Get the most out of your Centmin Mod LEMP stack
Become a Member

Allowing multiple connections from same IP/browser?

Discussion in 'Nginx, PHP-FPM & MariaDB MySQL' started by Codexer, Apr 12, 2017.

  1. Codexer

    Codexer New Member

    5
    0
    1
    Dec 8, 2014
    Ratings:
    +0
    Local Time:
    3:08 PM
    1.7
    5.5
    Hi,

    Something I've noticed is that when I have a browser open with multiple tabs from the same domain, I can't reload or browse in one tab while another is still loading.

    Is this specific to a centminmod setting? If so, where can it be changed? AFAIK it's not browser related, as only centminmod installs seem to hold the connections.

    For further info: An app I am developing requires a lot processing via the browser where a script may take 20-30 seconds to run, in that 20-30s I cannot browse other pages of a domain.

    Thanks
     
  2. eva2000

    eva2000 Administrator Staff Member

    28,942
    6,570
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +9,751
    Local Time:
    3:08 PM
    Nginx 1.13.x
    MariaDB 5.5
    Is this local lan testing with local PC browsing local setup server? If you access your site from VPN or http proxy to mask your ISP ip address, is it any better as to how many browser tabs you load at the same time ? Could be CSF Firewall based too. See FAQ items 40 & 41 for details and clues.
    1. Is it a wordpress site or what web app /script on server you testing from browser ?
    2. Is the script php based ?
    3. Do any other php-fpm based non-centmin mod servers have same issue or is centmin mod the only php-fpm LEMP stack you tried?
    As php-fpm has worker process limits (max_children) etc. i.e. your script is hogging the php-fpm limited processes for ~30 seconds each. You can enable php-fpm status monitoring and also check php-fpm error logs to check.

    Centmin Mod is provide as is, so short of scripted related bugs or issues, any further optimisation to the web stack components - nginx, php-fpm, mariadb mysql, csf firewall etc or web app specific configurations are left to the Centmin Mod user to deal with. So I do not provide any free support for such.

    Bad gateway 502 /504 timeouts are usually related to Nginx timing out waiting on PHP-FPM to respond as PHP-FPM is overloaded or overwhelmed with requests, so may need to tune PHP-FPM values. It also maybe due to PHP-FPM in turn being queued and backed up waiting on MariaDB MySQL server to respond - so also need to look at MySQL.

    You'll need to tune your PHP-FPM settings with php-fpm main pool config file at /usr/local/etc/php-fpm.conf (overview of config files) and this is left up to end user to do but here's a thread for starters to enable php status page output outlined at

    Checking PHP-FPM etc logs



    You'll also need to check into your PHP-FPM, Nginx and MariaDB logs which you can find as outlined at How to troubleshoot Centmin Mod initial install issues

    Server logs include Nginx, PHP-FPM, MariaDB MySQL error logs as well as others. You can find your Centmin Mod install/menu logs at FAQ 7 and server logs at FAQ 19 at Centmin Mod FAQ (most up to date info in FAQ so always read that first). Spoiler tag below has info too but may not be up to date.

    Some of Centmin Mod's installed software will have their own access and error logs which maybe useful for diagnosing errors or give info, notes, or warning notices.

    Note: There's no support provided by me for diagnosing such errors which may occur for various reasons including misconfiguration of installed php/mysql scripts or applications.

    In SSH2 telnet you can use tail command to view the last X number of lines in the file.

    For example for viewing last 10 lines in the file for:

    For Nginx access and error logs:
    Code:
      tail -10 /usr/local/nginx/logs/access.log
      tail -10 /usr/local/nginx/logs/error.log
    
    For specific domainname.com access and error log:
    Code:
      tail -10 /home/nginx/domains/domainname.com/log/access.log
      tail -10 /home/nginx/domains/domainname.com/log/error.log
    
    For other system error logs located at /var/log:

    list /var/log files in ascending time order so the most recently modified files are at the bottom
    Code:
      ls -lhrt /var/log
    
