/ Register

Learn about Centmin Mod LEMP Stack today
Become a Member

Post your Centmin Mod 130.00beta01 install time stats

Discussion in 'Install & Upgrades or Pre-Install Questions' started by eva2000, May 8, 2022.

Tags:
Previous Thread Next Thread
Loading...
Page 1 of 2
  1. May 8, 2022 #1
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Starting a thread where folks can post their Centmin Mod 130.00beta01 install time statistics outputted at end of initial install time via curl installer method.

    Install Command of fresh virgin CentOS 7 OS systems

    with PHP 7.4 default
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh

    Or specifically with PHP 7.4
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller74.sh && chmod 0700 betainstaller74.sh && bash betainstaller74.sh

    Or default initial install with PHP 8.0
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller80.sh && chmod 0700 betainstaller80.sh && bash betainstaller80.sh

    Or default initial install with PHP 8.1
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller81.sh && chmod 0700 betainstaller81.sh && bash betainstaller81.sh

    Install times are dependent on the number of cpu cores/threads your server has, the clock speed of processors, disk I/O performance and general network connectivity speeds due to downloads via YUM and source downloads. So the install times serve as a general benchmark showing how fast your server or VPSes specs are :)

    So list your web host and server specs and the install time stats at end of the initial Centmin Mod curl installer run in CODE tags. How to use forum BBCODE code tags :)
     
  2. May 8, 2022 #2
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Upcloud.com 4 CPU KVM VPS US$40/month New York City location with CentOS 7.9 64bit
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 90.3668 seconds
Total YUM Time: 10.027951843 seconds
Total YUM or DNF + Source Download Time: 29.8469
Total Nginx First Time Install Time: 203.7855
Total PHP First Time Install Time: 253.7371
Download From Github Time: 0.8676
Total Time Other eg. source compiles: 330.5321
Total Centmin Mod Install Time: 817.9017
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 909.1361 seconds
---------------------------------------------------------------------------
4 AMD EPYC 7542 32-Core Processor
4 2894.560
---------------------------------------------------------------------------
Install summary logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  3. May 14, 2022 #3
    victor

    victor New Member

    15
    0
    1
    Apr 9, 2015
    Slovenia
    Ratings:
    +3
    Local Time:
    4:03 PM
    MariaDB 10
    php-friends . de ~4$ per month

    Code:
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh
    Code:
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 196.6177 seconds
Total YUM Time: 15.485935008 seconds
Total YUM or DNF + Source Download Time: 44.5347
Total Nginx First Time Install Time: 1298.2525
Total PHP First Time Install Time: 601.8066
Download From Github Time: 2.4276
Total Time Other eg. source compiles: 662.1601
Total Centmin Mod Install Time: 2606.7539
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 2805.7992 seconds
---------------------------------------------------------------------------
2 Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz
2 2199.998
---------------------------------------------------------------------------
Install summary logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  4. May 15, 2022 #4
    Matt Williams

    Matt Williams WordPress Fanatic

    537
    104
    43
    Nov 22, 2014
    Virginia, USA
    Ratings:
    +157
    Local Time:
    8:03 AM
    latest
    10
    My own VPS - Virtualizor ( KVM based ) - VPS has 2CPU cores / 4GB ram with CentOS 7.9 64bit Location: Ashburn, VA.

    Code:
    yum -y update; curl -O https://centminmod.com/betainstaller81.sh && chmod 0700 betainstaller81.sh && bash betainstaller81.sh
    Code:
    Total Curl Installer YUM or DNF Time: 102.1456 seconds
Total YUM Time: 13.539374093 seconds
Total YUM or DNF + Source Download Time: 38.3553
Total Nginx First Time Install Time: 402.6197
Total PHP First Time Install Time: 1299.9805
Download From Github Time: 0.8390
Total Time Other eg. source compiles: 299.9538
Total Centmin Mod Install Time: 2040.9092
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 2143.8938 seconds
---------------------------------------------------------------------------
2 AMD EPYC 7302P 16-Core Processor
2 3000.000
---------------------------------------------------------------------------
     
  5. May 16, 2022 #5
    cloud9

    cloud9 Premium Member Premium Member

    431
    117
    43
    Oct 6, 2015
    England
    Ratings:
    +217
    Local Time:
    1:03 PM
    1.25.3
    10.6.x
    Hetzner CCX12 (Dedicated) Ashburn VA €23.88/month

