Letsencrypt SSL Where is Nginx vhost stored?

elargento · Apr 3, 2017

Hi everybody,

I already run 2 and then 22 in order to create a Wordpress site. However I noticed I can't use Letsencrypt since acmetool.sh already creates a Nginx vhost. I think the next step would be to delete the Nginx vhost in order to run acmetool.sh so where is it being stored?

Thank you

eva2000 · Apr 3, 2017

Config layout Centmin Mod Configuration Files - CentminMod.com LEMP Nginx web stack for CentOS

and read Nginx Vhost & NSD DNS Setup - CentminMod.com LEMP Nginx web stack for CentOS

what are you trying to ? use acmetool.sh for existing vhost ? if so see 1st post linked guide at https://centminmod.com/acmetool for migrating to HTTPS with existing nginx vhost

Added an official Centmin Mod guide for fresh Centmin Mod Nginx HTTP/2 based HTTPS vhost site creation with free Letsencrypt SSL certificates Using Centmin Mod acmetool.sh addon for Nginx HTTP/2 based HTTPS with free Letsencrypt SSL certificates.

This is an alternative to the guide for existing Centmin Mod Nginx HTTP users wishing to migrate from HTTP to HTTPS at Migrating Existing Nginx Vhost From HTTP to HTTP/2 based HTTPS With Letsencrypt SSL Certificates

Click to expand...

elargento · Apr 3, 2017

eva2000 said: ↑

what are you trying to ? use acmetool.sh for existing vhost ? if so see 1st post linked guide at https://centminmod.com/acmetool for migrating to HTTPS with existing nginx vhost
Click to expand...

No idea what I'm doing wrong. I just want to enable https using letsencrypt. My site loads fine but on http, if I try to enter to https I get the following error:
NET::ERR_CERT_AUTHORITY_INVALID

I've done the steps in Migrating Existing Nginx Vhost From HTTP to HTTP/2 based HTTPS With Letsencrypt SSL Certificates but still not working.

eva2000 · Apr 3, 2017

contents of your /usr/local/nginx/conf/conf.d/yourdomain.com.ssl.conf nginx vhost ?

for posting code you might want to use CODE tags for code How to use forum BBCODE code tags

elargento · Apr 3, 2017

Here you have:

Code:

# Centmin Mod Getting Started Guide
# must read http://centminmod.com/getstarted.html
# For SPDY SSL Setup
# read http://centminmod.com/nginx_configure_https_ssl_spdy.html

# redirect from www to non-www  forced SSL
# uncomment, save file and restart Nginx to enable
# if unsure use return 302 before using return 301
# server {
#   server_name domain.com www.domain.com;
#    return 302 https://$server_name$request_uri;
# }

server {
  listen 443 ssl http2;
  server_name domain.com www.domain.com;

  ssl_dhparam /usr/local/nginx/conf/ssl/domain.com/dhparam.pem;
  ssl_certificate      /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.cer;
  ssl_certificate_key  /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.key;
  include /usr/local/nginx/conf/ssl_include.conf;

  http2_max_field_size 16k;
  http2_max_header_size 32k;
  # mozilla recommended
  ssl_ciphers EECDH+CHACHA20:EECDH+CHACHA20-draft:EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+ECDSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+SHA384:EECDH+AES128:!aNULL:!eNULL:!LOW:!3D$
  ssl_prefer_server_ciphers   on;
  #add_header Alternate-Protocol  443:npn-spdy/3;

  # before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
  #add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
  #add_header X-Frame-Options SAMEORIGIN;
  #add_header X-Xss-Protection "1; mode=block" always;
  #add_header X-Content-Type-Options "nosniff" always;
  #spdy_headers_comp 5;
  ssl_buffer_size 1369;
  ssl_session_tickets on;

  # enable ocsp stapling
  #resolver 8.8.8.8 8.8.4.4 valid=10m;
  #resolver_timeout 10s;
  #ssl_stapling on;
  #ssl_stapling_verify on;
 ssl_trusted_certificate /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.cer;

# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
# mozilla recommended
  ssl_ciphers EECDH+CHACHA20:EECDH+CHACHA20-draft:EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+ECDSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+SHA384:EECDH+AES128:!aNULL:!eNULL:!LOW:!3D$
  ssl_prefer_server_ciphers   on;
  #add_header Alternate-Protocol  443:npn-spdy/3;

  # before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
  #add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
  #add_header X-Frame-Options SAMEORIGIN;
  #add_header X-Xss-Protection "1; mode=block" always;
  #add_header X-Content-Type-Options "nosniff" always;
  #spdy_headers_comp 5;
  ssl_buffer_size 1369;
  ssl_session_tickets on;

  # enable ocsp stapling
  #resolver 8.8.8.8 8.8.4.4 valid=10m;
  #resolver_timeout 10s;
  #ssl_stapling on;
  #ssl_stapling_verify on;
 ssl_trusted_certificate /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.cer;

# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;

  #add_header X-Frame-Options SAMEORIGIN;
  #add_header X-Xss-Protection "1; mode=block" always;
  #add_header X-Content-Type-Options "nosniff" always;

  # limit_conn limit_per_ip 16;
  # ssi  on;

  access_log /home/nginx/domains/domain.com/log/access.log main_ext buffer=256k flush=60m;
  error_log /home/nginx/domains/domain.com/log/error.log;

  include /usr/local/nginx/conf/autoprotect/domain.com/autoprotect-domain.com.conf;
  root /home/nginx/domains/domain.com/public;
  # uncomment cloudflare.conf include if using cloudflare for
  # server and/or vhost site
  #include /usr/local/nginx/conf/cloudflare.conf;
  include /usr/local/nginx/conf/503include-main.conf;

  include /usr/local/nginx/conf/wpincludes/domain.com/wpcacheenabler_domain.com.conf;
  #include /usr/local/nginx/conf/wpincludes/domain.com/wpsupercache_domain.com.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/wpincludes/domain.com/rediscache_domain.com.conf;

#include /usr/local/nginx/conf/pagespeedstatslog.conf;

  #add_header X-Frame-Options SAMEORIGIN;
  #add_header X-Xss-Protection "1; mode=block" always;
  #add_header X-Content-Type-Options "nosniff" always;

  # limit_conn limit_per_ip 16;
  # ssi  on;

  access_log /home/nginx/domains/domain.com/log/access.log main_ext buffer=256k flush=60m;
  error_log /home/nginx/domains/domain.com/log/error.log;

  include /usr/local/nginx/conf/autoprotect/domain.com/autoprotect-domain.com.conf;
  root /home/nginx/domains/domain.com/public;
  # uncomment cloudflare.conf include if using cloudflare for
  # server and/or vhost site
  #include /usr/local/nginx/conf/cloudflare.conf;
  include /usr/local/nginx/conf/503include-main.conf;

  include /usr/local/nginx/conf/wpincludes/domain.com/wpcacheenabler_domain.com.conf;
  #include /usr/local/nginx/conf/wpincludes/domain.com/wpsupercache_domain.com.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/wpincludes/domain.com/rediscache_domain.com.conf;

  location / {
  include /usr/local/nginx/conf/503include-only.conf;


  # Enables directory listings when index file not found
  #autoindex  on;

  # for wordpress super cache plugin
  #try_files /wp-content/cache/supercache/$http_host/$cache_uri/index.html $uri $uri/ /index.php?q=$uri&$args;

  # for wp cache enabler plugin
  try_files $cache_enabler_uri $uri $uri/ $custom_subdir/index.php?$args;

  # Wordpress Permalinks
  #try_files $uri $uri/ /index.php?q=$uri&$args;

  # Nginx level redis Wordpress
  # https://community.centminmod.com/posts/18828/
  #try_files $uri $uri/ /index.php?$args;

  }

location ~* /(wp-login\.php) {
  location / {
  include /usr/local/nginx/conf/503include-only.conf;


