grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / Installed: bc-1.07.1-23.el10.x86_64 Ok: physically installed memory is sufficient for Centmin Mod Installation [Installed: 7484 MB >= 256 MB memory] Installed: virt-what-1.27-2.el10.x86_64 Optimizing /etc/dnf/dnf.conf settings determining the fastest mirror (10 hosts).. done. AlmaLinux 10 - AppStream 9.3 kB/s | 3.8 kB 00:00 AlmaLinux 10 - BaseOS 200 kB/s | 3.8 kB 00:00 AlmaLinux 10 - CRB 177 kB/s | 3.8 kB 00:00 AlmaLinux 10 - Extras 188 kB/s | 3.3 kB 00:00 Dependencies resolved. Nothing to do. Complete! Installed: avahi-libs-0.9~rc2-1.el10_0.1.x86_64 libuv-1:1.51.0-1.el10_0.x86_64 lm_sensors-libs-3.6.0-20.el10.x86_64 pcp-conf-6.3.7-1.el10_0.x86_64 pcp-libs-6.3.7-1.el10_0.x86_64 sysstat-12.7.6-2.el10.x86_64 real 0m1.157s user 0m0.515s sys 0m0.251s ************************************************* * Installing NTP and syncing time ************************************************* The date/time before was: Sun Oct 5 06:02:45 PM UTC 2025 Last metadata expiration check: 0:00:01 ago on Sun 05 Oct 2025 06:02:44 PM UTC. No match for argument: ntp Error: Unable to find a match: ntp real 0m0.274s user 0m0.210s sys 0m0.059s betainstaller83.sh: line 1307: chkconfig: command not found The date/time is now: Sun Oct 5 06:02:45 PM UTC 2025 26 files removed betainstaller83.sh: line 1982: /sys/module/nf_conntrack/parameters/hashsize: No such file or directory kernel.pid_max = 65536 kernel.printk = 4 1 1 7 fs.nr_open = 12000000 fs.file-max = 9000000 net.core.wmem_max = 16777216 net.core.rmem_max = 16777216 net.ipv4.tcp_rmem = 8192 87380 16777216 net.ipv4.tcp_wmem = 8192 65536 16777216 net.core.netdev_max_backlog = 65536 net.core.somaxconn = 65535 net.core.optmem_max = 8192 net.ipv4.tcp_fin_timeout = 30 net.ipv4.tcp_keepalive_intvl = 30 net.ipv4.tcp_keepalive_probes = 3 net.ipv4.tcp_keepalive_time = 240 net.ipv4.tcp_max_syn_backlog = 65536 net.ipv4.tcp_sack = 1 net.ipv4.tcp_syn_retries = 3 net.ipv4.tcp_synack_retries = 2 sysctl: cannot stat /proc/sys/net/ipv4/tcp_tw_recycle: No such file or directory net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_max_tw_buckets = 1440000 vm.swappiness = 10 vm.min_free_kbytes = 65536 net.ipv4.ip_local_port_range = 1024 65535 net.ipv4.tcp_slow_start_after_idle = 0 net.ipv4.tcp_rfc1337 = 1 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.all.accept_source_route = 0 net.ipv4.conf.all.log_martians = 1 net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.default.log_martians = 1 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.secure_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_helper: No such file or directory sysctl: cannot stat /proc/sys/net/nf_conntrack_max: No such file or directory sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established: No such file or directory sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_generic_timeout: No such file or directory net.ipv4.tcp_challenge_ack_limit = 999999999 net.ipv4.tcp_mtu_probing = 1 net.ipv4.tcp_base_mss = 1024 installing yum packages... AlmaLinux 10 - AppStream 79 MB/s | 2.2 MB 00:00 AlmaLinux 10 - BaseOS 256 MB/s | 19 MB 00:00 AlmaLinux 10 - CRB 20 MB/s | 497 kB 00:00 AlmaLinux 10 - Extras 557 kB/s | 11 kB 00:00 No match for argument: libgcj Error: Unable to find a match: libgcj real 0m1.968s user 0m1.769s sys 0m0.128s Last metadata expiration check: 0:00:01 ago on Sun 05 Oct 2025 06:02:47 PM UTC. Package systemd-libs-257-9.el10_0.1.alma.1.x86_64 is already installed. Package virt-what-1.27-2.el10.x86_64 is already installed. Package attr-2.5.2-5.el10.x86_64 is already installed. Package gawk-5.3.0-6.el10.x86_64 is already installed. No match for argument: pyOpenSSL Package python3-dateutil-1:2.9.0.post0-1.el10_0.noarch is already installed. Package bc-1.07.1-23.el10.x86_64 is already installed. Package wget-1.24.5-5.el10.x86_64 is already installed. No match for argument: screen No match for argument: deltarpm Package ca-certificates-2024.2.69_v8.0.303-102.3.el10.noarch is already installed. Package bash-5.2.26-6.el10.x86_64 is already installed. No match for argument: mlocate Package rsyslog-8.2412.0-1.el10.x86_64 is already installed. No match for argument: imake Package coreutils-9.5-6.el10.x86_64 is already installed. Package cronie-1.7.0-9.el10.x86_64 is already installed. Package crontabs-1.11^20190603git9e74f2d-6.el10.noarch is already installed. Package cronie-anacron-1.7.0-9.el10.x86_64 is already installed. Package sysstat-12.7.6-2.el10.x86_64 is already installed. Package openssh-9.9p1-7.el10_0.x86_64 is already installed. Package file-5.45-7.el10.x86_64 is already installed. Package nano-8.1-3.el10.x86_64 is already installed. Package pkgconf-pkg-config-2.1.0-3.el10.x86_64 is already installed. Package iptables-libs-1.8.11-9.el10_0.x86_64 is already installed. Package iptables-nft-1.8.11-9.el10_0.x86_64 is already installed. Package diffutils-3.10-8.el10.x86_64 is already installed. Package which-2.21-44.el10_0.x86_64 is already installed. No match for argument: perl-Crypt-SSLeay No match for argument: t1lib No match for argument: t1lib-devel No match for argument: expect-devel Package readline-8.2-11.el10.x86_64 is already installed. Package libedit-3.1-52.20230828cvs.el10.x86_64 is already installed. Package openssl-1:3.2.2-16.el10_0.4.alma.1.x86_64 is already installed. Package curl-8.9.1-5.el10.x86_64 is already installed. Package openldap-2.6.8-3.el10.x86_64 is already installed. Package zlib-ng-compat-2.2.3-1.el10.x86_64 is already installed. No match for argument: pcre No match for argument: pcre-devel No match for argument: libidn No match for argument: libidn-devel Package libpng-2:1.6.40-8.el10.x86_64 is already installed. Package freetype-2.13.2-8.el10.x86_64 is already installed. Package libxml2-2.12.5-9.el10_0.x86_64 is already installed. Package glib2-2.80.4-4.el10_0.6.x86_64 is already installed. Package ncurses-6.4-14.20240127.el10.x86_64 is already installed. Package e2fsprogs-1.47.1-3.el10.x86_64 is already installed. No match for argument: libc-client No match for argument: libc-client-devel Package pam-1.6.1-7.el10.x86_64 is already installed. Package libaio-0.3.111-22.el10.x86_64 is already installed. Package libevent-2.1.12-16.el10.x86_64 is already installed. No match for argument: recode No match for argument: recode-devel No match for argument: libtidy No match for argument: libtidy-devel No match for argument: enchant No match for argument: enchant-devel No match for argument: ghostscript-fonts No match for argument: gl-manpages No match for argument: gtk2 No match for argument: ilmbase No match for argument: libXfont No match for argument: libwmf-lite Error: Unable to find a match: pyOpenSSL screen deltarpm mlocate imake perl-Crypt-SSLeay t1lib t1lib-devel expect-devel pcre pcre-devel libidn libidn-devel libc-client libc-client-devel recode recode-devel libtidy libtidy-devel enchant enchant-devel ghostscript-fonts gl-manpages gtk2 ilmbase libXfont libwmf-lite real 0m0.327s user 0m0.271s sys 0m0.053s Last metadata expiration check: 0:00:01 ago on Sun 05 Oct 2025 06:02:47 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: epel-release noarch 10-6.el10 extras 18 k Transaction Summary ================================================================================ Install 1 Package Total download size: 18 k Installed size: 25 k Downloading Packages: epel-release-10-6.el10.noarch.rpm 7.2 MB/s | 18 kB 00:00 -------------------------------------------------------------------------------- Total 988 kB/s | 18 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : epel-release-10-6.el10.noarch 1/1 Running scriptlet: epel-release-10-6.el10.noarch 1/1 Many EPEL packages require the CodeReady Builder (CRB) repository. It is recommended that you run /usr/bin/crb enable to enable the CRB repository. Installed: epel-release-10-6.el10.noarch Complete! real 0m0.638s user 0m0.313s sys 0m0.143s determining the fastest mirror (211 hosts).. done. Extra Packages for Enterprise Linux 10 - x86_64 4.7 MB/s | 4.8 MB 00:01 No match for argument: datamash Package jq-1.7.1-8.el10_0.1.x86_64 is already installed. No match for argument: jemalloc No match for argument: jemalloc-devel No match for argument: libmcrypt No match for argument: libmcrypt-devel No match for argument: oniguruma5php No match for argument: oniguruma5php-devel No match for argument: figlet Package libnghttp2-1.64.0-2.el10.x86_64 is already installed. No match for argument: pngquant No match for argument: pwgen Package pigz-2.8-7.el10.x86_64 is already installed. Package xz-1:5.6.2-4.el10_0.x86_64 is already installed. No match for argument: pxz No match for argument: libJudy No match for argument: bash-completion-extras No match for argument: mlocate No match for argument: cmake28 No match for argument: uw-imap-devel Error: Unable to find a match: datamash jemalloc jemalloc-devel libmcrypt libmcrypt-devel oniguruma5php oniguruma5php-devel figlet pngquant pwgen pxz libJudy bash-completion-extras mlocate cmake28 uw-imap-devel real 0m2.562s user 0m1.516s sys 0m0.171s Last metadata expiration check: 0:00:01 ago on Sun 05 Oct 2025 06:02:50 PM UTC. No match for argument: GeoIP No match for argument: GeoIP-devel Error: Unable to find a match: GeoIP GeoIP-devel real 0m0.415s user 0m0.329s sys 0m0.081s Last metadata expiration check: 0:00:02 ago on Sun 05 Oct 2025 06:02:50 PM UTC. Package which-2.21-44.el10_0.x86_64 is already installed. Package e2fsprogs-1.47.1-3.el10.x86_64 is already installed. Package bc-1.07.1-23.el10.x86_64 is already installed. Package libuuid-2.40.2-10.el10.x86_64 is already installed. Package openssl-1:3.2.2-16.el10_0.4.alma.1.x86_64 is already installed. Package zlib-ng-compat-2.2.3-1.el10.x86_64 is already installed. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: automake noarch 1.16.5-20.el10 appstream 705 k bluez-libs-devel x86_64 5.77-6.el10 crb 258 k bzip2-devel x86_64 1.0.8-25.el10 appstream 214 k cmake x86_64 3.30.5-3.el10_0 appstream 12 M e2fsprogs-devel x86_64 1.47.1-3.el10 appstream 66 k gcc x86_64 14.2.1-7.el10.alma.1 appstream 37 M gcc-c++ x86_64 14.2.1-7.el10.alma.1 appstream 15 M gd x86_64 2.3.3-20.el10_0 appstream 133 k gd-devel x86_64 2.3.3-20.el10_0 appstream 40 k gmp-devel x86_64 1:6.2.1-10.el10 appstream 173 k libXext-devel x86_64 1.3.6-3.el10 appstream 91 k libidn-devel x86_64 1.42-4.el10_0 epel 86 k libtool x86_64 2.4.7-13.el10 appstream 602 k libtool-ltdl-devel x86_64 2.4.7-13.el10 crb 166 k libuuid-devel x86_64 2.40.2-10.el10 appstream 39 k make x86_64 1:4.4.1-9.el10 baseos 589 k net-tools x86_64 2.0-0.73.20160912git.el10 baseos 302 k openldap-devel x86_64 2.6.8-3.el10 appstream 750 k openssl-devel x86_64 1:3.2.2-16.el10_0.4.alma.1 appstream 2.7 M yum-utils noarch 4.7.0-8.el10 baseos 38 k zlib-ng-compat-devel x86_64 2.2.3-1.el10 appstream 38 k Installing dependencies: autoconf noarch 2.71-12.el10 appstream 738 k bluez-libs x86_64 5.77-6.el10 baseos 80 k brotli x86_64 1.1.0-6.el10 appstream 20 k brotli-devel x86_64 1.1.0-6.el10 appstream 34 k cairo x86_64 1.18.2-2.el10 appstream 713 k cairo-devel x86_64 1.18.2-2.el10 appstream 199 k cmake-data noarch 3.30.5-3.el10_0 appstream 1.8 M cmake-filesystem x86_64 3.30.5-3.el10_0 appstream 15 k cpp x86_64 14.2.1-7.el10.alma.1 appstream 12 M cyrus-sasl x86_64 2.1.28-27.el10 baseos 71 k cyrus-sasl-devel x86_64 2.1.28-27.el10 appstream 116 k emacs-filesystem noarch 1:29.4-10.el10_0 appstream 8.9 k fontconfig x86_64 2.15.0-7.el10 appstream 273 k fontconfig-devel x86_64 2.15.0-7.el10 appstream 179 k freetype-devel x86_64 2.13.2-8.el10 appstream 966 k gettext x86_64 0.22.5-6.el10 baseos 1.1 M glib2-devel x86_64 2.80.4-4.el10_0.6 appstream 1.4 M glibc-devel x86_64 2.39-46.el10_0.alma.1 appstream 494 k gmp-c++ x86_64 1:6.2.1-10.el10 appstream 17 k graphite2-devel x86_64 1.3.14-17.el10 appstream 21 k harfbuzz-cairo x86_64 8.4.0-6.el10 appstream 29 k harfbuzz-devel x86_64 8.4.0-6.el10 appstream 460 k harfbuzz-icu x86_64 8.4.0-6.el10 appstream 15 k jbigkit-libs x86_64 2.1-31.el10 appstream 53 k kernel-headers x86_64 6.12.0-55.37.1.el10_0 appstream 2.1 M libICE x86_64 1.1.1-5.el10 appstream 75 k libSM x86_64 1.2.4-5.el10 appstream 43 k libX11 x86_64 1.8.10-1.el10 appstream 652 k libX11-common noarch 1.8.10-1.el10 appstream 189 k libX11-devel x86_64 1.8.10-1.el10 appstream 1.1 M libX11-xcb x86_64 1.8.10-1.el10 appstream 12 k libXau x86_64 1.0.11-8.el10 appstream 32 k libXau-devel x86_64 1.0.11-8.el10 appstream 14 k libXext x86_64 1.3.6-3.el10 appstream 39 k libXpm x86_64 3.5.17-5.el10 appstream 66 k libXpm-devel x86_64 3.5.17-5.el10 appstream 69 k libXrender x86_64 0.9.11-8.el10 appstream 27 k libXrender-devel x86_64 0.9.11-8.el10 appstream 19 k libXt x86_64 1.3.0-5.el10 appstream 179 k libblkid-devel x86_64 2.40.2-10.el10 appstream 27 k libcom_err-devel x86_64 1.47.1-3.el10 appstream 16 k libffi-devel x86_64 3.4.4-9.el10 appstream 28 k libicu x86_64 74.2-5.el10_0 baseos 10 M libicu-devel x86_64 74.2-5.el10_0 appstream 854 k libidn x86_64 1.42-4.el10_0 epel 198 k libjpeg-turbo x86_64 3.0.2-4.el10 appstream 253 k libjpeg-turbo-devel x86_64 3.0.2-4.el10 appstream 102 k liblerc x86_64 4.0.0-8.el10 appstream 215 k libmount-devel x86_64 2.40.2-10.el10 appstream 28 k libmpc x86_64 1.3.1-7.el10 appstream 71 k libpng-devel x86_64 2:1.6.40-8.el10 appstream 295 k libselinux-devel x86_64 3.8-2.el10_0 appstream 115 k libsepol-devel x86_64 3.8-1.el10 appstream 52 k libstdc++-devel x86_64 14.2.1-7.el10.alma.1 appstream 2.8 M libtiff x86_64 4.6.0-6.el10_0 appstream 212 k libtiff-devel x86_64 4.6.0-6.el10_0 appstream 262 k libtool-ltdl x86_64 2.4.7-13.el10 appstream 36 k libwebp x86_64 1.3.2-8.el10 appstream 288 k libwebp-devel x86_64 1.3.2-8.el10 appstream 43 k libxcb x86_64 1.17.0-3.el10 appstream 238 k libxcb-devel x86_64 1.17.0-3.el10 appstream 1.6 M libxcrypt-devel x86_64 4.4.36-10.el10 appstream 33 k libxml2-devel x86_64 2.12.5-9.el10_0 appstream 495 k libzstd-devel x86_64 1.5.5-9.el10 appstream 51 k m4 x86_64 1.4.19-11.el10 appstream 309 k pcre2-devel x86_64 10.44-1.el10.3 appstream 535 k pcre2-utf16 x86_64 10.44-1.el10.3 appstream 224 k pcre2-utf32 x86_64 10.44-1.el10.3 appstream 212 k perl-AutoLoader noarch 5.74-512.2.el10_0 appstream 21 k perl-B x86_64 1.89-512.2.el10_0 appstream 176 k perl-Carp noarch 1.54-511.el10 appstream 29 k perl-Class-Struct noarch 0.68-512.2.el10_0 appstream 22 k perl-Data-Dumper x86_64 2.189-512.el10 appstream 56 k perl-Digest noarch 1.20-511.el10 appstream 25 k perl-Digest-MD5 x86_64 2.59-6.el10 appstream 36 k perl-DynaLoader x86_64 1.56-512.2.el10_0 appstream 26 k perl-Encode x86_64 4:3.21-511.el10 appstream 1.1 M perl-Errno x86_64 1.38-512.2.el10_0 appstream 15 k perl-Exporter noarch 5.78-511.el10 appstream 31 k perl-Fcntl x86_64 1.18-512.2.el10_0 appstream 29 k perl-File-Basename noarch 2.86-512.2.el10_0 appstream 17 k perl-File-Compare noarch 1.100.800-512.2.el10_0 appstream 13 k perl-File-Copy noarch 2.41-512.2.el10_0 appstream 20 k perl-File-Find noarch 1.44-512.2.el10_0 appstream 25 k perl-File-Path noarch 2.18-511.el10 appstream 35 k perl-File-Temp noarch 1:0.231.100-512.el10 appstream 59 k perl-File-stat noarch 1.14-512.2.el10_0 appstream 17 k perl-FileHandle noarch 2.05-512.2.el10_0 appstream 15 k perl-Getopt-Long noarch 1:2.58-3.el10 appstream 67 k perl-Getopt-Std noarch 1.14-512.2.el10_0 appstream 15 k perl-HTTP-Tiny noarch 0.088-512.el10 appstream 56 k perl-IO x86_64 1.55-512.2.el10_0 appstream 77 k perl-IO-Socket-IP noarch 0.42-512.el10 appstream 42 k perl-IO-Socket-SSL noarch 2.085-3.el10 appstream 229 k perl-IPC-Open3 noarch 1.22-512.2.el10_0 appstream 21 k perl-MIME-Base64 x86_64 3.16-511.el10 appstream 30 k perl-Mozilla-CA noarch 20231213-5.el10 appstream 14 k perl-Net-SSLeay x86_64 1.94-7.el10 appstream 382 k perl-POSIX x86_64 2.20-512.2.el10_0 appstream 96 k perl-PathTools x86_64 3.91-512.el10 appstream 88 k perl-Pod-Escapes noarch 1:1.07-511.el10 appstream 20 k perl-Pod-Perldoc noarch 3.28.01-512.el10 appstream 88 k perl-Pod-Simple noarch 1:3.45-511.el10 appstream 222 k perl-Pod-Usage noarch 4:2.03-511.el10 appstream 40 k perl-Scalar-List-Utils x86_64 5:1.63-511.el10 appstream 72 k perl-SelectSaver noarch 1.02-512.2.el10_0 appstream 11 k perl-Socket x86_64 4:2.038-511.el10 appstream 54 k perl-Storable x86_64 1:3.32-511.el10 appstream 98 k perl-Symbol noarch 1.09-512.2.el10_0 appstream 14 k perl-Term-ANSIColor noarch 5.01-512.el10 appstream 48 k perl-Term-Cap noarch 1.18-511.el10 appstream 22 k perl-Text-ParseWords noarch 3.31-511.el10 appstream 16 k perl-Text-Tabs+Wrap noarch 2024.001-511.el10 appstream 22 k perl-Thread-Queue noarch 3.14-511.el10 appstream 21 k perl-Time-Local noarch 2:1.350-511.el10 appstream 34 k perl-URI noarch 5.27-3.el10 appstream 137 k perl-base noarch 2.27-512.2.el10_0 appstream 16 k perl-constant noarch 1.33-512.el10 appstream 23 k perl-if noarch 0.61.000-512.2.el10_0 appstream 14 k perl-interpreter x86_64 4:5.40.2-512.2.el10_0 appstream 72 k perl-libnet noarch 3.15-512.el10 appstream 130 k perl-libs x86_64 4:5.40.2-512.2.el10_0 appstream 2.2 M perl-locale noarch 1.12-512.2.el10_0 appstream 13 k perl-mro x86_64 1.29-512.2.el10_0 appstream 30 k perl-overload noarch 1.37-512.2.el10_0 appstream 45 k perl-overloading noarch 0.02-512.2.el10_0 appstream 13 k perl-parent noarch 1:0.241-512.el10 appstream 15 k perl-podlators noarch 1:5.01-511.el10 appstream 127 k perl-threads x86_64 1:2.40-511.el10 appstream 58 k perl-threads-shared x86_64 1.69-511.el10 appstream 44 k perl-vars noarch 1.05-512.2.el10_0 appstream 13 k pixman x86_64 0.43.4-2.el10 appstream 285 k pixman-devel x86_64 0.43.4-2.el10 appstream 17 k python3-packaging noarch 24.2-2.el10 baseos 155 k sysprof-capture-devel x86_64 47.2-1.el10 appstream 59 k tar x86_64 2:1.35-7.el10 baseos 866 k xml-common noarch 0.6.3-65.el10 appstream 31 k xorg-x11-proto-devel noarch 2024.1-3.el10 appstream 314 k xz-devel x86_64 1:5.6.2-4.el10_0 appstream 67 k Installing weak dependencies: perl-NDBM_File x86_64 1.17-512.2.el10_0 appstream 22 k Transaction Summary ================================================================================ Install 161 Packages Total download size: 124 M Installed size: 405 M Downloading Packages: (1/161): brotli-1.1.0-6.el10.x86_64.rpm 7.8 MB/s | 20 kB 00:00 (2/161): bzip2-devel-1.0.8-25.el10.x86_64.rpm 60 MB/s | 214 kB 00:00 (3/161): autoconf-2.71-12.el10.noarch.rpm 78 MB/s | 738 kB 00:00 (4/161): automake-1.16.5-20.el10.noarch.rpm 63 MB/s | 705 kB 00:00 (5/161): cairo-1.18.2-2.el10.x86_64.rpm 98 MB/s | 713 kB 00:00 (6/161): cmake-data-3.30.5-3.el10_0.noarch.rpm 213 MB/s | 1.8 MB 00:00 (7/161): brotli-devel-1.1.0-6.el10.x86_64.rpm 1.4 MB/s | 34 kB 00:00 (8/161): cmake-filesystem-3.30.5-3.el10_0.x86_6 8.6 MB/s | 15 kB 00:00 (9/161): cyrus-sasl-devel-2.1.28-27.el10.x86_64 69 MB/s | 116 kB 00:00 (10/161): e2fsprogs-devel-1.47.1-3.el10.x86_64. 43 MB/s | 66 kB 00:00 (11/161): emacs-filesystem-29.4-10.el10_0.noarc 6.4 MB/s | 8.9 kB 00:00 (12/161): cairo-devel-1.18.2-2.el10.x86_64.rpm 9.0 MB/s | 199 kB 00:00 (13/161): fontconfig-2.15.0-7.el10.x86_64.rpm 69 MB/s | 273 kB 00:00 (14/161): fontconfig-devel-2.15.0-7.el10.x86_64 46 MB/s | 179 kB 00:00 (15/161): freetype-devel-2.13.2-8.el10.x86_64.r 113 MB/s | 966 kB 00:00 (16/161): cmake-3.30.5-3.el10_0.x86_64.rpm 163 MB/s | 12 MB 00:00 (17/161): gd-2.3.3-20.el10_0.x86_64.rpm 73 MB/s | 133 kB 00:00 (18/161): gd-devel-2.3.3-20.el10_0.x86_64.rpm 27 MB/s | 40 kB 00:00 (19/161): gcc-c++-14.2.1-7.el10.alma.1.x86_64.r 167 MB/s | 15 MB 00:00 (20/161): glibc-devel-2.39-46.el10_0.alma.1.x86 116 MB/s | 494 kB 00:00 (21/161): glib2-devel-2.80.4-4.el10_0.6.x86_64. 27 MB/s | 1.4 MB 00:00 (22/161): gmp-c++-6.2.1-10.el10.x86_64.rpm 3.5 MB/s | 17 kB 00:00 (23/161): graphite2-devel-1.3.14-17.el10.x86_64 13 MB/s | 21 kB 00:00 (24/161): gmp-devel-6.2.1-10.el10.x86_64.rpm 40 MB/s | 173 kB 00:00 (25/161): harfbuzz-cairo-8.4.0-6.el10.x86_64.rp 11 MB/s | 29 kB 00:00 (26/161): harfbuzz-icu-8.4.0-6.el10.x86_64.rpm 7.5 MB/s | 15 kB 00:00 (27/161): harfbuzz-devel-8.4.0-6.el10.x86_64.rp 70 MB/s | 460 kB 00:00 (28/161): jbigkit-libs-2.1-31.el10.x86_64.rpm 18 MB/s | 53 kB 00:00 (29/161): libICE-1.1.1-5.el10.x86_64.rpm 38 MB/s | 75 kB 00:00 (30/161): libSM-1.2.4-5.el10.x86_64.rpm 28 MB/s | 43 kB 00:00 (31/161): libX11-1.8.10-1.el10.x86_64.rpm 131 MB/s | 652 kB 00:00 (32/161): kernel-headers-6.12.0-55.37.1.el10_0. 122 MB/s | 2.1 MB 00:00 (33/161): libX11-common-1.8.10-1.el10.noarch.rp 28 MB/s | 189 kB 00:00 (34/161): libX11-xcb-1.8.10-1.el10.x86_64.rpm 6.6 MB/s | 12 kB 00:00 (35/161): libXau-1.0.11-8.el10.x86_64.rpm 11 MB/s | 32 kB 00:00 (36/161): libX11-devel-1.8.10-1.el10.x86_64.rpm 102 MB/s | 1.1 MB 00:00 (37/161): libXau-devel-1.0.11-8.el10.x86_64.rpm 3.6 MB/s | 14 kB 00:00 (38/161): libXext-1.3.6-3.el10.x86_64.rpm 18 MB/s | 39 kB 00:00 (39/161): libXext-devel-1.3.6-3.el10.x86_64.rpm 39 MB/s | 91 kB 00:00 (40/161): libXpm-3.5.17-5.el10.x86_64.rpm 25 MB/s | 66 kB 00:00 (41/161): libXpm-devel-3.5.17-5.el10.x86_64.rpm 26 MB/s | 69 kB 00:00 (42/161): libXrender-0.9.11-8.el10.x86_64.rpm 12 MB/s | 27 kB 00:00 (43/161): libXrender-devel-0.9.11-8.el10.x86_64 9.0 MB/s | 19 kB 00:00 (44/161): libXt-1.3.0-5.el10.x86_64.rpm 62 MB/s | 179 kB 00:00 (45/161): libblkid-devel-2.40.2-10.el10.x86_64. 