    Code:
    curl -O https://centminmod.com/betainstaller81.sh && chmod 0700 betainstaller81.sh && bash betainstaller81.sh


    Code:
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 163.6677 seconds
Total YUM Time: 12.925808294 seconds
Total YUM or DNF + Source Download Time: 40.5844
Total Nginx First Time Install Time: 379.2399
Total PHP First Time Install Time: 586.9436
Download From Github Time: 0.8299
Total Time Other eg. source compiles: 344.1773
Total Centmin Mod Install Time: 1350.9452
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 1515.4428 seconds
---------------------------------------------------------------------------
2 AMD EPYC Processor
2 2445.404
---------------------------------------------------------------------------
     
  6. May 17, 2022 #6
    Matt Williams

    Matt Williams WordPress Fanatic

    537
    104
    43
    Nov 22, 2014
    Virginia, USA
    Ratings:
    +157
    Local Time:
    8:03 AM
    latest
    10
    Code:
    yum -y update; curl -O https://centminmod.com/betainstaller81.sh && chmod 0700 betainstaller81.sh && bash betainstaller81.sh
    Code:
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 103.1054 seconds
Total YUM Time: 15.087743427 seconds
Total YUM or DNF + Source Download Time: 73.2236
Total Nginx First Time Install Time: 281.8045
Total PHP First Time Install Time: 538.0942
Download From Github Time: 0.8262
Total Time Other eg. source compiles: 312.5495
Total Centmin Mod Install Time: 1205.6717
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 1309.6033 seconds
---------------------------------------------------------------------------
2 AMD EPYC 7302P 16-Core Processor
2 3000.000
---------------------------------------------------------------------------
Install summary logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  7. May 31, 2022 #7
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Latest test of updated MariaDB YUM Repo geolocation mirror routine on Upcloud.com 4 CPU KVM VPS US$40/month New York City location with CentOS 7.9 64bit
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 94.3364 seconds
Total YUM Time: 12.561621123 seconds
Total YUM or DNF + Source Download Time: 33.5076
Total Nginx First Time Install Time: 251.1004
Total PHP First Time Install Time: 242.7652
Download From Github Time: 0.8028
Total Time Other eg. source compiles: 274.2566
Total Centmin Mod Install Time: 801.6298
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 896.7690 seconds
---------------------------------------------------------------------------
4 AMD EPYC 7542 32-Core Processor
4 2894.562
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b29
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  8. Jun 5, 2022 #8
    rdan

    rdan Well-Known Member

    5,443
    1,402
    113
    May 25, 2014
    Ratings:
    +2,194
    Local Time:
    9:03 PM
    Mainline
    10.2
    ---------------------------------------------------------------------------
    Total Curl Installer YUM or DNF Time: 146.4704 seconds
    Total YUM Time: 13.441331232 seconds
    Total YUM or DNF + Source Download Time: 37.6245
    Total Nginx First Time Install Time: 161.0220
    Total PHP First Time Install Time: 99.7832
    Download From Github Time: 4.1199
    Total Time Other eg. source compiles: 110.1468
    Total Centmin Mod Install Time: 408.5765
    ---------------------------------------------------------------------------
    Total Install Time (curl yum + cm install + zip download): 559.1668 seconds
    ---------------------------------------------------------------------------
    16 AMD Ryzen 7 3700X 8-Core Processor
    16 2200.000
    ---------------------------------------------------------------------------
    Centmin Mod Version: 130.00beta01.b41

     
  9. Jun 20, 2022 #9
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Upcloud.com 4 CPU KVM VPS US$40/month New York City location with CentOS 7.9 64bit

    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 91.3691 seconds
Total YUM Time: 13.567861066 seconds
Total YUM or DNF + Source Download Time: 41.8006
Total Nginx First Time Install Time: 179.2314
Total PHP First Time Install Time: 244.1945
Download From Github Time: 0.8883
Total Time Other eg. source compiles: 286.1907
Total Centmin Mod Install Time: 751.4173
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 843.6747 seconds
---------------------------------------------------------------------------
4 AMD EPYC 7542 32-Core Processor
4 2894.562
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b93
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------


    post-install check list
    Code (Text):
    *************************************************
* Post-Install Check List....
*************************************************

--------------------------------------------------------
Check ccache Version:
--------------------------------------------------------
ccache version 3.7.12

Copyright (C) 2002-2007 Andrew Tridgell
Copyright (C) 2009-2020 Joel Rosdahl

This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 3 of the License, or (at your option) any later
version.