  # Enables directory listings when index file not found
  #autoindex  on;

  # for wordpress super cache plugin
  #try_files /wp-content/cache/supercache/$http_host/$cache_uri/index.html $uri $uri/ /index.php?q=$uri&$args;

  # for wp cache enabler plugin
  try_files $cache_enabler_uri $uri $uri/ $custom_subdir/index.php?$args;

  # Wordpress Permalinks
  #try_files $uri $uri/ /index.php?q=$uri&$args;

  # Nginx level redis Wordpress
  # https://community.centminmod.com/posts/18828/
  #try_files $uri $uri/ /index.php?$args;

  }

location ~* /(wp-login\.php) {
    limit_req zone=xwplogin burst=1 nodelay;
    #limit_conn xwpconlimit 30;
    auth_basic "Private";
    auth_basic_user_file /home/nginx/domains/domain.com/htpasswd_wplogin;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /(xmlrpc\.php) {
    limit_req zone=xwprpc burst=45 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

  include /usr/local/nginx/conf/wpincludes/domain.com/wpsecure_domain.com.conf;
  include /usr/local/nginx/conf/php-wpsc.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/php-rediscache.conf;
  include /usr/local/nginx/conf/staticfiles.conf;
  include /usr/local/nginx/conf/drop.conf;
  #include /usr/local/nginx/conf/errorpage.conf;
    #limit_conn xwpconlimit 30;
    auth_basic "Private";
    auth_basic_user_file /home/nginx/domains/domain.com/htpasswd_wplogin;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /(xmlrpc\.php) {
    limit_req zone=xwprpc burst=45 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

  include /usr/local/nginx/conf/wpincludes/domain.com/wpsecure_domain.com.conf;
  include /usr/local/nginx/conf/php-wpsc.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/php-rediscache.conf;
  include /usr/local/nginx/conf/staticfiles.conf;
  include /usr/local/nginx/conf/drop.conf;
  #include /usr/local/nginx/conf/errorpage.conf;
  include /usr/local/nginx/conf/vts_server.conf;

Thanks for your help

eva2000 · Apr 3, 2017

you totally messed up a duplicated sections of your domain.com.ssl.conf vhost file

use vhost generator at Generate Centmin Mod Nginx Vhost - CentminMod.com LEMP Nginx web stack for CentOS select https with wordpress basic config to get an idea of the placement

something like

Code (Text):

# Centmin Mod Getting Started Guide
# must read http://centminmod.com/getstarted.html
# For SPDY SSL Setup
# read http://centminmod.com/nginx_configure_https_ssl_spdy.html

# redirect from www to non-www  forced SSL
# uncomment, save file and restart Nginx to enable
# if unsure use return 302 before using return 301
# server {
#   server_name domain.com www.domain.com;
#    return 302 https://$server_name$request_uri;
# }

server {
  listen 443 ssl http2;
  server_name domain.com www.domain.com;

  ssl_dhparam /usr/local/nginx/conf/ssl/domain.com/dhparam.pem;
  ssl_certificate      /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.cer;
  ssl_certificate_key  /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.key;
  include /usr/local/nginx/conf/ssl_include.conf;

  http2_max_field_size 16k;
  http2_max_header_size 32k;
  # mozilla recommended
  ssl_ciphers EECDH+CHACHA20:EECDH+CHACHA20-draft:EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+ECDSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+SHA384:EECDH+AES128:!aNULL:!eNULL:!LOW:!3D$
  ssl_prefer_server_ciphers   on;
  #add_header Alternate-Protocol  443:npn-spdy/3;

  # before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
  #add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
  #add_header X-Frame-Options SAMEORIGIN;
  #add_header X-Xss-Protection "1; mode=block" always;
  #add_header X-Content-Type-Options "nosniff" always;
  #spdy_headers_comp 5;
  ssl_buffer_size 1369;
  ssl_session_tickets on;

  # enable ocsp stapling
  #resolver 8.8.8.8 8.8.4.4 valid=10m;
  #resolver_timeout 10s;
  #ssl_stapling on;
  #ssl_stapling_verify on;
 ssl_trusted_certificate /usr/local/nginx/conf/ssl/domain.com/domain.com-acme.cer;

# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;

  # limit_conn limit_per_ip 16;
  # ssi  on;

  access_log /home/nginx/domains/domain.com/log/access.log main_ext buffer=256k flush=60m;
  error_log /home/nginx/domains/domain.com/log/error.log;

  include /usr/local/nginx/conf/autoprotect/domain.com/autoprotect-domain.com.conf;
  root /home/nginx/domains/domain.com/public;
  # uncomment cloudflare.conf include if using cloudflare for
  # server and/or vhost site
  #include /usr/local/nginx/conf/cloudflare.conf;
  include /usr/local/nginx/conf/503include-main.conf;

  include /usr/local/nginx/conf/wpincludes/domain.com/wpcacheenabler_domain.com.conf;
  #include /usr/local/nginx/conf/wpincludes/domain.com/wpsupercache_domain.com.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/wpincludes/domain.com/rediscache_domain.com.conf;

  location / {
  include /usr/local/nginx/conf/503include-only.conf;

  # Enables directory listings when index file not found
  #autoindex  on;

  # for wordpress super cache plugin
  #try_files /wp-content/cache/supercache/$http_host/$cache_uri/index.html $uri $uri/ /index.php?q=$uri&$args;

  # for wp cache enabler plugin
  try_files $cache_enabler_uri $uri $uri/ $custom_subdir/index.php?$args;

  # Wordpress Permalinks
  #try_files $uri $uri/ /index.php?q=$uri&$args;

  # Nginx level redis Wordpress
  # https://community.centminmod.com/posts/18828/
  #try_files $uri $uri/ /index.php?$args;

  }

location ~* /(wp-login\.php) {
    limit_req zone=xwplogin burst=1 nodelay;
    #limit_conn xwpconlimit 30;
    auth_basic "Private";
    auth_basic_user_file /home/nginx/domains/domain.com/htpasswd_wplogin;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

location ~* /(xmlrpc\.php) {
    limit_req zone=xwprpc burst=45 nodelay;
    #limit_conn xwpconlimit 30;
    include /usr/local/nginx/conf/php-wpsc.conf;
    # https://community.centminmod.com/posts/18828/
    #include /usr/local/nginx/conf/php-rediscache.conf;
}

  include /usr/local/nginx/conf/wpincludes/domain.com/wpsecure_domain.com.conf;
  include /usr/local/nginx/conf/php-wpsc.conf;
  # https://community.centminmod.com/posts/18828/
  #include /usr/local/nginx/conf/php-rediscache.conf;
  include /usr/local/nginx/conf/staticfiles.conf;
  include /usr/local/nginx/conf/drop.conf;
  #include /usr/local/nginx/conf/errorpage.conf;
  include /usr/local/nginx/conf/vts_server.conf;

}

compared messed up one with above one i posted to get an idea what's what

elargento · Apr 4, 2017

eva2000 said: ↑

compared messed up one with above one i posted to get an idea what's what
Click to expand...

My God..I got confused with too many steps. HTTPS is working fine now, thank you!

elargento · Apr 4, 2017

Humm now the entire site is down, no way to load it. Any suggestion?

eva2000 · Apr 4, 2017

output for
Code (Text):
nginx -t
and
Code (Text):
journalctl -u nginx --no-pager
See FAQ items 40 & 41 for details and clues to see if your own ISP ip is being blocked i.e. first check to see if your ISP ip is being blocked
Code (Text):
csf -g IPADDRESS

elargento · Apr 4, 2017

Code:

[04:49][root@hostname.domain.com conf]# nginx -t
nginx: [warn] conflicting server name "http2.domain.com" on 0.0.0.0:80, ignored
nginx: [warn] conflicting server name "www.http2.domain.com" on 0.0.0.0:80, ignored
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful

Code:

