Feedback Initial Alma install + MariaDB U/G + FFMPEG Install

Hetzner Standard CPX11 2 AMD VCPU 2 GB RAM 40 GB HDD - Nuremberg

Code:

---------------------------------------------------------------------------
Total Curl Installer YUM or DNF Time: 137.8818 seconds
Total YUM Time: 33.621645377 seconds
Total YUM or DNF + Source Download Time: 52.5750
Total Nginx First Time Install Time: 337.8713
Total PHP First Time Install Time: 720.0006
Download From Github Time: 4.2781
Total Time Other eg. source compiles: 271.3142
Total Centmin Mod Install Time: 1381.7611
---------------------------------------------------------------------------
Total Install Time (curl yum + cm install + zip download): 1523.9210 seconds
---------------------------------------------------------------------------
AlmaLinux 8.6 Sky Tiger  (4.18.0-372.26.1.el8_6.x86_64)
2 AMD EPYC Processor
2 2495.290
PHP VERSION: 8.1.10
---------------------------------------------------------------------------
Centmin Mod Version: 130.00beta01.b215
Install Summary Logs: /root/centminlogs/installer_summary_links.log
---------------------------------------------------------------------------

CMM Config

Code:

CENTOS_ALPHATEST='y'
NGINX_VERSION='1.23.1'
NGINX_ONETWOTHREE_COMPAT='y'
DEVTOOLSETTEN='n'
DEVTOOLSETELEVEN='y'
SELFSIGNEDSSL_ECDSA='y'
PHPFINFO='y'

ENABLE_MARIADBTENFOURUPGRADE='y'
ENABLE_MARIADBTENFIVEUPGRADE='y'
ENABLE_MARIADBTENSIXUPGRADE='y'

MARCH_TARGETNATIVE='n'

Code:

1st:
130.00beta01.b215 #Tue Sep 27 19:20:15 UTC 2022
..
last 10:
130.00beta01.b215 #Tue Sep 27 19:20:15 UTC 2022
130.00beta01.b215 #Tue Sep 27 19:45:43 UTC 2022
130.00beta01.b215 #Tue Sep 27 19:56:01 UTC 2022

3. Provide CPU, memory and disk info via these 3 commands below:

Code:

Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              2
On-line CPU(s) list: 0,1
Thread(s) per core:  1
Core(s) per socket:  2
Socket(s):           1
NUMA node(s):        1
Vendor ID:           AuthenticAMD
BIOS Vendor ID:      QEMU
CPU family:          23
Model:               49
Model name:          AMD EPYC Processor
BIOS Model name:     Not Specified
Stepping:            0
CPU MHz:             2495.290
BogoMIPS:            4990.58
Hypervisor vendor:   KVM
Virtualization type: full
L1d cache:           32K
L1i cache:           32K
L2 cache:            512K
L3 cache:            16384K
NUMA node0 CPU(s):   0,1
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm rep_good nopl cpuid extd_apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext perfctr_core ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzero xsaveerptr wbnoinvd arat umip rdpid arch_capabilities

Code:

            total        used        free      shared  buff/cache   available
Mem:           1764         306         350          11        1108        1221
Low:           1764        1414         350
High:             0           0           0
Swap:          1023          72         951
Total:         2788         378        1301

Code:

Filesystem     Type      Size  Used Avail Use% Mounted on
devtmpfs       devtmpfs  865M     0  865M   0% /dev
tmpfs          tmpfs     883M     0  883M   0% /dev/shm
tmpfs          tmpfs     883M  8.6M  874M   1% /run
tmpfs          tmpfs     883M     0  883M   0% /sys/fs/cgroup
/dev/sda1      ext4       38G  7.0G   29G  20% /
/dev/sda14     vfat       64M  5.8M   59M  10% /boot/efi
tmpfs          tmpfs     177M     0  177M   0% /run/user/0
/dev/loop0     ext4      3.9G   17M  3.7G   1% /tmp

Installed CMM with php8.1

---

Upgraded MAriaDB 10.3 >> 10.4 >> 10.5 >>10.6 (10.6 was a lot slower than the other two upgrades)

Installed FFMPEG Option 19 >> 1

All run very well no problems

 

Just added a few extras

CMM Config

Code:

CENTOS_ALPHATEST='y'
NGINX_VERSION='1.23.1'
NGINX_ONETWOTHREE_COMPAT='y'
DEVTOOLSETTEN='n'
DEVTOOLSETELEVEN='y'
SELFSIGNEDSSL_ECDSA='y'
PHPFINFO='y'

OPENSSL_VERSION='3.0.5'
TCP_BBR_ENABLE='y'

ENABLE_MARIADBTENFOURUPGRADE='y'
ENABLE_MARIADBTENFIVEUPGRADE='y'
ENABLE_MARIADBTENSIXUPGRADE='y'

MARCH_TARGETNATIVE='n'

Recompiled Nginx

All running fine

Output of Nginx -V

Code:

nginx version: nginx/1.23.1 (270922-202824-almalinux8-kvm-10daf8f)
built by gcc 11.2.1 20220127 (Red Hat 11.2.1-9) (GCC)
built with OpenSSL 3.0.5 5 Jul 2022
TLS SNI support enabled