--------------------------------------------------------
Check Nginx Version:
--------------------------------------------------------
nginx version: nginx/1.21.6 (190622-225849-centos7-kvm-074afe1)
built by gcc 10.2.1 20210130 (Red Hat 10.2.1-11) (GCC) 
built with OpenSSL 1.1.1o  3 May 2022
TLS SNI support enabled
configure arguments: --with-ld-opt='-Wl,-E -L/usr/local/zlib-cf/lib -L/usr/local/nginx-dep/lib -ljemalloc -Wl,-z,relro -Wl,-rpath,/usr/local/zlib-cf/lib:/usr/local/nginx-dep/lib -flto=4 -fuse-ld=gold' --with-cc-opt='-I/usr/local/zlib-cf/include -I/usr/local/nginx-dep/include -m64 -march=x86-64 -DTCP_FASTOPEN=23 -g -O3 -fstack-protector-strong -flto=4 -fuse-ld=gold --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wno-pointer-sign -Wimplicit-fallthrough=0 -Wno-missing-profile -Wno-implicit-function-declaration -Wno-int-conversion -Wno-unused-result -Wno-unused-result -fcode-hoisting -Wno-cast-function-type -Wno-format-extra-args -Wno-vla-parameter -Wp,-D_FORTIFY_SOURCE=2' --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --build=190622-225849-centos7-kvm-074afe1 --with-compat --without-pcre2 --with-http_stub_status_module --with-http_secure_link_module --with-libatomic --with-http_gzip_static_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module=dynamic --with-http_geoip_module --with-stream_geoip_module --with-stream_realip_module --with-stream_ssl_preread_module --with-threads --with-stream --with-stream_ssl_module --with-http_realip_module --add-dynamic-module=../ngx-fancyindex-0.4.2 --add-module=../ngx_cache_purge-2.5.1 --add-dynamic-module=../ngx_devel_kit-0.3.0 --add-dynamic-module=../set-misc-nginx-module-0.32 --add-dynamic-module=../echo-nginx-module-0.62 --add-module=../redis2-nginx-module-0.15 --add-module=../ngx_http_redis-0.3.7 --add-module=../memc-nginx-module-0.19 --add-module=../srcache-nginx-module-0.32 --add-dynamic-module=../headers-more-nginx-module-0.33 --with-pcre-jit --with-zlib=../zlib-cloudflare-1.3.0 --with-http_ssl_module --with-http_v2_module --with-openssl=../openssl-1.1.1o --with-openssl-opt='enable-ec_nistp_64_gcc_128'

● nginx.service - Centmin Mod NGINX Server
   Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/nginx.service.d
           └─failure-restart.conf, openfileslimit.conf
   Active: active (running) since Sun 2022-06-19 23:08:00 UTC; 12s ago
 Main PID: 7743 (nginx)
   CGroup: /system.slice/nginx.service
           ├─7743 nginx: master process /usr/local/sbin/nginx -c /usr/local/nginx/conf/nginx.con
           ├─7744 nginx: worker process                                   
           └─7745 nginx: worker process                                   

Jun 19 23:08:00 centos-4cpu-8gb-us-nyc1 systemd[1]: Starting Centmin Mod NGINX Server...
Jun 19 23:08:00 centos-4cpu-8gb-us-nyc1 nginx[7738]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Jun 19 23:08:00 centos-4cpu-8gb-us-nyc1 nginx[7738]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Jun 19 23:08:00 centos-4cpu-8gb-us-nyc1 systemd[1]: Started Centmin Mod NGINX Server.

--------------------------------------------------------
Check PHP-FPM Version:
--------------------------------------------------------
PHP 7.4.30 (cli) (built: Jun 19 2022 23:04:28) ( NTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0, Copyright (c) Zend Technologies
    with Zend OPcache v7.4.30, Copyright (c), by Zend Technologies

● php-fpm.service - PHP FastCGI Process Manager
   Loaded: loaded (/usr/lib/systemd/system/php-fpm.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/php-fpm.service.d
           └─failure-restart.conf, limit.conf
   Active: active (running) since Sun 2022-06-19 23:07:58 UTC; 14s ago
 Main PID: 7711 (php-fpm)
   CGroup: /system.slice/php-fpm.service
           └─7711 php-fpm: master process (/usr/local/etc/php-fpm.conf)                                                         

Jun 19 23:07:58 centos-4cpu-8gb-us-nyc1 systemd[1]: Starting PHP FastCGI Process Manager...
Jun 19 23:07:58 centos-4cpu-8gb-us-nyc1 systemd[1]: Started PHP FastCGI Process Manager.