[04:55][root@hostname.domain.com conf]# journalctl -u nginx --no-pager
-- Logs begin at Sun 2017-03-26 16:04:15 UTC, end at Tue 2017-04-04 04:55:01 UTC. --
Mar 26 19:09:03 vps123912.vps.ovh.ca systemd[1]: Unit nginx.service cannot be reloaded because it is inactive.
Mar 26 19:10:59 vps123912.vps.ovh.ca systemd[1]: Unit nginx.service cannot be reloaded because it is inactive.
Mar 26 19:12:21 vps123912.vps.ovh.ca systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 19:12:21 vps123912.vps.ovh.ca nginx[26966]: Starting nginx: [  OK  ]
Mar 26 19:12:21 vps123912.vps.ovh.ca systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 26 19:51:12 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 19:51:12 hostname.domain.com nginx[29788]: Stopping nginx: [  OK  ]
Mar 26 19:51:12 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 19:51:12 hostname.domain.com nginx[29797]: Starting nginx: nginx: [emerg] open() "/usr/local/nginx/conf/autoprotect/domain/autoprotect-domain.conf" failed (2: No such file or directory) in /usr/local/nginx/conf/conf.d/domain.conf:32
Mar 26 19:51:12 hostname.domain.com nginx[29797]: [FAILED]
Mar 26 19:51:12 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Mar 26 19:51:12 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 26 19:51:12 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Mar 26 19:51:12 hostname.domain.com systemd[1]: nginx.service failed.
Mar 26 19:51:16 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 19:51:16 hostname.domain.com nginx[29838]: Starting nginx: [  OK  ]
Mar 26 19:51:16 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 26 19:51:16 hostname.domain.com nginx[29870]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Mar 26 19:51:16 hostname.domain.com nginx[29870]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Mar 26 19:51:17 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 26 19:51:17 hostname.domain.com nginx[29870]: Reloading nginx: [  OK  ]
Mar 26 23:11:05 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 23:11:05 hostname.domain.com nginx[31368]: Stopping nginx: [  OK  ]
Mar 26 23:11:05 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 26 23:11:05 hostname.domain.com nginx[31377]: Starting nginx: [  OK  ]
Mar 26 23:11:05 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 27 01:47:39 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 27 01:47:39 hostname.domain.com nginx[13899]: Starting nginx: [  OK  ]
Mar 27 01:47:39 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 27 01:55:26 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 27 01:55:26 hostname.domain.com nginx[15170]: Stopping nginx: [  OK  ]
Mar 27 01:55:26 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 27 01:55:26 hostname.domain.com nginx[15179]: Starting nginx: nginx: [emerg] open() "/usr/local/nginx/conf/autoprotect/domain.com/autoprotect-domain.com.conf" failed (2: No such file or directory) in /usr/local/nginx/conf/conf.d/domain.com.conf:32
Mar 27 01:55:26 hostname.domain.com nginx[15179]: [FAILED]
Mar 27 01:55:26 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Mar 27 01:55:26 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 27 01:55:26 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Mar 27 01:55:26 hostname.domain.com systemd[1]: nginx.service failed.
Mar 27 01:55:30 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Mar 27 01:55:31 hostname.domain.com nginx[15242]: Starting nginx: [  OK  ]
Mar 27 01:55:31 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Mar 27 01:55:31 hostname.domain.com nginx[15274]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Mar 27 01:55:31 hostname.domain.com nginx[15274]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Mar 27 01:55:31 hostname.domain.com nginx[15274]: Reloading nginx: [  OK  ]
Mar 27 01:55:31 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 02 22:10:25 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 02 22:10:25 hostname.domain.com nginx[5151]: Stopping nginx: [  OK  ]
Apr 02 22:10:25 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 02 22:10:26 hostname.domain.com nginx[5160]: Starting nginx: [  OK  ]
Apr 02 22:10:26 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 02 23:55:54 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 02 23:55:54 hostname.domain.com nginx[6602]: Stopping nginx: [  OK  ]
Apr 02 23:55:54 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 02 23:55:54 hostname.domain.com nginx[6610]: Starting nginx: nginx: [emerg] open() "/usr/local/nginx/conf/autoprotect/argentinosenaustralia.com/autoprotect-argentinosenaustralia.com.conf" failed (2: No such file or directory) in /usr/local/nginx/conf/conf.d/argentinosenaustralia.com.conf:32
Apr 02 23:55:54 hostname.domain.com nginx[6610]: [FAILED]
Apr 02 23:55:54 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Apr 02 23:55:54 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 02 23:55:54 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Apr 02 23:55:54 hostname.domain.com systemd[1]: nginx.service failed.
Apr 02 23:55:58 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 02 23:55:58 hostname.domain.com nginx[6699]: Starting nginx: [  OK  ]
Apr 02 23:55:58 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 02 23:55:59 hostname.domain.com nginx[6731]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Apr 02 23:55:59 hostname.domain.com nginx[6731]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Apr 02 23:55:59 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 02 23:55:59 hostname.domain.com nginx[6731]: Reloading nginx: [  OK  ]
Apr 03 00:04:28 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 00:04:28 hostname.domain.com nginx[7046]: Stopping nginx: [  OK  ]
Apr 03 00:04:28 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 00:04:28 hostname.domain.com nginx[7055]: Starting nginx: [  OK  ]
Apr 03 00:04:28 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 00:11:05 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 00:11:05 hostname.domain.com nginx[8527]: Stopping nginx: [  OK  ]
Apr 03 00:11:05 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 00:11:06 hostname.domain.com nginx[8536]: Starting nginx: [  OK  ]
