Nginx Linode stackscript Centmin Mod Nginx failed to restart

redbird · Jan 9, 2019

I just installed a new VPS on linode via centminmod stackscript and cannot start nginx for some reason.

Getting similar error as the person above. Any help would be appreciated.

Code:

[18:32][root@linode1.paytory.com ~]# nprestart
Restarting nginx (via systemctl):  Job for nginx.service failed because the cont                                                                                                                rol process exited with error code. See "systemctl status nginx.service" and "jo                                                                                                                urnalctl -xe" for details.
                                                           [FAILED]
Gracefully shutting down php-fpm . done
Starting php-fpm  done
[18:33][root@linode1.paytory.com ~]# systemctl status nginx.service
● nginx.service - SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server
   Loaded: loaded (/etc/rc.d/init.d/nginx; bad; vendor preset: disabled)
   Active: failed (Result: exit-code) since Tue 2019-01-08 18:33:30 UTC; 31s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 12427 ExecStart=/etc/rc.d/init.d/nginx start (code=exited, status=1/FAILURE)

Jan 08 18:33:30 linode1.paytory.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: Starting nginx: Error Opening file /usr/share/GeoIP/GeoIPCity.dat
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: nginx: [emerg] GeoIP_open("/usr/share/GeoIP/GeoIPCity.dat") failed in /usr/local/nginx/conf...p.conf:5
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: [FAILED]
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Unit nginx.service entered failed state.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
[18:34][root@linode1.paytory.com ~]# jo                                                                        urnalctl -xe
-bash: jo: command not found
[18:36][root@linode1.paytory.com ~]# journalctl -xe
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
-- Subject: Unit nginx.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has begun starting up.
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: Starting nginx: Error Opening file /usr/share/GeoIP/GeoIPCity.dat
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: nginx: [emerg] GeoIP_open("/usr/share/GeoIP/GeoIPCity.dat") failed in /usr/local/nginx/conf/geoip.conf
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: [FAILED]
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Unit nginx.service entered failed state.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service failed.
Jan 08 18:33:30 linode1.paytory.com polkitd[2115]: Unregistered Authentication Agent for unix-process:12421:14713 (system bus name :1.20, object path /o
Jan 08 18:33:43 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=45.227.255.223 DST
Jan 08 18:34:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=206.189.196.217 DS
Jan 08 18:34:59 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DS
Jan 08 18:35:02 linode1.paytory.com systemd[1]: Started Session 2 of user root.
-- Subject: Unit session-2.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-2.scope has finished starting up.
--
-- The start-up result is done.
Jan 08 18:35:02 linode1.paytory.com CROND[12457]: (root) CMD (/usr/lib64/sa/sa1 1 1)
Jan 08 18:35:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=103.85.85.71 DST=4
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=185.101.238.12 DST
Jan 08 18:35:26 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=176.119.4.18 DST=4
Jan 08 18:35:33 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DS
Jan 08 18:36:10 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DS
lines 1900-1942/1942 (END)
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
-- Subject: Unit nginx.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has begun starting up.
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: Starting nginx: Error Opening file /usr/share/GeoIP/GeoIPCity.dat
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: nginx: [emerg] GeoIP_open("/usr/share/GeoIP/GeoIPCity.dat") failed in /usr/local/nginx/conf/geoip.conf:5
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: [FAILED]
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Unit nginx.service entered failed state.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service failed.
Jan 08 18:33:30 linode1.paytory.com polkitd[2115]: Unregistered Authentication Agent for unix-process:12421:14713 (system bus name :1.20, object path /org/freedesktop/PolicyKit1/Authent
Jan 08 18:33:43 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=45.227.255.223 DST=45.79.19.21 LEN=40 TOS=0x00 PREC
Jan 08 18:34:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PRE