--------------------------------------------------------
Check MariaDB installed RPM Versions:
--------------------------------------------------------
MariaDB-common-10.3.35-1.el7.centos.x86_64
MariaDB-client-10.3.35-1.el7.centos.x86_64
MariaDB-devel-10.3.35-1.el7.centos.x86_64
MariaDB-shared-10.3.35-1.el7.centos.x86_64
MariaDB-server-10.3.35-1.el7.centos.x86_64
MariaDB-compat-10.3.35-1.el7.centos.x86_64

● mariadb.service - MariaDB 10.3.35 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf, notifyaccess.conf, openfileslimit.conf, protecthome.conf
   Active: active (running) since Sun 2022-06-19 23:07:58 UTC; 15s ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
 Main PID: 7655 (mysqld)
   Status: "Taking your SQL requests now..."
   CGroup: /system.slice/mariadb.service
           └─7655 /usr/sbin/mysqld

Jun 19 23:07:57 centos-4cpu-8gb-us-nyc1 systemd[1]: Starting MariaDB 10.3.35 database server...
Jun 19 23:07:57 centos-4cpu-8gb-us-nyc1 mysqld[7655]: 2022-06-19 23:07:57 0 [Note] /usr/sbin/mysqld (mysqld 10.3.35-MariaDB) starting as process 7655 ...
Jun 19 23:07:58 centos-4cpu-8gb-us-nyc1 systemd[1]: Started MariaDB 10.3.35 database server.

--------------------------------------------------------
Check Memcached Server Version:
--------------------------------------------------------
memcached 1.6.15

--------------------------------------------------------
Check Redis Server Version:
--------------------------------------------------------
Redis server v=7.0.2 sha=00000000:0 malloc=jemalloc-5.2.1 bits=64 build=1673698877c7a7af

● redis.service - Redis persistent key-value database
   Loaded: loaded (/usr/lib/systemd/system/redis.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/redis.service.d
           └─failure-restart.conf, limit.conf, user.conf
   Active: active (running) since Sun 2022-06-19 23:07:32 UTC; 41s ago
 Main PID: 2663 (redis-server)
   Status: "Ready to accept connections"
   CGroup: /system.slice/redis.service
           └─2663 /usr/bin/redis-server 127.0.0.1:6379                                           

Jun 19 23:07:32 centos-4cpu-8gb-us-nyc1 systemd[1]: Stopped Redis persistent key-value database.
Jun 19 23:07:32 centos-4cpu-8gb-us-nyc1 systemd[1]: Starting Redis persistent key-value database...
Jun 19 23:07:32 centos-4cpu-8gb-us-nyc1 systemd[1]: Started Redis persistent key-value database.

--------------------------------------------------------
Check CSF Firewall Version:
--------------------------------------------------------
csf: v14.16 (generic)

● csf.service - ConfigServer Firewall & Security - csf
   Loaded: loaded (/usr/lib/systemd/system/csf.service; enabled; vendor preset: disabled)
   Active: active (exited) since Sun 2022-06-19 23:08:05 UTC; 9s ago
 Main PID: 7893 (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/csf.service

Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: ACCEPT  all opt    in * out lo  ::/0  -> ::/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOGDROPOUT  all opt    in * out !lo  ::/0  -> ::/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOGDROPIN  all opt    in !lo out *  ::/0  -> ::/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: csf: FASTSTART loading DNS (IPv4)
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: csf: FASTSTART loading DNS (IPv6)
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOCALOUTPUT  all opt -- in * out !lo  0.0.0.0/0  -> 0.0.0.0/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOCALINPUT  all opt -- in !lo out *  0.0.0.0/0  -> 0.0.0.0/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOCALOUTPUT  all opt    in * out !lo  ::/0  -> ::/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 csf[7893]: LOCALINPUT  all opt    in !lo out *  ::/0  -> ::/0
Jun 19 23:08:05 centos-4cpu-8gb-us-nyc1 systemd[1]: Started ConfigServer Firewall & Security - csf.