Apr 03 00:11:06 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:14:01 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:14:01 hostname.domain.com nginx[6125]: Stopping nginx: [  OK  ]
Apr 03 01:14:01 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:14:01 hostname.domain.com nginx[6134]: Starting nginx: [  OK  ]
Apr 03 01:14:01 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:19:15 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:19:16 hostname.domain.com nginx[14516]: Starting nginx: [  OK  ]
Apr 03 01:19:16 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:08 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:08 hostname.domain.com nginx[15674]: Stopping nginx: [  OK  ]
Apr 03 01:41:08 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:08 hostname.domain.com nginx[15683]: Starting nginx: nginx: [emerg] open() "/usr/local/nginx/conf/autoprotect/http2.argentinosenaustralia.com/autoprotect-http2.argentinosenaustralia.com.conf" failed (2: No such file or directory) in /usr/local/nginx/conf/conf.d/http2.argentinosenaustralia.com.conf:32
Apr 03 01:41:08 hostname.domain.com nginx[15683]: [FAILED]
Apr 03 01:41:08 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Apr 03 01:41:08 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:08 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Apr 03 01:41:08 hostname.domain.com systemd[1]: nginx.service failed.
Apr 03 01:41:13 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:13 hostname.domain.com nginx[15865]: Starting nginx: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[15865]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[15865]: [  OK  ]
Apr 03 01:41:13 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:13 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:13 hostname.domain.com nginx[15897]: Stopping nginx: [  OK  ]
Apr 03 01:41:13 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:13 hostname.domain.com nginx[15906]: Starting nginx: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[15906]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[15906]: [  OK  ]
Apr 03 01:41:13 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:13 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:13 hostname.domain.com nginx[15997]: Stopping nginx: [  OK  ]
Apr 03 01:41:13 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 01:41:13 hostname.domain.com nginx[16006]: Starting nginx: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[16006]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:13 hostname.domain.com nginx[16006]: [  OK  ]
Apr 03 01:41:13 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:16 hostname.domain.com nginx[16229]: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:16 hostname.domain.com nginx[16229]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:16 hostname.domain.com nginx[16229]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Apr 03 01:41:16 hostname.domain.com nginx[16229]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Apr 03 01:41:16 hostname.domain.com nginx[16229]: Reloading nginx: [  OK  ]
Apr 03 01:41:16 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:16 hostname.domain.com nginx[16267]: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:16 hostname.domain.com nginx[16267]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 01:41:16 hostname.domain.com nginx[16267]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Apr 03 01:41:16 hostname.domain.com nginx[16267]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Apr 03 01:41:16 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 01:41:16 hostname.domain.com nginx[16267]: Reloading nginx: [  OK  ]
Apr 03 02:22:35 hostname.domain.com nginx[21570]: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 02:22:35 hostname.domain.com nginx[21570]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 02:22:35 hostname.domain.com nginx[21570]: nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
Apr 03 02:22:35 hostname.domain.com nginx[21570]: nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
Apr 03 02:22:35 hostname.domain.com systemd[1]: Reloaded SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 02:22:35 hostname.domain.com nginx[21570]: Reloading nginx: [  OK  ]
Apr 03 08:04:27 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 08:04:27 hostname.domain.com nginx[23873]: Stopping nginx: [  OK  ]
Apr 03 08:04:27 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 08:04:27 hostname.domain.com nginx[23882]: Starting nginx: nginx: [warn] conflicting server name "http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 08:04:27 hostname.domain.com nginx[23882]: nginx: [warn] conflicting server name "www.http2.argentinosenaustralia.com" on 0.0.0.0:80, ignored
Apr 03 08:04:27 hostname.domain.com nginx[23882]: [  OK  ]
Apr 03 08:04:27 hostname.domain.com systemd[1]: Started SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 16:04:28 hostname.domain.com systemd[1]: Stopping SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 16:04:28 hostname.domain.com nginx[27064]: Stopping nginx: [  OK  ]
Apr 03 16:04:28 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 03 16:04:28 hostname.domain.com nginx[27073]: Starting nginx: nginx: [emerg] unknown directive "~*" in /usr/local/nginx/conf/wpsecure.conf:1
Apr 03 16:04:28 hostname.domain.com nginx[27073]: [FAILED]
Apr 03 16:04:28 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Apr 03 16:04:28 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 03 16:04:28 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Apr 03 16:04:28 hostname.domain.com systemd[1]: nginx.service failed.
Apr 04 00:04:27 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Apr 04 00:04:27 hostname.domain.com nginx[32382]: Starting nginx: nginx: [emerg] unknown directive "~*" in /usr/local/nginx/conf/wpsecure.conf:1
Apr 04 00:04:27 hostname.domain.com nginx[32382]: [FAILED]
Apr 04 00:04:27 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Apr 04 00:04:27 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Apr 04 00:04:27 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Apr 04 00:04:27 hostname.domain.com systemd[1]: nginx.service failed.

