Separate names with a comma.
Is this used in centminmod? I see these posts here but not sure how relevant to the casual users like me.
When using centmin.sh option 24, it tells me nasm is available to update but after running
yum update --disableplugin=priorities...
Even essential websites shutdown for maintenance.
You can do it at 2AM.
Turn of all the addons via config.php file and do the upgrade.
Then turn on one by one to see which one causes issue.
I just ran a ssl labtest and found that my site still have support for TLS 1.0 and 1.1
So I edited...
I will leave them as is.
Seems like 7.7 is deprecated. I got this error. Should I remove it?
pip install --upgrade pip
DEPRECATION: Python 2.7 reached the end of its life...
updated to latest nginx and php 7.4.2 and have no problem with log into wordpress.
any tip or issue you ran into?
Do you have a public interface for it that I can try out?
Looking to integrate this on CMM and the instruction looks simple enough. I wonder if anyone tried this before?...
they just asked me to check if the firewall block authorize.net access. I'm not sure the best way to check access log on that specific date and...
I have a payment gateway via authorize.net that recently failed to connect with these errors messages. I am trying to see if their IP is blocked...
I see a Dec 27th date
ls -lAh /var/lib/csf/Geo/
-rw------- 1 root root 55 Dec 27 10:00 COPYRIGHT.txt
-rw------- 1 root root 13M Dec 27 10:00...
It wasn't a problem until recently i believe. version 7.4 or so.
Updated to php 7.4.1 and elastic 7.5.1 and it fails to start.
Anyone with issue?
You got it.
Updated again to 7.4 and this time it works. Thanks a lot.
I will see if any errors popping up.
php --ri zlib
ZLib Support => enabled
Stream Wrapper => compress.zlib://
Stream Filter => zlib.inflate, zlib.deflate
Anyone know if centmin 7.4 has php74-zlib?
@looks like a lot of people have issue with 7.4 too...
Was able to locate the error at /var/log/php-fpm/www-php.error.log. Does this look like I need to install zlib on PHP 7.4
Nothing related to Sendy shows up. The dev of sendy emailed me that they haven't tested it with php 7.4.0 yet.
Just curious to see if other CMM...
How would I search error log for any hints regarding this sendy blank page error?
Yes, it seems to be not ready for 7.4. Downgrade works again.
Anyone with latest Sendy version got broken/blank page after updating to PHP 7.4?
Just updated all and check kernel and still have the old one
Is there a way to force the newest kernel?
Did anyone upgrade and have any issue?
poll should have 7.3 version.
I'm using 7.3.1 at the moment.
looks like it's a go
XF 2.1 - PHP 7.3.1
Is centmin ready to run php 7.3.1 for xenforo yet?
get it updated to xf 2.1 for better performance
which version of xenforo are you using?
What kind of warning?
when will php 7.3 fully supported by Centminmod?
How about that knock out HYS that XF 2.1 just delivered today. Wow, I can't wait to start playing with it.
i want xf 2.1 now
6.4.1 is now available.
Yeap. Just upgraded.
It seems a bit different :)
I guess i will just wait for you to feel comfortable enough with 10.3 and give it your approval before upgrading.
When do you estimate that you will officially support upgrading to 10.3 from 10.2 directly from centmin.
Appreciate your reporting of xf2 bugs. It helps everyone getting better product.
i have half dozen critical big item custom addons which took me a...
How come it not on XF2 yet?
how does it look on mine. i'm surprised there is only 8mb allocated to it and there still plenty unused.
How do we check if memcached is actually caching xenforo files, etc?
what is the optimal setting for centminmod running xf2 then
do we need session cache?
i see George saying something about 'memcached.hostname.com'...
6.3.1 is available via yum update.
Do we need to restart something? I yum updated fine but mysql -v still shows 10.2.15
updated my main server from 10.1 to 10.2 today without issue.
Anyone has used and can recommend some simple modern email template for Sendy?
Yes, it already exists.
What I did prior to trying option is to install WP directly on a subdirectory /wp/ and add this line to the nginx config...
The server has several existing vhosts.
This is the sequence after selection option 22 of centminmod...
I just tried this on a server that already has an existing vhost and it proceeded all the way until asking for FTP username before backing out...
Just want to see if there is any changes in centmin the last 2 years regarding installing WP in a subfolder where Xenforo is installed on root?
What are you plans for the next 5 years?