● lfd.service - ConfigServer Firewall & Security - lfd
   Loaded: loaded (/usr/lib/systemd/system/lfd.service; enabled; vendor preset: disabled)
   Active: active (running) since Sun 2022-06-19 23:06:30 UTC; 1min 44s ago
 Main PID: 50256 (lfd - sleeping)
   CGroup: /system.slice/lfd.service
           └─50256 lfd - sleepin

Jun 19 23:06:30 centos-4cpu-8gb-us-nyc1 systemd[1]: Starting ConfigServer Firewall & Security - lfd...
Jun 19 23:06:30 centos-4cpu-8gb-us-nyc1 systemd[1]: Started ConfigServer Firewall & Security - lfd.

--------------------------------------------------------
Check Siege Benchmark Version:
--------------------------------------------------------
SIEGE 4.0.4

Copyright (C) 2017 by Jeffrey Fulmer, et al.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.


--------------------------------------------------------
Check mysqlreport version:
--------------------------------------------------------
mysqlreport v3.5-maria11 Jul 4 2013

--------------------------------------------------------
Check pure-ftpd Version:
--------------------------------------------------------
pure-ftpd v1.0.47

--------------------------------------------------------
Check YUM Repo List
--------------------------------------------------------
Loaded plugins: fastestmirror, priorities, versionlock
Loading mirror speeds from cached hostfile
 * base: ewr.edge.kernel.org
 * centos-sclo-rh: centos.mirror.constant.com
 * centos-sclo-sclo: nyc.mirrors.clouvider.net
 * epel: epel.mirror.constant.com
 * extras: nyc.mirrors.clouvider.net
 * updates: mirror.ash.fastserv.com
220 packages excluded due to repository priority protections
repo id                  repo name                                   status
base/7/x86_64            CentOS-7 - Base                             7,774+2,298
centos-sclo-rh/x86_64    CentOS-7 - SCLo rh                             7,845+23
centos-sclo-sclo/x86_64  CentOS-7 - SCLo sclo                                816
epel/x86_64              Extra Packages for Enterprise Linux 7 - x86  12,795+959
extras/7/x86_64          CentOS-7 - Extras                                   512
mariadb                  MariaDB                                            95+6
percona-release-x86_64/7 Percona Original release/x86_64 YUM reposit    2,404+46
prel-release-noarch/7    Percona Release release/noarch YUM reposito           5
updates/7/x86_64         CentOS-7 - Updates                            3,104+771
repolist: 35,350

--------------------------------------------------------
mytimes check:
/usr/bin/mytimes
--------------------------------------------------------
Sun Jun 19 23:08:20 UTC 2022    [UTC]
Mon Jun 20 09:08:20 AEST 2022   [Australia/Brisbane]
Sun Jun 19 16:08:20 PDT 2022    [America/Los_Angeles]
Sun Jun 19 18:08:20 CDT 2022    [America/Chicago]
Sun Jun 19 19:08:20 EDT 2022    [America/New_York]
Sun Jun 19 19:08:20 EDT 2022    [America/Montreal]
Mon Jun 20 00:08:20 BST 2022    [Europe/London]
Mon Jun 20 01:08:20 CEST 2022   [Europe/Berlin]
Mon Jun 20 06:08:20 +07 2022    [Asia/Bangkok]
Mon Jun 20 06:08:20 +07 2022    [Asia/Ho_Chi_Minh]
Mon Jun 20 06:08:20 WIB 2022    [Asia/Jakarta]
Mon Jun 20 07:08:20 +08 2022    [Asia/Kuala_Lumpur]
Mon Jun 20 07:08:20 +08 2022    [Asia/Singapore]
--------------------------------------------------------
     
  10. Jul 25, 2022 #10
    rdan

    rdan Well-Known Member

    5,443
    1,402
    113
    May 25, 2014
    Ratings:
    +2,194
    Local Time:
    9:03 PM
    Mainline
    10.2
    upload_2022-7-25_1-11-50.png

    ---------------------------------------------------------------------------
    Total Curl Installer YUM or DNF Time: 447.8894 seconds
    Total YUM Time: 22.981796767 seconds
    Total YUM or DNF + Source Download Time: 58.1029
    Total Nginx First Time Install Time: 208.4393
    Total PHP First Time Install Time: 353.3726
    Download From Github Time: 2.5951
    Total Time Other eg. source compiles: 246.5449
    Total Centmin Mod Install Time: 866.4597
    ---------------------------------------------------------------------------
    Total Install Time (curl yum + cm install + zip download): 1316.9442 seconds
    ---------------------------------------------------------------------------
    8 Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
    1 1753.332 1 3425.109 1 3532.812 1 3547.546 1 3610.217 1 3612.915 1 3767.932 1 3788.269
    ---------------------------------------------------------------------------
    Centmin Mod Version: 130.00beta01.b119
    Install Summary Logs: /root/centminlogs/installer_summary_links.log
    ---------------------------------------------------------------------------
     
  11. Jul 25, 2022 #11
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    wow slow download times guess due to 100Mbit/s capped speeds!
     