    Code:
    total 2.7M
    -rw------- 1 root  root    0 Aug 29 15:33 tallylog
    -rw------- 1 root  root    0 Aug 29 15:33 spooler
    drwx------ 3 root  root 4.0K Aug 29 15:35 samba
    drwxr-xr-x 2 root  root 4.0K Aug 29 15:35 mail
    -rw-r--r-- 1 root  500     0 Oct  8 18:13 dmesg.old
    -rw------- 1 root  500     0 Oct  8 18:13 boot.log
    -rw-r--r-- 1 root  500     0 Oct  8 18:14 dmesg
    drwx------ 2 root  root 4.0K Oct  8 18:14 httpd
    drwxr-xr-x 2 root  root 4.0K Oct  8 19:08 php-fpm
    -rw-rw---- 1 mysql root 2.3K Oct  9 12:38 mysqld.log
    -rw------- 1 root  root 9.2K Oct 26 10:48 yum.log
    -rw------- 1 root  utmp  94K Nov  7 22:59 btmp
    drwxr-xr-x 2 root  root 4.0K Nov  8 00:00 sa
    -rw------- 1 root  root 269K Nov  8 21:39 messages
    -rw------- 1 root  root 110K Nov  8 23:08 secure
    -rw-rw-r-- 1 root  utmp  43K Nov  8 23:08 wtmp
    -rw-r--r-- 1 root  root 144K Nov  8 23:08 lastlog
    -rw------- 1 root  root  69K Nov  8 23:08 lfd.log
    -rw------- 1 root  root 332K Nov  8 23:08 maillog
    -rw------- 1 root  500  1.6M Nov  8 23:10 cron
    
    For PHP-FPM error log:
    Code:
      tail -10 /var/log/php-fpm/www-error.log
    
    and/or
    Code:
      /var/log/php-fpm/www-php.error.log
    
    For MySQL / MariaDB error log:
    Code:
      tail -10 /var/log/mysqld.log
    
    For CSF firewall LFD log:
    Code:
      tail -10 /var/log/lfd.log
    
    For Mail log:
    Code:
      tail -10 /var/log/maillog
    
    For Cron job logs:
    Code:
      tail -10 /var/log/cron
    

    How to edit php.ini and php-fpm configuration files ?



    Centmin Mod install created command short cuts outlined here to allow you to quickly edit your /usr/local/lib/php.ini file and your /usr/local/etc/php-fpm.conf file. Full list of command shortcuts below:
    • Edit php.ini = phpedit ( /usr/local/lib/php.ini )
    • Edit my.cnf = mycnf ( /etc/my.cnf )
    • Edit php-fpm.conf = fpmconf ( /usr/local/etc/php-fpm.conf )
    • Edit nginx.conf = nginxconf ( /usr/local/nginx/conf/nginx.conf )
    • Edit (nginx) virtual.conf = vhostconf - only edits /usr/local/nginx/conf/conf.d/virtual.conf not the additional vhost domain.com.conf files added later
    • Edit (nginx) php.conf = phpinc ( /usr/local/nginx/conf/php.conf )
    • Edit (nginx) drop.conf = dropinc ( /usr/local/nginx/conf/drop.conf )
    • Edit (nginx) staticfiles.conf = statfilesinc ( /usr/local/nginx/conf/staticfiles.conf )
    • nginx stop/start/restart = ngxstop/ngxstart/ngxrestart
    • php-fpm stop/start/restart = fpmstop/fpmstart/fpmrestart
    • mysql stop/start/restart = mysqlstop/mysqlstart/mysqlrestart
    • nginx + php-fpm stop/start/restart = npstop/npstart/nprestart
    • memcached stop/start/restart =memcachedstop/memcachedstart/memcachedrestart
    • csf stop/start/restart = csfstop/csfstart/csfrestart

    Troubleshooting Tools



    However, there's many linux tools and scripts that can help you figure out what was causing the load issues and when.

    Tools and commands you will want to read up on and learn for basic system admin tasks and troubleshooting.
    Notes:
    However, Centmin Mod users are free to help each other out and ask questions or give answers on this community forum. My hopes are that this community forum evolves so that more veteran long time Centmin Mod users help new Centmin Mod users out :)
     
    Last edited: Apr 12, 2017
  3. Codexer

    Codexer New Member

    5
    0
    1
    Dec 8, 2014
    Ratings:
    +0
    Local Time:
    3:08 PM
    1.7
    5.5
    Non centminmod servers don't have the same problem. It's a PHP script I've written, no pre-made apps or anything. They're also relatively simple.

    It happens on both local machine and on remote web servers so it's definitely got to be a setting somewhere. If I load one window in a browser with VPN/proxy enabled and another with my raw connection, they can both load pages while the other is loading/processing.

    I'll try fiddle with the firewall and see what happens.
     
  4. eva2000

    eva2000 Administrator Staff Member

    28,942
    6,570
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +9,751
    Local Time:
    3:08 PM
    Nginx 1.13.x
    MariaDB 5.5
    sounds CSF Firewall related possibly then so see FAQ items 40 & 41 for details and clues.
     
  5. eva2000

    eva2000 Administrator Staff Member

    28,942
    6,570
    113
    May 24, 2014
    Brisbane, Australia
    Ratings:
    +9,751
    Local Time:
    3:08 PM
    Nginx 1.13.x
    MariaDB 5.5
    also does this happen on my forums here if you load multiple tabs ? could be related to your script + csf firewall