12 MB/s | 27 kB 00:00 (46/161): libcom_err-devel-1.47.1-3.el10.x86_64 13 MB/s | 16 kB 00:00 (47/161): libicu-devel-74.2-5.el10_0.x86_64.rpm 183 MB/s | 854 kB 00:00 (48/161): libjpeg-turbo-3.0.2-4.el10.x86_64.rpm 109 MB/s | 253 kB 00:00 (49/161): libffi-devel-3.4.4-9.el10.x86_64.rpm 2.3 MB/s | 28 kB 00:00 (50/161): liblerc-4.0.0-8.el10.x86_64.rpm 89 MB/s | 215 kB 00:00 (51/161): libmount-devel-2.40.2-10.el10.x86_64. 18 MB/s | 28 kB 00:00 (52/161): libmpc-1.3.1-7.el10.x86_64.rpm 41 MB/s | 71 kB 00:00 (53/161): libpng-devel-1.6.40-8.el10.x86_64.rpm 119 MB/s | 295 kB 00:00 (54/161): libselinux-devel-3.8-2.el10_0.x86_64. 73 MB/s | 115 kB 00:00 (55/161): libsepol-devel-3.8-1.el10.x86_64.rpm 40 MB/s | 52 kB 00:00 (56/161): libjpeg-turbo-devel-3.0.2-4.el10.x86_ 5.0 MB/s | 102 kB 00:00 (57/161): libtiff-4.6.0-6.el10_0.x86_64.rpm 81 MB/s | 212 kB 00:00 (58/161): libtiff-devel-4.6.0-6.el10_0.x86_64.r 102 MB/s | 262 kB 00:00 (59/161): cpp-14.2.1-7.el10.alma.1.x86_64.rpm 55 MB/s | 12 MB 00:00 (60/161): libstdc++-devel-14.2.1-7.el10.alma.1. 88 MB/s | 2.8 MB 00:00 (61/161): libtool-ltdl-2.4.7-13.el10.x86_64.rpm 5.6 MB/s | 36 kB 00:00 (62/161): libtool-2.4.7-13.el10.x86_64.rpm 24 MB/s | 602 kB 00:00 (63/161): libuuid-devel-2.40.2-10.el10.x86_64.r 12 MB/s | 39 kB 00:00 (64/161): libwebp-devel-1.3.2-8.el10.x86_64.rpm 33 MB/s | 43 kB 00:00 (65/161): libxcb-1.17.0-3.el10.x86_64.rpm 92 MB/s | 238 kB 00:00 (66/161): gcc-14.2.1-7.el10.alma.1.x86_64.rpm 138 MB/s | 37 MB 00:00 (67/161): libxcrypt-devel-4.4.36-10.el10.x86_64 724 kB/s | 33 kB 00:00 (68/161): libwebp-1.3.2-8.el10.x86_64.rpm 5.3 MB/s | 288 kB 00:00 (69/161): libzstd-devel-1.5.5-9.el10.x86_64.rpm 20 MB/s | 51 kB 00:00 (70/161): libxml2-devel-2.12.5-9.el10_0.x86_64. 100 MB/s | 495 kB 00:00 (71/161): libxcb-devel-1.17.0-3.el10.x86_64.rpm 28 MB/s | 1.6 MB 00:00 (72/161): m4-1.4.19-11.el10.x86_64.rpm 36 MB/s | 309 kB 00:00 (73/161): openldap-devel-2.6.8-3.el10.x86_64.rp 70 MB/s | 750 kB 00:00 (74/161): pcre2-devel-10.44-1.el10.3.x86_64.rpm 82 MB/s | 535 kB 00:00 (75/161): pcre2-utf32-10.44-1.el10.3.x86_64.rpm 65 MB/s | 212 kB 00:00 (76/161): perl-AutoLoader-5.74-512.2.el10_0.noa 10 MB/s | 21 kB 00:00 (77/161): perl-B-1.89-512.2.el10_0.x86_64.rpm 84 MB/s | 176 kB 00:00 (78/161): perl-Carp-1.54-511.el10.noarch.rpm 14 MB/s | 29 kB 00:00 (79/161): perl-Class-Struct-0.68-512.2.el10_0.n 14 MB/s | 22 kB 00:00 (80/161): perl-Data-Dumper-2.189-512.el10.x86_6 35 MB/s | 56 kB 00:00 (81/161): perl-Digest-1.20-511.el10.noarch.rpm 16 MB/s | 25 kB 00:00 (82/161): perl-Digest-MD5-2.59-6.el10.x86_64.rp 24 MB/s | 36 kB 00:00 (83/161): openssl-devel-3.2.2-16.el10_0.4.alma. 113 MB/s | 2.7 MB 00:00 (84/161): perl-DynaLoader-1.56-512.2.el10_0.x86 4.6 MB/s | 26 kB 00:00 (85/161): perl-Errno-1.38-512.2.el10_0.x86_64.r 11 MB/s | 15 kB 00:00 (86/161): perl-Exporter-5.78-511.el10.noarch.rp 17 MB/s | 31 kB 00:00 (87/161): pcre2-utf16-10.44-1.el10.3.x86_64.rpm 9.9 MB/s | 224 kB 00:00 (88/161): perl-Fcntl-1.18-512.2.el10_0.x86_64.r 15 MB/s | 29 kB 00:00 (89/161): perl-File-Basename-2.86-512.2.el10_0. 6.8 MB/s | 17 kB 00:00 (90/161): perl-Encode-3.21-511.el10.x86_64.rpm 85 MB/s | 1.1 MB 00:00 (91/161): perl-File-Copy-2.41-512.2.el10_0.noar 6.8 MB/s | 20 kB 00:00 (92/161): perl-File-Find-1.44-512.2.el10_0.noar 7.3 MB/s | 25 kB 00:00 (93/161): perl-File-Path-2.18-511.el10.noarch.r 18 MB/s | 35 kB 00:00 (94/161): perl-File-Temp-0.231.100-512.el10.noa 39 MB/s | 59 kB 00:00 (95/161): perl-File-stat-1.14-512.2.el10_0.noar 8.3 MB/s | 17 kB 00:00 (96/161): perl-File-Compare-1.100.800-512.2.el1 1.5 MB/s | 13 kB 00:00 (97/161): perl-FileHandle-2.05-512.2.el10_0.noa 5.5 MB/s | 15 kB 00:00 (98/161): perl-Getopt-Long-2.58-3.el10.noarch.r 29 MB/s | 67 kB 00:00 (99/161): perl-Getopt-Std-1.14-512.2.el10_0.noa 5.4 MB/s | 15 kB 00:00 (100/161): perl-HTTP-Tiny-0.088-512.el10.noarch 25 MB/s | 56 kB 00:00 (101/161): perl-IO-Socket-IP-0.42-512.el10.noar 25 MB/s | 42 kB 00:00 (102/161): perl-IO-Socket-SSL-2.085-3.el10.noar 84 MB/s | 229 kB 00:00 (103/161): perl-IPC-Open3-1.22-512.2.el10_0.noa 9.7 MB/s | 21 kB 00:00 (104/161): perl-MIME-Base64-3.16-511.el10.x86_6 13 MB/s | 30 kB 00:00 (105/161): perl-Mozilla-CA-20231213-5.el10.noar 9.7 MB/s | 14 kB 00:00 (106/161): perl-NDBM_File-1.17-512.2.el10_0.x86 12 MB/s | 22 kB 00:00 (107/161): perl-Net-SSLeay-1.94-7.el10.x86_64.r 128 MB/s | 382 kB 00:00 (108/161): perl-IO-1.55-512.2.el10_0.x86_64.rpm 7.6 MB/s | 77 kB 00:00 (109/161): perl-POSIX-2.20-512.2.el10_0.x86_64. 30 MB/s | 96 kB 00:00 (110/161): perl-PathTools-3.91-512.el10.x86_64. 24 MB/s | 88 kB 00:00 (111/161): perl-Pod-Escapes-1.07-511.el10.noarc 6.9 MB/s | 20 kB 00:00 (112/161): perl-Pod-Perldoc-3.28.01-512.el10.no 50 MB/s | 88 kB 00:00 (113/161): perl-Pod-Simple-3.45-511.el10.noarch 75 MB/s | 222 kB 00:00 (114/161): perl-Scalar-List-Utils-1.63-511.el10 29 MB/s | 72 kB 00:00 (115/161): perl-SelectSaver-1.02-512.2.el10_0.n 4.8 MB/s | 11 kB 00:00 (116/161): perl-Socket-2.038-511.el10.x86_64.rp 34 MB/s | 54 kB 00:00 (117/161): perl-Storable-3.32-511.el10.x86_64.r 45 MB/s | 98 kB 00:00 (118/161): perl-Symbol-1.09-512.2.el10_0.noarch 6.7 MB/s | 14 kB 00:00 (119/161): perl-Term-ANSIColor-5.01-512.el10.no 33 MB/s | 48 kB 00:00 (120/161): perl-Term-Cap-1.18-511.el10.noarch.r 11 MB/s | 22 kB 00:00 (121/161): perl-Text-ParseWords-3.31-511.el10.n 8.3 MB/s | 16 kB 00:00 (122/161): perl-Text-Tabs+Wrap-2024.001-511.el1 15 MB/s | 22 kB 00:00 (123/161): perl-Thread-Queue-3.14-511.el10.noar 11 MB/s | 21 kB 00:00 (124/161): perl-Time-Local-1.350-511.el10.noarc 17 MB/s | 34 kB 00:00 (125/161): perl-Pod-Usage-2.03-511.el10.noarch. 3.2 MB/s | 40 kB 00:00 (126/161): perl-URI-5.27-3.el10.noarch.rpm 55 MB/s | 137 kB 00:00 (127/161): perl-base-2.27-512.2.el10_0.noarch.r 5.3 MB/s | 16 kB 00:00 (128/161): perl-constant-1.33-512.el10.noarch.r 7.8 MB/s | 23 kB 00:00 (129/161): perl-if-0.61.000-512.2.el10_0.noarch 9.0 MB/s | 14 kB 00:00 (130/161): perl-interpreter-5.40.2-512.2.el10_0 32 MB/s | 72 kB 00:00 (131/161): perl-locale-1.12-512.2.el10_0.noarch 9.8 MB/s | 13 kB 00:00 (132/161): perl-mro-1.29-512.2.el10_0.x86_64.rp 16 MB/s | 30 kB 00:00 (133/161): perl-overload-1.37-512.2.el10_0.noar 41 MB/s | 45 kB 00:00 (134/161): perl-overloading-0.02-512.2.el10_0.n 8.0 MB/s | 13 kB 00:00 (135/161): perl-parent-0.241-512.el10.noarch.rp 11 MB/s | 15 kB 00:00 (136/161): perl-podlators-5.01-511.el10.noarch. 66 MB/s | 127 kB 00:00 (137/161): perl-libs-5.40.2-512.2.el10_0.x86_64 187 MB/s | 2.2 MB 00:00 (138/161): perl-threads-2.40-511.el10.x86_64.rp 12 MB/s | 58 kB 00:00 (139/161): perl-threads-shared-1.69-511.el10.x8 8.4 MB/s | 44 kB 00:00 (140/161): perl-vars-1.05-512.2.el10_0.noarch.r 5.8 MB/s | 13 kB 00:00 (141/161): pixman-0.43.4-2.el10.x86_64.rpm 140 MB/s | 285 kB 00:00 (142/161): sysprof-capture-devel-47.2-1.el10.x8 31 MB/s | 59 kB 00:00 (143/161): xml-common-0.6.3-65.el10.noarch.rpm 21 MB/s | 31 kB 00:00 (144/161): xorg-x11-proto-devel-2024.1-3.el10.n 133 MB/s | 314 kB 00:00 (145/161): xz-devel-5.6.2-4.el10_0.x86_64.rpm 27 MB/s | 67 kB 00:00 (146/161): perl-libnet-3.15-512.el10.noarch.rpm 5.7 MB/s | 130 kB 00:00 (147/161): zlib-ng-compat-devel-2.2.3-1.el10.x8 16 MB/s | 38 kB 00:00 (148/161): bluez-libs-5.77-6.el10.x86_64.rpm 32 MB/s | 80 kB 00:00 (149/161): cyrus-sasl-2.1.28-27.el10.x86_64.rpm 32 MB/s | 71 kB 00:00 (150/161): gettext-0.22.5-6.el10.x86_64.rpm 159 MB/s | 1.1 MB 00:00 (151/161): pixman-devel-0.43.4-2.el10.x86_64.rp 1.0 MB/s | 17 kB 00:00 (152/161): net-tools-2.0-0.73.20160912git.el10. 104 MB/s | 302 kB 00:00 (153/161): make-4.4.1-9.el10.x86_64.rpm 62 MB/s | 589 kB 00:00 (154/161): yum-utils-4.7.0-8.el10.noarch.rpm 36 MB/s | 38 kB 00:00 (155/161): tar-1.35-7.el10.x86_64.rpm 140 MB/s | 866 kB 00:00 (156/161): bluez-libs-devel-5.77-6.el10.x86_64. 63 MB/s | 258 kB 00:00 (157/161): libtool-ltdl-devel-2.4.7-13.el10.x86 72 MB/s | 166 kB 00:00 (158/161): python3-packaging-24.2-2.el10.noarch 7.5 MB/s | 155 kB 00:00 (159/161): libicu-74.2-5.el10_0.x86_64.rpm 217 MB/s | 10 MB 00:00 (160/161): libidn-devel-1.42-4.el10_0.x86_64.rp 2.3 MB/s | 86 kB 00:00 (161/161): libidn-1.42-4.el10_0.x86_64.rpm 5.0 MB/s | 198 kB 00:00 -------------------------------------------------------------------------------- Total 140 MB/s | 124 MB 00:00 Extra Packages for Enterprise Linux 10 - x86_64 1.6 MB/s | 1.6 kB 00:00 Importing GPG key 0xE37ED158: Userid : "Fedora (epel10) " Fingerprint: 7D8D 15CB FC4E 6268 8591 FB26 33D9 8517 E37E D158 From : /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-10 Key imported successfully Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : cmake-filesystem-3.30.5-3.el10_0.x86_64 1/161 Installing : zlib-ng-compat-devel-2.2.3-1.el10.x86_64 2/161 Installing : xorg-x11-proto-devel-2024.1-3.el10.noarch 3/161 Installing : libpng-devel-2:1.6.40-8.el10.x86_64 4/161 Installing : libwebp-1.3.2-8.el10.x86_64 5/161 Installing : libmpc-1.3.1-7.el10.x86_64 6/161 Installing : libjpeg-turbo-3.0.2-4.el10.x86_64 7/161 Installing : emacs-filesystem-1:29.4-10.el10_0.noarch 8/161 Installing : libjpeg-turbo-devel-3.0.2-4.el10.x86_64 9/161 Installing : libwebp-devel-1.3.2-8.el10.x86_64 10/161 Installing : make-1:4.4.1-9.el10.x86_64 11/161 Installing : libicu-74.2-5.el10_0.x86_64 12/161 Installing : pixman-0.43.4-2.el10.x86_64 13/161 Installing : libXau-1.0.11-8.el10.x86_64 14/161 Installing : libxcb-1.17.0-3.el10.x86_64 15/161 Installing : libICE-1.1.1-5.el10.x86_64 16/161 Installing : libSM-1.2.4-5.el10.x86_64 17/161 Installing : libXau-devel-1.0.11-8.el10.x86_64 18/161 Installing : libxcb-devel-1.17.0-3.el10.x86_64 19/161 Installing : pixman-devel-0.43.4-2.el10.x86_64 20/161 Installing : harfbuzz-icu-8.4.0-6.el10.x86_64 21/161 Installing : libicu-devel-74.2-5.el10_0.x86_64 22/161 Installing : cmake-data-3.30.5-3.el10_0.noarch 23/161 Installing : cmake-3.30.5-3.el10_0.x86_64 24/161 Installing : libidn-1.42-4.el10_0.x86_64 25/161 Installing : cpp-14.2.1-7.el10.alma.1.x86_64 26/161 Installing : perl-Digest-1.20-511.el10.noarch 27/161 Installing : perl-Digest-MD5-2.59-6.el10.x86_64 28/161 Installing : perl-B-1.89-512.2.el10_0.x86_64 29/161 Installing : perl-FileHandle-2.05-512.2.el10_0.noarch 30/161 Installing : perl-Data-Dumper-2.189-512.el10.x86_64 31/161 Installing : perl-libnet-3.15-512.el10.noarch 32/161 Installing : perl-URI-5.27-3.el10.noarch 33/161 Installing : perl-AutoLoader-5.74-512.2.el10_0.noarch 34/161 Installing : perl-Text-Tabs+Wrap-2024.001-511.el10.noarch 35/161 Installing : perl-Mozilla-CA-20231213-5.el10.noarch 36/161 Installing : perl-if-0.61.000-512.2.el10_0.noarch 37/161 Installing : perl-locale-1.12-512.2.el10_0.noarch 38/161 Installing : perl-IO-Socket-IP-0.42-512.el10.noarch 39/161 Installing : perl-Time-Local-2:1.350-511.el10.noarch 40/161 Installing : perl-File-Path-2.18-511.el10.noarch 41/161 Installing : perl-Pod-Escapes-1:1.07-511.el10.noarch 42/161 Installing : perl-IO-Socket-SSL-2.085-3.el10.noarch 43/161 Installing : perl-Net-SSLeay-1.94-7.el10.x86_64 44/161 Installing : perl-Class-Struct-0.68-512.2.el10_0.noarch 45/161 Installing : perl-Term-ANSIColor-5.01-512.el10.noarch 46/161 Installing : perl-POSIX-2.20-512.2.el10_0.x86_64 47/161 Installing : perl-IPC-Open3-1.22-512.2.el10_0.noarch 48/161 Installing : perl-File-Temp-1:0.231.100-512.el10.noarch 49/161 Installing : perl-Term-Cap-1.18-511.el10.noarch 50/161 Installing : perl-Pod-Simple-1:3.45-511.el10.noarch 51/161 Installing : perl-HTTP-Tiny-0.088-512.el10.noarch 52/161 Installing : perl-Socket-4:2.038-511.el10.x86_64 53/161 Installing : perl-SelectSaver-1.02-512.2.el10_0.noarch 54/161 Installing : perl-Symbol-1.09-512.2.el10_0.noarch 55/161 Installing : perl-File-stat-1.14-512.2.el10_0.noarch 56/161 Installing : perl-podlators-1:5.01-511.el10.noarch 57/161 Installing : perl-Pod-Perldoc-3.28.01-512.el10.noarch 58/161 Installing : perl-Fcntl-1.18-512.2.el10_0.x86_64 59/161 Installing : perl-Text-ParseWords-3.31-511.el10.noarch 60/161 Installing : perl-base-2.27-512.2.el10_0.noarch 61/161 Installing : perl-mro-1.29-512.2.el10_0.x86_64 62/161 Installing : perl-IO-1.55-512.2.el10_0.x86_64 63/161 Installing : perl-overloading-0.02-512.2.el10_0.noarch 64/161 Installing : perl-Pod-Usage-4:2.03-511.el10.noarch 65/161 Installing : perl-Errno-1.38-512.2.el10_0.x86_64 66/161 Installing : perl-File-Basename-2.86-512.2.el10_0.noarch 67/161 Installing : perl-Getopt-Std-1.14-512.2.el10_0.noarch 68/161 Installing : perl-MIME-Base64-3.16-511.el10.x86_64 69/161 Installing : perl-Scalar-List-Utils-5:1.63-511.el10.x86_64 70/161 Installing : perl-constant-1.33-512.el10.noarch 71/161 Installing : perl-Storable-1:3.32-511.el10.x86_64 72/161 Installing : perl-overload-1.37-512.2.el10_0.noarch 73/161 Installing : perl-parent-1:0.241-512.el10.noarch 74/161 Installing : perl-vars-1.05-512.2.el10_0.noarch 75/161 Installing : perl-Getopt-Long-1:2.58-3.el10.noarch 76/161 Installing : perl-Carp-1.54-511.el10.noarch 77/161 Installing : perl-Exporter-5.78-511.el10.noarch 78/161 Installing : perl-NDBM_File-1.17-512.2.el10_0.x86_64 79/161 Installing : perl-PathTools-3.91-512.el10.x86_64 80/161 Installing : perl-DynaLoader-1.56-512.2.el10_0.x86_64 81/161 Installing : perl-Encode-4:3.21-511.el10.x86_64 82/161 Installing : perl-libs-4:5.40.2-512.2.el10_0.x86_64 83/161 Installing : perl-interpreter-4:5.40.2-512.2.el10_0.x86_64 84/161 Installing : perl-threads-1:2.40-511.el10.x86_64 85/161 Installing : perl-threads-shared-1.69-511.el10.x86_64 86/161 Installing : perl-Thread-Queue-3.14-511.el10.noarch 87/161 Installing : perl-File-Compare-1.100.800-512.2.el10_0.noarch 88/161 Installing : perl-File-Copy-2.41-512.2.el10_0.noarch 89/161 Installing : perl-File-Find-1.44-512.2.el10_0.noarch 90/161 Installing : tar-2:1.35-7.el10.x86_64 91/161 Installing : python3-packaging-24.2-2.el10.noarch 92/161 Installing : gettext-0.22.5-6.el10.x86_64 93/161 Running scriptlet: cyrus-sasl-2.1.28-27.el10.x86_64 94/161 Installing : cyrus-sasl-2.1.28-27.el10.x86_64 94/161 Running scriptlet: cyrus-sasl-2.1.28-27.el10.x86_64 94/161 Installing : cyrus-sasl-devel-2.1.28-27.el10.x86_64 95/161 Installing : bluez-libs-5.77-6.el10.x86_64 96/161 Installing : xz-devel-1:5.6.2-4.el10_0.x86_64 97/161 Installing : libxml2-devel-2.12.5-9.el10_0.x86_64 98/161 Running scriptlet: xml-common-0.6.3-65.el10.noarch 99/161 Installing : xml-common-0.6.3-65.el10.noarch 99/161 Installing : fontconfig-2.15.0-7.el10.x86_64 100/161 Running scriptlet: fontconfig-2.15.0-7.el10.x86_64 100/161 Installing : sysprof-capture-devel-47.2-1.el10.x86_64 101/161 Installing : pcre2-utf32-10.44-1.el10.3.x86_64 102/161 Installing : pcre2-utf16-10.44-1.el10.3.x86_64 103/161 Installing : pcre2-devel-10.44-1.el10.3.x86_64 104/161 Installing : m4-1.4.19-11.el10.x86_64 105/161 Installing : autoconf-2.71-12.el10.noarch 106/161 Installing : automake-1.16.5-20.el10.noarch 107/161 Installing : libzstd-devel-1.5.5-9.el10.x86_64 108/161 Installing : libtool-ltdl-2.4.7-13.el10.x86_64 109/161 Installing : libstdc++-devel-14.2.1-7.el10.alma.1.x86_64 110/161 Installing : libsepol-devel-3.8-1.el10.x86_64 111/161 Installing : libselinux-devel-3.8-2.el10_0.x86_64 112/161 Installing : liblerc-4.0.0-8.el10.x86_64 113/161 Installing : libffi-devel-3.4.4-9.el10.x86_64 114/161 Installing : libcom_err-devel-1.47.1-3.el10.x86_64 115/161 Installing : libblkid-devel-2.40.2-10.el10.x86_64 116/161 Installing : libmount-devel-2.40.2-10.el10.x86_64 117/161 Installing : glib2-devel-2.80.4-4.el10_0.6.x86_64 118/161 Installing : libX11-xcb-1.8.10-1.el10.x86_64 119/161 Installing : libX11-common-1.8.10-1.el10.noarch 120/161 Installing : libX11-1.8.10-1.el10.x86_64 121/161 Installing : libX11-devel-1.8.10-1.el10.x86_64 122/161 Installing : libXext-1.3.6-3.el10.x86_64 123/161 Installing : libXpm-3.5.17-5.el10.x86_64 124/161 Installing : libXrender-0.9.11-8.el10.x86_64 125/161 Installing : cairo-1.18.2-2.el10.x86_64 126/161 Installing : harfbuzz-cairo-8.4.0-6.el10.x86_64 127/161 Installing : libXrender-devel-0.9.11-8.el10.x86_64 128/161 Installing : libXext-devel-1.3.6-3.el10.x86_64 129/161 Installing : libXt-1.3.0-5.el10.x86_64 130/161 Installing : libXpm-devel-3.5.17-5.el10.x86_64 131/161 Installing : kernel-headers-6.12.0-55.37.1.el10_0.x86_64 132/161 Installing : libxcrypt-devel-4.4.36-10.el10.x86_64 133/161 Installing : glibc-devel-2.39-46.el10_0.alma.1.x86_64 134/161 Installing : gcc-14.2.1-7.el10.alma.1.x86_64 135/161 Installing : jbigkit-libs-2.1-31.el10.x86_64 136/161 Installing : libtiff-4.6.0-6.el10_0.x86_64 137/161 Installing : gd-2.3.3-20.el10_0.x86_64 138/161 Installing : libtiff-devel-4.6.0-6.el10_0.x86_64 139/161 Installing : graphite2-devel-1.3.14-17.el10.x86_64 140/161 Installing : gmp-c++-1:6.2.1-10.el10.x86_64 141/161 Installing : bzip2-devel-1.0.8-25.el10.x86_64 142/161 Installing : brotli-1.1.0-6.el10.x86_64 143/161 Installing : brotli-devel-1.1.0-6.el10.x86_64 144/161 Installing : cairo-devel-1.18.2-2.el10.x86_64 145/161 Installing : fontconfig-devel-2.15.0-7.el10.x86_64 146/161 Installing : harfbuzz-devel-8.4.0-6.el10.x86_64 147/161 Installing : freetype-devel-2.13.2-8.el10.x86_64 148/161 Installing : gd-devel-2.3.3-20.el10_0.x86_64 149/161 Installing : gmp-devel-1:6.2.1-10.el10.x86_64 150/161 Installing : gcc-c++-14.2.1-7.el10.alma.1.x86_64 151/161 Installing : libtool-2.4.7-13.el10.x86_64 152/161 Installing : e2fsprogs-devel-1.47.1-3.el10.x86_64 153/161 Installing : libtool-ltdl-devel-2.4.7-13.el10.x86_64 154/161 Installing : bluez-libs-devel-5.77-6.el10.x86_64 155/161 Installing : openldap-devel-2.6.8-3.el10.x86_64 156/161 Installing : libidn-devel-1.42-4.el10_0.x86_64 157/161 Installing : yum-utils-4.7.0-8.el10.noarch 158/161 Installing : net-tools-2.0-0.73.20160912git.el10.x86_64 159/161 Running scriptlet: net-tools-2.0-0.73.20160912git.el10.x86_64 159/161 Installing : openssl-devel-1:3.2.2-16.el10_0.4.alma.1.x86_64 160/161 Installing : libuuid-devel-2.40.2-10.el10.x86_64 161/161 Running scriptlet: fontconfig-2.15.0-7.el10.x86_64 161/161 Running scriptlet: libuuid-devel-2.40.2-10.el10.x86_64 161/161 Installed: autoconf-2.71-12.el10.noarch automake-1.16.5-20.el10.noarch bluez-libs-5.77-6.el10.x86_64 bluez-libs-devel-5.77-6.el10.x86_64 brotli-1.1.0-6.el10.x86_64 brotli-devel-1.1.0-6.el10.x86_64 bzip2-devel-1.0.8-25.el10.x86_64 cairo-1.18.2-2.el10.x86_64 cairo-devel-1.18.2-2.el10.x86_64 cmake-3.30.5-3.el10_0.x86_64 cmake-data-3.30.5-3.el10_0.noarch cmake-filesystem-3.30.5-3.el10_0.x86_64 cpp-14.2.1-7.el10.alma.1.x86_64 cyrus-sasl-2.1.28-27.el10.x86_64 cyrus-sasl-devel-2.1.28-27.el10.x86_64 e2fsprogs-devel-1.47.1-3.el10.x86_64 emacs-filesystem-1:29.4-10.el10_0.noarch fontconfig-2.15.0-7.el10.x86_64 fontconfig-devel-2.15.0-7.el10.x86_64 freetype-devel-2.13.2-8.el10.x86_64 gcc-14.2.1-7.el10.alma.1.x86_64 gcc-c++-14.2.1-7.el10.alma.1.x86_64 gd-2.3.3-20.el10_0.x86_64 gd-devel-2.3.3-20.el10_0.x86_64 gettext-0.22.5-6.el10.x86_64 glib2-devel-2.80.4-4.el10_0.6.x86_64 glibc-devel-2.39-46.el10_0.alma.1.x86_64 gmp-c++-1:6.2.1-10.el10.x86_64 gmp-devel-1:6.2.1-10.el10.x86_64 graphite2-devel-1.3.14-17.el10.x86_64 harfbuzz-cairo-8.4.0-6.el10.x86_64 harfbuzz-devel-8.4.0-6.el10.x86_64 harfbuzz-icu-8.4.0-6.el10.x86_64 jbigkit-libs-2.1-31.el10.x86_64 kernel-headers-6.12.0-55.37.1.el10_0.x86_64 libICE-1.1.1-5.el10.x86_64 libSM-1.2.4-5.el10.x86_64 libX11-1.8.10-1.el10.x86_64 libX11-common-1.8.10-1.el10.noarch libX11-devel-1.8.10-1.el10.x86_64 libX11-xcb-1.8.10-1.el10.x86_64 libXau-1.0.11-8.el10.x86_64 libXau-devel-1.0.11-8.el10.x86_64 libXext-1.3.6-3.el10.x86_64 libXext-devel-1.3.6-3.el10.x86_64 libXpm-3.5.17-5.el10.x86_64 libXpm-devel-3.5.17-5.el10.x86_64 libXrender-0.9.11-8.el10.x86_64 libXrender-devel-0.9.11-8.el10.x86_64 libXt-1.3.0-5.el10.x86_64 libblkid-devel-2.40.2-10.el10.x86_64 libcom_err-devel-1.47.1-3.el10.x86_64 libffi-devel-3.4.4-9.el10.x86_64 libicu-74.2-5.el10_0.x86_64 libicu-devel-74.2-5.el10_0.x86_64 libidn-1.42-4.el10_0.x86_64 libidn-devel-1.42-4.el10_0.x86_64 libjpeg-turbo-3.0.2-4.el10.x86_64 libjpeg-turbo-devel-3.0.2-4.el10.x86_64 liblerc-4.0.0-8.el10.x86_64 libmount-devel-2.40.2-10.el10.x86_64 libmpc-1.3.1-7.el10.x86_64 libpng-devel-2:1.6.40-8.el10.x86_64 libselinux-devel-3.8-2.el10_0.x86_64 libsepol-devel-3.8-1.el10.x86_64 libstdc++-devel-14.2.1-7.el10.alma.1.x86_64 libtiff-4.6.0-6.el10_0.x86_64 libtiff-devel-4.6.0-6.el10_0.x86_64 libtool-2.4.7-13.el10.x86_64 libtool-ltdl-2.4.7-13.el10.x86_64 libtool-ltdl-devel-2.4.7-13.el10.x86_64 libuuid-devel-2.40.2-10.el10.x86_64 libwebp-1.3.2-8.el10.x86_64 libwebp-devel-1.3.2-8.el10.x86_64 libxcb-1.17.0-3.el10.x86_64 libxcb-devel-1.17.0-3.el10.x86_64 libxcrypt-devel-4.4.36-10.el10.x86_64 libxml2-devel-2.12.5-9.el10_0.x86_64 libzstd-devel-1.5.5-9.el10.x86_64 m4-1.4.19-11.el10.x86_64 make-1:4.4.1-9.el10.x86_64 net-tools-2.0-0.73.20160912git.el10.x86_64 openldap-devel-2.6.8-3.el10.x86_64 openssl-devel-1:3.2.2-16.el10_0.4.alma.1.x86_64 pcre2-devel-10.44-1.el10.3.x86_64 pcre2-utf16-10.44-1.el10.3.x86_64 pcre2-utf32-10.44-1.el10.3.x86_64 perl-AutoLoader-5.74-512.2.el10_0.noarch perl-B-1.89-512.2.el10_0.x86_64 perl-Carp-1.54-511.el10.noarch perl-Class-Struct-0.68-512.2.el10_0.noarch perl-Data-Dumper-2.189-512.el10.x86_64 perl-Digest-1.20-511.el10.noarch perl-Digest-MD5-2.59-6.el10.x86_64 perl-DynaLoader-1.56-512.2.el10_0.x86_64 perl-Encode-4:3.21-511.el10.x86_64 perl-Errno-1.38-512.2.el10_0.x86_64 perl-Exporter-5.78-511.el10.noarch perl-Fcntl-1.18-512.2.el10_0.x86_64 perl-File-Basename-2.86-512.2.el10_0.noarch perl-File-Compare-1.100.800-512.2.el10_0.noarch perl-File-Copy-2.41-512.2.el10_0.noarch perl-File-Find-1.44-512.2.el10_0.noarch perl-File-Path-2.18-511.el10.noarch perl-File-Temp-1:0.231.100-512.el10.noarch perl-File-stat-1.14-512.2.el10_0.noarch perl-FileHandle-2.05-512.2.el10_0.noarch perl-Getopt-Long-1:2.58-3.el10.noarch perl-Getopt-Std-1.14-512.2.el10_0.noarch perl-HTTP-Tiny-0.088-512.el10.noarch perl-IO-1.55-512.2.el10_0.x86_64 perl-IO-Socket-IP-0.42-512.el10.noarch perl-IO-Socket-SSL-2.085-3.el10.noarch perl-IPC-Open3-1.22-512.2.el10_0.noarch perl-MIME-Base64-3.16-511.el10.x86_64 perl-Mozilla-CA-20231213-5.el10.noarch perl-NDBM_File-1.17-512.2.el10_0.x86_64 perl-Net-SSLeay-1.94-7.el10.x86_64 perl-POSIX-2.20-512.2.el10_0.x86_64 perl-PathTools-3.91-512.el10.x86_64 perl-Pod-Escapes-1:1.07-511.el10.noarch perl-Pod-Perldoc-3.28.01-512.el10.noarch perl-Pod-Simple-1:3.45-511.el10.noarch perl-Pod-Usage-4:2.03-511.el10.noarch perl-Scalar-List-Utils-5:1.63-511.el10.x86_64 perl-SelectSaver-1.02-512.2.el10_0.noarch perl-Socket-4:2.038-511.el10.x86_64 perl-Storable-1:3.32-511.el10.x86_64 perl-Symbol-1.09-512.2.el10_0.noarch perl-Term-ANSIColor-5.01-512.el10.noarch perl-Term-Cap-1.18-511.el10.noarch perl-Text-ParseWords-3.31-511.el10.noarch perl-Text-Tabs+Wrap-2024.001-511.el10.noarch perl-Thread-Queue-3.14-511.el10.noarch perl-Time-Local-2:1.350-511.el10.noarch perl-URI-5.27-3.el10.noarch perl-base-2.27-512.2.el10_0.noarch perl-constant-1.33-512.el10.noarch perl-if-0.61.000-512.2.el10_0.noarch perl-interpreter-4:5.40.2-512.2.el10_0.x86_64 perl-libnet-3.15-512.el10.noarch perl-libs-4:5.40.2-512.2.el10_0.x86_64 perl-locale-1.12-512.2.el10_0.noarch perl-mro-1.29-512.2.el10_0.x86_64 perl-overload-1.37-512.2.el10_0.noarch perl-overloading-0.02-512.2.el10_0.noarch perl-parent-1:0.241-512.el10.noarch perl-podlators-1:5.01-511.el10.noarch perl-threads-1:2.40-511.el10.x86_64 perl-threads-shared-1.69-511.el10.x86_64 perl-vars-1.05-512.2.el10_0.noarch pixman-0.43.4-2.el10.x86_64 pixman-devel-0.43.4-2.el10.x86_64 python3-packaging-24.2-2.el10.noarch sysprof-capture-devel-47.2-1.el10.x86_64 tar-2:1.35-7.el10.x86_64 xml-common-0.6.3-65.el10.noarch xorg-x11-proto-devel-2024.1-3.el10.noarch xz-devel-1:5.6.2-4.el10_0.x86_64 yum-utils-4.7.0-8.el10.noarch zlib-ng-compat-devel-2.2.3-1.el10.x86_64 Complete! Last metadata expiration check: 0:00:11 ago on Sun 05 Oct 2025 06:02:50 PM UTC. Package libcurl-8.9.1-5.el10.x86_64 is already installed. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libcurl-devel x86_64 8.9.1-5.el10 appstream 912 k Installing dependencies: libidn2-devel x86_64 2.3.7-3.el10 appstream 74 k libnghttp2-devel x86_64 1.64.0-2.el10 appstream 56 k libpsl-devel x86_64 0.21.5-6.el10 appstream 38 k libssh-devel x86_64 0.11.1-1.el10 appstream 45 k publicsuffix-list noarch 20240107-5.el10 appstream 87 k Transaction Summary ================================================================================ Install 6 Packages Total download size: 1.2 M Installed size: 2.4 M Downloading Packages: (1/6): libidn2-devel-2.3.7-3.el10.x86_64.rpm 15 MB/s | 74 kB 00:00 (2/6): libnghttp2-devel-1.64.0-2.el10.x86_64.rp 8.4 MB/s | 56 kB 00:00 (3/6): libssh-devel-0.11.1-1.el10.x86_64.rpm 16 MB/s | 45 kB 00:00 (4/6): libcurl-devel-8.9.1-5.el10.x86_64.rpm 79 MB/s | 912 kB 00:00 (5/6): publicsuffix-list-20240107-5.el10.noarch 3.4 MB/s | 87 kB 00:00 (6/6): libpsl-devel-0.21.5-6.el10.x86_64.rpm 892 kB/s | 38 kB 00:00 -------------------------------------------------------------------------------- Total 7.1 MB/s | 1.2 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : publicsuffix-list-20240107-5.el10.noarch 1/6 Installing : libpsl-devel-0.21.5-6.el10.x86_64 2/6 Installing : libssh-devel-0.11.1-1.el10.x86_64 3/6 Installing : libnghttp2-devel-1.64.0-2.el10.x86_64 4/6 Installing : libidn2-devel-2.3.7-3.el10.x86_64 5/6 Installing : libcurl-devel-8.9.1-5.el10.x86_64 6/6 Running scriptlet: libcurl-devel-8.9.1-5.el10.x86_64 6/6 Installed: libcurl-devel-8.9.1-5.el10.x86_64 libidn2-devel-2.3.7-3.el10.x86_64 libnghttp2-devel-1.64.0-2.el10.x86_64 libpsl-devel-0.21.5-6.el10.x86_64 libssh-devel-0.11.1-1.el10.x86_64 publicsuffix-list-20240107-5.el10.noarch Complete! Last metadata expiration check: 0:00:13 ago on Sun 05 Oct 2025 06:02:50 PM UTC. Package bzip2 available, but not installed. No match for argument: bzip2 Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Reinstalling: bzip2-devel x86_64 1.0.8-25.el10 appstream 214 k Transaction Summary ================================================================================ Total download size: 214 k Installed size: 310 k Downloading Packages: bzip2-devel-1.0.8-25.el10.x86_64.rpm 64 MB/s | 214 kB 00:00 -------------------------------------------------------------------------------- Total 10 MB/s | 214 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Reinstalling : bzip2-devel-1.0.8-25.el10.x86_64 1/2 Cleanup : bzip2-devel-1.0.8-25.el10.x86_64 2/2 Running scriptlet: bzip2-devel-1.0.8-25.el10.x86_64 2/2 Reinstalled: bzip2-devel-1.0.8-25.el10.x86_64 Complete! Last metadata expiration check: 0:00:13 ago on Sun 05 Oct 2025 06:02:50 PM UTC. Dependencies resolved. ======================================================================================== Package Arch Version Repo Size ======================================================================================== Installing group/module packages: asciidoc noarch 10.2.0-12.el10 appstream 428 k bison x86_64 3.8.2-9.el10 appstream 1.0 M byacc x86_64 2.0.20230521-7.el10 appstream 115 k diffstat x86_64 1.66-3.el10 appstream 45 k flex x86_64 2.6.4-19.el10 appstream 301 k gdb x86_64 14.2-4.1.el10_0 appstream 138 k git x86_64 2.47.3-1.el10_0 appstream 50 k intltool noarch 0.51.0-29.el10 appstream 60 k jna x86_64 5.14.0-7.el10 appstream 286 k ltrace x86_64 0.7.91-52.el10 appstream 133 k patchutils x86_64 0.4.2-15.el10 appstream 110 k perl-Fedora-VSP noarch 0.001-36.el10 appstream 23 k perl-generators noarch 1.16-7.el10 appstream 16 k pesign x86_64 116-6.el10.alma.1 appstream 194 k redhat-rpm-config noarch 289-1.el10_0.1.alma.1 appstream 71 k rpm-build x86_64 4.19.1.1-12.el10.alma.1 appstream 78 k rpm-sign x86_64 4.19.1.1-12.el10.alma.1 baseos 22 k source-highlight x86_64 3.1.9-25.el10 appstream 782 k strace x86_64 6.12-1.el10 baseos 1.4 M systemtap x86_64 5.2-2.el10 appstream 9.5 k valgrind x86_64 1:3.24.0-5.el10_0 appstream 5.4 M valgrind-devel x86_64 1:3.24.0-5.el10_0 appstream 50 k Installing dependencies: adobe-mappings-cmap noarch 20230622-5.el10 appstream 2.1 M adobe-mappings-cmap-deprecated noarch 20230622-5.el10 appstream 118 k adobe-mappings-pdf noarch 20190401-9.el10 appstream 690 k annobin-docs noarch 12.92-1.el10 appstream 91 k annobin-plugin-gcc x86_64 12.92-1.el10 appstream 982 k boost-atomic x86_64 1.83.0-5.el10 appstream 17 k boost-filesystem x86_64 1.83.0-5.el10 appstream 68 k boost-regex x86_64 1.83.0-5.el10 appstream 110 k boost-system x86_64 1.83.0-5.el10 baseos 14 k boost-thread x86_64 1.83.0-5.el10 appstream 61 k bzip2 x86_64 1.0.8-25.el10 baseos 53 k cairo-gobject x86_64 1.18.2-2.el10 appstream 17 k cmake-rpm-macros noarch 3.30.5-3.el10_0 appstream 15 k cups-filesystem noarch 1:2.4.10-11.el10_0.1 baseos 11 k cups-libs x86_64 1:2.4.10-11.el10_0.1 baseos 260 k debugedit x86_64 5.1-5.el10_0 appstream 78 k docbook-dtds noarch 1.0-90.el10_0 appstream 356 k docbook-style-xsl noarch 1.79.2-28.el10_0 appstream 1.6 M dwz x86_64 0.15-7.el10 appstream 138 k dyninst x86_64 12.3.0-8.el10 appstream 4.0 M ed x86_64 1.20-5.el10 baseos 81 k efi-srpm-macros noarch 6-6.el10.alma.1 appstream 23 k elfutils x86_64 0.192-6.el10_0 baseos 538 k elfutils-devel x86_64 0.192-6.el10_0 appstream 50 k elfutils-libelf-devel x86_64 0.192-6.el10_0 appstream 40 k fonts-srpm-macros noarch 1:2.0.5-18.el10 appstream 26 k forge-srpm-macros noarch 0.4.0-6.el10 appstream 20 k fribidi x86_64 1.0.14-4.el10 appstream 91 k gcc-plugin-annobin x86_64 14.2.1-7.el10.alma.1 appstream 59 k gdb-headless x86_64 14.2-4.1.el10_0 appstream 4.8 M gdk-pixbuf2 x86_64 2.42.12-4.el10_0 appstream 470 k gettext-common-devel noarch 0.22.5-6.el10 appstream 595 k gettext-devel x86_64 0.22.5-6.el10 appstream 243 k git-core x86_64 2.47.3-1.el10_0 appstream 4.8 M git-core-doc noarch 2.47.3-1.el10_0 appstream 2.8 M go-srpm-macros noarch 3.6.0-4.el10 appstream 27 k google-droid-sans-fonts noarch 20200215-22.el10 appstream 2.7 M gpgmepp x86_64 1.23.2-6.el10.alma.1 appstream 140 k graphviz x86_64 9.0.0-15.el10 appstream 1.5 M javapackages-filesystem noarch 6.4.0-1.el10 appstream 12 k jbig2dec-libs x86_64 0.20-7.el10 appstream 74 k kernel-srpm-macros noarch 1.0-25.el10 appstream 9.7 k lcms2 x86_64 2.16-6.el10 appstream 182 k libXft x86_64 2.3.8-8.el10 appstream 72 k libbabeltrace x86_64 1.5.11-9.el10 appstream 190 k libdatrie x86_64 0.2.13-11.el10 appstream 32 k libgs x86_64 10.02.1-16.el10_0 appstream 3.4 M libijs x86_64 0.35-24.el10 appstream 29 k libipt x86_64 2.1-5.el10 appstream 58 k libpaper x86_64 1:2.1.1-7.el10 appstream 27 k librsvg2 x86_64 2.57.1-9.el10 appstream 1.5 M libthai x86_64 0.1.29-10.el10 appstream 213 k libxslt x86_64 1.1.39-8.el10_0 appstream 188 k lua-srpm-macros noarch 1-15.el10 appstream 8.7 k mailcap noarch 2.1.54-8.el10 baseos 34 k nss-tools x86_64 3.112.0-4.el10_0 appstream 438 k ocaml-srpm-macros noarch 10-4.el10 appstream 9.0 k openblas-srpm-macros noarch 2-19.el10 appstream 7.6 k openjpeg2 x86_64 2.5.2-4.el10_0.1 appstream 188 k package-notes-srpm-macros noarch 0.5-13.el10 appstream 9.1 k pango x86_64 1.54.0-3.el10 appstream 353 k patch x86_64 2.7.6-26.el10 appstream 128 k perl-Clone x86_64 0.46-10.el10 appstream 22 k perl-Compress-Raw-Bzip2 x86_64 2.212-512.el10 appstream 35 k perl-Compress-Raw-Zlib x86_64 2.212-512.el10 appstream 64 k perl-Data-Dump noarch 1.25-13.el10 appstream 32 k perl-Digest-HMAC noarch 1.04-12.el10 appstream 22 k perl-Digest-SHA x86_64 1:6.04-512.el10 appstream 62 k perl-Encode-Locale noarch 1.05-31.el10 appstream 18 k perl-Error noarch 1:0.17029-18.el10 appstream 45 k perl-File-Listing noarch 6.16-5.el10 appstream 25 k perl-Git noarch 2.47.3-1.el10_0 appstream 37 k perl-HTML-Parser x86_64 3.82-3.el10 appstream 126 k perl-HTML-Tagset noarch 3.20-59.el10 appstream 18 k perl-HTTP-Cookies noarch 6.11-5.el10 appstream 37 k perl-HTTP-Date noarch 6.06-6.el10 appstream 24 k perl-HTTP-Message noarch 6.45-5.el10 appstream 102 k perl-HTTP-Negotiate noarch 6.01-40.el10 appstream 19 k perl-I18N-Langinfo x86_64 0.24-512.2.el10_0 appstream 25 k perl-IO-Compress noarch 2.212-512.el10 appstream 307 k perl-IO-HTML noarch 1.004-14.el10 appstream 27 k perl-LWP-MediaTypes noarch 6.04-19.el10 appstream 33 k perl-Module-Load noarch 1:0.36-511.el10 appstream 17 k perl-NTLM noarch 1.09-41.el10 appstream 22 k perl-Net-HTTP noarch 6.23-6.el10 appstream 39 k perl-TermReadKey x86_64 2.38-24.el10 appstream 35 k perl-TimeDate noarch 1:2.33-16.el10 appstream 61 k perl-Try-Tiny noarch 0.31-12.el10 appstream 43 k perl-WWW-RobotRules noarch 6.02-41.el10 appstream 19 k perl-XML-Parser x86_64 2.47-6.el10 appstream 240 k perl-lib x86_64 0.65-512.2.el10_0 appstream 15 k perl-libwww-perl noarch 6.76-3.el10 appstream 210 k perl-macros noarch 4:5.40.2-512.2.el10_0 appstream 12 k perl-srpm-macros noarch 1-57.el10 appstream 8.4 k perl-subs noarch 1.04-512.2.el10_0 appstream 11 k poppler x86_64 24.02.0-6.el10 appstream 1.1 M poppler-data noarch 0.4.11-9.el10 appstream 2.0 M poppler-glib x86_64 24.02.0-6.el10 appstream 181 k pyproject-srpm-macros noarch 1.16.2-1.el10 appstream 14 k python-srpm-macros noarch 3.12-9.1.el10 appstream 23 k qt6-srpm-macros noarch 6.8.1-3.el10 appstream 9.6 k rsvg-pixbuf-loader x86_64 2.57.1-9.el10 appstream 15 k rust-toolset-srpm-macros noarch 1.84.1-1.el10.alma.1 appstream 8.0 k sgml-common noarch 0.6.3-65.el10 appstream 63 k systemd-rpm-macros noarch 257-9.el10_0.1.alma.1 baseos 21 k systemtap-client x86_64 5.2-2.el10 appstream 4.2 M systemtap-devel x86_64 5.2-2.el10 appstream 2.5 M systemtap-runtime x86_64 5.2-2.el10 appstream 468 k tbb x86_64 2021.11.0-7.el10 appstream 163 k unzip x86_64 6.0-68.el10 baseos 192 k urw-base35-bookman-fonts noarch 20200910-21.el10 appstream 851 k urw-base35-c059-fonts noarch 20200910-21.el10 appstream 878 k urw-base35-d050000l-fonts noarch 20200910-21.el10 appstream 75 k urw-base35-fonts noarch 20200910-21.el10 appstream 9.5 k urw-base35-fonts-common noarch 20200910-21.el10 appstream 20 k urw-base35-gothic-fonts noarch 20200910-21.el10 appstream 646 k urw-base35-nimbus-mono-ps-fonts noarch 20200910-21.el10 appstream 798 k urw-base35-nimbus-roman-fonts noarch 20200910-21.el10 appstream 860 k urw-base35-nimbus-sans-fonts noarch 20200910-21.el10 appstream 1.3 M urw-base35-p052-fonts noarch 20200910-21.el10 appstream 977 k urw-base35-standard-symbols-ps-fonts noarch 20200910-21.el10 appstream 41 k urw-base35-z003-fonts noarch 20200910-21.el10 appstream 275 k zip x86_64 3.0-44.el10 baseos 272 k zstd x86_64 1.5.5-9.el10 baseos 464 k Installing weak dependencies: elfutils-debuginfod-client-devel x86_64 0.192-6.el10_0 appstream 19 k kernel-devel x86_64 6.12.0-55.37.1.el10_0 appstream 18 M perl-version x86_64 8:0.99.32-4.el10 appstream 63 k Installing Groups: Development Tools Transaction Summary ======================================================================================== Install 149 Packages Total download size: 85 M Installed size: 339 M Downloading Packages: (1/149): adobe-mappings-cmap-deprecated-2023062 30 MB/s | 118 kB 00:00 (2/149): adobe-mappings-pdf-20190401-9.el10.noa 96 MB/s | 690 kB 00:00 (3/149): annobin-plugin-gcc-12.92-1.el10.x86_64 142 MB/s | 982 kB 00:00 (4/149): adobe-mappings-cmap-20230622-5.el10.no 136 MB/s | 2.1 MB 00:00 (5/149): boost-atomic-1.83.0-5.el10.x86_64.rpm 16 MB/s | 17 kB 00:00 (6/149): bison-3.8.2-9.el10.x86_64.rpm 121 MB/s | 1.0 MB 00:00 (7/149): annobin-docs-12.92-1.el10.noarch.rpm 4.3 MB/s | 91 kB 00:00 (8/149): boost-filesystem-1.83.0-5.el10.x86_64. 17 MB/s | 68 kB 00:00 (9/149): boost-regex-1.83.0-5.el10.x86_64.rpm 45 MB/s | 110 kB 00:00 (10/149): boost-thread-1.83.0-5.el10.x86_64.rpm 35 MB/s | 61 kB 00:00 (11/149): cairo-gobject-1.18.2-2.el10.x86_64.rp 10 MB/s | 17 kB 00:00 (12/149): cmake-rpm-macros-3.30.5-3.el10_0.noar 10 MB/s | 15 kB 00:00 (13/149): asciidoc-10.2.0-12.el10.noarch.rpm 16 MB/s | 428 kB 00:00 (14/149): docbook-dtds-1.0-90.el10_0.noarch.rpm 160 MB/s | 356 kB 00:00 (15/149): docbook-style-xsl-1.79.2-28.el10_0.no 274 MB/s | 1.6 MB 00:00 (16/149): debugedit-5.1-5.el10_0.x86_64.rpm 4.2 MB/s | 78 kB 00:00 (17/149): diffstat-1.66-3.el10.x86_64.rpm 2.5 MB/s | 45 kB 00:00 (18/149): dwz-0.15-7.el10.x86_64.rpm 56 MB/s | 138 kB 00:00 (19/149): efi-srpm-macros-6-6.el10.alma.1.noarc 13 MB/s | 23 kB 00:00 (20/149): elfutils-debuginfod-client-devel-0.19 11 MB/s | 19 kB 00:00 (21/149): elfutils-libelf-devel-0.192-6.el10_0. 32 MB/s | 40 kB 00:00 (22/149): elfutils-devel-0.192-6.el10_0.x86_64. 2.9 MB/s | 50 kB 00:00 (23/149): fonts-srpm-macros-2.0.5-18.el10.noarc 21 MB/s | 26 kB 00:00 (24/149): forge-srpm-macros-0.4.0-6.el10.noarch 19 MB/s | 20 kB 00:00 (25/149): fribidi-1.0.14-4.el10.x86_64.rpm 59 MB/s | 91 kB 00:00 (26/149): dyninst-12.3.0-8.el10.x86_64.rpm 131 MB/s | 4.0 MB 00:00 (27/149): gcc-plugin-annobin-14.2.1-7.el10.alma 7.9 MB/s | 59 kB 00:00 (28/149): gdb-14.2-4.1.el10_0.x86_64.rpm 65 MB/s | 138 kB 00:00 (29/149): gdk-pixbuf2-2.42.12-4.el10_0.x86_64.r 161 MB/s | 470 kB 00:00 (30/149): flex-2.6.4-19.el10.x86_64.rpm 8.9 MB/s | 301 kB 00:00 (31/149): gettext-common-devel-0.22.5-6.el10.no 136 MB/s | 595 kB 00:00 (32/149): git-2.47.3-1.el10_0.x86_64.rpm 30 MB/s | 50 kB 00:00 (33/149): gettext-devel-0.22.5-6.el10.x86_64.rp 40 MB/s | 243 kB 00:00 (34/149): gdb-headless-14.2-4.1.el10_0.x86_64.r 201 MB/s | 4.8 MB 00:00 (35/149): go-srpm-macros-3.6.0-4.el10.noarch.rp 17 MB/s | 27 kB 00:00 (36/149): git-core-doc-2.47.3-1.el10_0.noarch.r 134 MB/s | 2.8 MB 00:00 (37/149): gpgmepp-1.23.2-6.el10.alma.1.x86_64.r 83 MB/s | 140 kB 00:00 (38/149): git-core-2.47.3-1.el10_0.x86_64.rpm 138 MB/s | 4.8 MB 00:00 (39/149): google-droid-sans-fonts-20200215-22.e 111 MB/s | 2.7 MB 00:00 (40/149): intltool-0.51.0-29.el10.noarch.rpm 10 MB/s | 60 kB 00:00 (41/149): javapackages-filesystem-6.4.0-1.el10. 6.1 MB/s | 12 kB 00:00 (42/149): byacc-2.0.20230521-7.el10.x86_64.rpm 1.0 MB/s | 115 kB 00:00 (43/149): graphviz-9.0.0-15.el10.x86_64.rpm 73 MB/s | 1.5 MB 00:00 (44/149): jbig2dec-libs-0.20-7.el10.x86_64.rpm 8.1 MB/s | 74 kB 00:00 (45/149): jna-5.14.0-7.el10.x86_64.rpm 28 MB/s | 286 kB 00:00 (46/149): lcms2-2.16-6.el10.x86_64.rpm 56 MB/s | 182 kB 00:00 (47/149): libXft-2.3.8-8.el10.x86_64.rpm 29 MB/s | 72 kB 00:00 (48/149): libbabeltrace-1.5.11-9.el10.x86_64.rp 76 MB/s | 190 kB 00:00 (49/149): libdatrie-0.2.13-11.el10.x86_64.rpm 14 MB/s | 32 kB 00:00 (50/149): libijs-0.35-24.el10.x86_64.rpm 7.9 MB/s | 29 kB 00:00 (51/149): libgs-10.02.1-16.el10_0.x86_64.rpm 242 MB/s | 3.4 MB 00:00 (52/149): kernel-srpm-macros-1.0-25.el10.noarch 264 kB/s | 9.7 kB 00:00 (53/149): kernel-devel-6.12.0-55.37.1.el10_0.x8 297 MB/s | 18 MB 00:00 (54/149): libipt-2.1-5.el10.x86_64.rpm 1.3 MB/s | 58 kB 00:00 (55/149): libpaper-2.1.1-7.el10.x86_64.rpm 747 kB/s | 27 kB 00:00 (56/149): libthai-0.1.29-10.el10.x86_64.rpm 57 MB/s | 213 kB 00:00 (57/149): ltrace-0.7.91-52.el10.x86_64.rpm 46 MB/s | 133 kB 00:00 (58/149): libxslt-1.1.39-8.el10_0.x86_64.rpm 45 MB/s | 188 kB 00:00 (59/149): lua-srpm-macros-1-15.el10.noarch.rpm 3.0 MB/s | 8.7 kB 00:00 (60/149): openblas-srpm-macros-2-19.el10.noarch 7.4 MB/s | 7.6 kB 00:00 (61/149): openjpeg2-2.5.2-4.el10_0.1.x86_64.rpm 110 MB/s | 188 kB 00:00 (62/149): package-notes-srpm-macros-0.5-13.el10 8.9 MB/s | 9.1 kB 00:00 (63/149): nss-tools-3.112.0-4.el10_0.x86_64.rpm 47 MB/s | 438 kB 00:00 (64/149): ocaml-srpm-macros-10-4.el10.noarch.rp 1.1 MB/s | 9.0 kB 00:00 (65/149): pango-1.54.0-3.el10.x86_64.rpm 79 MB/s | 353 kB 00:00 (66/149): perl-Clone-0.46-10.el10.x86_64.rpm 21 MB/s | 22 kB 00:00 (67/149): perl-Compress-Raw-Bzip2-2.212-512.el1 34 MB/s | 35 kB 00:00 (68/149): perl-Compress-Raw-Zlib-2.212-512.el10 49 MB/s | 64 kB 00:00 (69/149): perl-Data-Dump-1.25-13.el10.noarch.rp 29 MB/s | 32 kB 00:00 (70/149): perl-Digest-HMAC-1.04-12.el10.noarch. 21 MB/s | 22 kB 00:00 (71/149): perl-Digest-SHA-6.04-512.el10.x86_64. 48 MB/s | 62 kB 00:00 (72/149): perl-Encode-Locale-1.05-31.el10.noarc 18 MB/s | 18 kB 00:00 (73/149): perl-Error-0.17029-18.el10.noarch.rpm 40 MB/s | 45 kB 00:00 (74/149): patchutils-0.4.2-15.el10.x86_64.rpm 9.1 MB/s | 110 kB 00:00 (75/149): patch-2.7.6-26.el10.x86_64.rpm 9.4 MB/s | 128 kB 00:00 (76/149): perl-Fedora-VSP-0.001-36.el10.noarch. 7.9 MB/s | 23 kB 00:00 (77/149): perl-File-Listing-6.16-5.el10.noarch. 9.5 MB/s | 25 kB 00:00 (78/149): perl-Git-2.47.3-1.el10_0.noarch.rpm 22 MB/s | 37 kB 00:00 (79/149): perl-HTML-Parser-3.82-3.el10.x86_64.r 52 MB/s | 126 kB 00:00 (80/149): perl-HTML-Tagset-3.20-59.el10.noarch. 7.4 MB/s | 18 kB 00:00 (81/149): perl-HTTP-Cookies-6.11-5.el10.noarch. 25 MB/s | 37 kB 00:00 (82/149): perl-HTTP-Date-6.06-6.el10.noarch.rpm 12 MB/s | 24 kB 00:00 (83/149): perl-HTTP-Message-6.45-5.el10.noarch. 40 MB/s | 102 kB 00:00 (84/149): perl-HTTP-Negotiate-6.01-40.el10.noar 11 MB/s | 19 kB 00:00 (85/149): perl-I18N-Langinfo-0.24-512.2.el10_0. 10 MB/s | 25 kB 00:00 (86/149): librsvg2-2.57.1-9.el10.x86_64.rpm 23 MB/s | 1.5 MB 00:00 (87/149): perl-IO-Compress-2.212-512.el10.noarc 48 MB/s | 307 kB 00:00 (88/149): perl-IO-HTML-1.004-14.el10.noarch.rpm 5.3 MB/s | 27 kB 00:00 (89/149): perl-LWP-MediaTypes-6.04-19.el10.noar 5.8 MB/s | 33 kB 00:00 (90/149): perl-NTLM-1.09-41.el10.noarch.rpm 18 MB/s | 22 kB 00:00 (91/149): perl-TermReadKey-2.38-24.el10.x86_64. 21 MB/s | 35 kB 00:00 (92/149): perl-Net-HTTP-6.23-6.el10.noarch.rpm 15 MB/s | 39 kB 00:00 (93/149): perl-TimeDate-2.33-16.el10.noarch.rpm 38 MB/s | 61 kB 00:00 (94/149): perl-Try-Tiny-0.31-12.el10.noarch.rpm 20 MB/s | 43 kB 00:00 (95/149): perl-WWW-RobotRules-6.02-41.el10.noar 9.3 MB/s | 19 kB 00:00 (96/149): perl-generators-1.16-7.el10.noarch.rp 11 MB/s | 16 kB 00:00 (97/149): perl-XML-Parser-2.47-6.el10.x86_64.rp 81 MB/s | 240 kB 00:00 (98/149): perl-lib-0.65-512.2.el10_0.x86_64.rpm 5.9 MB/s | 15 kB 00:00 (99/149): perl-libwww-perl-6.76-3.el10.noarch.r 66 MB/s | 210 kB 00:00 (100/149): perl-macros-5.40.2-512.2.el10_0.noar 5.9 MB/s | 12 kB 00:00 (101/149): perl-srpm-macros-1-57.el10.noarch.rp 3.4 MB/s | 8.4 kB 00:00 (102/149): perl-subs-1.04-512.2.el10_0.noarch.r 5.6 MB/s | 11 kB 00:00 (103/149): perl-version-0.99.32-4.el10.x86_64.r 34 MB/s | 63 kB 00:00 (104/149): pesign-116-6.el10.alma.1.x86_64.rpm 55 MB/s | 194 kB 00:00 (105/149): poppler-glib-24.02.0-6.el10.x86_64.r 69 MB/s | 181 kB 00:00 (106/149): poppler-24.02.0-6.el10.x86_64.rpm 131 MB/s | 1.1 MB 00:00 (107/149): pyproject-srpm-macros-1.16.2-1.el10. 3.7 MB/s | 14 kB 00:00 (108/149): python-srpm-macros-3.12-9.1.el10.noa 14 MB/s | 23 kB 00:00 (109/149): qt6-srpm-macros-6.8.1-3.el10.noarch. 6.1 MB/s | 9.6 kB 00:00 (110/149): redhat-rpm-config-289-1.el10_0.1.alm 39 MB/s | 71 kB 00:00 (111/149): rpm-build-4.19.1.1-12.el10.alma.1.x8 38 MB/s | 78 kB 00:00 (112/149): poppler-data-0.4.11-9.el10.noarch.rp 123 MB/s | 2.0 MB 00:00 (113/149): rsvg-pixbuf-loader-2.57.1-9.el10.x86 2.9 MB/s | 15 kB 00:00 (114/149): rust-toolset-srpm-macros-1.84.1-1.el 1.6 MB/s | 8.0 kB 00:00 (115/149): sgml-common-0.6.3-65.el10.noarch.rpm 34 MB/s | 63 kB 00:00 (116/149): source-highlight-3.1.9-25.el10.x86_6 158 MB/s | 782 kB 00:00 (117/149): systemtap-client-5.2-2.el10.x86_64.r 302 MB/s | 4.2 MB 00:00 (118/149): systemtap-runtime-5.2-2.el10.x86_64. 