Welcome to Centmin Mod Community
Become a Member

OVH Intel Xeon E3-1245v5 - OVH Singapore

Discussion in 'Dedicated server hosting' started by rdan, May 1, 2017.

  1. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Specs:
    upload_2017-5-1_2-47-11.png


    System Info:
    -----------
    Processor : Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz
    CPU Cores : 8
    Frequency : 3538.691 MHz
    Memory : 31797 MB
    Swap : MB
    Uptime : 10 min,

    OS :
    Arch : x86_64 (64 Bit)
    Kernel : 3.10.0-514.16.1.el7.x86_64


    Speedtest (IPv4 only)

    Location Provider Speed
    CDN Cachefly 7.14MB/s

    Atlanta, GA, US Coloat 4.27MB/s
    Dallas, TX, US Softlayer 1.77MB/s
    Seattle, WA, US Softlayer 6.45MB/s
    San Jose, CA, US Softlayer 7.46MB/s
    Washington, DC, US Softlayer 6.52MB/s

    Tokyo, Japan Linode 13.2MB/s
    Singapore Softlayer 107MB/s

    Rotterdam, Netherlands id3.net 4.51MB/s
    Haarlem, Netherlands Leaseweb 9.64MB/s


    Disk Speed
    ----------
    I/O (1st run) : 682 MB/s
    I/O (2nd run) : 682 MB/s
    I/O (3rd run) : 681 MB/s
    Average I/O : 681.667 MB/s

     
  2. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Code:
    ---------------------------------------------------------------------------
    Total Curl Installer YUM or DNF Time: 88.9577 seconds
    Total YUM Time: 13.909135212 seconds
    Total YUM or DNF + Source Download Time: 50.8905
    Total Nginx First Time Install Time: 34.2296
    Total PHP First Time Install Time: 180.2324
    Download Zip From Github Time: 0.0056
    Total Time Other eg. source compiles: 283.6661
    Total Centmin Mod Install Time: 549.0186
    ---------------------------------------------------------------------------
    Total Install Time (curl yum + cm install + zip download): 637.9819 seconds
    ---------------------------------------------------------------------------
    
     
  3. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    @eva2000 there's something wrong with PHP install though
    gist:9293c00770fe5adf3a94738b3bbb1eef · GitHub

     
  4. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    Very nice but that ain't a bench script, this is GitHub - centminmod/centminmodbench after you install Centmin Mod :)

    nginx failed to install properly so no nginx user/group created but error from your posted log goes up earlier into install routine with segfault during downloads could be faulty memory on server or something
    Code (Text):
    Initializing download: https://centminmod.com/centminmodparts/mysqlreport/mysqlreport
    File size: 49223 bytes
    Opening output file mysqlreport
    Starting download
    
    [  0%]  .......... .......... .......... .......... ........./centmin.sh: line 1007: 16280 Segmentation fault      $DOWNLOADAPP $1 $2 $3 $4
    [1;32;40mError: mysqlreport download failed.
    (B[mcheck Centmin Mod log for details at /root/centminlogs/
    Aborting script...
    


    try reloading fresh CentOS 7 OS and trying again
     
  5. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Still nginx didn't installed.
    gist:d0f9218facb5628db32295496511054f · GitHub

    Please try my own custom_config
    Code:
    ZONEINFO=Asia/Manila  # Set Timezone
    NGINX_IPV='n' #NGINX IPV6 compile support for unattended mode only
    ENABLEMOTD='n'
    
    CUSTOMSERVERNAME='y'
    CUSTOMSERVERSTRING='nginx'
    
    AUTO_GITUPDATE='y'
    
    CLANG='n'
    
    PHP_PGO='y'
    
    DEVTOOLSETSIX='y'
    NGINX_DEVTOOLSETGCC='y'
    GENERAL_DEVTOOLSETGCC='y'
    CRYPTO_DEVTOOLSETGCC='y'
    
    NSD_DISABLED='y'              # when set to =y, NSD disabled by default with chkconfig off
    MEMCACHED_DISABLED='y'        # when set to =y,  Memcached server disabled by default via chkconfig off
    PUREFTPD_DISABLED='y'         # when set to =y, Pure-ftpd service disabled by default with chkconfig off
    
    NGXDYNAMIC_NGXPAGESPEED='y'
    
    NGINX_UPDATEMAINTENANCE='n'
    PHP_UPDATEMAINTENANCE='n'
    MARIADB_UPDATEMAINTENANCE='n'
    