  12. Sep 27, 2022 #12
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Latest Centmin Mod 130.00beta01 on CentOS 7 at Upcloud 4CPU KVM VPS

    With PHP 8.0.23 default installer

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 122.4045 seconds
Total YUM Time: 30.439038769 seconds
Total YUM or DNF + Source Download Time: 55.1503
Total Nginx First Time Install Time: 208.8258
Total PHP First Time Install Time: 300.2226
Download From Github Time: 1.2660
Total Time Other eg. source compiles: 314.8840
Total Centmin Mod Install Time: 879.0827
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 1002.7532 seconds
---------------------------------------------------------------------------
CentOS Linux 7 (3.10.0-1160.41.1.el7.x86_64)
4 AMD EPYC 7542 32-Core Processor
4 2894.562
PHP VERSION: 7.4.30
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b213
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  13. Oct 25, 2022 #13
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Latest Centmin Mod 130.00beta01 on CentOS 7 on new Upcloud announced High CPU 8 Core 12GB memory KVM VPS
    Code (Text):
    yum -y update; curl -O https://centminmod.com/betainstaller.sh && chmod 0700 betainstaller.sh && bash betainstaller.sh

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 104.4145 seconds
Total YUM Time: 13.374094340 seconds
Total YUM or DNF + Source Download Time: 40.4183
Total Nginx First Time Install Time: 138.2616
Total PHP First Time Install Time: 228.9704
Download From Github Time: 1.1459
Total Time Other eg. source compiles: 293.1841
Total Centmin Mod Install Time: 700.8344
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 806.3948 seconds
---------------------------------------------------------------------------
8 AMD EPYC 7542 32-Core Processor
8 2894.562
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b229
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  14. May 13, 2023 #14
    JMX

    JMX New Member

    10
    1
    3
    Mar 5, 2022
    Ratings:
    +6
    Local Time:
    2:03 PM
    10
    Vultr High Frequency ($48/mo)
    Powered by 3GHz+ Intel Xeon CPUs and NVMe SSD.
    3 vCPU | 8 GB | 4.00 TB | 256 GB
    PHP 8.1
    Code:
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 114.7450 seconds
Total YUM Time: 10.711522999 seconds
Total YUM or DNF + Source Download Time: 32.2926
Total Nginx First Time Install Time: 227.0668
Total PHP First Time Install Time: 137.3227
Download From Github Time: 1.9287
Total Time Other eg. source compiles: 305.2524
Total Centmin Mod Install Time: 701.9345
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 818.6082 seconds
---------------------------------------------------------------------------
3 Intel Core Processor (Skylake, IBRS)
3 3791.998
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b332
     
  15. Nov 29, 2023 #15
    allastronauts

    allastronauts New Member

    5
    0
    1
    Nov 28, 2020
    Ratings:
    +1
    Local Time:
    7:03 AM
    I did a few server buys/moves/reprovisions in the middle of the Black Friday/Cyber Monday VPS buying frenzies so I'd be sus with these times with everyone and their families buying and running benchmark scripts this weekend. That said, all my stuff from SSDNodes are E5 Silvers, which are not Ryzens so...

    Code:
    SSDNODES - AlmaLinux 8 - 4 core, 16GB ram, 320 SSD (Not NVMe)

---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 141.6402 seconds
Total YUM Time: 63.144575301 seconds
Total YUM or DNF + Source Download Time: 86.4830
Total Nginx First Time Install Time: 286.8204
Total PHP First Time Install Time: 586.2416
Download From Github Time: 1.1677
Total Time Other eg. source compiles: 379.7056
Total Centmin Mod Install Time: 1339.2507
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 1482.0586 seconds
---------------------------------------------------------------------------
AlmaLinux 8.9 Midnight Oncilla  4.18.0-513.5.1.el8_9.x86_64
4 Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz
4 2099.998
PHP VERSION: 8.0.30
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b466
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
    Above matches the other servers done this weekend more or less, for box stats and install times. Newly fired-up clean server, yum update immediately applied, and your lowendtalk two or three lines of prep commands before running the install script. If you push me on it, even though it's been more than a few years, this probably matches out the previous Centminmod installs on SSDNodes iron. I saw no difference in install times between standard SSD and NVMe's.