187 MB/s | 468 kB 00:00 (119/149): tbb-2021.11.0-7.el10.x86_64.rpm 104 MB/s | 163 kB 00:00 (120/149): urw-base35-bookman-fonts-20200910-21 242 MB/s | 851 kB 00:00 (121/149): urw-base35-c059-fonts-20200910-21.el 245 MB/s | 878 kB 00:00 (122/149): systemtap-5.2-2.el10.x86_64.rpm 345 kB/s | 9.5 kB 00:00 (123/149): urw-base35-fonts-20200910-21.el10.no 9.3 MB/s | 9.5 kB 00:00 (124/149): urw-base35-fonts-common-20200910-21. 20 MB/s | 20 kB 00:00 (125/149): urw-base35-gothic-fonts-20200910-21. 223 MB/s | 646 kB 00:00 (126/149): urw-base35-nimbus-mono-ps-fonts-2020 255 MB/s | 798 kB 00:00 (127/149): urw-base35-nimbus-roman-fonts-202009 249 MB/s | 860 kB 00:00 (128/149): urw-base35-nimbus-sans-fonts-2020091 281 MB/s | 1.3 MB 00:00 (129/149): perl-Module-Load-0.36-511.el10.noarc 214 kB/s | 17 kB 00:00 (130/149): urw-base35-p052-fonts-20200910-21.el 231 MB/s | 977 kB 00:00 (131/149): urw-base35-standard-symbols-ps-fonts 11 MB/s | 41 kB 00:00 (132/149): urw-base35-z003-fonts-20200910-21.el 122 MB/s | 275 kB 00:00 (133/149): urw-base35-d050000l-fonts-20200910-2 1.6 MB/s | 75 kB 00:00 (134/149): boost-system-1.83.0-5.el10.x86_64.rp 12 MB/s | 14 kB 00:00 (135/149): bzip2-1.0.8-25.el10.x86_64.rpm 43 MB/s | 53 kB 00:00 (136/149): systemtap-devel-5.2-2.el10.x86_64.rp 31 MB/s | 2.5 MB 00:00 (137/149): cups-filesystem-2.4.10-11.el10_0.1.n 2.3 MB/s | 11 kB 00:00 (138/149): ed-1.20-5.el10.x86_64.rpm 57 MB/s | 81 kB 00:00 (139/149): cups-libs-2.4.10-11.el10_0.1.x86_64. 76 MB/s | 260 kB 00:00 (140/149): mailcap-2.1.54-8.el10.noarch.rpm 33 MB/s | 34 kB 00:00 (141/149): elfutils-0.192-6.el10_0.x86_64.rpm 106 MB/s | 538 kB 00:00 (142/149): rpm-sign-4.19.1.1-12.el10.alma.1.x86 2.3 MB/s | 22 kB 00:00 (143/149): systemd-rpm-macros-257-9.el10_0.1.al 19 MB/s | 21 kB 00:00 (144/149): valgrind-devel-3.24.0-5.el10_0.x86_6 976 kB/s | 50 kB 00:00 (145/149): unzip-6.0-68.el10.x86_64.rpm 66 MB/s | 192 kB 00:00 (146/149): strace-6.12-1.el10.x86_64.rpm 87 MB/s | 1.4 MB 00:00 (147/149): valgrind-3.24.0-5.el10_0.x86_64.rpm 83 MB/s | 5.4 MB 00:00 (148/149): zip-3.0-44.el10.x86_64.rpm 21 MB/s | 272 kB 00:00 (149/149): zstd-1.5.5-9.el10.x86_64.rpm 33 MB/s | 464 kB 00:00 -------------------------------------------------------------------------------- Total 198 MB/s | 85 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : urw-base35-fonts-common-20200910-21.el10.noarch 1/149 Installing : boost-system-1.83.0-5.el10.x86_64 2/149 Installing : unzip-6.0-68.el10.x86_64 3/149 Installing : perl-Compress-Raw-Zlib-2.212-512.el10.x86_64 4/149 Installing : gdk-pixbuf2-2.42.12-4.el10_0.x86_64 5/149 Installing : zip-3.0-44.el10.x86_64 6/149 Installing : elfutils-0.192-6.el10_0.x86_64 7/149 Installing : openjpeg2-2.5.2-4.el10_0.1.x86_64 8/149 Installing : lcms2-2.16-6.el10.x86_64 9/149 Installing : git-core-2.47.3-1.el10_0.x86_64 10/149 Installing : elfutils-libelf-devel-0.192-6.el10_0.x86_64 11/149 Installing : dwz-0.15-7.el10.x86_64 12/149 Installing : cairo-gobject-1.18.2-2.el10.x86_64 13/149 Installing : adobe-mappings-cmap-20230622-5.el10.noarch 14/149 Installing : adobe-mappings-cmap-deprecated-20230622-5.el10.n 15/149 Installing : git-core-doc-2.47.3-1.el10_0.noarch 16/149 Installing : boost-thread-1.83.0-5.el10.x86_64 17/149 Installing : urw-base35-bookman-fonts-20200910-21.el10.noarch 18/149 Running scriptlet: urw-base35-bookman-fonts-20200910-21.el10.noarch 18/149 Installing : urw-base35-c059-fonts-20200910-21.el10.noarch 19/149 Running scriptlet: urw-base35-c059-fonts-20200910-21.el10.noarch 19/149 Installing : urw-base35-d050000l-fonts-20200910-21.el10.noarc 20/149 Running scriptlet: urw-base35-d050000l-fonts-20200910-21.el10.noarc 20/149 Installing : urw-base35-gothic-fonts-20200910-21.el10.noarch 21/149 Running scriptlet: urw-base35-gothic-fonts-20200910-21.el10.noarch 21/149 Installing : urw-base35-nimbus-mono-ps-fonts-20200910-21.el10 22/149 Running scriptlet: urw-base35-nimbus-mono-ps-fonts-20200910-21.el10 22/149 Installing : urw-base35-nimbus-roman-fonts-20200910-21.el10.n 23/149 Running scriptlet: urw-base35-nimbus-roman-fonts-20200910-21.el10.n 23/149 Installing : urw-base35-nimbus-sans-fonts-20200910-21.el10.no 24/149 Running scriptlet: urw-base35-nimbus-sans-fonts-20200910-21.el10.no 24/149 Installing : urw-base35-p052-fonts-20200910-21.el10.noarch 25/149 Running scriptlet: urw-base35-p052-fonts-20200910-21.el10.noarch 25/149 Installing : urw-base35-standard-symbols-ps-fonts-20200910-21 26/149 Running scriptlet: urw-base35-standard-symbols-ps-fonts-20200910-21 26/149 Installing : urw-base35-z003-fonts-20200910-21.el10.noarch 27/149 Running scriptlet: urw-base35-z003-fonts-20200910-21.el10.noarch 27/149 Installing : urw-base35-fonts-20200910-21.el10.noarch 28/149 Installing : zstd-1.5.5-9.el10.x86_64 29/149 Installing : mailcap-2.1.54-8.el10.noarch 30/149 Installing : perl-LWP-MediaTypes-6.04-19.el10.noarch 31/149 Installing : ed-1.20-5.el10.x86_64 32/149 Installing : patch-2.7.6-26.el10.x86_64 33/149 Installing : cups-filesystem-1:2.4.10-11.el10_0.1.noarch 34/149 Installing : cups-libs-1:2.4.10-11.el10_0.1.x86_64 35/149 Installing : bzip2-1.0.8-25.el10.x86_64 36/149 Installing : valgrind-1:3.24.0-5.el10_0.x86_64 37/149 Installing : tbb-2021.11.0-7.el10.x86_64 38/149 Installing : sgml-common-0.6.3-65.el10.noarch 39/149 Installing : docbook-dtds-1.0-90.el10_0.noarch 40/149 Running scriptlet: docbook-dtds-1.0-90.el10_0.noarch 40/149 Installing : docbook-style-xsl-1.79.2-28.el10_0.noarch 41/149 Running scriptlet: docbook-style-xsl-1.79.2-28.el10_0.noarch 41/149 Installing : rust-toolset-srpm-macros-1.84.1-1.el10.alma.1.no 42/149 Installing : qt6-srpm-macros-6.8.1-3.el10.noarch 43/149 Installing : poppler-data-0.4.11-9.el10.noarch 44/149 Installing : perl-version-8:0.99.32-4.el10.x86_64 45/149 Installing : perl-subs-1.04-512.2.el10_0.noarch 46/149 Installing : perl-Data-Dump-1.25-13.el10.noarch 47/149 Installing : perl-srpm-macros-1-57.el10.noarch 48/149 Installing : perl-macros-4:5.40.2-512.2.el10_0.noarch 49/149 Installing : perl-lib-0.65-512.2.el10_0.x86_64 50/149 Installing : perl-WWW-RobotRules-6.02-41.el10.noarch 51/149 Installing : perl-Try-Tiny-0.31-12.el10.noarch 52/149 Installing : perl-TimeDate-1:2.33-16.el10.noarch 53/149 Installing : perl-HTTP-Date-6.06-6.el10.noarch 54/149 Installing : perl-File-Listing-6.16-5.el10.noarch 55/149 Installing : perl-TermReadKey-2.38-24.el10.x86_64 56/149 Installing : perl-Module-Load-1:0.36-511.el10.noarch 57/149 Installing : perl-IO-HTML-1.004-14.el10.noarch 58/149 Installing : perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 59/149 Installing : perl-Encode-Locale-1.05-31.el10.noarch 60/149 Installing : perl-HTML-Tagset-3.20-59.el10.noarch 61/149 Installing : perl-Fedora-VSP-0.001-36.el10.noarch 62/149 Installing : perl-Error-1:0.17029-18.el10.noarch 63/149 Installing : perl-Git-2.47.3-1.el10_0.noarch 64/149 Installing : git-2.47.3-1.el10_0.x86_64 65/149 Installing : perl-Digest-SHA-1:6.04-512.el10.x86_64 66/149 Installing : perl-Digest-HMAC-1.04-12.el10.noarch 67/149 Installing : perl-NTLM-1.09-41.el10.noarch 68/149 Installing : perl-Compress-Raw-Bzip2-2.212-512.el10.x86_64 69/149 Installing : perl-IO-Compress-2.212-512.el10.noarch 70/149 Installing : perl-Net-HTTP-6.23-6.el10.noarch 71/149 Installing : perl-Clone-0.46-10.el10.x86_64 72/149 Installing : perl-HTTP-Message-6.45-5.el10.noarch 73/149 Installing : perl-HTML-Parser-3.82-3.el10.x86_64 74/149 Installing : perl-HTTP-Cookies-6.11-5.el10.noarch 75/149 Installing : perl-HTTP-Negotiate-6.01-40.el10.noarch 76/149 Installing : perl-libwww-perl-6.76-3.el10.noarch 77/149 Installing : perl-XML-Parser-2.47-6.el10.x86_64 78/149 Installing : package-notes-srpm-macros-0.5-13.el10.noarch 79/149 Installing : openblas-srpm-macros-2-19.el10.noarch 80/149 Installing : ocaml-srpm-macros-10-4.el10.noarch 81/149 Installing : nss-tools-3.112.0-4.el10_0.x86_64 82/149 Installing : lua-srpm-macros-1-15.el10.noarch 83/149 Installing : libxslt-1.1.39-8.el10_0.x86_64 84/149 Installing : libpaper-1:2.1.1-7.el10.x86_64 85/149 Installing : libipt-2.1-5.el10.x86_64 86/149 Installing : libijs-0.35-24.el10.x86_64 87/149 Installing : libdatrie-0.2.13-11.el10.x86_64 88/149 Installing : libthai-0.1.29-10.el10.x86_64 89/149 Installing : libbabeltrace-1.5.11-9.el10.x86_64 90/149 Installing : libXft-2.3.8-8.el10.x86_64 91/149 Installing : kernel-srpm-macros-1.0-25.el10.noarch 92/149 Installing : jbig2dec-libs-0.20-7.el10.x86_64 93/149 Installing : javapackages-filesystem-6.4.0-1.el10.noarch 94/149 Installing : gpgmepp-1.23.2-6.el10.alma.1.x86_64 95/149 Installing : poppler-24.02.0-6.el10.x86_64 96/149 Installing : poppler-glib-24.02.0-6.el10.x86_64 97/149 Installing : google-droid-sans-fonts-20200215-22.el10.noarch 98/149 Installing : gettext-common-devel-0.22.5-6.el10.noarch 99/149 Installing : gettext-devel-0.22.5-6.el10.x86_64 100/149 Installing : gcc-plugin-annobin-14.2.1-7.el10.alma.1.x86_64 101/149 Installing : fribidi-1.0.14-4.el10.x86_64 102/149 Installing : pango-1.54.0-3.el10.x86_64 103/149 Installing : librsvg2-2.57.1-9.el10.x86_64 104/149 Installing : rsvg-pixbuf-loader-2.57.1-9.el10.x86_64 105/149 Installing : flex-2.6.4-19.el10.x86_64 106/149 Installing : elfutils-debuginfod-client-devel-0.192-6.el10_0. 107/149 Installing : elfutils-devel-0.192-6.el10_0.x86_64 108/149 Installing : efi-srpm-macros-6-6.el10.alma.1.noarch 109/149 Installing : boost-regex-1.83.0-5.el10.x86_64 110/149 Installing : source-highlight-3.1.9-25.el10.x86_64 111/149 Installing : gdb-headless-14.2-4.1.el10_0.x86_64 112/149 Installing : debugedit-5.1-5.el10_0.x86_64 113/149 Installing : boost-atomic-1.83.0-5.el10.x86_64 114/149 Installing : boost-filesystem-1.83.0-5.el10.x86_64 115/149 Installing : dyninst-12.3.0-8.el10.x86_64 116/149 Running scriptlet: dyninst-12.3.0-8.el10.x86_64 116/149 Running scriptlet: systemtap-runtime-5.2-2.el10.x86_64 117/149 Creating group 'stapusr' with GID 156. Creating group 'stapsys' with GID 157. Creating group 'stapdev' with GID 158. Creating group 'stapunpriv' with GID 159. Creating user 'stapunpriv' (systemtap unprivileged user) with UID 159 and GID 159. Installing : systemtap-runtime-5.2-2.el10.x86_64 117/149 Installing : systemtap-client-5.2-2.el10.x86_64 118/149 Installing : bison-3.8.2-9.el10.x86_64 119/149 Installing : kernel-devel-6.12.0-55.37.1.el10_0.x86_64 120/149 Running scriptlet: kernel-devel-6.12.0-55.37.1.el10_0.x86_64 120/149 Installing : systemtap-devel-5.2-2.el10.x86_64 121/149 Installing : annobin-docs-12.92-1.el10.noarch 122/149 Installing : annobin-plugin-gcc-12.92-1.el10.x86_64 123/149 Installing : fonts-srpm-macros-1:2.0.5-18.el10.noarch 124/149 Installing : forge-srpm-macros-0.4.0-6.el10.noarch 125/149 Installing : go-srpm-macros-3.6.0-4.el10.noarch 126/149 Installing : python-srpm-macros-3.12-9.1.el10.noarch 127/149 Installing : pyproject-srpm-macros-1.16.2-1.el10.noarch 128/149 Installing : redhat-rpm-config-289-1.el10_0.1.alma.1.noarch 129/149 Running scriptlet: redhat-rpm-config-289-1.el10_0.1.alma.1.noarch 129/149 Installing : rpm-build-4.19.1.1-12.el10.alma.1.x86_64 130/149 Installing : adobe-mappings-pdf-20190401-9.el10.noarch 131/149 Installing : libgs-10.02.1-16.el10_0.x86_64 132/149 Installing : graphviz-9.0.0-15.el10.x86_64 133/149 Installing : asciidoc-10.2.0-12.el10.noarch 134/149 Installing : systemtap-5.2-2.el10.x86_64 135/149 Running scriptlet: systemtap-5.2-2.el10.x86_64 135/149 Installing : gdb-14.2-4.1.el10_0.x86_64 136/149 Installing : intltool-0.51.0-29.el10.noarch 137/149 Installing : jna-5.14.0-7.el10.x86_64 138/149 Running scriptlet: pesign-116-6.el10.alma.1.x86_64 139/149 Installing : pesign-116-6.el10.alma.1.x86_64 139/149 Running scriptlet: pesign-116-6.el10.alma.1.x86_64 139/149 Installing : perl-generators-1.16-7.el10.noarch 140/149 Installing : valgrind-devel-1:3.24.0-5.el10_0.x86_64 141/149 Installing : patchutils-0.4.2-15.el10.x86_64 142/149 Installing : systemd-rpm-macros-257-9.el10_0.1.alma.1.noarch 143/149 Installing : strace-6.12-1.el10.x86_64 144/149 Installing : rpm-sign-4.19.1.1-12.el10.alma.1.x86_64 145/149 Installing : ltrace-0.7.91-52.el10.x86_64 146/149 Installing : diffstat-1.66-3.el10.x86_64 147/149 Installing : cmake-rpm-macros-3.30.5-3.el10_0.noarch 148/149 Installing : byacc-2.0.20230521-7.el10.x86_64 149/149 Running scriptlet: urw-base35-bookman-fonts-20200910-21.el10.noarch 149/149 Running scriptlet: urw-base35-c059-fonts-20200910-21.el10.noarch 149/149 Running scriptlet: urw-base35-d050000l-fonts-20200910-21.el10.noarc 149/149 Running scriptlet: urw-base35-gothic-fonts-20200910-21.el10.noarch 149/149 Running scriptlet: urw-base35-nimbus-mono-ps-fonts-20200910-21.el10 149/149 Running scriptlet: urw-base35-nimbus-roman-fonts-20200910-21.el10.n 149/149 Running scriptlet: urw-base35-nimbus-sans-fonts-20200910-21.el10.no 149/149 Running scriptlet: urw-base35-p052-fonts-20200910-21.el10.noarch 149/149 Running scriptlet: urw-base35-standard-symbols-ps-fonts-20200910-21 149/149 Running scriptlet: urw-base35-z003-fonts-20200910-21.el10.noarch 149/149 Running scriptlet: pesign-116-6.el10.alma.1.x86_64 149/149 Running scriptlet: byacc-2.0.20230521-7.el10.x86_64 149/149 Installed: adobe-mappings-cmap-20230622-5.el10.noarch adobe-mappings-cmap-deprecated-20230622-5.el10.noarch adobe-mappings-pdf-20190401-9.el10.noarch annobin-docs-12.92-1.el10.noarch annobin-plugin-gcc-12.92-1.el10.x86_64 asciidoc-10.2.0-12.el10.noarch bison-3.8.2-9.el10.x86_64 boost-atomic-1.83.0-5.el10.x86_64 boost-filesystem-1.83.0-5.el10.x86_64 boost-regex-1.83.0-5.el10.x86_64 boost-system-1.83.0-5.el10.x86_64 boost-thread-1.83.0-5.el10.x86_64 byacc-2.0.20230521-7.el10.x86_64 bzip2-1.0.8-25.el10.x86_64 cairo-gobject-1.18.2-2.el10.x86_64 cmake-rpm-macros-3.30.5-3.el10_0.noarch cups-filesystem-1:2.4.10-11.el10_0.1.noarch cups-libs-1:2.4.10-11.el10_0.1.x86_64 debugedit-5.1-5.el10_0.x86_64 diffstat-1.66-3.el10.x86_64 docbook-dtds-1.0-90.el10_0.noarch docbook-style-xsl-1.79.2-28.el10_0.noarch dwz-0.15-7.el10.x86_64 dyninst-12.3.0-8.el10.x86_64 ed-1.20-5.el10.x86_64 efi-srpm-macros-6-6.el10.alma.1.noarch elfutils-0.192-6.el10_0.x86_64 elfutils-debuginfod-client-devel-0.192-6.el10_0.x86_64 elfutils-devel-0.192-6.el10_0.x86_64 elfutils-libelf-devel-0.192-6.el10_0.x86_64 flex-2.6.4-19.el10.x86_64 fonts-srpm-macros-1:2.0.5-18.el10.noarch forge-srpm-macros-0.4.0-6.el10.noarch fribidi-1.0.14-4.el10.x86_64 gcc-plugin-annobin-14.2.1-7.el10.alma.1.x86_64 gdb-14.2-4.1.el10_0.x86_64 gdb-headless-14.2-4.1.el10_0.x86_64 gdk-pixbuf2-2.42.12-4.el10_0.x86_64 gettext-common-devel-0.22.5-6.el10.noarch gettext-devel-0.22.5-6.el10.x86_64 git-2.47.3-1.el10_0.x86_64 git-core-2.47.3-1.el10_0.x86_64 git-core-doc-2.47.3-1.el10_0.noarch go-srpm-macros-3.6.0-4.el10.noarch google-droid-sans-fonts-20200215-22.el10.noarch gpgmepp-1.23.2-6.el10.alma.1.x86_64 graphviz-9.0.0-15.el10.x86_64 intltool-0.51.0-29.el10.noarch javapackages-filesystem-6.4.0-1.el10.noarch jbig2dec-libs-0.20-7.el10.x86_64 jna-5.14.0-7.el10.x86_64 kernel-devel-6.12.0-55.37.1.el10_0.x86_64 kernel-srpm-macros-1.0-25.el10.noarch lcms2-2.16-6.el10.x86_64 libXft-2.3.8-8.el10.x86_64 libbabeltrace-1.5.11-9.el10.x86_64 libdatrie-0.2.13-11.el10.x86_64 libgs-10.02.1-16.el10_0.x86_64 libijs-0.35-24.el10.x86_64 libipt-2.1-5.el10.x86_64 libpaper-1:2.1.1-7.el10.x86_64 librsvg2-2.57.1-9.el10.x86_64 libthai-0.1.29-10.el10.x86_64 libxslt-1.1.39-8.el10_0.x86_64 ltrace-0.7.91-52.el10.x86_64 lua-srpm-macros-1-15.el10.noarch mailcap-2.1.54-8.el10.noarch nss-tools-3.112.0-4.el10_0.x86_64 ocaml-srpm-macros-10-4.el10.noarch openblas-srpm-macros-2-19.el10.noarch openjpeg2-2.5.2-4.el10_0.1.x86_64 package-notes-srpm-macros-0.5-13.el10.noarch pango-1.54.0-3.el10.x86_64 patch-2.7.6-26.el10.x86_64 patchutils-0.4.2-15.el10.x86_64 perl-Clone-0.46-10.el10.x86_64 perl-Compress-Raw-Bzip2-2.212-512.el10.x86_64 perl-Compress-Raw-Zlib-2.212-512.el10.x86_64 perl-Data-Dump-1.25-13.el10.noarch perl-Digest-HMAC-1.04-12.el10.noarch perl-Digest-SHA-1:6.04-512.el10.x86_64 perl-Encode-Locale-1.05-31.el10.noarch perl-Error-1:0.17029-18.el10.noarch perl-Fedora-VSP-0.001-36.el10.noarch perl-File-Listing-6.16-5.el10.noarch perl-Git-2.47.3-1.el10_0.noarch perl-HTML-Parser-3.82-3.el10.x86_64 perl-HTML-Tagset-3.20-59.el10.noarch perl-HTTP-Cookies-6.11-5.el10.noarch perl-HTTP-Date-6.06-6.el10.noarch perl-HTTP-Message-6.45-5.el10.noarch perl-HTTP-Negotiate-6.01-40.el10.noarch perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 perl-IO-Compress-2.212-512.el10.noarch perl-IO-HTML-1.004-14.el10.noarch perl-LWP-MediaTypes-6.04-19.el10.noarch perl-Module-Load-1:0.36-511.el10.noarch perl-NTLM-1.09-41.el10.noarch perl-Net-HTTP-6.23-6.el10.noarch perl-TermReadKey-2.38-24.el10.x86_64 perl-TimeDate-1:2.33-16.el10.noarch perl-Try-Tiny-0.31-12.el10.noarch perl-WWW-RobotRules-6.02-41.el10.noarch perl-XML-Parser-2.47-6.el10.x86_64 perl-generators-1.16-7.el10.noarch perl-lib-0.65-512.2.el10_0.x86_64 perl-libwww-perl-6.76-3.el10.noarch perl-macros-4:5.40.2-512.2.el10_0.noarch perl-srpm-macros-1-57.el10.noarch perl-subs-1.04-512.2.el10_0.noarch perl-version-8:0.99.32-4.el10.x86_64 pesign-116-6.el10.alma.1.x86_64 poppler-24.02.0-6.el10.x86_64 poppler-data-0.4.11-9.el10.noarch poppler-glib-24.02.0-6.el10.x86_64 pyproject-srpm-macros-1.16.2-1.el10.noarch python-srpm-macros-3.12-9.1.el10.noarch qt6-srpm-macros-6.8.1-3.el10.noarch redhat-rpm-config-289-1.el10_0.1.alma.1.noarch rpm-build-4.19.1.1-12.el10.alma.1.x86_64 rpm-sign-4.19.1.1-12.el10.alma.1.x86_64 rsvg-pixbuf-loader-2.57.1-9.el10.x86_64 rust-toolset-srpm-macros-1.84.1-1.el10.alma.1.noarch sgml-common-0.6.3-65.el10.noarch source-highlight-3.1.9-25.el10.x86_64 strace-6.12-1.el10.x86_64 systemd-rpm-macros-257-9.el10_0.1.alma.1.noarch systemtap-5.2-2.el10.x86_64 systemtap-client-5.2-2.el10.x86_64 systemtap-devel-5.2-2.el10.x86_64 systemtap-runtime-5.2-2.el10.x86_64 tbb-2021.11.0-7.el10.x86_64 unzip-6.0-68.el10.x86_64 urw-base35-bookman-fonts-20200910-21.el10.noarch urw-base35-c059-fonts-20200910-21.el10.noarch urw-base35-d050000l-fonts-20200910-21.el10.noarch urw-base35-fonts-20200910-21.el10.noarch urw-base35-fonts-common-20200910-21.el10.noarch urw-base35-gothic-fonts-20200910-21.el10.noarch urw-base35-nimbus-mono-ps-fonts-20200910-21.el10.noarch urw-base35-nimbus-roman-fonts-20200910-21.el10.noarch urw-base35-nimbus-sans-fonts-20200910-21.el10.noarch urw-base35-p052-fonts-20200910-21.el10.noarch urw-base35-standard-symbols-ps-fonts-20200910-21.el10.noarch urw-base35-z003-fonts-20200910-21.el10.noarch valgrind-1:3.24.0-5.el10_0.x86_64 valgrind-devel-1:3.24.0-5.el10_0.x86_64 zip-3.0-44.el10.x86_64 zstd-1.5.5-9.el10.x86_64 Complete! Download pcre-8.45.tar.gz ... (B--2025-10-05 18:03:32-- https://parts.centminmod.com/centminmodparts/pcre/pcre-8.45.tar.gz Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:baa, 2606:4700::6812:aaa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:baa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 2096552 (2.0M) [application/x-tar] Saving to: ‘pcre-8.45.tar.gz’ 0K .......... .......... .......... .......... .......... 2% 96.6M 0s 50K .......... .......... .......... .......... .......... 4% 56.6M 0s 100K .......... .......... .......... .......... .......... 7% 60.7M 0s 150K .......... .......... .......... .......... .......... 9% 58.7M 0s 200K .......... .......... .......... .......... .......... 12% 284M 0s 250K .......... .......... .......... .......... .......... 14% 276M 0s 300K .......... .......... .......... .......... .......... 17% 258M 0s 350K .......... .......... .......... .......... .......... 19% 219M 0s 400K .......... .......... .......... .......... .......... 21% 375M 0s 450K .......... .......... .......... .......... .......... 24% 219M 0s 500K .......... .......... .......... .......... .......... 26% 276M 0s 550K .......... .......... .......... .......... .......... 29% 273M 0s 600K .......... .......... .......... .......... .......... 31% 19.4M 0s 650K .......... .......... .......... .......... .......... 34% 284M 0s 700K .......... .......... .......... .......... .......... 36% 309M 0s 750K .......... .......... .......... .......... .......... 39% 272M 0s 800K .......... .......... .......... .......... .......... 41% 261M 0s 850K .......... .......... .......... .......... .......... 43% 236M 0s 900K .......... .......... .......... .......... .......... 46% 307M 0s 950K .......... .......... .......... .......... .......... 48% 297M 0s 1000K .......... .......... .......... .......... .......... 51% 275M 0s 1050K .......... .......... .......... .......... .......... 53% 58.0M 0s 1100K .......... .......... .......... .......... .......... 56% 251M 0s 1150K .......... .......... .......... .......... .......... 58% 279M 0s 1200K .......... .......... .......... .......... .......... 61% 286M 0s 1250K .......... .......... .......... .......... .......... 63% 275M 0s 1300K .......... .......... .......... .......... .......... 65% 213M 0s 1350K .......... .......... .......... .......... .......... 68% 289M 0s 1400K .......... .......... .......... .......... .......... 