/ Register

Learn about Centmin Mod LEMP Stack today
Become a Member

WebP Configuration, No WebP Images

Discussion in 'Web Development & Web Performance' started by Mrbo, Feb 27, 2019.

Previous Thread Next Thread
Loading...
  1. Feb 27, 2019 #1
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    I tried to follow this guide, but I think I missed something because I dont get any WebP files. I got through the whole process just fine without any errors, but as I mentioned, no WebP images.

    I installed optimise-images.sh and added the config to vhost. Do I need to run any command after that for it to take effect on the vhost?

    I ran this command in the terminal in cd optimise-images. Do I need to run it in any other way? Do I need to add / at the end of uploads?
    wp_upload_dir='/home/nginx/domains/mydomain.com/public/wp-content/uploads'
     
  2. Feb 27, 2019 #2
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    everything after sentence
    is run from SSH command line to proceed with actual optimise-images.sh run for optimising images

    so you need to run

    set wp_upload_dir variable to point to your Centmin Mod wordpress install's upload directory
    Code (Text):
    wp_upload_dir='/home/nginx/domains/domain.com/public/wp-content/uploads'

    Then run this find command to go through 2nd level directories under /uploads and run optimise-images.sh profile mode
    Code (Text):
    find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d | grep -E '[0-9]{4}' | sort | while read d; do if [[ "$(ls -Al $d | head -n1 | grep -o 'total 0')" != 'total 0' ]]; then echo "profile directory: $d"; echo "/root/tools/optimise-images/optimise-images.sh profile $d"; /root/tools/optimise-images/optimise-images.sh profile $d; fi; done

    Next run optimise-images.sh optimise-cron mode to begin optimising and doing WebP conversions
    Code (Text):
    find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d | grep -E '[0-9]{4}' | sort | while read d; do if [[ "$(ls -Al $d | head -n1 | grep -o 'total 0')" != 'total 0' ]]; then echo "optimise directory: $d"; echo "/root/tools/optimise-images/optimise-images.sh optimise-cron $d"; /root/tools/optimise-images/optimise-images.sh optimise-cron $d; chown -R nginx:nginx $d; fi; done
     
  3. Feb 27, 2019 #3
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    I did exactly that. I think I found part of the problem.
    It only converted images in this folder and no other folder:
    /home/nginx/domains/mydomain.com/public/wp-content/uploads/elements/
     
  4. Feb 27, 2019 #4
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    those commands look for /upload directories of specific name format so what's output for
    Code (Text):
    wp_upload_dir='/home/nginx/domains/domain.com/public/wp-content/uploads'
find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d

    and
    Code (Text):
    wp_upload_dir='/home/nginx/domains/domain.com/public/wp-content/uploads'
find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d | grep -E '[0-9]{4}' | sort
     
  5. Feb 27, 2019 #5
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    Code:
    [23:29][root@contribution optimise-images]# wp_upload_dir='/home/nginx/domains/webdigitos.com/public/wp-content/uploads'
[23:29][root@contribution optimise-images]# find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/mainwp/backup
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/ithemes-security/backups
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/ithemes-security/logs
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/ithemes-security/maxmind
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elementor/thumbs
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elementor/css
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/2019/01
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-40-1550819617
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-18-1548864660
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-260-1548869595
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-24-1550055994
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-6-1548864851
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-109-1548864717
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-43-1551194438
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-20-1548864828
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187340
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187104
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-15-1548869420
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187143
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-30-1548870230
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-217-1548864987
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-10-1548864726
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-40-1550744490
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-35-1548870815
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-511-1548869473
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187274
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-31-1548864709
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-29-1548864794
    and

    Code:
    [23:29][root@contribution optimise-images]# wp_upload_dir='/home/nginx/domains/webdigitos.com/public/wp-content/uploads'
[23:30][root@contribution optimise-images]# find $wp_upload_dir -maxdepth 2 -mindepth 2 -type d | grep -E '[0-9]{4}' | sort
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/2019/01
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-10-1548864726
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-109-1548864717
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-15-1548869420
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-18-1548864660
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-20-1548864828
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-217-1548864987
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-24-1550055994
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-260-1548869595
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-29-1548864794
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-30-1548870230
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-31-1548864709
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-35-1548870815
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-40-1550744490
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-40-1550819617
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-43-1551194438
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-511-1548869473
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187104
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187143
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187274
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-5-1551187340
/home/nginx/domains/webdigitos.com/public/wp-content/uploads/elements/template-6-1548864851
    And no images converted in root uploads folder.
     
  6. Feb 27, 2019 #6
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    that's by design, those commands are only looking into /uploads/ subdirectories from the 2nd command you posted output

    if you want to run against /uploads directory just run the optimise-images.sh against that directory itself
     
  7. Feb 27, 2019 #7
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    Now I get it. Great, thanks!
     
  8. Feb 27, 2019 #8
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    If I set mindepth 0, will it then convert and optimize the root folder as well so I don't have to run multiple jobs for different levels?
     
  9. Feb 27, 2019 #9
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    you can always do tests on a test directory or copy of your intended directory/subdirectories first to be safe
     
  10. Feb 27, 2019 #10
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    It didnt work to set min depth to 0. I tried to remove max and min depth but that didnt work either. Is there any other solution or workaround?
     
  11. Feb 27, 2019 #11
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    just do /upload top level as a separate optimise-images.sh command run against the path to upload directory itself
     
  12. Mar 23, 2019 #12
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    Hi! I tried multiple ways to get it working on root /upload but I think im not getting it since nothing happens?

    Would you mind explaining a bit more on what I should do to get it to run on root of the upload?
     
  13. Mar 24, 2019 #13
    eva2000

    eva2000 Administrator Staff Member

    58,905
    12,490
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +19,122
    Local Time:
    9:01 AM
    Nginx 1.31.x
    MariaDB 10.x/11.4+/12.3+
    from centminmod/optimise-images just pointing to directory doesn't work ?

    to profile first
    Code (Text):
    /root/tools/optimise-images/optimise-images.sh profile /home/nginx/domains/webdigitos.com/public/wp-content/uploads

    what do you get for output

    post output in CODE/CODEB tags if it's very long just an excerpt of a few lines would do listing images it picked up in profile mode i.e. centminmod/optimise-images
     
  14. Mar 24, 2019 #14
    Mrbo

    Mrbo Member

    113
    7
    18
    Jun 17, 2018
    Ratings:
    +7
    Local Time:
    6:01 AM
    The output just goes on like this for a few 100 lines.

    Code:
    images in /home/nginx/domains/webdigitos.com/public/wp-content/uploads
logged at /home/optimise-logs/profile-log-230319-183027.log
------------------------------------------------------------------------------
image : 50827418_23843194711290157_7060222641671503872_n-24x24.png : 24 : 24 : 92 : False : 8 : 1095 : nginx : nginx
image : 50836078_23843400483450734_5906574617576734720_n-150x150.png : 150 : 150 : 92 : True : 8 : 21923 : nginx : nginx
image : 50836078_23843400483450734_5906574617576734720_n-200x300.png : 200 : 300 : 92 : True : 8 : 43107 : nginx : nginx
    Should I change some specific code outlined in the tutorial?
     
Previous Thread Next Thread
Loading...

.