    NSD_INSTALL='n'              # Install NSD (DNS Server)
    NGXMODULE_ALTORDER='n'       # nginx configure module ordering alternative order
    NGINX_DEBUG='n'              # Enable & reinstall Nginx debug log nginx.org/en/docs/debugging_log.html & wiki.nginx.org/Debugging
    NGINX_HTTP2='y'              # Nginx http/2 patch https://community.centminmod.com/threads/4127/
    NGINX_MODSECURITY=n          # modsecurity module support https://github.com/SpiderLabs/ModSecurity/wiki/Reference-Manual#Installation_for_NGINX
    NGINX_REALIP='n'
    NGINX_RDNS='n'               # https://github.com/flant/nginx-http-rdns
    NGINX_NJS='n'                # nginScript https://www.nginx.com/blog/launching-nginscript-and-looking-ahead/
    NGINX_GEOIP='n'              # Nginx GEOIP module install
    NGINX_STUBSTATUS='n'         # http://nginx.org/en/docs/http/ngx_http_stub_status_module.html required for nginx statistics
    NGINX_SUB='n'                # http://nginx.org/en/docs/http/ngx_http_sub_module.html
    NGINX_ADDITION='n'           # http://nginx.org/en/docs/http/ngx_http_addition_module.html
    NGINX_IMAGEFILTER='n'        # http://nginx.org/en/docs/http/ngx_http_image_filter_module.html
    NGINX_PERL='n'               # http://nginx.org/en/docs/http/ngx_http_perl_module.html
    NGINX_XSLT='n'               # http://nginx.org/en/docs/http/ngx_http_xslt_module.html
    NGINX_CACHEPURGE='n'         # https://github.com/FRiCKLE/ngx_cache_purge/
    NGINX_ACCESSKEY='n'          #
    NGINX_HTTPCONCAT='n'         # https://github.com/alibaba/nginx-http-concat
    NGINX_THREADS='n'            # https://www.nginx.com/blog/thread-pools-boost-performance-9x/
    NGINX_STREAM='n'             # http://nginx.org/en/docs/stream/ngx_stream_core_module.html
    NGINX_STREAMGEOIP='n'        # nginx 1.11.3+ option http://hg.nginx.org/nginx/rev/558db057adaa
    NGINX_STREAMREALIP='n'       # nginx 1.11.4+ option http://hg.nginx.org/nginx/rev/9cac11efb205
    NGINX_STREAMSSLPREREAD='n'   # nginx 1.11.5+ option https://nginx.org/en/docs/stream/ngx_stream_ssl_preread_module.html
    NGINX_RTMP='n'               # Nginx RTMP Module support https://github.com/arut/nginx-rtmp-module
    NGINX_FLV='n'                # http://nginx.org/en/docs/http/ngx_http_flv_module.html
    NGINX_MP4='n'                # Nginx MP4 Module http://nginx.org/en/docs/http/ngx_http_mp4_module.html
    NGINX_AUTHREQ='n'            # http://nginx.org/en/docs/http/ngx_http_auth_request_module.html
    NGINX_SECURELINK='n'         # http://nginx.org/en/docs/http/ngx_http_secure_link_module.html
    NGINX_FANCYINDEX='n'         # http://wiki.nginx.org/NgxFancyIndex
    NGINX_VHOSTSTATS='n'         # https://github.com/vozlt/nginx-module-vts
    NGINX_LIBBROTLI='y'          # https://github.com/google/ngx_brotli
    NGINX_LIBBROTLISTATIC='n'
    NGINX_PAGESPEED='y'          # Install ngx_pagespeed
    NGINX_PAGESPEEDGITMASTER='n' # Install ngx_pagespeed from official github master instead 
    NGINX_PASSENGER='n'          # Install Phusion Passenger requires installing addons/passenger.sh before hand
    NGINX_WEBDAV='n'             # Nginx WebDAV and nginx-dav-ext-module
    NGINX_HTTPREDIS='n'          # Nginx redis http://wiki.nginx.org/HttpRedisModule
    ORESTY_HEADERSMORE='n'       # openresty headers more https://github.com/openresty/headers-more-nginx-module
    ###ORESTY_HEADERSMOREGIT='n'    # use git master instead of version specific
    NGINX_STICKY='n'             # nginx sticky module https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng
    NGINX_UPSTREAMCHECK='n'      # nginx upstream check https://github.com/yaoweibin/nginx_upstream_check_module
    NGINX_OPENRESTY='n'          # Agentzh's openresty Nginx modules
    ORESTY_SETMISCGIT='n'        # use git master instead of version specific
    ORESTY_ECHOGIT='n'           # use git master instead of version specific
    
    LUAJIT_GITINSTALL='n'        # opt to install luajit 2.1 from dev branch http://repo.or.cz/w/luajit-2.0.git/shortlog/refs/heads/v2.1
    