70% 271M 0s 1450K .......... .......... .......... .......... .......... 73% 264M 0s 1500K .......... .......... .......... .......... .......... 75% 308M 0s 1550K .......... .......... .......... .......... .......... 78% 284M 0s 1600K .......... .......... .......... .......... .......... 80% 276M 0s 1650K .......... .......... .......... .......... .......... 83% 281M 0s 1700K .......... .......... .......... .......... .......... 85% 24.9M 0s 1750K .......... .......... .......... .......... .......... 87% 25.2M 0s 1800K .......... .......... .......... .......... .......... 90% 285M 0s 1850K .......... .......... .......... .......... .......... 92% 84.9M 0s 1900K .......... .......... .......... .......... .......... 95% 284M 0s 1950K .......... .......... .......... .......... .......... 97% 301M 0s 2000K .......... .......... .......... .......... ....... 100% 264M=0.02s 2025-10-05 18:03:32 (121 MB/s) - ‘pcre-8.45.tar.gz’ saved [2096552/2096552] Download done. (Bpcre-8.45.tar.gz valid file. (B checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for ar... ar checking the archiver (ar) interface... ar checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for g++... g++ checking whether the compiler supports GNU C++... yes checking whether g++ accepts -g... yes checking for g++ option to enable C++11 features... none needed checking dependency style of g++... gcc3 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for int64_t... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B checking the name lister (/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /bin/ld -m elf_x86_64 checking if the linker (/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether ln -s works... yes checking whether the -Werror option is usable... yes checking for simple visibility declarations... yes checking for egrep... (cached) /bin/grep -E checking for limits.h... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for dirent.h... yes checking for windows.h... no checking for alias support in the linker... no checking for alias support in the linker... no checking for string... yes checking for bits/type_traits.h... no checking for type_traits.h... no checking for strtoq... yes checking for long long... yes checking for unsigned long long... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for bcopy... yes checking for memmove... yes checking for strerror... yes checking for zlib.h... yes checking for gzopen in -lz... yes checking for bzlib.h... yes checking for libbz2... yes checking for readline/readline.h... no checking for readline/history.h... no checking for readline in -lreadline... no checking for readline in -lreadline... no checking for readline in -lreadline... no checking for readline in -lreadline... no checking for readline in -lreadline... no checking for readline in -lreadline... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes ** Cannot --enable-pcretest-readline because readline/readline.h was not found. make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. betainstaller83.sh: line 1631: /usr/local/bin/pcre-config: No such file or directory betainstaller83.sh: line 1636: /usr/local/bin/wget: No such file or directory Download wget-1.20.3.tar.gz ... (B--2025-10-05 18:03:35-- https://parts.centminmod.com/centminmodparts/wget/wget-1.20.3.tar.gz Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:baa, 2606:4700::6812:aaa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:baa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 4489249 (4.3M) [application/x-tar] Saving to: ‘wget-1.20.3.tar.gz’ 0K .......... .......... .......... .......... .......... 1% 37.6M 0s 50K .......... .......... .......... .......... .......... 2% 53.7M 0s 100K .......... .......... .......... .......... .......... 3% 180M 0s 150K .......... .......... .......... .......... .......... 4% 108M 0s 200K .......... .......... .......... .......... .......... 5% 209M 0s 250K .......... .......... .......... .......... .......... 6% 249M 0s 300K .......... .......... .......... .......... .......... 7% 278M 0s 350K .......... .......... .......... .......... .......... 9% 304M 0s 400K .......... .......... .......... .......... .......... 10% 287M 0s 450K .......... .......... .......... .......... .......... 11% 244M 0s 500K .......... .......... .......... .......... .......... 12% 267M 0s 550K .......... .......... .......... .......... .......... 13% 269M 0s 600K .......... .......... .......... .......... .......... 14% 297M 0s 650K .......... .......... .......... .......... .......... 15% 207M 0s 700K .......... .......... .......... .......... .......... 17% 271M 0s 750K .......... .......... .......... .......... .......... 18% 281M 0s 800K .......... .......... .......... .......... .......... 19% 269M 0s 850K .......... .......... .......... .......... .......... 20% 272M 0s 900K .......... .......... .......... .......... .......... 21% 235M 0s 950K .......... .......... .......... .......... .......... 22% 288M 0s 1000K .......... .......... .......... .......... .......... 23% 287M 0s 1050K .......... .......... .......... .......... .......... 25% 274M 0s 1100K .......... .......... .......... .......... .......... 26% 254M 0s 1150K .......... .......... .......... .......... .......... 27% 244M 0s 1200K .......... .......... .......... .......... .......... 28% 290M 0s 1250K .......... .......... .......... .......... .......... 29% 275M 0s 1300K .......... .......... .......... .......... .......... 30% 283M 0s 1350K .......... .......... .......... .......... .......... 31% 274M 0s 1400K .......... .......... .......... .......... .......... 33% 168M 0s 1450K .......... .......... .......... .......... .......... 34% 290M 0s 1500K .......... .......... .......... .......... .......... 35% 282M 0s 1550K .......... .......... .......... .......... .......... 36% 250M 0s 1600K .......... .......... .......... .......... .......... 37% 266M 0s 1650K .......... .......... .......... .......... .......... 38% 271M 0s 1700K .......... .......... .......... .......... .......... 39% 282M 0s 1750K .......... .......... .......... .......... .......... 41% 260M 0s 1800K .......... .......... .......... .......... .......... 42% 266M 0s 1850K .......... .......... .......... .......... .......... 43% 283M 0s 1900K .......... .......... .......... .......... .......... 44% 269M 0s 1950K .......... .......... .......... .......... .......... 45% 207M 0s 2000K .......... .......... .......... .......... .......... 46% 196M 0s 2050K .......... .......... .......... .......... .......... 47% 282M 0s 2100K .......... .......... .......... .......... .......... 49% 268M 0s 2150K .......... .......... .......... .......... .......... 50% 280M 0s 2200K .......... .......... .......... .......... .......... 51% 275M 0s 2250K .......... .......... .......... .......... .......... 52% 285M 0s 2300K .......... .......... .......... .......... .......... 53% 290M 0s 2350K .......... .......... .......... .......... .......... 54% 228M 0s 2400K .......... .......... .......... .......... .......... 55% 284M 0s 2450K .......... .......... .......... .......... .......... 57% 271M 0s 2500K .......... .......... .......... .......... .......... 58% 284M 0s 2550K .......... .......... .......... .......... .......... 59% 257M 0s 2600K .......... .......... .......... .......... .......... 60% 282M 0s 2650K .......... .......... .......... .......... .......... 61% 281M 0s 2700K .......... .......... .......... .......... .......... 62% 271M 0s 2750K .......... .......... .......... .......... .......... 63% 225M 0s 2800K .......... .......... .......... .......... .......... 65% 283M 0s 2850K .......... .......... .......... .......... .......... 66% 287M 0s 2900K .......... .......... .......... .......... .......... 67% 289M 0s 2950K .......... .......... .......... .......... .......... 68% 276M 0s 3000K .......... .......... .......... .......... .......... 69% 258M 0s 3050K .......... .......... .......... .......... .......... 70% 291M 0s 3100K .......... .......... .......... .......... .......... 71% 302M 0s 3150K .......... .......... .......... .......... .......... 72% 223M 0s 3200K .......... .......... .......... .......... .......... 74% 268M 0s 3250K .......... .......... .......... .......... .......... 75% 272M 0s 3300K .......... .......... .......... .......... .......... 76% 289M 0s 3350K .......... .......... .......... .......... .......... 77% 298M 0s 3400K .......... .......... .......... .......... .......... 78% 277M 0s 3450K .......... .......... .......... .......... .......... 79% 284M 0s 3500K .......... .......... .......... .......... .......... 80% 271M 0s 3550K .......... .......... .......... .......... .......... 82% 209M 0s 3600K .......... .......... .......... .......... .......... 83% 296M 0s 3650K .......... .......... .......... .......... .......... 84% 288M 0s 3700K .......... .......... .......... .......... .......... 85% 300M 0s 3750K .......... .......... .......... .......... .......... 86% 304M 0s 3800K .......... .......... .......... .......... .......... 87% 269M 0s 3850K .......... .......... .......... .......... .......... 88% 283M 0s 3900K .......... .......... .......... .......... .......... 90% 280M 0s 3950K .......... .......... .......... .......... .......... 91% 224M 0s 4000K .......... .......... .......... .......... .......... 92% 305M 0s 4050K .......... .......... .......... .......... .......... 93% 265M 0s 4100K .......... .......... .......... .......... .......... 94% 267M 0s 4150K .......... .......... .......... .......... .......... 95% 275M 0s 4200K .......... .......... .......... .......... .......... 96% 281M 0s 4250K .......... .......... .......... .......... .......... 98% 297M 0s 4300K .......... .......... .......... .......... .......... 99% 295M 0s 4350K .......... .......... .......... .... 100% 198M=0.02s 2025-10-05 18:03:35 (234 MB/s) - ‘wget-1.20.3.tar.gz’ saved [4489249/4489249] Download done. (Bwget-1.20.3.tar.gz valid file. (B There seems to be no Makefile in this directory. You must run ./configure before running 'make'. make: *** [GNUmakefile:108: abort-due-to-no-makefile] Error 1 configure: configuring for GNU Wget 1.20.3 checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking dependency style of gcc... gcc3 checking for library containing dlopen... none required checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for Minix Amsterdam compiler... no checking for ar... ar checking for ranlib... ranlib checking for _LARGEFILE_SOURCE value needed for large files... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for a Python interpreter with version >= 3.0... python checking for python... /bin/python checking for python version... 3.1 checking for python platform... linux checking for python script directory... ${prefix}/lib/python3.12/site-packages checking for python extension module directory... ${exec_prefix}/lib64/python3.12/site-packages checking whether NLS is requested... yes checking for msgfmt... /bin/msgfmt checking for gmsgfmt... /bin/msgfmt checking for xgettext... /bin/xgettext checking for msgmerge... /bin/msgmerge checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking for the common suffixes of directories in the library search path... lib64,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for ranlib... (cached) ranlib checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for working volatile... yes checking for ANSI C header files... (cached) yes checking for special C compiler options needed for large files... (cached) no checking for _FILE_OFFSET_BITS value needed for large files... (cached) no checking size of off_t... 8 checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for unistd.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking sys/utime.h usability... no checking sys/utime.h presence... no checking for sys/utime.h... no checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking whether h_errno is declared... yes checking size of short... 2 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of void *... 8 checking for size_t... yes checking for pid_t... yes checking for uint32_t... yes checking for uintptr_t... yes checking for intptr_t... yes checking for int64_t... yes checking for sig_atomic_t... yes checking for iconv... yes checking for working iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for sys/socket.h... yes checking for arpa/inet.h... yes checking for features.h... yes checking for unistd.h... (cached) yes checking for fnmatch.h... yes checking for wctype.h... yes checking for sys/stat.h... (cached) yes checking for netdb.h... yes checking for netinet/in.h... yes checking for getopt.h... yes checking for sys/cdefs.h... yes checking for stdio_ext.h... yes checking for termios.h... (cached) yes checking for sys/time.h... (cached) yes checking for iconv.h... yes checking for limits.h... yes checking for wchar.h... (cached) yes checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for crtdefs.h... no checking for langinfo.h... yes checking for xlocale.h... no checking for sys/mman.h... yes checking for sys/select.h... (cached) yes checking for sys/param.h... yes checking for malloc.h... yes checking for spawn.h... yes checking for strings.h... (cached) yes checking for sys/file.h... yes checking for sys/ioctl.h... (cached) yes checking for sys/uio.h... yes checking for sys/wait.h... yes checking for utime.h... (cached) yes checking for stdlib.h... (cached) yes checking whether the preprocessor supports include_next... yes checking whether system header files limit the line length... no checking whether is self-contained... yes checking for shutdown... yes checking whether defines the SHUT_* macros... yes checking for struct sockaddr_storage... yes checking for sa_family_t... yes checking for struct sockaddr_storage.ss_family... yes checking for working alloca.h... yes checking for alloca... yes checking for C/C++ restrict keyword... __restrict checking whether uses 'inline' correctly... yes checking for btowc... yes checking for _set_invalid_parameter_handler... no checking for fcntl... yes checking for symlink... yes checking for flock... yes checking for fnmatch... yes checking for isblank... yes checking for iswctype... yes checking for mbsrtowcs... yes checking for mempcpy... yes checking for wmemchr... yes checking for wmemcpy... yes checking for wmempcpy... yes checking for fpurge... no checking for __fpurge... yes checking for __freading... yes checking for futimens... yes checking for getdelim... yes checking for getdtablesize... yes checking for getpass... yes checking for __fsetlocking... yes checking for getprogname... no checking for getexecname... no checking for gettimeofday... yes checking for iswcntrl... yes checking for iswblank... yes checking for link... yes checking for lstat... yes checking for mbsinit... yes checking for mbrtowc... yes checking for mprotect... yes checking for mkostemp... yes checking for mkstemp... yes checking for tzset... yes checking for nl_langinfo... yes checking for pipe... yes checking for pipe2... yes checking for secure_getenv... yes checking for getuid... yes checking for geteuid... yes checking for getgid... yes checking for getegid... yes checking for sigaction... yes checking for sigaltstack... yes checking for siginterrupt... yes checking for snprintf... yes checking for strdup... yes checking for strerror_r... yes checking for __xpg_strerror_r... yes checking for catgets... yes checking for strndup... yes checking for strptime... yes checking for localtime_r... yes checking for timegm... yes checking for utime... yes checking for futimes... yes checking for futimesat... yes checking for utimensat... yes checking for lutimes... yes checking for vasnprintf... no checking for wcrtomb... yes checking for wcwidth... yes checking for nl_langinfo and CODESET... yes checking for a traditional french locale... none checking whether linux/if_alg.h has struct sockaddr_alg.... yes checking whether byte ordering is bigendian... no checking whether // is distinct from /... no checking if environ is properly declared... yes checking for complete errno.h... yes checking whether strerror_r is declared... yes checking for strerror_r... (cached) yes checking whether strerror_r returns char *... yes checking for sig_atomic_t... (cached) yes checking for working fcntl.h... yes checking for mode_t... yes checking for mbstate_t... yes checking whether stdin defaults to large file offsets... yes checking whether fseeko is declared... yes checking for fseeko... yes checking whether fflush works on input streams... no checking whether stat file-mode macros are broken... no checking for nlink_t... yes checking whether ftello is declared... yes checking for ftello... yes checking whether ftello works... yes checking for library containing gethostbyname... none required checking for gethostbyname... yes checking for library containing getservbyname... none required checking for getservbyname... yes checking for library containing inet_ntop... none required checking whether inet_ntop is declared... yes checking for IPv4 sockets... yes checking for IPv6 sockets... yes checking whether getdelim is declared... yes checking whether getdtablesize is declared... yes checking for uid_t in sys/types.h... yes checking type of array argument to getgroups... gid_t checking whether getline is declared... yes checking for getopt.h... (cached) yes checking for getopt_long_only... yes checking whether getopt is POSIX compatible... yes checking for working GNU getopt function... yes checking for working GNU getopt_long function... yes checking whether fflush_unlocked is declared... yes checking whether flockfile is declared... yes checking whether fputs_unlocked is declared... yes checking whether funlockfile is declared... yes checking whether putc_unlocked is declared... yes checking for struct timeval... yes checking for wide-enough struct timeval.tv_sec member... yes checking whether limits.h has LLONG_MAX, WORD_BIT, ULLONG_WIDTH etc.... yes checking for wint_t... yes checking whether wint_t is too small... no checking for unsigned long long int... yes checking for long long int... yes checking whether stdint.h conforms to C99... yes checking whether stdint.h predates C++11... no checking whether stdint.h has UINTMAX_WIDTH etc.... yes checking for inttypes.h... (cached) yes checking whether the inttypes.h PRIxNN macros are broken... no checking whether iswcntrl works... yes checking for towlower... yes checking for wctype_t... yes checking for wctrans_t... yes checking whether included libunistring is requested... no checking for libunistring... no, consider installing GNU libunistring checking for wchar_t... yes checking for good max_align_t... yes checking whether NULL can be used in arbitrary expressions... yes checking whether imported symbols can be declared weak... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_kill in -lpthread... yes checking for multithread API to use... posix checking whether lstat correctly handles trailing slash... yes checking for a sed that does not truncate output... /bin/sed checking whether malloc, realloc, calloc are POSIX compliant... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for a traditional japanese locale... none checking for a transitional chinese locale... none checking for a french Unicode locale... none checking for mmap... yes checking for MAP_ANONYMOUS... yes checking whether memchr works... yes checking whether memrchr is declared... yes checking whether defines MIN and MAX... no checking whether defines MIN and MAX... yes checking whether time_t is signed... yes checking whether alarm is declared... yes checking for working mktime... yes checking whether is self-contained... yes checking for library containing setsockopt... none needed checking whether select supports a 0 argument... yes checking whether select detects invalid fds... yes checking for O_CLOEXEC... yes checking for promoted mode_t type... mode_t checking for library containing posix_spawn... none required checking for posix_spawn... yes checking whether posix_spawn works... yes checking whether posix_spawnattr_setschedpolicy is supported... yes checking whether posix_spawnattr_setschedparam is supported... yes checking for sigset_t... yes checking for SIGPIPE... yes checking whether we are using the GNU C Library >= 2.1 or uClibc... yes checking whether C symbols are prefixed with underscore at the linker level... no checking whether snprintf returns a byte count as in C99... yes checking whether snprintf is declared... yes checking whether strdup is declared... yes checking whether strerror(0) succeeds... yes checking for strerror_r with POSIX signature... no checking whether __xpg_strerror_r works... yes checking whether strerror_r is declared... (cached) yes checking whether strndup is declared... yes checking whether strnlen is declared... yes checking for struct tm.tm_gmtoff... yes checking whether strtok_r is declared... yes checking for struct timespec in ... yes checking whether clearerr_unlocked is declared... yes checking whether feof_unlocked is declared... yes checking whether ferror_unlocked is declared... yes checking whether fgets_unlocked is declared... yes checking whether fputc_unlocked is declared... yes checking whether fread_unlocked is declared... yes checking whether fwrite_unlocked is declared... yes checking whether getc_unlocked is declared... yes checking whether getchar_unlocked is declared... yes checking whether putchar_unlocked is declared... yes checking whether the utimes function works... yes checking for inttypes.h... yes checking for stdint.h... yes checking for intmax_t... yes checking where to find the exponent in a 'double'... word 1 bit 20 checking for snprintf... (cached) yes checking for strnlen... yes checking for wcslen... yes checking for wcsnlen... yes checking for mbrtowc... (cached) yes checking for wcrtomb... (cached) yes checking whether _snprintf is declared... no checking whether vsnprintf is declared... yes checking for alloca as a compiler built-in... yes checking whether btowc(0) is correct... yes checking whether btowc(EOF) is correct... guessing yes checking for __builtin_expect... yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for library containing clock_gettime... none required checking for clock_gettime... yes checking for clock_settime... yes checking whether // is distinct from /... (cached) no checking whether dup2 works... yes checking for error_at_line... yes checking whether fcntl handles F_DUPFD correctly... yes checking whether fcntl understands F_DUPFD_CLOEXEC... needs runtime check checking whether fflush works on input streams... (cached) no checking for flexible array member... yes checking whether conversion from 'int' to 'long double' works... yes checking for working POSIX fnmatch... yes checking whether fopen recognizes a trailing slash... yes checking whether fpurge is declared... no checking for fseeko... (cached) yes checking whether fflush works on input streams... (cached) no checking for _fseeki64... no checking for ftello... (cached) yes checking whether ftello works... (cached) yes checking whether futimens works... yes checking how to do getaddrinfo, freeaddrinfo and getnameinfo... checking for library containing getaddrinfo... none required checking for getaddrinfo... yes checking whether gai_strerror is declared... yes checking whether gai_strerrorA is declared... no checking for gai_strerror with POSIX signature... yes checking for struct sockaddr.sa_len... no checking whether getaddrinfo is declared... yes checking whether freeaddrinfo is declared... yes checking whether getnameinfo is declared... yes checking for struct addrinfo... yes checking for working getdelim function... yes checking whether getdtablesize works... yes checking for getgroups... yes checking for working getgroups... yes checking whether getgroups handles negative values... yes checking for getline... yes checking for working getline function... yes checking for getpass without length limitations... yes checking whether program_invocation_name is declared... yes checking whether program_invocation_short_name is declared... yes checking whether __argv is declared... no checking whether gettimeofday clobbers localtime buffer... no checking for gettimeofday with POSIX signature... yes checking for group_member... yes checking for library containing gethostbyname... (cached) none required checking for gethostbyname... (cached) yes checking for library containing inet_ntop... (cached) none required checking whether inet_ntop is declared... (cached) yes checking whether the compiler generally respects inline... yes checking whether INT32_MAX < INTMAX_MAX... yes checking whether INT64_MAX == LONG_MAX... yes checking whether UINT32_MAX < UINTMAX_MAX... yes checking whether UINT64_MAX == ULONG_MAX... yes checking for ioctl... yes checking for ioctl with POSIX signature... no checking whether iswblank is declared... yes checking whether langinfo.h defines CODESET... yes checking whether langinfo.h defines T_FMT_AMPM... yes checking whether langinfo.h defines ALTMON_1... yes checking whether langinfo.h defines ERA... yes checking whether langinfo.h defines YESEXPR... yes checking whether the compiler supports the __inline keyword... yes checking whether to use the included libunistring... yes checking whether link obeys POSIX... yes checking whether locale.h conforms to POSIX:2001... yes checking whether struct lconv is properly defined... yes checking for pthread_rwlock_t... yes checking whether pthread_rwlock_rdlock prefers a writer to a reader... no checking whether lseek detects pipes... yes checking whether mbrtowc handles incomplete characters... guessing yes checking whether mbrtowc works as well as mbtowc... guessing yes checking whether mbrtowc handles a NULL pwc argument... guessing yes checking whether mbrtowc handles a NULL string argument... guessing yes checking whether mbrtowc has a correct return value... guessing yes checking whether mbrtowc returns 0 when parsing a NUL character... guessing yes checking whether mbrtowc works on empty input... yes checking whether the C locale is free of encoding errors... no checking whether mbrtowc handles incomplete characters... (cached) guessing yes checking whether mbrtowc works as well as mbtowc... (cached) guessing yes checking whether mbrtowc handles incomplete characters... (cached) guessing yes checking whether mbrtowc works as well as mbtowc... (cached) guessing yes checking whether mbsrtowcs works... guessing yes checking for mbtowc... yes checking for memrchr... yes checking whether mkdir handles trailing slash... yes checking whether mkdir handles trailing dot... yes checking for working mkstemp... yes checking for __mktime_internal... no checking for library containing nanosleep... none required checking for working nanosleep... no (mishandles large arguments) checking whether is self-contained... yes checking whether YESEXPR works... yes checking whether open recognizes a trailing slash... yes checking whether posix_spawn_file_actions_addclose works... yes checking whether posix_spawn_file_actions_adddup2 works... yes checking whether posix_spawn_file_actions_addopen works... yes checking for raise... yes checking for sigprocmask... yes checking for rawmemchr... yes checking for working re_compile_pattern... no checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking whether isblank is declared... yes checking whether select supports a 0 argument... (cached) yes checking whether select detects invalid fds... (cached) yes checking for library containing getservbyname... (cached) none required checking for getservbyname... (cached) yes checking for struct sigaction.sa_sigaction... yes checking for volatile sig_atomic_t... yes checking for sighandler_t... yes checking for sigprocmask... (cached) yes checking for stdint.h... (cached) yes checking for SIZE_MAX... yes checking for snprintf... (cached) yes checking whether snprintf respects a size of 1... yes checking whether printf supports POSIX/XSI format strings with positions... yes checking for socklen_t... yes checking for posix_spawnattr_t... yes checking for posix_spawn_file_actions_t... yes checking for ssize_t... yes checking whether stat handles trailing slashes on files... yes checking for struct stat.st_atim.tv_nsec... yes checking whether struct stat.st_atim is of type struct timespec... yes checking for struct stat.st_birthtimespec.tv_nsec... no checking for struct stat.st_birthtimensec... no checking for struct stat.st_birthtim.tv_nsec... no checking for working stdalign.h... yes checking for good max_align_t... (cached) yes checking whether NULL can be used in arbitrary expressions... (cached) yes checking which flavor of printf attribute matches inttypes macros... system checking for strcasecmp... yes checking for strncasecmp... yes checking whether strncasecmp is declared... yes checking for strchrnul... yes checking whether strchrnul works... yes checking for working strerror function... yes checking for working strndup... yes checking for working strnlen... yes checking for strpbrk... yes checking for strtok_r... yes checking whether strtok_r works... yes checking for strtol... yes checking for strtoll... yes checking whether symlink handles trailing slash correctly... yes checking whether declares ioctl... yes checking for nlink_t... (cached) yes checking whether localtime_r is declared... yes checking whether localtime_r is compatible with its POSIX signature... yes checking whether unlink honors trailing slashes... yes checking whether unlink of a parent directory fails as it should... guessing yes checking for ptrdiff_t... yes checking for vasprintf... yes checking for vsnprintf... yes checking whether snprintf respects a size of 1... (cached) yes checking whether printf supports POSIX/XSI format strings with positions... (cached) yes checking for waitid... yes checking whether mbrtowc handles incomplete characters... (cached) guessing yes checking whether mbrtowc works as well as mbtowc... (cached) guessing yes checking whether wcrtomb works in the C locale... yes checking whether wcrtomb return value is correct... guessing yes checking whether iswcntrl works... (cached) yes checking for towlower... (cached) yes checking for wctype_t... (cached) yes checking for wctrans_t... (cached) yes checking whether wcwidth is declared... yes checking whether wcwidth works reasonably in UTF-8 locales... yes checking for stdint.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking for _LARGEFILE_SOURCE value needed for large files... (cached) no checking for strptime... (cached) yes checking for timegm... (cached) yes checking for vsnprintf... (cached) yes checking for vasprintf... (cached) yes checking for drand48... yes checking for pathconf... yes checking for strtoll... (cached) yes checking for usleep... yes checking for ftello... yes checking for sigblock... yes checking for sigsetjmp... no checking for memrchr... (cached) yes checking for wcwidth... (cached) yes checking for mbtowc... (cached) yes checking for sleep... yes checking for symlink... (cached) yes checking for utime... (cached) yes checking for strlcpy... yes checking for random... yes checking for fmemopen... yes checking for pkg-config... /bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBPSL... yes checking for psl_latest... yes checking for ZLIB... yes checking for OPENSSL... yes configure: compiling in support for SSL via OpenSSL checking for RAND_egd... no checking for INET6 protocol support... yes checking for struct sockaddr_in6... yes checking for struct sockaddr_storage... (cached) yes checking for struct sockaddr_in6.sin6_scope_id... yes configure: Enabling support for IPv6. checking for makeinfo... ${SHELL} /svr-setup/wget-1.20.3/build-aux/missing makeinfo checking for perl5... no checking for perl... /bin/perl checking for pod2man... /bin/pod2man checking for library containing idn2_lookup_u8... -lidn2 checking uuid.h usability... no checking uuid.h presence... no checking for uuid.h... no checking uuid/uuid.h usability... yes checking uuid/uuid.h presence... yes checking for uuid/uuid.h... yes checking for library containing uuid_generate... -luuid checking for PCRE2... yes checking for gpgme-config... no checking for METALINK... no checking for fsetxattr... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating util/Makefile config.status: creating po/Makefile.in config.status: creating tests/Makefile config.status: creating fuzz/Makefile config.status: creating lib/Makefile config.status: creating testenv/Makefile config.status: creating tests/certs/interca.conf config.status: creating tests/certs/rootca.conf config.status: creating src/config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile configure: Summary of build options: Version: 1.20.3 Host OS: linux-gnu Install prefix: /usr/local Compiler: gcc CFlags: -I /usr/include -DHAVE_LIBSSL -DWITH_GZFILEOP -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic LDFlags: Libs: -lpcre2-8 -luuid -lidn2 -L /usr/lib64 -lssl -lcrypto -lz -lpsl SSL: openssl Zlib: yes PSL: yes PCRE: yes, via libpcre2 Digest: yes NTLM: yes OPIE: yes POSIX xattr: yes Debugging: yes Assertions: no Valgrind: Valgrind testing not enabled Metalink: no Resolver: libc, --bind-dns-address and --dns-servers not available GPGME: no IRI: yes Fuzzing build: no, make all-recursive make[1]: Entering directory '/svr-setup/wget-1.20.3' Making all in lib make[2]: Entering directory '/svr-setup/wget-1.20.3/lib' GEN alloca.h GEN fcntl.h GEN arpa/inet.h GEN inttypes.h GEN langinfo.h GEN limits.h GEN locale.h GEN netdb.h GEN signal.h GEN spawn.h GEN stdio.h GEN stdlib.h GEN string.h GEN strings.h GEN sys/file.h GEN sys/ioctl.h GEN sys/select.h GEN sys/socket.h GEN sys/stat.h GEN sys/time.h GEN sys/types.h GEN time.h GEN sys/uio.h GEN sys/wait.h GEN unicase.h GEN unicase/special-casing.h GEN unictype.h GEN uninorm.h GEN unistr.h GEN unistd.h GEN unitypes.h GEN uniwidth.h GEN wchar.h GEN wctype.h make all-recursive make[3]: Entering directory '/svr-setup/wget-1.20.3/lib' make[4]: Entering directory '/svr-setup/wget-1.20.3/lib' CC base32.o CC c-ctype.o CC binary-io.o CC c-strcasecmp.o CC c-strncasecmp.o CC c-strcasestr.o CC cloexec.o CC af_alg.o CC md2.o CC md4.o CC md5.o CC sha1.o CC sha256.o CC sha512.o CC dirname.o CC basename.o CC dirname-lgpl.o CC basename-lgpl.o CC stripslash.o CC exitfail.o CC fatal-signal.o CC fd-hook.o CC fd-safer-flag.o CC dup-safer-flag.o CC freading.o CC getprogname.o CC gettime.o CC hard-locale.o CC localcharset.o CC malloca.o CC mbchar.o CC mbiter.o CC pipe2.o CC pipe2-safer.o CC quotearg.o CC sig-handler.o CC sockets.o CC spawn-pipe.o CC stat-time.o CC strnlen1.o CC sys_socket.o CC tempname.o CC glthread/threadlib.o CC timespec.o CC tmpdir.o CC u64.o CC unistd.o CC dup-safer.o CC fd-safer.o CC pipe-safer.o CC utimens.o CC wait-process.o CC wctype-h.o utimens.c: In function 'fdutimens': utimens.c:382:17: warning: 'update_timespec' accessing 16 bytes in a region of size 8 [-Wstringop-overflow=] 382 | if (ts && update_timespec (&st, &ts)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ utimens.c:382:17: note: referencing argument 2 of type 'struct timespec *[2]' utimens.c:133:1: note: in a call to function 'update_timespec' 133 | update_timespec (struct stat const *statbuf, struct timespec *ts[2]) | ^~~~~~~~~~~~~~~ utimens.c: In function 'lutimens': utimens.c:595:17: warning: 'update_timespec' accessing 16 bytes in a region of size 8 [-Wstringop-overflow=] 595 | if (ts && update_timespec (&st, &ts)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ utimens.c:595:17: note: referencing argument 2 of type 'struct timespec *[2]' utimens.c:133:1: note: in a call to function 'update_timespec' 133 | update_timespec (struct stat const *statbuf, struct timespec *ts[2]) | ^~~~~~~~~~~~~~~ CC xmalloc.o CC xalloc-die.o CC xsize.o CC xstrndup.o CC asnprintf.o CC fcntl.o CC fflush.o CC fpurge.o CC fseek.o CC fseeko.o CC ioctl.o CC localtime-buffer.o CC mbrtowc.o CC mktime.o CC nanosleep.o CC printf-args.o CC printf-parse.o CC regex.o CC strerror_r.o CC vasnprintf.o CC xmemdup0.o CC glthread/lock.o CC unicase/cased.o CC unicase/empty-prefix-context.o CC unicase/empty-suffix-context.o CC unicase/ignorable.o CC unicase/special-casing.o CC unicase/tolower.o CC unicase/u8-casemap.o CC unicase/u8-tolower.o CC unictype/combiningclass.o CC unictype/pr_soft_dotted.o CC uninorm/decompose-internal.o CC uninorm/u8-normalize.o CC unistr/u8-cpy.o CC unistr/u8-mbtouc-unsafe.o CC unistr/u8-mbtouc-unsafe-aux.o CC unistr/u8-strlen.o CC unistr/u8-uctomb.o CC unistr/u8-uctomb-aux.o CC uniwidth/width.o AR libgnu.a make[4]: Leaving directory '/svr-setup/wget-1.20.3/lib' make[3]: Leaving directory '/svr-setup/wget-1.20.3/lib' make[2]: Leaving directory '/svr-setup/wget-1.20.3/lib' Making all in src make[2]: Entering directory '/svr-setup/wget-1.20.3/src' make all-am make[3]: Entering directory '/svr-setup/wget-1.20.3/src' CC connect.o CC convert.o CC cookies.o cookies.c: In function 'cookie_header': cookies.c:1129:12: warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 1129 | result = xmalloc (result_size); | ^~~~~~~~~~~~~~~~~~~~~ In file included from wget.h:216, from cookies.c:46: ../lib/xalloc.h:53:7: note: in a call to allocation function 'xmalloc' declared here 53 | void *xmalloc (size_t s) | ^~~~~~~ CC ftp.o CC css_.o CC css-url.o CC ftp-basic.o CC ftp-ls.o CC hash.o CC host.o CC hsts.o hsts.c: In function 'hsts_store_save': hsts.c:578:11: warning: ignoring return value of 'ftruncate' declared with attribute 'warn_unused_result' [-Wunused-result] 578 | ftruncate (fd, 0); | ^~~~~~~~~~~~~~~~~ CC html-parse.o CC html-url.o CC http.o CC init.o CC log.o In function 'setval_internal_tilde', inlined from 'run_wgetrc' at init.c:693:16: init.c:912:17: warning: array subscript [0, 167] is outside array bounds of 'const struct [168]' [-Warray-bounds=] 912 | if (((commands[comind].action == cmd_file) || | ~~~~~~~~^~~~~~~~ init.c: In function 'run_wgetrc': init.c:133:3: note: while referencing 'commands' 133 | } commands[] = { | ^~~~~~~~ CC main.o CC netrc.o CC progress.o progress.c: In function 'eta_to_human_short': progress.c:1268:20: warning: '%d' directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=] 1268 | sprintf (buf, "%ds", secs); | ^~ progress.c:1268:19: note: directive argument in the range [-2147483648, 99] 1268 | sprintf (buf, "%ds", secs); | ^~~~~ In file included from /usr/include/stdio.h:980, from ../lib/stdio.h:43, from log.h:37, from wget.h:219, from progress.c:31: In function 'sprintf', inlined from 'eta_to_human_short' at progress.c:1268:5: /usr/include/bits/stdio2.h:30:10: note: '__builtin___sprintf_chk' output between 3 and 13 bytes into a destination of size 10 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ CC ptimer.o CC recur.o CC res.o CC retr.o CC spider.o CC url.o CC warc.o CC xattr.o CC utils.o CC exits.o CC build_info.o CC iri.o In file included from iri.c:31: iri.c: In function 'do_conversion': iri.c:159:16: warning: format '%d' expects argument of type 'int', but argument 2 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 159 | DEBUGP (("iconv outlen=%d inlen=%d\n", outlen, inlen)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~ | | | size_t {aka long unsigned int} wget.h:129:54: note: in definition of macro 'DEBUGP' 129 | #define DEBUGP(args) do { IF_DEBUG { debug_logprintf args; } } while (0) | ^~~~ iri.c:159:31: note: format string is defined here 159 | DEBUGP (("iconv outlen=%d inlen=%d\n", outlen, inlen)); | ~^ | | | int | %ld iri.c:159:16: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 159 | DEBUGP (("iconv outlen=%d inlen=%d\n", outlen, inlen)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~ | | | size_t {aka long unsigned int} wget.h:129:54: note: in definition of macro 'DEBUGP' 129 | #define DEBUGP(args) do { IF_DEBUG { debug_logprintf args; } } while (0) | ^~~~ iri.c:159:40: note: format string is defined here 159 | DEBUGP (("iconv outlen=%d inlen=%d\n", outlen, inlen)); | ~^ | | | int | %ld In file included from ../lib/gettext.h:26, from wget.h:63: iri.c:195:23: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iri.c:195:21: note: in expansion of macro '_' 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^ iri.c:195:54: note: format string is defined here 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ~^ | | | int | %ld iri.c:195:23: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iri.c:195:21: note: in expansion of macro '_' 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^ iri.c:195:64: note: format string is defined here 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ~^ | | | int | %ld iri.c:195:23: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ iri.c:195:21: note: in expansion of macro '_' 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ^ iri.c:195:73: note: format string is defined here 195 | _("Reallocate output buffer len=%d outlen=%d inlen=%d\n"), len, outlen, inlen); | ~^ | | | int | %ld echo '/* version.c */' > version.c echo '/* Autogenerated by Makefile - DO NOT EDIT */' >> version.c echo '' >> version.c echo '#include "version.h"' >> version.c echo 'const char *version_string = "1.20.3";' >> version.c echo 'const char *compilation_string = "'gcc -DHAVE_CONFIG_H -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" -DLOCALEDIR=\"/usr/local/share/locale\" -I. -I../lib -I../lib -I /usr/include -DHAVE_LIBSSL -DWITH_GZFILEOP -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic'";' \ | sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$/";/' >> version.c echo 'const char *link_string = "'gcc -I /usr/include -DHAVE_LIBSSL -DWITH_GZFILEOP -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic \ -lpcre2-8 -luuid -lidn2 -L /usr/lib64 -lssl -lcrypto -lz -lpsl ftp-opie.o openssl.o http-ntlm.o ../lib/libgnu.a '";' \ | sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$/";/' >> version.c CC ftp-opie.o CC openssl.o CC http-ntlm.o http-ntlm.c: In function 'setup_des_key': http-ntlm.c:201:3: warning: 'DES_set_odd_parity' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 201 | DES_set_odd_parity(&key); | ^~~~~~~~~~~~~~~~~~ In file included from http-ntlm.c:52: /usr/include/openssl/des.h:176:28: note: declared here 176 | OSSL_DEPRECATEDIN_3_0 void DES_set_odd_parity(DES_cblock *key); | ^~~~~~~~~~~~~~~~~~ http-ntlm.c:202:3: