

  # Nginx level redis Wordpress
  # https://community.centminmod.com/posts/18828/
  #try_files $uri $uri/ /index.php?$args;

  }

location ~* /(wp-login\.php) {
    limit_req zone=xwplogin burst=1 nodelay;
    #limit_conn xwpconlimit 30;
    #auth_basic "Private";
    #auth_basic_user_file /home/nginx/domains/mywebsite.com/htpasswd_wplogin;  
    include /usr/local/nginx/conf/php.conf;
   
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /(xmlrpc\.php) {
    limit_req zone=xwprpc burst=45 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
   
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /wp-admin/(load-scripts\.php) {
    limit_req zone=xwprpc burst=5 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
   
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /wp-admin/(load-styles\.php) {
    limit_req zone=xwprpc burst=5 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php.conf;
   
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

  include /usr/local/nginx/conf/wpincludes/mywebsite.com/wpsecure_mywebsite.com.conf;
  include /usr/local/nginx/conf/php.conf;
 
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/php-rediscache.conf;
  include /usr/local/nginx/conf/pre-staticfiles-local-mywebsite.com.conf;
  include /usr/local/nginx/conf/pre-staticfiles-global.conf;
  include /usr/local/nginx/conf/staticfiles.conf;
  include /usr/local/nginx/conf/drop.conf;
  #include /usr/local/nginx/conf/errorpage.conf;
  include /usr/local/nginx/conf/vts_server.conf;
}

Click to expand...

I did this but I still get a 404 error when accessing any page except the home page
I already tried to update the permanent links in the wordpress panel but without success.

mrkip · Apr 5, 2019

Mrbo instructions worked for me. Cheers
@fabianski Are you sure you changed all the php-wpsc to php. Make sure you do a search for them in nano using Ctrl+W. There are quite a few instances of them in the the nginx config file.
Also, double check that the permalinks directive is commented out in nginx file. I had the same problem until i commented the following line
Code:
# Wordpress Permalinks
 # try_files $uri $uri/ /index.php?q=$uri&$args;
to
Code:
# Wordpress Permalinks
  try_files $uri $uri/ /index.php?q=$uri&$args;

fabianski · Jun 13, 2019

Code:
try_files $uri $uri/ /index.php?q=$uri&$args;
Using this setting for permanent links creates the cache file in a wrong folder

It ends up getting inside a subfolder and nginx will not serve it since it is looking in another folder ...
Code:
Wrong folder

/home/nginx/domains/domain.com/public/wp-content/cache/wp-rocket/domain.com/blog/post/_q=%2fpost%2f/file.html
To solve, we have to change to this
Code:
try_files $uri $uri/ /index.php?$args;
It will no longer create a subfolder and will serve the cache file correctly
Code:
Correct folder
/home/nginx/domains/domain.com/public/wp-content/cache/wp-rocket/domain.com/blog/post/_q=%2fpost%2f/file.html
To see these details it is necessary to activate the debug mode in the file rocket-nginx.ini
Code:
debug = true
Another thing I was in trouble with was the headers, to solve this it is necessary to put the ones you use in the file rocket-nginx.ini

Code:

; HTTP(S) headers ; ... http_header[X-Frame-Options]="SAMEORIGIN" http_header[X-XSS-Protection]="1; mode=block" http_header[X-Content-Type-Options]="nosniff" ; HSTS header value ; ... header_hsts = "max-age=31536000"

Then just update the configuration file again and restart nginx
Code:
php rocket-nginx.ini
php rocket-parser.php
service nginx restart
I think with this my doubts with wp rocket are over

eva2000 · Jun 13, 2019

nice @fabianski and @Mrbo thanks for sharing your workarounds, i am sure other wp rocket users will appreciate this

BamaStangGuy · Jun 13, 2019

I love me some WP Rocket.

EckyBrazzz · Jul 11, 2019

Yep Wp Rocket... My idea of today. Got a specail offer with a discount of 25% for the infinify one. Spent $186.75 and followed the steps above.

Loved it at first but a better look and all WebP, the WepP Express that worked before, it's simply gone.

Placed a backup and on each step verified the existens of our WebP images, well they disapear at the moment that you install WP Rocket.

No more WebP images on my page.

They want you to install imagify to get support for WebP, but we have our whitelisted WebPExpress.
I installed it, the plugin imagify and disabled all options except to display WebP images, but nothing seems to work. Got the API key and some credits. (hmm, 25MB/month free to optimize) --> WebPExpress does it for free.

@eva2000 I need some help here, it's a little unfair of WP-Rocket. I disabled the autoproction in the conf.ssl, the wpinclude but on CMM it is a no go.

But sadly as I was when I checked webpagetest.org. Our beautiful WebPExpress is with WP Rocket a no go.

eva2000 · Jul 11, 2019

EckyBrazzz said: ↑

I need some help here, it's a little unfair of WP-Rocket. I disabled the autoproction in the conf.ssl, the wpinclude but on CMM it is a no go.

But sadly as I was when I checked webpagetest.org. Our beautiful WebPExpress is with WP Rocket a no go.
Click to expand...

probably WP-Nginx nginx rules are overriding Centmin Mod's default WebP conditional serving code Nginx Serving WebP Images Conditionally Demo or their WebP images aren't named in format original.png.webp or original.jpg.webp

EckyBrazzz · Jul 11, 2019

How to resolve it? Only a complete removal of the plugin will work.