    ORESTY_LUANGINX='n'             # enable or disable or ORESTY_LUA* nginx modules below
    NGX_LUAUPSTREAM='n'                # disable https://github.com/openresty/lua-upstream-nginx-module
    NGX_LUAUPSTREAMCACHE='n'           # disable https://github.com/cloudflare/lua-upstream-cache-nginx-module
    
    PHPGEOIP_ALWAYS='n'          # GeoIP php extension is always reinstalled on php recompiles
    PHPDEBUGMODE='n'             # --enable-debug PHP compile flag
    PHPFINFO='n'                 # Disable or Enable PHP File Info extension
    PHPPCNTL='n'                 # Disable or Enable PHP Process Control extension
    PHPINTL='n'                  # Disable or Enable PHP intl extension
    PHPRECODE=n                  # Disable or Enable PHP Recode extension
    PHPSNMP='n'                  # Disable or Enable PHP SNMP extension
    PHPIMAGICK='y'               # Disable or Enable PHP ImagicK extension
    PHPMAILPARSE='n'             # Disable or Enable PHP mailparse extension
    PHPIONCUBE='n'               # Disable or Enable Ioncube Loader via addons/ioncube.sh
    POSTGRESQL='n'               # set to =y to install PostgreSQL 9.4 server, devel packages and pdo-pgsql PHP extension
    
    NGINX_VHOSTSSL='n'           # enable centmin.sh menu 2 prompt to create self signed SSL vhost 2nd vhost conf
    NGINXBACKUP='n'
    
    ## Nginx SSL options
    ###OPENSSL_VERSION='1.1.0e'
    CLOUDFLARE_PATCHSSL='y'    # set 'y' to implement Cloudflare's chacha20 patch https://github.com/cloudflare/sslconfig
    NGINX_DYNAMICTLS='y'       # set 'y' and recompile nginx https://blog.cloudflare.com/optimizing-tls-over-tcp-to-reduce-latency/
    
    # LibreSSL
    LIBRESSL_SWITCH='n'        # if set to 'y' it overrides OpenSSL as the default static compiled option for Nginx server
    
    MEMCACHED_INSTALL='n'         # Install Memcached
    PHPREDIS='y'                # redis PHP extension install
    PHPMONGODB='n'              # MongoDB PHP extension install
    PHP_FTPEXT='n'              # ftp PHP extension
    PHP_MEMCACHE='n'            # memcache PHP extension
    PHP_MEMCACHED='n'           # memcached PHP extension
    PHP_VERSION='7.1.4'        # Use this version of PHP
    ZOPCACHEDFT='y'
    PHP_EXTRAOPTS=""
    
     
  6. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    Code (Text):
    g++ (GCC) 6.2.1 20160916 (Red Hat 6.2.1-3)
    Copyright (C) 2016 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    inc/openssl_install.inc: line 136: /opt/rh/devtoolset-4/enable: No such file or directory
    -rw-r--r--. 1 root root 11K May  1 04:16 /root/centminlogs/centminmod_ngxinstalltime_010517-041354.log

    Try with
    Code (Text):
    DEVTOOLSETSIX='n'
    
     
  7. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    added possible fix to 123.09beta01 related to when you manually set DEVTOOLSETSIX='y' and CRYPTO_DEVTOOLSETGCC='y' at same time
     
  8. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    They should not be both enabled?
     
  9. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Not too bad.
     
  10. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    it's a bug that i fixed now so should work with both :)

    that's considerably fast time if you take into account all the additional Intel cpu optimised settings you enabled for devtoolset etc
     
  11. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
  12. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    diffchecker nice tool !

    Definitely faster ! US East coast ain't good for Asia and Australia latencies ! Hence, why I like US West Coast - middle of Asian and Europe :D
     
  13. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    hmmm Anyone using OVH Singapore?
     
  14. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
  15. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Different bandwidth than Canada and France Server.
    upload_2017-5-3_0-17-3.png
     
  16. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    yeah limited at 250Gbps ! I thought it was 500Mbps ?
     
  17. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Yay Bandwidth is even lower now.
    upload_2017-5-5_23-55-38.png
     
  18. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    WTF, they reducing it even further or was it meant to be that low ?
     
  19. rdan

    rdan Premium Member Premium Member

    5,326
    1,337
    113
    May 25, 2014
    Ratings:
    +2,065
    Local Time:
    3:29 AM
    Mainline
    10.2
    Not sure, But I already cancel my Server.
     
  20. eva2000

    eva2000 Administrator Staff Member

    49,221
    11,291
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +17,566
    Local Time:
    5:29 AM
    Nginx 1.21.x
    MariaDB 10.x
    :( shame though - guess Singapore like Australia just has too expensive bandwidth pricing :(