Jan 08 18:34:59 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PRE
Jan 08 18:35:02 linode1.paytory.com systemd[1]: Started Session 2 of user root.
-- Subject: Unit session-2.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-2.scope has finished starting up.
--
-- The start-up result is done.
Jan 08 18:35:02 linode1.paytory.com CROND[12457]: (root) CMD (/usr/lib64/sa/sa1 1 1)
Jan 08 18:35:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=103.85.85.71 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=439 TOS=0x08 PREC
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=440 TOS=0x08 PREC
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=441 TOS=0x08 PREC
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=441 TOS=0x08 PREC
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=439 TOS=0x08 PREC
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=185.101.238.12 DST=45.79.19.21 LEN=40 TOS=0x00 PREC
Jan 08 18:35:26 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=176.119.4.18 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0
Jan 08 18:35:33 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PRE
Jan 08 18:36:10 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PRE
~
~
~
~
~
~
~
~
lines 1900-1942/1942 (END)
Jan 08 18:33:07 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00
Jan 08 18:33:30 linode1.paytory.com polkitd[2115]: Registered Authentication Agent for unix-process:12421:14713 (system bus name :1.20 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object pa
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Starting SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server...
-- Subject: Unit nginx.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has begun starting up.
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: Starting nginx: Error Opening file /usr/share/GeoIP/GeoIPCity.dat
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: nginx: [emerg] GeoIP_open("/usr/share/GeoIP/GeoIPCity.dat") failed in /usr/local/nginx/conf/geoip.conf:5
Jan 08 18:33:30 linode1.paytory.com nginx[12427]: [FAILED]
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service: control process exited, code=exited status=1
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Failed to start SYSV: Nginx is an HTTP(S) server, HTTP(S) reverse proxy and IMAP/POP3 proxy server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: Unit nginx.service entered failed state.
Jan 08 18:33:30 linode1.paytory.com systemd[1]: nginx.service failed.
Jan 08 18:33:30 linode1.paytory.com polkitd[2115]: Unregistered Authentication Agent for unix-process:12421:14713 (system bus name :1.20, object path /org/freedesktop/PolicyKit1/Authentication
Jan 08 18:33:43 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=45.227.255.223 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00 T
Jan 08 18:34:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00
Jan 08 18:34:59 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00
Jan 08 18:35:02 linode1.paytory.com systemd[1]: Started Session 2 of user root.
-- Subject: Unit session-2.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-2.scope has finished starting up.
--
-- The start-up result is done.
Jan 08 18:35:02 linode1.paytory.com CROND[12457]: (root) CMD (/usr/lib64/sa/sa1 1 1)
Jan 08 18:35:20 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=103.85.85.71 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00 TTL
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=439 TOS=0x08 PREC=0x20 T
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=440 TOS=0x08 PREC=0x20 T
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=441 TOS=0x08 PREC=0x20 T
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=441 TOS=0x08 PREC=0x20 T
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=37.49.231.164 DST=45.79.19.21 LEN=439 TOS=0x08 PREC=0x20 T
Jan 08 18:35:24 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=185.101.238.12 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00 T
Jan 08 18:35:26 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:26:51:c4:00:41:08:00 SRC=176.119.4.18 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00 TTL
Jan 08 18:35:33 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00
Jan 08 18:36:10 linode1.paytory.com kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=f2:3c:91:c5:48:9a:00:1b:54:c2:50:c1:08:00 SRC=206.189.196.217 DST=45.79.19.21 LEN=40 TOS=0x00 PREC=0x00
~
~
~
~
~

redbird · Jan 9, 2019

Another update:
Code:
[18:44][root@linode1.paytory.com ~]# nginx -t
Error Opening file /usr/share/GeoIP/GeoIPCity.dat
nginx: [emerg] GeoIP_open("/usr/share/GeoIP/GeoIPCity.dat") failed in /usr/local/nginx/conf/geoip.conf:5
nginx: configuration file /usr/local/nginx/conf/nginx.conf test failed
It was a clean centmin install. How can I fix the error above? and why is it there in the first place?