EckyBrazzz · Jul 11, 2019

imagify plugins converts the ericson igmage the same way as the WebPExpress

Code (Text):

-rw-r--r-- 1 nginx nginx 8.1K Jul  9 10:23 80px-Expert.jpg
-rw-r--r-- 1 nginx nginx 3.4K Jul  9 10:23 80px-Expert.jpg.webp
-rw-r--r-- 1 nginx nginx  48K Jul 11 05:04 ericson-1180x355.png
-rw-r--r-- 1 nginx nginx 5.4K Jul 11 05:04 ericson-1180x355.png.webp
-rw-r--r-- 1 nginx nginx  12K Jul 11 05:04 ericson-146x146.png
-rw-r--r-- 1 nginx nginx 3.5K Jul 11 05:04 ericson-146x146.png.webp
-rw-r--r-- 1 nginx nginx  12K Jul 11 05:04 ericson-150x150.png
-rw-r--r-- 1 nginx nginx 3.6K Jul 11 05:04 ericson-150x150.png.webp
-rw-r--r-- 1 nginx nginx  15K Jul 11 05:04 ericson-237x175.png
-rw-r--r-- 1 nginx nginx 4.4K Jul 11 05:04 ericson-237x175.png.webp
-rw-r--r-- 1 nginx nginx  50K Jul 11 05:04 ericson-676x390.png
-rw-r--r-- 1 nginx nginx 7.6K Jul 11 05:04 ericson-676x390.png.webp
-rw-r--r-- 1 nginx nginx 5.5K Jul 11 05:04 ericson-80x80.png
-rw-r--r-- 1 nginx nginx 1.8K Jul 11 05:04 ericson-80x80.png.webp
-rw-r--r-- 1 nginx nginx 3.3K Jul 11 05:04 ericson.png
-rw-r--r-- 1 nginx nginx 4.0K Jul 11 05:04 ericson.png.webp

EckyBrazzz · Jul 11, 2019

Not a singel PNG or JPG image shows up. On the red arrow should be the erison logo

eva2000 · Jul 11, 2019

EckyBrazzz said: ↑

How to resolve it? Only a complete removal of the plugin will work.
Click to expand...

no idea as I don't use or have ever used WP-Rocket - seems the urls they serve from are image.jpg.webp though from your browser network tab screenshots which is probably why

fabianski · Jul 11, 2019

I also use wp-rocket with the webp express and I have no problem, the images are served correctly
http://prntscr.com/odncwb
Screenshot

EckyBrazzz · Jul 12, 2019

@fabianski Obrigado! I know that I should work, I was reading a lot about it and there are many people that have wp-rocket working with different plugins what produce WebP images. That's why I bought with full faith the infinity version because it should work.

I also used your tip about the warm-cache.

I followed the instructions by the letter, even compared the wp.conf and wp-wpsc.conf, but the diff only showed 1 difference. Now, at the moment that I install wp-rocket, WebP stops working.

Question/request: Can you please post on a private gist or for you any for convenience place your plugins, settings, config files (please remove any domains' etc) and send me a message(conversation) with the links. It would help me a lot to solve this problem.

fabianski · Jul 12, 2019

Well, I use wp-rocket only for caching, other functions of it like minification I leave disabled.

The webpexpress is set up as eva explained in the tutorial.

The only difference is in this part:

you can do that by editing wpsecure for your wordpress site i.e. for my funky.domain.com wordpress site would be at
/usr/local/nginx/conf/wpincludes/funky.domain.com/wpsecure_funky.domain.com.conf
and adding right after nginx-helper log blocking location context the following

# webp extension support if you are converting /uploads images to webp
...
Click to expand...

I added this rule to the file /nginx/conf/conf.d/mydomain.org.ssl.conf rather than /nginx/conf/wpincludes/mydomain.org.ssl.conf

My nginx settings are here: View Paste T89ke

Log in / Register

Forums

Join the community today

WP Rocket installation on Nginx

Mrbo Member

eva2000 Administrator Staff Member

Mrbo Member

eva2000 Administrator Staff Member

fabianski Member

fabianski Member

Mrbo Member

fabianski Member

mrkip Premium Member Premium Member

fabianski Member

eva2000 Administrator Staff Member

BamaStangGuy Active Member

EckyBrazzz Active Member

eva2000 Administrator Staff Member

EckyBrazzz Active Member

EckyBrazzz Active Member

EckyBrazzz Active Member

eva2000 Administrator Staff Member

fabianski Member

EckyBrazzz Active Member

fabianski Member

.

Log in / Register

Useful Searches

Join the community today

WP Rocket installation on Nginx

Mrbo Member

eva2000 Administrator Staff Member

Mrbo Member

eva2000 Administrator Staff Member

fabianski Member

fabianski Member

Mrbo Member

fabianski Member

mrkip Premium Member Premium Member

fabianski Member

eva2000 Administrator Staff Member

BamaStangGuy Active Member

EckyBrazzz Active Member

eva2000 Administrator Staff Member

EckyBrazzz Active Member

EckyBrazzz Active Member

EckyBrazzz Active Member

eva2000 Administrator Staff Member

fabianski Member

EckyBrazzz Active Member

fabianski Member

.