    Zero complaints across the board for the Centminmod beta; really glad it went public when it did - timed out well for the moves (to get off Centos 7 finally).

    People say what they say about SSDNodes but aside from the memory being shared-ish, the storage size is legit, and the cpus are the same virtual fair-share you see everywhere else. Outside of maybe an i9, if you need performance its Ryzens (and maybe a top-shelf Epyc), and SSDNodes is carrying what I imagine is a stunningly large amount of E5 silver and gold so I imagine it will be awhile before we see Ryzens there.

    Note to those shopping - they are charging for ipv4 now, and if you have existing servers with them you might want to hold off cancellation if the specs and features are still really good. I'd move entirely over to ipv6 if it were not for legacy bullshit elsewhere with exclusive ipv4 connectivity.

    One of the servers I carried over is an 8 vCpu, 32GB ram, 480 NVMe with ipv4 and backups for 210 / 3 years. At that price, even if it ain't Ryzen, I'm sleeping easy at $6/month and little risk of deadpooling.
     
  16. Mar 14, 2024 #16
    jcstudio

    jcstudio New Member

    5
    1
    3
    Jul 12, 2020
    Tahlequah, OK
    Ratings:
    +3
    Local Time:
    7:03 AM
    1.19.1
    10.5
    Please fill in any relevant information that applies to you:
    • CentOS Version: CentOS 7 64bit
    • Centmin Mod Version Installed: 130.00beta01
    • Nginx Version Installed: 1.25.4
    • PHP Version Installed: 8.2.16
    • MariaDB MySQL Version Installed: 10.4.33
    • When was last time updated Centmin Mod code base ? : ran the one line installer with PHP 8.2

    • Persistent Config: /etc/centminmod/custom_config.inc
      Code (Text):
      NGINX_HPACK='y'
CLOUDFLARE_ZLIB='y'
NGINX_DYNAMICTLS='y'
PHP_PGO='y'
PHPIONCUBE='n'
ENABLE_MARIADBTENTWOUPGRADE='y'
ENABLE_MARIADBTENTHREEUPGRADE='y'
ENABLE_MARIADBTENFOURUPGRADE='y'
PHP_LIBZIP='y'
PHP_ARGON='y'
PHP_BROTLI='y'
PHP_LZFOUR='y'
PHP_LZF='y'
PHP_ZSTD='y'
AUTODETECPHP_OVERRIDE='y'
LETSENCRYPT_DETECT='y'
ACMEDEBUG='y'
PHPFINFO='y'
PHPPGO_INDEXPATH_TWO='/home/nginx/domains/mywebsite.net/public/index.php'
MARCH_TARGETNATIVE='n'
DEVTOOLSETTEN='n'
DEVTOOLSETELEVEN='y'
SELFSIGNEDSSL_ECDSA='y'
PHP_OVERWRITECONF='n'
NGINXBACKUPDIR='/usr/local/nginxbackup'


    • Code (Text):
      [*]---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 84.0199 seconds
Total YUM Time: 13.100525943 seconds
Total YUM or DNF + Source Download Time: 35.5233
Total Nginx First Time Install Time: 151.7999
Total PHP First Time Install Time: 610.4025
Download From Github Time: 0.9509
Total Time Other eg. source compiles: 271.5496
Total Centmin Mod Install Time: 1069.2752
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 1154.2460 seconds
---------------------------------------------------------------------------
CentOS Linux 7 3.10.0-1160.102.1.el7.x86_64
4 AMD EPYC-Milan Processor
4 2295.686
PHP VERSION: 8.2.16 PGO
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b549
    OVH VPS model:
    VPS vps2023-le-4 comes configured with 4 Processors, 4GB RAM, 80GB SDD NVRAM, and 1GB NIC connection
     