George, your input would be appreciated.

eva2000 · Jan 9, 2019

You'll need to post on the forums with the following info

Server or VPS details ? XEN, KVM, OpenVZ, VMWare or dedicated server ? OS ? CentOS 6.9 or 7.4 ? 32bit or 64bit ?

What version of Centmin Mod ? .07 stable or 08 stable or .09 beta01 or another branch version ?

Was it fresh install or upgrade ?

Method of install ? Via centmin.sh menu option 1, Git install or curl one liner install as outlined at centminmod.com/download.html ?

How long ago did you install Centmin Mod ?

There's numerous code changes, bug fixes over time, so ensure you have latest Centmin Mod code installed by upgrading your Centmin Mod code as instructed below.

Troubleshooting Initial Install

To troubleshoot initial installation, you need to check the initial install log at /root/centminlogs and instructions under Sharing logs and errors heading for using Pastebin.com or Gists to share a sanitised version of the contents of the initial install log. You can see full details at How to troubleshoot Centmin Mod initial install issues

Example for 123.09beta01 and newer list /root/centminlogs files in date ascending order and grep for installer_*
Code (Text):
ls -lahrt /root/centminlogs | grep installer_*
example output returns install log at /root/centminlogs both a the full log and minimal log (smaller in size with some stuff filtered out)
Code (Text):
ls -lahrt /root/centminlogs | grep installer_*
-rw-r--r-- 1 root root 4.3M Jul 12 09:06 installer_120718-083445.log
-rw-r--r-- 1 root root 826K Jul 12 10:20 installer_120718-083445_minimal.log
Example for 123.08stable list /root/centminlogs files in date ascending order and grep for install.log
Code (Text):
ls -lahrt /root/centminlogs | grep install.log
example output returns install log at /root/centminlogs/centminmod_1.2.3-eva2000.09.001_111016-112321_install.log
Code (Text):
ls -lahrt /root/centminlogs | grep install.log
-rw-r--r--  1 root root 2.2M Oct 11 01:40 centminmod_1.2.3-eva2000.09.001_111016-112321_install.log
in SSH use cat to ouput contents of /root/centminlogs/centminmod_1.2.3-eva2000.09.001_111016-112321_install.log. Clear your SSH client window/buffer so only output is the contents of the file

for 123.08stable
Code (Text):
cat /root/centminlogs/centminmod_1.2.3-eva2000.09.001_111016-112321_install.log
for 123.09beta01 and newer
Code (Text):
cat /root/centminlogs/installer_120718-083445_minimal.log
Then copy and paste into Pastebin.com or Gists entry. If your SSH window scroll buffer isn't that large to get the whole contents of the install log, you can download file manually and copy and paste contents. But makes sure it's sanitised version of the contents of the initial install log as outlined at How to troubleshoot Centmin Mod initial install issues

redbird · Jan 9, 2019

Hey George,

Sorry for not formatting my post correctly.

It was a linode kvm VPS.
Linode 2GB ram 1 core fresh install of centminmod .09 beta via stackscripts (centos 7 64bit), installed today.

Here is the install log:
ZeroBin

eva2000 · Jan 9, 2019

what's output for these commands
Code (Text):
ls -lah /usr/share/GeoIP
Code (Text):
yum list GeoIP
Code (Text):
rpm -qa GeoIP
Probably best to retry fresh CentOS 7 reload and fresh 123.09beta01 install and see if it works

redbird · Jan 9, 2019

Code:

