Upgrade Is this normal?

• CentOS Version: CentOS 7 64bit
• Centmin Mod Version Installed: I think it was 123.09beta01 but should be latest now
• Nginx Version Installed:
• PHP Version Installed: 5.6.30
• MariaDB MySQL Version Installed: 10.1.24

So I upgraded from the latest beta (I think?) that was said to be almost similar to the stable version and just needed docs written to be called stable. Upgraded to the latest Centminmod version. Done it through the menu 23). Update Centmin Mod Code Base > Option 3).

At the end it said :

Code (Text):

to update centmin mod 123.08stable branch repo via git
        cd /usr/local/src/centminmod
        git stash
        git pull
        chmod +x centmin.sh

####################### IMPORTANT #######################
 To complete update
####################### IMPORTANT #######################
 run:

  cd /usr/local/src/centminmod

 before invoking centmin.sh again
####################### IMPORTANT #######################

shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
sh: centmin.sh: No such file or directory
You have new mail in /var/spool/mail/root

I ran all of the above commands (some were up to date so I assume only the last was needed).

---

When I logged back in via SSH, I no longer saw the centminmod stuff I'd normally see when logging in. I used the shortcode "centmin" to open the menu and centminmod was setting up. After a bit, I'm back at the menu.

I've recently started opening up the menu so I'm not sure if this is normal behavior. Is it? And is that sh: centmin.sh: No such file or directory stuff anything I should worry about?

 

Alias :

Code (Text):

alias cmdir='pushd /usr/local/src/centminmod'
alias cp='cp -i'
alias egrep='egrep --color=auto'
alias fgrep='fgrep --color=auto'
alias grep='grep --color=auto'
alias l.='ls -d .* --color=auto'
alias ll='ls -l --color=auto'
alias ls='ls --color=auto'
alias mv='mv -i'
alias postfixlog='pflogsumm -d today --verbose_msg_detail /var/log/maillog'
alias pwdh='echo -n "$HOSTNAME"; echo " $PWD"'
alias rm='rm -i'
alias top2='glances'
alias wget='/usr/local/bin/wget'
alias which='alias | /usr/bin/which --tty-only --read-alias --show-dot --show-tilde'
You have new mail in /var/spool/mail/root

ls -lah /usr/local/src/ :

Code (Text):

total 12K
drwxr-xr-x.  3 root root 4.0K Jul  5 07:34 .
drwxr-xr-x. 18 root root 4.0K Jul  5 08:02 ..
drwxr-xr-x  15 root root 4.0K Jul  5 07:34 centminmod

 

I went ahead and made another upgrade through the menu btw :

21). Update - Nginx + PHP-FPM + Siege

After restarting the services, my site went down.

Code:

Restarting nginx (via systemctl):  Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.

More investigating :

Code (Text):

nginx: [emerg] module "ngx_http_image_filter_module" is already loaded in /usr/local/nginx/conf/dynamic-modules.conf:4
nginx: configuration file /usr/local/nginx/conf/nginx.conf test failed

In /usr/local/nginx/conf/nginx.conf, I commented out :

Code (Text):

include /usr/local/nginx/conf/dynamic-modules.conf;

And after a restart, my website was back up. I don't need that line, right?

But there is one more problem :

Code (Text):

Starting php-fpm [05-Jul-2017 08:59:33] NOTICE: PHP message: PHP Warning:  PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20121212/mailparse.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20121212/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0

 

Done 4 and 5.

Site goes down and I can't restart :

Code (Text):

# nprestart
Restarting nginx (via systemctl):  Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.
                                                           [FAILED]
Gracefully shutting down php-fpm . done
Starting php-fpm  done

More details :

Code (Text):

# systemctl status nginx.service
● nginx.service - SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server
   Loaded: loaded (/etc/rc.d/init.d/nginx; bad; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2017-07-05 10:03:17 UTC; 1min 29s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 10332 ExecStop=/etc/rc.d/init.d/nginx stop (code=exited, status=0/SUCCESS)
  Process: 10341 ExecStart=/etc/rc.d/init.d/nginx start (code=exited, status=1/FAILURE)
 Main PID: 6429 (code=exited, status=0/SUCCESS)

Jul 05 10:03:17 hostname.domain.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Jul 05 10:03:17 hostname.domain.com nginx[10341]: Starting nginx: nginx: [emerg] module "ngx_http_image_filter_module" is already loaded in /usr/...s.conf:4
Jul 05 10:03:17 hostname.domain.com nginx[10341]: [FAILED]
Jul 05 10:03:17 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jul 05 10:03:17 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Jul 05 10:03:17 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Jul 05 10:03:17 hostname.domain.com systemd[1]: nginx.service failed.
Hint: Some lines were ellipsized, use -l to show in full.