  17. Jun 5, 2024 #17
    dooma

    dooma Active Member

    326
    34
    28
    Oct 15, 2016
    Cairo
    Ratings:
    +49
    Local Time:
    3:03 PM
    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 121.4027 seconds
Total YUM Time: 44.085700055 seconds
Total YUM or DNF + Source Download Time: 64.1207
Total Nginx First Time Install Time: 1699.9774
Total PHP First Time Install Time: 533.9391
Download From Github Time: 0.8592
Total Time Other eg. source compiles: 278.5422
Total Centmin Mod Install Time: 2576.5794
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 2698.8413 seconds
---------------------------------------------------------------------------
AlmaLinux 8.10 Cerulean Leopard  4.18.0-553.el8_10.x86_64
3 AMD EPYC Processor
3 2445.406
PHP VERSION: 8.1.28
     
  18. Jun 24, 2024 #18
    eva2000

    eva2000 Administrator Staff Member

    54,113
    12,179
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +18,739
    Local Time:
    11:03 PM
    Nginx 1.27.x
    MariaDB 10.x/11.4+
    Playing with KVM VPSes via libvirt on AMD Ryzen 5950X 16C/32T, 32GB, 500GB SSD dedicated.

    Current KVM VPSes on server.

    Code (Text):
    virsh list --all
 Id   Name              State
----------------------------------
 12   centos7_dev1      running
 13   centos7_dev2      running
 14   centos7_dev3      running
 -    almalinux8_dev1   shut off
 -    almalinux8_vm1    shut off
 -    almalinux8_vm2    shut off
 -    almalinux8_vm3    shut off
 -    almalinux9_dev1   shut off
 -    almalinux9_vm1    shut off
 -    almalinux9_vm2    shut off
 -    almalinux9_vm3    shut off


    This for centos7_dev1 8 CPU, 4GB, 50GB Disk

    Code (Text):
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 114.4964 seconds
Total YUM Time: 13.814284496 seconds
Total YUM or DNF + Source Download Time: 35.3870
Total Nginx First Time Install Time: 89.3517
Total PHP First Time Install Time: 134.5457
Download From Github Time: 2.0259
Total Time Other eg. source compiles: 213.2818
Total Centmin Mod Install Time: 472.5661
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 589.0884 seconds
---------------------------------------------------------------------------
CentOS Linux 7 3.10.0-1160.80.1.el7.x86_64
8 AMD EPYC-Milan Processor
8 3393.624
PHP VERSION: 7.4.33 
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b657
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------
     
  19. Jun 24, 2024 #19
    brijendrasial

    brijendrasial Active Member

    207
    154
    43
    Mar 21, 2018
    Ratings:
    +236
    Local Time:
    6:33 PM
    1.13.9
    10.0.22-MariaDB
    Got a very powerful machine for a client.

    Code:
    ---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 70.1392 seconds
Total YUM Time: 31.405975745 seconds
Total YUM or DNF + Source Download Time: 47.8091
Total Nginx First Time Install Time: 31.2981
Total PHP First Time Install Time: 123.8885
Download From Github Time: 1.8993
Total Time Other eg. source compiles: 204.3001
Total Centmin Mod Install Time: 407.2957
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 479.3342 seconds
---------------------------------------------------------------------------
AlmaLinux 8.10 Cerulean Leopard  4.18.0-553.5.1.el8_10.x86_64
192 AMD EPYC 9654 96-Core Processor
191 2400.000 1 3699.911
PHP VERSION: 7.4.33
---------------------------------------------------------------------------
     
  20. Aug 25, 2024 #20
    modder

    modder Member

    117
    16
    18
    Dec 6, 2019
    Ratings:
    +27
    Local Time:
    9:03 PM
    vCPU/s:1 vCPU
    RAM:2048.00 MB
    Storage:50 GB NVMe
    OS:Alma Linux 9 x64

    Code (Text):
    Total Curl Installer YUM or DNF Time: 149.4642 seconds
Total YUM Time: 120.907250775 seconds
Total YUM or DNF + Source Download Time: 189.3348
Total Nginx First Time Install Time: 242.1760
Total PHP First Time Install Time: 1466.3288
Download From Github Time: 3.0941
Total Time Other eg. source compiles: 473.6773
Total Centmin Mod Install Time: 2371.5169
---------------------------------------------------------------------------
Total Install Time for curl yum + cm install + zip download: 2524.0752 seconds
---------------------------------------------------------------------------
AlmaLinux 9.4 Seafoam Ocelot  5.14.0-427.26.1.el9_4.x86_64
1 AMD EPYC-Rome Processor
1 1996.250
PHP VERSION: 8.3.10
---------------------------------------------------------------------------
     
Previous Thread Next Thread
Loading...
Page 1 of 2

.