eva2000 · Apr 4, 2017

Claudio said: ↑
Code (Text):
Apr 04 00:04:27 hostname.domain.com nginx[32382]: Starting nginx: nginx: [emerg] unknown directive "~*" in /usr/local/nginx/conf/wpsecure.conf:1
Apr 04 00:04:27 hostname.domain.com nginx[32382]: [FAILED]
Click to expand...
rogue syntax in /usr/local/nginx/conf/wpsecure.conf it seems .. which vhost references /usr/local/nginx/conf/wpsecure.conf ? there shouldn't be a /usr/local/nginx/conf/wpsecure.conf in 123.09beta01 created wordpress installs it would be something like /usr/local/nginx/conf/wpincludes/yourdomain.com/wpsecure_yourdomain.com.conf

find out with command
Code (Text):
grep -rn 'wpsecure.conf' /usr/local/nginx/conf
and correct the syntax in /usr/local/nginx/conf/wpsecure.conf

elargento · Apr 5, 2017

eva2000 said: ↑

created wordpress installs it would be something like /usr/local/nginx/conf/wpincludes/yourdomain.com/wpsecure_yourdomain.com.conf
Click to expand...

Do you mean I have to change this line in /usr/local/nginx/conf/conf.d/domain.com.ssl.conf?
Code:
  location / {
    # Wordpress Permalinks
    try_files $uri $uri/ /wordpress/index.php?q=$request_uri;

    include /usr/local/nginx/conf/wpsecure.conf;
    include /usr/local/nginx/conf/wpnocache.conf;
  }

elargento · Apr 5, 2017

eva2000 said: ↑

there shouldn't be a /usr/local/nginx/conf/wpsecure.conf in 123.09beta01
Click to expand...

