Code: # MegaCli -LDInfo -Lall -aALL Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (Target Id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1.454 TB State: Degraded Stripe Size: 256 KB Number Of Drives per span:2 Span Depth:2 Default Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Enabled Encryption Type: None Exit Code: 0x00 How to fix this thing? :|
Code: # MegaCli -AdpAllInfo -aALL Adapter #0 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9271-4i Serial No : SV55346382 FW Package Build: 23.33.0-0023 Mfg. Data ================ Mfg. Date : 12/29/15 Rework Date : 00/00/00 Revision No : 001 Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.49.03.1_4.16.08.00_0x060B0201 WebBIOS Version : 6.1-73-e_73-00-Rel Preboot CLI Version: 05.07-00:#%00011 FW Version : 3.450.75-4319 Boot Block Version : 2.05.00.00-0010 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9276 Host Interface : PCIE Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 4433221100000000 1 4433221101000000 2 4433221102000000 3 4433221103000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b00b6d5e90 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent Settings ================ Current Time : 4:33:50 12/6, 2017 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% Resynch Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Any Offline VD Cache Preserved : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Mix of SAS/SATA of SSD type in VD Allowed Mix of SSD/HDD in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Min Stripe Size : 8 KB Max Stripe Size : 1.0 MB Device Present ================ Virtual Drives : 1 Degraded : 1 Offline : 0 Physical Devices : 5 Disks : 4 Critical Disks : 0 Failed Disks : 1 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Disable Copyback : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No Enable Spin Down of UnConfigured Drives : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Stripe Size : 256kB Flush Time : 4 seconds Write Policy : WB Read Policy : RA Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : Yes Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : Yes Allow HDD/SSD Mix in VD : Yes Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 Exit Code: 0x00
Code: # MegaCli -LDPDInfo -aAll Adapter #0 Number of Virtual Disks: 1 Virtual Disk: 0 (Target Id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1.454 TB State: Degraded Stripe Size: 256 KB Number Of Drives per span:2 Span Depth:2 Default Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Enabled Encryption Type: None Number of Spans: 2 Span: 0 - Number of PDs: 2 PD: 0 Information Enclosure Device ID: 252 Slot Number: 0 Device Id: 5 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221103000000 Connected Port Number: 3(path0) Inquiry Data: BTWH50960052800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device PD: 1 Information Enclosure Device ID: 252 Slot Number: 1 Device Id: 6 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221102000000 Connected Port Number: 2(path0) Inquiry Data: BTWH509504BQ800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Span: 1 - Number of PDs: 2 PD: 0 Information Enclosure Device ID: 252 Slot Number: 2 Device Id: 7 Sequence Number: 3 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Failed SAS Address(0): 0x4433221101000000 Connected Port Number: 1(path0) Inquiry Data: BTWH509602PM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device PD: 1 Information Enclosure Device ID: 252 Slot Number: 3 Device Id: 4 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221100000000 Connected Port Number: 0(path0) Inquiry Data: BTWH509601KM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Exit Code: 0x00
Code: # MegaCli -LDPDInfo -aAll Adapter #0 Number of Virtual Disks: 1 Virtual Disk: 0 (Target Id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:1.454 TB State: Degraded Stripe Size: 256 KB Number Of Drives per span:2 Span Depth:2 Default Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAhead, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Enabled Encryption Type: None Number of Spans: 2 Span: 0 - Number of PDs: 2 PD: 0 Information Enclosure Device ID: 252 Slot Number: 0 Device Id: 5 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221103000000 Connected Port Number: 3(path0) Inquiry Data: BTWH50960052800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device PD: 1 Information Enclosure Device ID: 252 Slot Number: 1 Device Id: 6 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221102000000 Connected Port Number: 2(path0) Inquiry Data: BTWH509504BQ800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Span: 1 - Number of PDs: 2 PD: 0 Information Enclosure Device ID: 252 Slot Number: 2 Device Id: 7 Sequence Number: 3 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Failed SAS Address(0): 0x4433221101000000 Connected Port Number: 1(path0) Inquiry Data: BTWH509602PM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device PD: 1 Information Enclosure Device ID: 252 Slot Number: 3 Device Id: 4 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221100000000 Connected Port Number: 0(path0) Inquiry Data: BTWH509601KM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Exit Code: 0x00
Code: # MegaCli -PDList -aALL Adapter #0 Enclosure Device ID: 252 Slot Number: 0 Device Id: 5 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221103000000 Connected Port Number: 3(path0) Inquiry Data: BTWH50960052800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Enclosure Device ID: 252 Slot Number: 1 Device Id: 6 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221102000000 Connected Port Number: 2(path0) Inquiry Data: BTWH509504BQ800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Enclosure Device ID: 252 Slot Number: 2 Device Id: 7 Sequence Number: 3 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Failed SAS Address(0): 0x4433221101000000 Connected Port Number: 1(path0) Inquiry Data: BTWH509602PM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Enclosure Device ID: 252 Slot Number: 3 Device Id: 4 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Non Coerced Size: 744.711 GB [0x5d16ceb0 Sectors] Coerced Size: 744.687 GB [0x5d160000 Sectors] Firmware state: Online SAS Address(0): 0x4433221100000000 Connected Port Number: 0(path0) Inquiry Data: BTWH509601KM800CGN INTEL SSDSC2BB800H4 D2010380 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Foreign State: None Device Speed: Unknown Link Speed: Unknown Media Type: Solid State Device Exit Code: 0x00
Code: # MegaCli -PDList -aAll | egrep 'Slot\ Number|Device\ Id|Inquiry\ Data|Raw|Firmware\ state' | sed 's/Slot/\nSlot/g' Slot Number: 0 Device Id: 5 Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Firmware state: Online Inquiry Data: BTWH50960052800CGN INTEL SSDSC2BB800H4 D2010380 Slot Number: 1 Device Id: 6 Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Firmware state: Online Inquiry Data: BTWH509504BQ800CGN INTEL SSDSC2BB800H4 D2010380 Slot Number: 2 Device Id: 7 Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Firmware state: Failed Inquiry Data: BTWH509602PM800CGN INTEL SSDSC2BB800H4 D2010380 Slot Number: 3 Device Id: 4 Raw Size: 745.211 GB [0x5d26ceb0 Sectors] Firmware state: Online Inquiry Data: BTWH509601KM800CGN INTEL SSDSC2BB800H4 D2010380
They said Disk was fine, only raid config has misconfig. And raid config is up to the customer to solve .
To me it looks like a failed disk (slot 2). You may try to remove this disk from the config and add it in again after that. The RAID should rebuild itself. If it still fails, the disk should be replaced.
First test your harddrive hardware and possibly other hardware as desired on issues, failures etc (Hardware stress test). For example: If your drive is broken and you have a report for this, you can act accordingly to OVH. Only then focus on RAID. You can do what you want without good hardware. It does not matter.
I never expected they were going to answer this. So basically if your hardware gets bad the best is to sign up for a new server? Unbelievable
The problem comes up when OVH says raid config is wrong like happened to Roldan. What will you do in that case?
5 days before it ends the monthly payment you get a new server and transfer there All problems solved !
If you paid a $300+ server it doesn't sound good and even if you set up everything you don't know if the performance will be affected a lot
You can get a new server with exact specs and price. Don't think that all servers will have that raid issue...