[08:55][root@linode1.paytory.com ~]# ls -lah /usr/share/GeoIP
total 3.5M
drwxr-xr-x.   2 root root 4.0K Jan  8 11:16 .
drwxr-xr-x. 118 root root 4.0K Jan  8 11:48 ..
lrwxrwxrwx.   1 root root   17 Jan  8 11:16 GeoIP.dat -> GeoIP-initial.dat
-rw-r--r--.   1 root root 1.2M Oct 30 10:58 GeoIP-initial.dat
lrwxrwxrwx.   1 root root   19 Jan  8 11:16 GeoIPv6.dat -> GeoIPv6-initial.dat
-rw-r--r--.   1 root root 2.3M Oct 30 10:58 GeoIPv6-initial.dat
[08:55][root@linode1.paytory.com ~]# yum list GeoIP
Loaded plugins: priorities, versionlock
283 packages excluded due to repository priority protections
Installed Packages
GeoIP.x86_64                                 1.5.0-13.el7                                  @base
[08:55][root@linode1.paytory.com ~]# rpm -qa GeoIP
GeoIP-1.5.0-13.el7.x86_64
[08:55][root@linode1.paytory.com ~]#

You mean just do a manual centos install and then centmin install?

What's a point of using stackscripts then?

eva2000 · Jan 10, 2019

no i meant rebuild linode vps with stackscript again as I did do an update to 123.09beta01 for legacy GeoIP database downloads will have been removed as at Jan 2, 2019 Beta Branch - prep work for GeoIP2 Lite nginx module support 123.09beta01

the update Beta Branch - update local version maxmind GeoIP legacy database in 123.09beta01

indeed your install is missing one legacy GeoIP database in /usr/share/GeoIP as the download url is gone, you can try just downloading that instead of fresh stackscript install
Code (Text):
cd /usr/share/GeoIP
wget https://centminmod.com/centminmodparts/geoip-legacy/GeoLiteCity.gz -O /usr/share/GeoIP/GeoLiteCity.dat.gz
gzip -d -f /usr/share/GeoIP/GeoLiteCity.dat.gz
cp -a /usr/share/GeoIP/GeoLiteCity.dat /usr/share/GeoIP/GeoIPCity.dat
ngxrestart
if that works, i'd edit your above post to remove the install log from public viewing if you hadn't santized any sensitive info. Hence, suggestion to reload CentOS 7 OS and rebuild via stackscript again so you get a fresh 123.09beta01 install with fresh passwords generated for various stuff to void any leaked sensitive info in install log

BoostN · Jan 10, 2019

I'm having the same problem actually on a fresh linode install using the Beta php7.2 installer.

eva2000 · Jan 10, 2019

BoostN said: ↑

I'm having the same problem actually on a fresh linode install using the Beta php7.2 installer.
Click to expand...

when was it installed, the fix was updated ~23hrs ago Beta Branch - update local version maxmind GeoIP legacy database in 123.09beta01

redbird · Jan 10, 2019

Thanks George. Will reinstall via stackscript first thing tomorrow morning. Will update you with the results.

Update:
Instructions above worked like a charm. I have just added a missing geoip file and nginx restarted just fine.

I don't think I have any sensitive data in that log. I removed all passwords hostnames and IPs before posting. What else can be sensitive there?

So, I guess I'll just keep it as is for now.

redbird · Jan 11, 2019

I don't see the option to edit the existing post. Only reply or quote. Please advise. Would like to remove the log file

Log in / Register

Forums

Want more timely Centmin Mod News Updates?

Nginx Linode stackscript Centmin Mod Nginx failed to restart

redbird Member

redbird Member

eva2000 Administrator Staff Member

Troubleshooting Initial Install

redbird Member

eva2000 Administrator Staff Member

redbird Member

eva2000 Administrator Staff Member

BoostN Active Member

eva2000 Administrator Staff Member

redbird Member

redbird Member

.

Log in / Register

Useful Searches

Want more timely Centmin Mod News Updates?

Nginx Linode stackscript Centmin Mod Nginx failed to restart

redbird Member

redbird Member

eva2000 Administrator Staff Member

Troubleshooting Initial Install

redbird Member

eva2000 Administrator Staff Member

redbird Member

eva2000 Administrator Staff Member

BoostN Active Member

eva2000 Administrator Staff Member

redbird Member

redbird Member

.