warning: 'DES_set_key' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 202 | DES_set_key(&key, ks); | ^~~~~~~~~~~ /usr/include/openssl/des.h:186:5: note: declared here 186 | int DES_set_key(const_DES_cblock *key, DES_key_schedule *schedule); | ^~~~~~~~~~~ http-ntlm.c: In function 'calc_resp': http-ntlm.c:229:3: warning: 'DES_ecb_encrypt' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 229 | DES_ecb_encrypt((DES_cblock*) plaintext, (DES_cblock*) results, | ^~~~~~~~~~~~~~~ /usr/include/openssl/des.h:105:6: note: declared here 105 | void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output, | ^~~~~~~~~~~~~~~ http-ntlm.c:233:3: warning: 'DES_ecb_encrypt' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 233 | DES_ecb_encrypt((DES_cblock*) plaintext, (DES_cblock*) (results+8), | ^~~~~~~~~~~~~~~ /usr/include/openssl/des.h:105:6: note: declared here 105 | void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output, | ^~~~~~~~~~~~~~~ http-ntlm.c:237:3: warning: 'DES_ecb_encrypt' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 237 | DES_ecb_encrypt((DES_cblock*) plaintext, (DES_cblock*) (results+16), | ^~~~~~~~~~~~~~~ /usr/include/openssl/des.h:105:6: note: declared here 105 | void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output, | ^~~~~~~~~~~~~~~ http-ntlm.c: In function 'mkhash': http-ntlm.c:290:5: warning: 'DES_ecb_encrypt' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 290 | DES_ecb_encrypt((DES_cblock *)magic, (DES_cblock *)lmbuffer, | ^~~~~~~~~~~~~~~ /usr/include/openssl/des.h:105:6: note: declared here 105 | void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output, | ^~~~~~~~~~~~~~~ http-ntlm.c:294:5: warning: 'DES_ecb_encrypt' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 294 | DES_ecb_encrypt((DES_cblock *)magic, (DES_cblock *)(lmbuffer+8), | ^~~~~~~~~~~~~~~ /usr/include/openssl/des.h:105:6: note: declared here 105 | void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output, | ^~~~~~~~~~~~~~~ http-ntlm.c:324:5: warning: 'MD4_Init' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 324 | MD4_Init(&MD4); | ^~~~~~~~ In file included from http-ntlm.c:53: /usr/include/openssl/md4.h:50:27: note: declared here 50 | OSSL_DEPRECATEDIN_3_0 int MD4_Init(MD4_CTX *c); | ^~~~~~~~ http-ntlm.c:325:5: warning: 'MD4_Update' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 325 | MD4_Update(&MD4, pw, 2*len); | ^~~~~~~~~~ /usr/include/openssl/md4.h:51:27: note: declared here 51 | OSSL_DEPRECATEDIN_3_0 int MD4_Update(MD4_CTX *c, const void *data, size_t len); | ^~~~~~~~~~ http-ntlm.c:326:5: warning: 'MD4_Final' is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 326 | MD4_Final(ntbuffer, &MD4); | ^~~~~~~~~ /usr/include/openssl/md4.h:52:27: note: declared here 52 | OSSL_DEPRECATEDIN_3_0 int MD4_Final(unsigned char *md, MD4_CTX *c); | ^~~~~~~~~ CC version.o openssl.c: In function 'ssl_init': openssl.c:178:7: warning: 'OPENSSL_config' is deprecated: Since OpenSSL 1.1.0 [-Wdeprecated-declarations] 178 | OPENSSL_config (NULL); | ^~~~~~~~~~~~~~ In file included from /usr/include/openssl/http.h:19, from /usr/include/openssl/x509.h:563, from /usr/include/openssl/ssl.h:32, from openssl.c:40: /usr/include/openssl/conf.h:135:30: note: declared here 135 | OSSL_DEPRECATEDIN_1_1_0 void OPENSSL_config(const char *config_name); | ^~~~~~~~~~~~~~ CCLD wget make[3]: Leaving directory '/svr-setup/wget-1.20.3/src' make[2]: Leaving directory '/svr-setup/wget-1.20.3/src' Making all in doc make[2]: Entering directory '/svr-setup/wget-1.20.3/doc' ./texi2pod.pl -D VERSION="1.20.3" ./wget.texi wget.pod /bin/pod2man --center="GNU Wget" --release="GNU Wget 1.20.3" --utf8 wget.pod > wget.1 || \ /bin/pod2man --center="GNU Wget" --release="GNU Wget 1.20.3" wget.pod > wget.1 make[2]: Leaving directory '/svr-setup/wget-1.20.3/doc' Making all in po make[2]: Entering directory '/svr-setup/wget-1.20.3/po' make[2]: Leaving directory '/svr-setup/wget-1.20.3/po' Making all in util make[2]: Entering directory '/svr-setup/wget-1.20.3/util' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/svr-setup/wget-1.20.3/util' Making all in fuzz make[2]: Entering directory '/svr-setup/wget-1.20.3/fuzz' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/svr-setup/wget-1.20.3/fuzz' Making all in tests make[2]: Entering directory '/svr-setup/wget-1.20.3/tests' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/svr-setup/wget-1.20.3/tests' Making all in testenv make[2]: Entering directory '/svr-setup/wget-1.20.3/testenv' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/svr-setup/wget-1.20.3/testenv' make[2]: Entering directory '/svr-setup/wget-1.20.3' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/svr-setup/wget-1.20.3' make[1]: Leaving directory '/svr-setup/wget-1.20.3' make install-recursive make[1]: Entering directory '/svr-setup/wget-1.20.3' Making install in lib make[2]: Entering directory '/svr-setup/wget-1.20.3/lib' make install-recursive make[3]: Entering directory '/svr-setup/wget-1.20.3/lib' make[4]: Entering directory '/svr-setup/wget-1.20.3/lib' make[5]: Entering directory '/svr-setup/wget-1.20.3/lib' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/svr-setup/wget-1.20.3/lib' make[4]: Leaving directory '/svr-setup/wget-1.20.3/lib' make[3]: Leaving directory '/svr-setup/wget-1.20.3/lib' make[2]: Leaving directory '/svr-setup/wget-1.20.3/lib' Making install in src make[2]: Entering directory '/svr-setup/wget-1.20.3/src' make[3]: Entering directory '/svr-setup/wget-1.20.3/src' /bin/mkdir -p '/usr/local/bin' /bin/install -c wget '/usr/local/bin' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3/src' make[2]: Leaving directory '/svr-setup/wget-1.20.3/src' Making install in doc make[2]: Entering directory '/svr-setup/wget-1.20.3/doc' make[3]: Entering directory '/svr-setup/wget-1.20.3/doc' make[3]: Nothing to be done for 'install-exec-am'. /bin/sh /svr-setup/wget-1.20.3/build-aux/install-sh -d /usr/local/etc /bin/sh /svr-setup/wget-1.20.3/build-aux/install-sh -d /usr/local/share/man/man1 /bin/install -c -m 644 wget.1 /usr/local/share/man/man1/wget.1 /bin/mkdir -p '/usr/local/share/info' /bin/install -c -m 644 ./wget.info '/usr/local/share/info' make[3]: Leaving directory '/svr-setup/wget-1.20.3/doc' make[2]: Leaving directory '/svr-setup/wget-1.20.3/doc' Making install in po make[2]: Entering directory '/svr-setup/wget-1.20.3/po' /bin/mkdir -p /usr/local/share installing be.gmo as /usr/local/share/locale/be/LC_MESSAGES/wget.mo installing bg.gmo as /usr/local/share/locale/bg/LC_MESSAGES/wget.mo installing ca.gmo as /usr/local/share/locale/ca/LC_MESSAGES/wget.mo installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/wget.mo installing da.gmo as /usr/local/share/locale/da/LC_MESSAGES/wget.mo installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/wget.mo installing el.gmo as /usr/local/share/locale/el/LC_MESSAGES/wget.mo installing en_GB.gmo as /usr/local/share/locale/en_GB/LC_MESSAGES/wget.mo installing eo.gmo as /usr/local/share/locale/eo/LC_MESSAGES/wget.mo installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/wget.mo installing et.gmo as /usr/local/share/locale/et/LC_MESSAGES/wget.mo installing eu.gmo as /usr/local/share/locale/eu/LC_MESSAGES/wget.mo installing fi.gmo as /usr/local/share/locale/fi/LC_MESSAGES/wget.mo installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/wget.mo installing ga.gmo as /usr/local/share/locale/ga/LC_MESSAGES/wget.mo installing gl.gmo as /usr/local/share/locale/gl/LC_MESSAGES/wget.mo installing he.gmo as /usr/local/share/locale/he/LC_MESSAGES/wget.mo installing hr.gmo as /usr/local/share/locale/hr/LC_MESSAGES/wget.mo installing hu.gmo as /usr/local/share/locale/hu/LC_MESSAGES/wget.mo installing id.gmo as /usr/local/share/locale/id/LC_MESSAGES/wget.mo installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/wget.mo installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/wget.mo installing lt.gmo as /usr/local/share/locale/lt/LC_MESSAGES/wget.mo installing nb.gmo as /usr/local/share/locale/nb/LC_MESSAGES/wget.mo installing nl.gmo as /usr/local/share/locale/nl/LC_MESSAGES/wget.mo installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/wget.mo installing pt.gmo as /usr/local/share/locale/pt/LC_MESSAGES/wget.mo installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/wget.mo installing ro.gmo as /usr/local/share/locale/ro/LC_MESSAGES/wget.mo installing ru.gmo as /usr/local/share/locale/ru/LC_MESSAGES/wget.mo installing sk.gmo as /usr/local/share/locale/sk/LC_MESSAGES/wget.mo installing sl.gmo as /usr/local/share/locale/sl/LC_MESSAGES/wget.mo installing sr.gmo as /usr/local/share/locale/sr/LC_MESSAGES/wget.mo installing sv.gmo as /usr/local/share/locale/sv/LC_MESSAGES/wget.mo installing tr.gmo as /usr/local/share/locale/tr/LC_MESSAGES/wget.mo installing uk.gmo as /usr/local/share/locale/uk/LC_MESSAGES/wget.mo installing vi.gmo as /usr/local/share/locale/vi/LC_MESSAGES/wget.mo installing zh_CN.gmo as /usr/local/share/locale/zh_CN/LC_MESSAGES/wget.mo installing zh_TW.gmo as /usr/local/share/locale/zh_TW/LC_MESSAGES/wget.mo if test "wget" = "gettext-tools"; then \ /bin/mkdir -p /usr/local/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /bin/install -c -m 644 ./$file \ /usr/local/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /usr/local/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/svr-setup/wget-1.20.3/po' Making install in util make[2]: Entering directory '/svr-setup/wget-1.20.3/util' make[3]: Entering directory '/svr-setup/wget-1.20.3/util' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3/util' make[2]: Leaving directory '/svr-setup/wget-1.20.3/util' Making install in fuzz make[2]: Entering directory '/svr-setup/wget-1.20.3/fuzz' make[3]: Entering directory '/svr-setup/wget-1.20.3/fuzz' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3/fuzz' make[2]: Leaving directory '/svr-setup/wget-1.20.3/fuzz' Making install in tests make[2]: Entering directory '/svr-setup/wget-1.20.3/tests' make[3]: Entering directory '/svr-setup/wget-1.20.3/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3/tests' make[2]: Leaving directory '/svr-setup/wget-1.20.3/tests' Making install in testenv make[2]: Entering directory '/svr-setup/wget-1.20.3/testenv' make[3]: Entering directory '/svr-setup/wget-1.20.3/testenv' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3/testenv' make[2]: Leaving directory '/svr-setup/wget-1.20.3/testenv' make[2]: Entering directory '/svr-setup/wget-1.20.3' make[3]: Entering directory '/svr-setup/wget-1.20.3' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/wget-1.20.3' make[2]: Leaving directory '/svr-setup/wget-1.20.3' make[1]: Leaving directory '/svr-setup/wget-1.20.3' -------------------------------------------------------- (Bldconfig -p | grep libpcre.so.1 ldd alias wget='/usr/local/bin/wget' /usr/local/bin/wget alias: ldd: ./alias: No such file or directory wget='/usr/local/bin/wget': ldd: wget='/usr/local/bin/wget': No such file or directory /usr/local/bin/wget: linux-vdso.so.1 (0x00007f71b2255000) libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f71b21a8000) libuuid.so.1 => /lib64/libuuid.so.1 (0x00007f71b219e000) libidn2.so.0 => /lib64/libidn2.so.0 (0x00007f71b217c000) libssl.so.3 => /lib64/libssl.so.3 (0x00007f71b20a5000) libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f71b1a00000) libz.so.1 => /lib64/libz.so.1 (0x00007f71b2082000) libpsl.so.5 => /lib64/libpsl.so.5 (0x00007f71b206b000) libc.so.6 => /lib64/libc.so.6 (0x00007f71b1827000) libunistring.so.5 => /lib64/libunistring.so.5 (0x00007f71b1ebd000) /lib64/ld-linux-x86-64.so.2 (0x00007f71b2257000) -------------------------------------------------------- (Bwget -V (BGNU Wget 1.20.3 built on linux-gnu. -cares +digest -gpgme +https +ipv6 +iri +large-file -metalink +nls +ntlm +opie +psl +ssl/openssl Wgetrc: /usr/local/etc/wgetrc (system) Locale: /usr/local/share/locale Compile: gcc -DHAVE_CONFIG_H -DSYSTEM_WGETRC="/usr/local/etc/wgetrc" -DLOCALEDIR="/usr/local/share/locale" -I. -I../lib -I../lib -I /usr/include -DHAVE_LIBSSL -DWITH_GZFILEOP -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic Link: gcc -I /usr/include -DHAVE_LIBSSL -DWITH_GZFILEOP -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -lpcre2-8 -luuid -lidn2 -L /usr/lib64 -lssl -lcrypto -lz -lpsl ftp-opie.o openssl.o http-ntlm.o ../lib/libgnu.a Copyright (C) 2015 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later . This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Originally written by Hrvoje Niksic . Please send bug reports and questions to . -------------------------------------------------------- (Bwget 1.20.3 installed at /usr/local/bin/wget (B-------------------------------------------------------- (B Download axel-2.6.tar.gz ... --2025-10-05 18:04:08-- https://parts.centminmod.com/centminmodparts/axel/v2.6.tar.gz Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:baa, 2606:4700::6812:aaa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:baa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 266229 (260K) [application/x-tar] Saving to: ‘axel-2.6.tar.gz’ 0K .......... .......... .......... .......... .......... 19% 86.9M 0s 50K .......... .......... .......... .......... .......... 38% 45.5M 0s 100K .......... .......... .......... .......... .......... 57% 34.7M 0s 150K .......... .......... .......... .......... .......... 76% 166M 0s 200K .......... .......... .......... .......... .......... 96% 114M 0s 250K ......... 100% 148M=0.004s 2025-10-05 18:04:08 (66.3 MB/s) - ‘axel-2.6.tar.gz’ saved [266229/266229] Download axel-2.6.tar.gz done. axel-2.6.tar.gz valid file. checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for gettext... gettext checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for size_t... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memset... yes checking for select... yes checking for setlocale... yes checking for socket... yes checking for strcasecmp... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for a sed that does not truncate output... /bin/sed checking whether NLS is requested... yes checking for msgfmt... /bin/msgfmt checking for gmsgfmt... /bin/msgfmt checking for xgettext... /bin/xgettext checking for msgmerge... /bin/msgmerge checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile make all-recursive make[1]: Entering directory '/svr-setup/axel-2.6' Making all in src make[2]: Entering directory '/svr-setup/axel-2.6/src' gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT axel.o -MD -MP -MF .deps/axel.Tpo -c -o axel.o axel.c axel.c: In function ‘save_state’: axel.c:521:38: warning: ‘.st’ directive output may be truncated writing 3 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 521 | snprintf( fn, MAX_STRING, "%s.st", axel->filename ); | ^~~ In file included from /usr/include/stdio.h:980, from axel.h:32, from axel.c:27: In function ‘snprintf’, inlined from ‘save_state’ at axel.c:521:2: /usr/include/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 4 and 1027 bytes into a destination of size 1024 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ axel.c: In function ‘axel_new’: axel.c:77:25: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 77 | strncpy( u->text, res[i].url, MAX_STRING ); | ^ axel.c:69:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 69 | strncpy( axel->url->text, (char *) url, MAX_STRING ); | ^ axel.c:104:17: warning: ‘__builtin_strncpy’ output may be truncated copying 1024 bytes from a string of length 14407 [-Wstringop-truncation] 104 | strncpy( axel->filename, axel->conf->default_filename, MAX_STRING ); | ^ axel.c:124:9: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 124 | strncpy( axel->url->text, s, MAX_STRING ); | ^ axel.c: In function ‘axel_open’: axel.c:148:42: warning: ‘.st’ directive output may be truncated writing 3 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 148 | snprintf( buffer, MAX_STRING, "%s.st", axel->filename ); | ^~~ In function ‘snprintf’, inlined from ‘axel_open’ at axel.c:148:2: /usr/include/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 4 and 1027 bytes into a destination of size 1024 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ axel.c: In function ‘axel_close’: axel.c:474:50: warning: ‘.st’ directive output may be truncated writing 3 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 474 | snprintf( buffer, MAX_STRING, "%s.st", axel->filename ); | ^~~ In function ‘snprintf’, inlined from ‘axel_close’ at axel.c:474:3: /usr/include/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 4 and 1027 bytes into a destination of size 1024 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ mv -f .deps/axel.Tpo .deps/axel.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT conf.o -MD -MP -MF .deps/conf.Tpo -c -o conf.o conf.c conf.c: In function ‘conf_init’: conf.c:154:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 154 | strncpy( conf->http_proxy, s2, MAX_STRING ); | ^ conf.c:152:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 152 | strncpy( conf->http_proxy, s2, MAX_STRING ); | ^ mv -f .deps/conf.Tpo .deps/conf.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT conn.o -MD -MP -MF .deps/conn.Tpo -c -o conn.o conn.c conn.c: In function ‘conn_set’: conn.c:52:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 52 | strncpy( url, i + 3, MAX_STRING ); | ^ conn.c:40:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 40 | strncpy( url, set_url, MAX_STRING ); | ^ conn.c:82:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 82 | strncpy( conn->file, i + 1, MAX_STRING ); | ^ conn.c:92:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 92 | strncpy( conn->host, i + 1, MAX_STRING ); | ^ conn.c:115:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 115 | strncpy( conn->pass, i + 1, MAX_STRING ); | ^ conn.c: In function ‘conn_url’: conn.c:156:57: warning: ‘%s’ directive writing up to 1023 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] 156 | sprintf( string + strlen( string ), "%s:%s@", | ^~ In file included from /usr/include/stdio.h:980, from axel.h:32, from conn.c:26: In function ‘sprintf’, inlined from ‘conn_url’ at conn.c:156:3: /usr/include/bits/stdio2.h:30:10: note: ‘__builtin___sprintf_chk’ output between 3 and 2049 bytes into a destination of size 1024 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ conn.c: In function ‘conn_url’: conn.c:159:49: warning: ‘%i’ directive writing between 1 and 11 bytes into a region of size between 0 and 1023 [-Wformat-overflow=] 159 | sprintf( string + strlen( string ), "%s:%i%s%s", | ^~ In function ‘sprintf’, inlined from ‘conn_url’ at conn.c:159:2: /usr/include/bits/stdio2.h:30:10: note: ‘__builtin___sprintf_chk’ output between 3 and 3082 bytes into a destination of size 1024 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ conn.c: In function ‘conn_setup’: conn.c:256:45: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] 256 | snprintf( s, MAX_STRING, "%s%s", conn->dir, conn->file ); | ^~ In function ‘snprintf’, inlined from ‘conn_setup’ at conn.c:256:3: /usr/include/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 1 and 2047 bytes into a destination of size 1024 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ conn.c: In function ‘conn_info’: conn.c:338:76: warning: ‘%s’ directive writing up to 1023 bytes into a region of size between 1006 and 2039 [-Wformat-overflow=] 338 | sprintf( conn->http->headers, "http://%s:%i%s", | ^~ 339 | conn->host, conn->port, s ); | ~ In function ‘sprintf’, inlined from ‘conn_info’ at conn.c:338:5: /usr/include/bits/stdio2.h:30:10: note: ‘__builtin___sprintf_chk’ output between 10 and 2066 bytes into a destination of size 2048 30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 31 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 32 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ conn.c: In function ‘conn_info’: conn.c:340:33: warning: ‘__builtin_strncpy’ output may be truncated copying 1024 bytes from a string of length 2047 [-Wstringop-truncation] 340 | strncpy( s, conn->http->headers, MAX_STRING ); | ^ conn.c:334:33: warning: ‘__builtin_strncpy’ output may be truncated copying 1024 bytes from a string of length 2047 [-Wstringop-truncation] 334 | strncpy( s, conn->http->headers, MAX_STRING ); | ^ mv -f .deps/conn.Tpo .deps/conn.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT ftp.o -MD -MP -MF .deps/ftp.Tpo -c -o ftp.o ftp.c ftp.c: In function ‘ftp_cwd’: ftp.c:93:9: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 93 | strncpy( conn->cwd, cwd, MAX_STRING ); | ^ ftp.c: In function ‘ftp_size’: ftp.c:190:17: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 190 | strncpy( fn, strstr( s, "->" ) + 3, MAX_STRING ); | ^ mv -f .deps/ftp.Tpo .deps/ftp.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT http.o -MD -MP -MF .deps/http.Tpo -c -o http.o http.c http.c: In function ‘http_connect’: http.c:37:9: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 37 | strncpy( conn->host, host, MAX_STRING ); | ^ mv -f .deps/http.Tpo .deps/http.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT search.o -MD -MP -MF .deps/search.Tpo -c -o search.o search.c search.c: In function ‘search_makelist’: search.c:143:25: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 143 | strncpy( results[i].url, s2, MAX_STRING ); | ^ mv -f .deps/search.Tpo .deps/search.