Code (Text):

# journalctl -xe
--
-- Unit nginx.service has begun starting up.
Jul 05 10:03:17 hostname.domain.com nginx[10341]: Starting nginx: nginx: [emerg] module "ngx_http_image_filter_module" is already loaded in /usr/local/nginx
Jul 05 10:03:17 hostname.domain.com nginx[10341]: [FAILED]
Jul 05 10:03:17 hostname.domain.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jul 05 10:03:17 hostname.domain.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jul 05 10:03:17 hostname.domain.com systemd[1]: Unit nginx.service entered failed state.
Jul 05 10:03:17 hostname.domain.com systemd[1]: nginx.service failed.
Jul 05 10:03:17 hostname.domain.com polkitd[3200]: Unregistered Authentication Agent for unix-process:10326:260134505 (system bus name :1.19736, object path
Jul 05 10:04:33 hostname.domain.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:60:dd:40:84:78:ac:57:aa:c1:08:00 SRC=91.230.47.38 DST=45.33
Jul 05 10:04:33 hostname.domain.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:60:dd:40:84:78:ac:57:a8:41:08:00 SRC=119.1.109.17 DST=45.33
Jul 05 10:05:01 hostname.domain.com systemd[1]: Started Session 9831 of user root.
-- Subject: Unit session-9831.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-9831.scope has finished starting up.
--
-- The start-up result is done.
Jul 05 10:05:01 hostname.domain.com systemd[1]: Starting Session 9831 of user root.
-- Subject: Unit session-9831.scope has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-9831.scope has begun starting up.
Jul 05 10:05:01 hostname.domain.com CROND[10365]: (root) CMD (/usr/lib64/sa/sa1 1 1)
Jul 05 10:05:42 hostname.domain.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:60:dd:40:84:78:ac:57:aa:c1:08:00 SRC=119.1.109.17 DST=45.33
Jul 05 10:06:18 hostname.domain.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:60:dd:40:84:78:ac:57:a8:41:08:00 SRC=222.186.52.7 DST=45.33
lines 1464-1498/1498 (END)

 

Code (Text):

# place custom load_module lines in this dynamic-modules-includes.conf
# file so that they persistent i.e. for manually dropped in dynamic modules
include /usr/local/nginx/conf/dynamic-modules-includes.conf;
load_module "modules/ngx_http_image_filter_module.so";
load_module "modules/ngx_http_fancyindex_module.so";
load_module "modules/ngx_stream_module.so";
# place custom load_module lines in this dynamic-modules-includes.conf
# file so that they persistent i.e. for manually dropped in dynamic modules
include /usr/local/nginx/conf/dynamic-modules-includes.conf;

 

/usr/local/nginx/conf/dynamic-modules-includes.conf is empty.

So I should use the commands at the bottom of your post to delete those files and recompile nginx? Just to confirm so I do the right thing, how do I recompile nginx? (Instructions to do so. Is it Centmin Mod Menu #4?).

 

@eva2000 Should I run YUM install checks? That's what I've been doing every time.

 

Still fails to restart if I do not comment out include /usr/local/nginx/conf/dynamic-modules.conf;

Going to get the log files now.

 

And the two files remained deleted :

• dynamic-modules.conf
• dynamic-modules-includes.conf

 

@eva2000 Just confirming, but the nginx recompile went through fine (it said it was installed at the end at least). It's just that I can't restart nginx when I try to. The only way it works is by commenting out dynamic-modules.conf

So should I try to troubleshoot centminmod?

Or just get the output of nginx -t when nginx isn't restarting? I did this before in an earlier post btw - Upgrade - Is this normal?