In Generate Centmin Mod Nginx Vhost - CentminMod.com LEMP Nginx web stack for CentOS it says:

Create file named wpsecure.conf at /usr/local/nginx/conf/wpsecure.conf and add following lines.
Click to expand...

and then the instructions say domain.com.ssl.conf must have
include /usr/local/nginx/conf/wpsecure.conf;

So are the instructions wrong? I'm quite lost here and will appreciate some help

eva2000 · Apr 5, 2017

yes because vhost generator is for 123.08stable not 123.09beta01. If you used 123.09beta01's centmin.sh menu option 22 installer, it would have proper include file paths.

elargento · Apr 5, 2017

eva2000 said: ↑

yes because vhost generator is for 123.08stable not 123.09beta01. If you used 123.09beta01's centmin.sh menu option 22 installer, it would have proper include file paths.
Click to expand...

Why didn't you said it before?
Output of
Code:
grep -rn 'wpsecure.conf' /usr/local/nginx/conf
:
Code:
04:51][root@hostname.domain.com conf.d]# grep -rn 'wpsecure.conf' /usr/local/nginx/conf
/usr/local/nginx/conf/conf.d/domain.com.ssl.conf:61:    include /usr/local/nginx/conf/wpsecure.conf;
I don't understand which path I have to set instead of /usr/local/nginx/conf/wpsecure.conf.

eva2000 · Apr 5, 2017

either paths should work. It's just the syntaxt in yours is incorrect and hence the error on line 1 of /usr/local/nginx/conf/wpsecure.conf
Code (Text):
Apr 04 00:04:27 hostname.domain.com nginx[32382]: Starting nginx: nginx: [emerg] unknown directive "~*" in /usr/local/nginx/conf/wpsecure.conf:1
Apr 04 00:04:27 hostname.domain.com nginx[32382]: [FAILED]

elargento · Apr 5, 2017

eva2000 said: ↑

either paths should work. It's just the syntaxt in yours is incorrect and hence the error on line 1 of /usr/local/nginx/conf/wpsecure.conf
Click to expand...

I copied the same as in Generate Centmin Mod Nginx Vhost - CentminMod.com LEMP Nginx web stack for CentOS:
Code:
Create file named wpsecure.conf at /usr/local/nginx/conf/wpsecure.conf and add following lines.

# Deny access to any files with a .php extension in the uploads directory
# Works in sub-directory installs and also in multisite network
location ~* /(?:uploads|files)/.*\.php$ {
        deny all;
}
Line 1 is the same line as in vhost.php

eva2000 · Apr 5, 2017

output for command
Code (Text):
cat /usr/local/nginx/conf/wpsecure.conf

elargento · Apr 5, 2017

Code:

[05:16][root@hostname.domain.com conf.d]# cat /usr/local/nginx/conf/wpsecure.conf
# Deny access to any files with a .php extension in the uploads directory
# Works in sub-directory installs and also in multisite network
location ~* /(?:uploads|files)/.*\.php$ {
        deny all;
}

# Make sure files with the following extensions do not get loaded by nginx because nginx would display the source code, and these files can contain PASSWORDS!
location ~* \.(engine|inc|info|install|make|module|profile|test|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(\..*|Entries.*|Repository|Root|Tag|Template)$|\.php_
{
        return 444;
}

#nocgi
location ~* \.(pl|cgi|py|sh|lua)$ {
        return 444;
}

#disallow
    location ~* (roundcube|webdav|smtp|http\:|soap|w00tw00t) {
        return 444;
}

location ~ /(\.|wp-config\.php|readme\.html|license\.txt) { deny all; }

eva2000 · Apr 5, 2017

strange then that looks okay on line 1

can you restart nginx now ? output for
Code (Text):
nginx -t

Log in / Register

Forums

Join the community today

Letsencrypt SSL Where is Nginx vhost stored?

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

.

Log in / Register

Useful Searches

Join the community today

Letsencrypt SSL Where is Nginx vhost stored?

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

elargento Member

eva2000 Administrator Staff Member

.