Congrats on growing the forum as a dependable place for admin to control their servers. I wouldn't be able to grow the sites without help from...
Still not updated for me yet using yum update.
Is there any log showing history of the server reboot and which actions caused it?
Yesterday I had a scare with my newly purchased dedicated server. I logged in SSH and saw that the server was rebooted a few minutes earlier. Soon...
Apparently, my site is not images heavy
total images: 260 total size: 14076 KB avg size/image: 54 KB
Updated without issue.
Thank you George. that's a relief.
I got A+ for over30care but only A for quantnet.org and no issue/warning about the second for the over30care...
I wonder how is this being maintained currently? Is it still updated via option 19 menu?
I got a new dedi box, install centmin latest and use option 2 to create a new vhost/ssl cert for the over30care.com domain.
Everything went fine...
Anyone knows what we need to do to config ES to work over HTTPS connection?
There is an option in Xenforo 2.0 that allows this over https.
Was able to find a solution by replacing ereg with mb_ereg which is direct replacement function and not deprecated in PHP 7.
not going to work, you need to replace ereg
It's part of a PHP file in wordpress
I have a few ereg expressions that no longer work in PHP 7 and I read that the equivalence is preg_match
Would really appreciate if anyone with...
I'm getting another dedicated server from ReliableSite and will move my existing server there. A couple of question.
1) I usually...
How will this translate to us centmin users?
How can I do a redirect from http to https inside a location block?
That is, if people go to /forum directory, they will be forced to go...
I have a server that hosts XF forum under /forum that serves xf.domain.com and a /wordpress installation that goes to domain.com/wp
I wonder if...
Thank you for your input George. Really appreciate it.
I see many area where I can help him save in cost, optimize the site so in the long term,...
So this is maybe off topic but I'm sure some of you guys may have some input.
I'm in talk with someone who have a few websites servers that run...
With every going on, is it safe to update yet? I hardly see a new nginx update with 5 pages of posts and it scares me.
Arg, I was excited thinking it's browser push notification :)
so so so, tell us in layman terms what can we do with it now? :)
Yes, both on my xf 1.5 and 2.0 installations.
I did pause a few seconds when I wrote that since it may be read the wrong way. :)
Let me rephrase it. I saw some people reports issues with...
I don't use it. Everytime i see some issue reported on XF forum, it turns out to be cloudflare related.
I'm sure there are benefits to it but I...
I read that it has remote mysql backup so I was thinking of running the script on my main server and still get DB backups of other remote servers?
I read that whole thread and since last update was in 2016, I'd like to see if it's applicable to my use case.
my main server is running latest...
May as well do it to support @eva2000 :)
Thanks for the suggestions. Since I already have S3, may as well use it.
I started reading on a few guides on making script to backup to S3. They...
How big is your backup server? How much data do you back up? Do you rsync or copy full back up copies over everytime?
I have to make a choice between these options and want to see what is the best choice
Getting the FTP backup server from my host (reliablesite)...
My glances version is higher
Glances v2.11.1 with psutil v5.4.3
Yup. Looks like that's it. Thanks all.
couldn't install psutils
pip install --upgrade psutil --force-reinstall -v | egrep 'ccache|gcc|installed'
gcc -fno-strict-aliasing -O2 -g...
Got similar errors for both upgrades
psutil/_psutil_common.c:9:20: fatal error: Python.h: No such file or directory
Glances v2.5.1 with psutil v2.2.1
# pip install --upgrade psutil
-bash: pip: command not found
I have 32GB ram on my server and most of the time, it uses only 3-4GB ram.
My server runs a pretty standard XF, Sendy, elasticsearch and standard...
With issues with Intel CPU architecture recently discovered, is it wise to move to AMD instead?
I tried to price the same specs on various cloud providers (vultr, DO, etc) and they will cost hundreds more each month. I wonder why a dedicated...
Just looked at my invoice and see that i've been with the same host for several years using Quad Core Server - Intel Xeon E3 1230v3,...
I seem to have the latest kernel after the reboot
However this command returns nothing
yum list updates -q |...
So you just remove those addons without their replacements or does XF 2 have those functions already?
How do you reboot a dedicated server with reliablesite.net?
Couldn't find any info on their website so i sent them a ticket but hopefully anyone...
Got a back up server running cmm and copy of my live site to test the last few months.
Got a few custom addons being developed and I would hope to...
So the solution is remove ES, reinstall it to get it to work again.