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT tcp.o -MD -MP -MF .deps/tcp.Tpo -c -o tcp.o tcp.c mv -f .deps/tcp.Tpo .deps/tcp.Po gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR=\""/usr/local/share/locale"\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -MT text.o -MD -MP -MF .deps/text.Tpo -c -o text.o text.c text.c: In function ‘main’: text.c:121:25: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 121 | strncpy( fn, optarg, MAX_STRING ); | ^ text.c:101:25: warning: ‘__builtin_strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 101 | strncpy( conf->user_agent, optarg, MAX_STRING); | ^ mv -f .deps/text.Tpo .deps/text.Po gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -pthread -o axel axel.o conf.o conn.o ftp.o http.o search.o tcp.o text.o make[2]: Leaving directory '/svr-setup/axel-2.6/src' Making all in po make[2]: Entering directory '/svr-setup/axel-2.6/po' test ! -f ./axel.pot || \ test -z "de.gmo ja.gmo nl.gmo pt_BR.gmo ru.gmo zh_CN.gmo" || make de.gmo ja.gmo nl.gmo pt_BR.gmo ru.gmo zh_CN.gmo make[3]: Entering directory '/svr-setup/axel-2.6/po' rm -f de.gmo && /bin/msgfmt -c --statistics --verbose -o de.gmo de.po de.po: 46 translated messages, 6 fuzzy translations. rm -f ja.gmo && /bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po ja.po: 45 translated messages, 7 fuzzy translations. rm -f nl.gmo && /bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po nl.po: 41 translated messages, 7 fuzzy translations, 4 untranslated messages. rm -f pt_BR.gmo && /bin/msgfmt -c --statistics --verbose -o pt_BR.gmo pt_BR.po pt_BR.po: 50 translated messages, 2 fuzzy translations. rm -f ru.gmo && /bin/msgfmt -c --statistics --verbose -o ru.gmo ru.po ru.po: 43 translated messages, 7 fuzzy translations, 2 untranslated messages. rm -f zh_CN.gmo && /bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po zh_CN.po: 42 translated messages, 8 fuzzy translations, 2 untranslated messages. make[3]: Leaving directory '/svr-setup/axel-2.6/po' touch stamp-po make[2]: Leaving directory '/svr-setup/axel-2.6/po' make[2]: Entering directory '/svr-setup/axel-2.6' make[2]: Leaving directory '/svr-setup/axel-2.6' make[1]: Leaving directory '/svr-setup/axel-2.6' Making install in src make[1]: Entering directory '/svr-setup/axel-2.6/src' make[2]: Entering directory '/svr-setup/axel-2.6/src' /bin/mkdir -p '/usr/local/bin' /bin/install -c axel '/usr/local/bin' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/svr-setup/axel-2.6/src' make[1]: Leaving directory '/svr-setup/axel-2.6/src' Making install in po make[1]: Entering directory '/svr-setup/axel-2.6/po' installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/axel.mo installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/axel.mo installing nl.gmo as /usr/local/share/locale/nl/LC_MESSAGES/axel.mo installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/axel.mo installing ru.gmo as /usr/local/share/locale/ru/LC_MESSAGES/axel.mo installing zh_CN.gmo as /usr/local/share/locale/zh_CN/LC_MESSAGES/axel.mo if test "axel" = "gettext-tools"; then \ /bin/mkdir -p /usr/local/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /bin/install -c -m 644 ./$file \ /usr/local/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /usr/local/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/svr-setup/axel-2.6/po' make[1]: Entering directory '/svr-setup/axel-2.6' make[2]: Entering directory '/svr-setup/axel-2.6' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/share/man/man1' /bin/install -c -m 644 man/axel.1 '/usr/local/share/man/man1' make[2]: Leaving directory '/svr-setup/axel-2.6' make[1]: Leaving directory '/svr-setup/axel-2.6' /usr/local/bin/axel /usr/bin/which: no figlet in (/root/.local/bin:/root/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) git clone Centmin Mod repo... Cloning into 'centminmod'... real 0m0.671s user 0m0.277s sys 0m0.247s grep: warning: stray \ before - /usr/local/src/centminmod installing lynx... Installed: almalinux-indexhtml-10-3.el10.noarch lynx-2.9.0-6.el10.x86_64 egrep: warning: egrep is obsolescent; using grep -E total used free shared buff/cache available Mem: 7484 577 5041 20 2179 6907 Swap: 0 0 0 create 4GB swap file -rw-r--r--. 1 root root 4.0G Oct 5 18:04 /swapfile mkswap: /swapfile: insecure permissions 0644, fix with: chmod 0600 /swapfile Setting up swapspace version 1, size = 4 GiB (4294963200 bytes) no label, UUID=c67df362-87e0-497c-b04a-551c7254d216 swapon: /swapfile: insecure permissions 0644, 0600 suggested. Filename Type Size Used Priority /swapfile file 4194300 0 -2 total used free shared buff/cache available Mem: 7484 581 5036 20 2181 6903 Swap: 4095 0 4095 Redirecting to /bin/systemctl reload sshd.service grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) egrep: warning: egrep is obsolescent; using grep -E jq: parse error: Invalid numeric literal at line 1, column 10 grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / -rw-r--r--. 1 root root 615 Oct 5 18:02 /etc/rc.d/rc.local -rwxr-xr-x. 1 root root 615 Oct 5 18:02 /etc/rc.d/rc.local grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / no crontab for root Installed: qrencode-4.1.1-9.el10_0.x86_64 qrencode-libs-4.1.1-9.el10_0.x86_64 /root/.cache/crontab: mkdir: No such file or directory grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / /root/.cache/crontab: mkdir: No such file or directory /usr/local/src/centminmod/inc/cpcheck.inc: line 273: /usr/local/nginx/conf/normalize_encoding.conf: No such file or directory grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory /root/.cache/crontab: mkdir: No such file or directory 13 23 * * * /usr/local/src/centminmod/tools/autoprotect.sh >/dev/null 2>&1 11 */12 * * * /usr/local/src/centminmod/tools/jetpackips.sh >/dev/null 2>&1 20 2,14 * * * /usr/local/src/centminmod/tools/check-for-updates.sh all >/dev/null 2>&1 0 */4 * * * /usr/bin/cminfo_updater 2>/dev/null Detected architecture: x86_64 CPU Part: Selected -march flag: x86-64 egrep: warning: egrep is obsolescent; using grep -E jq: parse error: Invalid numeric literal at line 1, column 10 grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / /root/.cache/crontab: mkdir: No such file or directory grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / /usr/local/src/centminmod/inc/cpcheck.inc: line 273: /usr/local/nginx/conf/normalize_encoding.conf: No such file or directory grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory Ok: physically installed memory is sufficient for Centmin Mod Installation [Installed: 7484 MB >= 256 MB memory] ls: cannot access '/etc/init.d': No such file or directory ***************************************************** Downloading all required software for install routines. (B***************************************************** ************************************************* * Installing Development Tools (B************************************************* please wait for yum download and installs to complete. yum installs in less verbose mode so final install status is only shown.. .... ...... ......... Last metadata expiration check: 0:01:27 ago on Sun 05 Oct 2025 06:02:50 PM UTC. No match for argument: libgcj Error: Unable to find a match: libgcj real 0m0.406s user 0m0.325s sys 0m0.077s skip unneeded yum package check/installs for curl installer routines skip unneeded yum package check/installs for curl installer routines Installed: iftop-1.0-0.34.pre4.el10_0.x86_64 libibverbs-54.0-2.el10_0.x86_64 libpcap-14:1.10.4-7.el10.x86_64 mariadb-connector-c-config-3.4.4-1.el10.noarch mysql8.4-common-8.4.6-2.el10_0.noarch mysql8.4-libs-8.4.6-2.el10_0.x86_64 mytop-1.7-24.b737f60.el10_0.noarch perl-DBD-MySQL-5.007-4.el10.x86_64 perl-DBI-1.643-26.el10.x86_64 perl-Math-BigInt-1:2.0030.03-3.el10.noarch perl-Math-Complex-1.62-512.2.el10_0.noarch perl-Time-HiRes-4:1.9777-511.el10.x86_64 Last metadata expiration check: 0:01:30 ago on Sun 05 Oct 2025 06:02:50 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: ipset x86_64 7.22-7.el10_0 baseos 44 k ipset-devel x86_64 7.22-7.el10_0 crb 29 k Installing dependencies: ipset-libs x86_64 7.22-7.el10_0 baseos 69 k libmnl-devel x86_64 1.0.5-7.el10 crb 40 k Transaction Summary ================================================================================ Install 4 Packages Total download size: 182 k Installed size: 541 k Downloading Packages: (1/4): libmnl-devel-1.0.5-7.el10.x86_64.rpm 15 MB/s | 40 kB 00:00 (2/4): ipset-7.22-7.el10_0.x86_64.rpm 11 MB/s | 44 kB 00:00 (3/4): ipset-libs-7.22-7.el10_0.x86_64.rpm 14 MB/s | 69 kB 00:00 (4/4): ipset-devel-7.22-7.el10_0.x86_64.rpm 5.5 MB/s | 29 kB 00:00 -------------------------------------------------------------------------------- Total 3.6 MB/s | 182 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : ipset-libs-7.22-7.el10_0.x86_64 1/4 Installing : libmnl-devel-1.0.5-7.el10.x86_64 2/4 Installing : ipset-devel-7.22-7.el10_0.x86_64 3/4 Installing : ipset-7.22-7.el10_0.x86_64 4/4 Running scriptlet: ipset-7.22-7.el10_0.x86_64 4/4 Installed: ipset-7.22-7.el10_0.x86_64 ipset-devel-7.22-7.el10_0.x86_64 ipset-libs-7.22-7.el10_0.x86_64 libmnl-devel-1.0.5-7.el10.x86_64 Complete! GeoIP database and library install... (BError: Unable to find a match: GeoIP GeoIP-devel package GeoIP-devel is not installed package GeoIP is not installed GeoLiteCity database download ... (Bgrep: warning: stray \ before / HTTP/2 200 GEOIPCOUNTRYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory custom RPM installs -rw-r--r--. 1 root root 4.2K Oct 5 18:04 /root/centminlogs/centminmod_yumtimes_051025-180412.log egrep: warning: egrep is obsolescent; using grep -E 8.3 0 Download ccache-3.7.12.tar.gz ... (Begrep: warning: egrep is obsolescent; using grep -E 2025-10-05 18:04:25 URL:https://parts.centminmod.com/centminmodparts/ccache/ccache-3.7.12.tar.gz [506948/506948] -> "ccache-3.7.12.tar.gz" [1] Download ccache-3.7.12.tar.gz done. (Bccache-3.7.12.tar.gz valid file. (B install ccache 3.7.12 make: *** No rule to make target 'clean'. Stop. egrep: warning: egrep is obsolescent; using grep -E CC src/main.o CC src/args.o CC src/ccache.o CC src/cleanup.o CC src/compopt.o CC src/conf.o CC src/confitems.o CC src/counters.o CC src/execute.o CC src/exitfn.o CC src/hash.o CC src/hashutil.o CC src/language.o CC src/lockfile.o CC src/manifest.o CC src/mdfour.o CC src/stats.o CC src/util.o CC src/confitems_lookup.o CC src/envtoconfitems_lookup.o CC src/version.o CC src/getopt_long.o CC src/hashtable.o CC src/hashtable_itr.o CC src/murmurhashneutral2.o CC src/snprintf.o LD ccache CP ccache.1 INSTALL ccache INSTALL ccache.1 completed update to ccache 3.7.12 /usr/local/bin/dmotd: line 89: dos2unix: command not found =============================================================================== - Hostname......: nsrv.DentalSupplyGuy.com on AlmaLinux 10.0 - Users.........: Currently 1 user(s) logged on (includes: root) =============================================================================== - CPU usage.....: 1.32, 0.55, 0.21 (1, 5, 15 min) - Processes.....: 585 running - System uptime.: 0 days 0 hours 4 minutes 57 seconds =============================================================================== total used free shared buff/cache available Mem: 7484 617 4952 20 2229 6867 Swap: 4095 0 4095 =============================================================================== Filesystem Type Size Used Avail Use% Mounted on /dev/sda1 ext4 75G 6.6G 66G 10% / devtmpfs devtmpfs 4.0M 0 4.0M 0% /dev tmpfs tmpfs 3.7G 0 3.7G 0% /dev/shm efivarfs efivarfs 256K 28K 224K 11% /sys/firmware/efi/efivars tmpfs tmpfs 1.5G 17M 1.5G 2% /run tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service /dev/sda14 vfat 64M 8.4M 56M 14% /boot/efi tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyS0.service tmpfs tmpfs 749M 4.0K 749M 1% /run/user/0 =============================================================================== # ! This server maybe running CSF Firewall ! # DO NOT run the below command or you will lock yourself out of the server: # # iptables -F =============================================================================== * Getting Started Guide - https://centminmod.com/getstarted.html * Centmin Mod FAQ - https://centminmod.com/faq.html * Centmin Mod Config Files - https://centminmod.com/configfiles.html * Centmin Mod Blog - https://blog.centminmod.com * Community Forums https://community.centminmod.com [ << Register ] =============================================================================== =============================================================================== (B Centmin Mod local code is up to date at /usr/local/src/centminmod (B no available updates at this time... (B=============================================================================== (B Current local server Centmin Mod branch installed: 140.00beta01 (B=============================================================================== (BSet cache size limit to 2.5 GB Download nginx-1.29.1.tar.gz ... (BECDSA SSL Cipher BASED HTTPS detected, switching from axel to wget 2025-10-05 18:04:33 URL:https://nginx.org/download/nginx-1.29.1.tar.gz [1285529/1285529] -> "nginx-1.29.1.tar.gz" [1] Download done. (Bnginx-1.29.1.tar.gz valid file. (B Download ngx-fancyindex-0.5.2.tar.gz ... Download memc-nginx-module_v0.20.tar.gz ... (Bwget --progress=bar -O ngx-fancyindex-0.5.2.tar.gz https://github.com/aperezdc/ngx-fancyindex/archive/v0.5.2.tar.gz --tries=3 (BError: memc-nginx-module_v0.20.tar.gz not found!!! Downloading now...... (B--2025-10-05 18:04:33-- https://github.com/aperezdc/ngx-fancyindex/archive/v0.5.2.tar.gz Resolving github.com (github.com)... wget --progress=bar https://github.com/openresty/memc-nginx-module/archive/v0.20.tar.gz -O memc-nginx-module_v0.20.tar.gz --tries=3 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. --2025-10-05 18:04:33-- https://github.com/openresty/memc-nginx-module/archive/v0.20.tar.gz Resolving github.com (github.com)... HTTP request sent, awaiting response... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/aperezdc/ngx-fancyindex/tar.gz/refs/tags/v0.5.2 [following] --2025-10-05 18:04:33-- https://codeload.github.com/aperezdc/ngx-fancyindex/tar.gz/refs/tags/v0.5.2 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/openresty/memc-nginx-module/tar.gz/refs/tags/v0.20 [following] --2025-10-05 18:04:33-- https://codeload.github.com/openresty/memc-nginx-module/tar.gz/refs/tags/v0.20 Resolving codeload.github.com (codeload.github.com)... 140.82.112.10 Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘ngx-fancyindex-0.5.2.tar.gz’ 0K .......... .......... ........ 26.9M=0.001s 2025-10-05 18:04:33 (26.9 MB/s) - ‘ngx-fancyindex-0.5.2.tar.gz’ saved [29052] Download done. (Bngx-fancyindex-0.5.2.tar.gz valid file. (B Download ngx-fancyindex-0.5.2.tar.gz ... (Bwget --progress=bar -O ngx-fancyindex-0.5.2.tar.gz https://github.com/aperezdc/ngx-fancyindex/archive/v0.5.2.tar.gz --tries=3 --2025-10-05 18:04:33-- https://github.com/aperezdc/ngx-fancyindex/archive/v0.5.2.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/aperezdc/ngx-fancyindex/tar.gz/refs/tags/v0.5.2 [following] --2025-10-05 18:04:33-- https://codeload.github.com/aperezdc/ngx-fancyindex/tar.gz/refs/tags/v0.5.2 Resolving codeload.github.com (codeload.github.com)... 140.82.112.10 Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘memc-nginx-module_v0.20.tar.gz’ 0K .......... .......... .......... ... 30.1M=0.001s 2025-10-05 18:04:33 (30.1 MB/s) - ‘memc-nginx-module_v0.20.tar.gz’ saved [34736] Download done. (Bmemc-nginx-module_v0.20.tar.gz valid file. (B Download srcache-nginx-module_v0.33.tar.gz ... (BError: srcache-nginx-module_v0.33.tar.gz not found!!! Downloading now...... (Bwget --progress=bar https://github.com/openresty/srcache-nginx-module/archive/v0.33.tar.gz -O srcache-nginx-module_v0.33.tar.gz --tries=3 --2025-10-05 18:04:33-- https://github.com/openresty/srcache-nginx-module/archive/v0.33.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘ngx-fancyindex-0.5.2.tar.gz’ 0K .......... .......... ........ 29.5M=0.001s 2025-10-05 18:04:33 (29.5 MB/s) - ‘ngx-fancyindex-0.5.2.tar.gz’ saved [29052] Download done. (Bngx-fancyindex-0.5.2.tar.gz valid file. (B Download ngx_cache_purge-2.5.3.tar.gz ... (Bwget --progress=bar -O ngx_cache_purge-2.5.3.tar.gz https://github.com/nginx-modules/ngx_cache_purge/archive/2.5.3.tar.gz --tries=3 --2025-10-05 18:04:33-- https://github.com/nginx-modules/ngx_cache_purge/archive/2.5.3.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/nginx-modules/ngx_cache_purge/tar.gz/refs/tags/2.5.3 [following] --2025-10-05 18:04:33-- https://codeload.github.com/nginx-modules/ngx_cache_purge/tar.gz/refs/tags/2.5.3 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/openresty/srcache-nginx-module/tar.gz/refs/tags/v0.33 [following] --2025-10-05 18:04:33-- https://codeload.github.com/openresty/srcache-nginx-module/tar.gz/refs/tags/v0.33 Resolving codeload.github.com (codeload.github.com)... 140.82.112.10 Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘srcache-nginx-module_v0.33.tar.gz’ 0K .......... .......... .......... .......... ......... 53.7M=0.001s 2025-10-05 18:04:33 (53.7 MB/s) - ‘srcache-nginx-module_v0.33.tar.gz’ saved [51025] 200 OK Length: unspecified [application/x-gzip] Saving to: ‘ngx_cache_purge-2.5.3.tar.gz’ 0K .......... ...... 79.2M=0s 2025-10-05 18:04:33 (79.2 MB/s) - ‘ngx_cache_purge-2.5.3.tar.gz’ saved [17156] Download done. Download done. (B(Bngx_cache_purge-2.5.3.tar.gz valid file. (B Download Nginx-accesskey-2.0.5.tar.gz ... srcache-nginx-module_v0.33.tar.gz valid file. (Bwget https://parts.centminmod.com/centminmodparts/nginx/modules/Nginx-accesskey-2.0.5.tar.gz -O Nginx-accesskey-2.0.5.tar.gz --tries=3 (B Download nginx-develkit_v0.3.2.tar.gz ... (B--2025-10-05 18:04:33-- https://parts.centminmod.com/centminmodparts/nginx/modules/Nginx-accesskey-2.0.5.tar.gz Error: nginx-develkit_v0.3.2.tar.gz not found!!! Downloading now...... Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:aaa, 2606:4700::6812:baa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:aaa|:443... (Bconnected. wget --progress=bar https://github.com/vision5/ngx_devel_kit/archive/v0.3.2.tar.gz -O nginx-develkit_v0.3.2.tar.gz --tries=3 --2025-10-05 18:04:33-- https://github.com/vision5/ngx_devel_kit/archive/v0.3.2.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... HTTP request sent, awaiting response... 200 OK Length: 2675 (2.6K) [application/octet-stream] Saving to: ‘Nginx-accesskey-2.0.5.tar.gz’ 0K .. 100% 32.7M=0s 2025-10-05 18:04:33 (32.7 MB/s) - ‘Nginx-accesskey-2.0.5.tar.gz’ saved [2675/2675] Download done. (BNginx-accesskey-2.0.5.tar.gz valid file. (B Download nginx-http-concat-master.tar.gz ... (Bnginx-http-concat-master.tar.gz Archive found, skipping download... (Bnginx-http-concat-master.tar.gz valid file. (B Download headers-more-v0.37.tar.gz ... (B302 Found Location: https://codeload.github.com/vision5/ngx_devel_kit/tar.gz/refs/tags/v0.3.2 [following] --2025-10-05 18:04:33-- https://codeload.github.com/vision5/ngx_devel_kit/tar.gz/refs/tags/v0.3.2 Resolving codeload.github.com (codeload.github.com)... wget --progress=bar https://github.com/openresty/headers-more-nginx-module/archive/v0.37.tar.gz -O headers-more-v0.37.tar.gz --tries=3 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. --2025-10-05 18:04:33-- https://github.com/openresty/headers-more-nginx-module/archive/v0.37.tar.gz HTTP request sent, awaiting response... Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘nginx-develkit_v0.3.2.tar.gz’ 0K .......... .......... .......... .......... .......... 34.8M 50K .......... .... 90.6M=0.002s 2025-10-05 18:04:34 (40.6 MB/s) - ‘nginx-develkit_v0.3.2.tar.gz’ saved [66551] Download done. (Bnginx-develkit_v0.3.2.tar.gz valid file. (B Download set-misc-nginx-module_v0.33.tar.gz ... (BError: set-misc-nginx-module_v0.33.tar.gz not found!!! Downloading now...... (Bwget --progress=bar https://github.com/openresty/set-misc-nginx-module/archive/v0.33.tar.gz -O set-misc-nginx-module_v0.33.tar.gz --tries=3 --2025-10-05 18:04:34-- https://github.com/openresty/set-misc-nginx-module/archive/v0.33.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/openresty/headers-more-nginx-module/tar.gz/refs/tags/v0.37 [following] --2025-10-05 18:04:34-- https://codeload.github.com/openresty/headers-more-nginx-module/tar.gz/refs/tags/v0.37 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/openresty/set-misc-nginx-module/tar.gz/refs/tags/v0.33 [following] --2025-10-05 18:04:34-- https://codeload.github.com/openresty/set-misc-nginx-module/tar.gz/refs/tags/v0.33 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘headers-more-v0.37.tar.gz’ 0K .......... .......... ........ 51.4M=0.001s 2025-10-05 18:04:34 (51.4 MB/s) - ‘headers-more-v0.37.tar.gz’ saved [29433] Download done. (Bheaders-more-v0.37.tar.gz valid file. (B Download nginx-sticky-master.tar.gz ... (Bnginx-sticky-master.tar.gz Archive found, skipping download... (Bnginx-sticky-master.tar.gz valid file. (B Download nginx-upstream-check-0.3.0.tar.gz ... (B200 OK Length: unspecified [application/x-gzip] Saving to: ‘set-misc-nginx-module_v0.33.tar.gz’ 0K .......... .......... ......... 23.7M=0.001s 2025-10-05 18:04:34 (23.7 MB/s) - ‘set-misc-nginx-module_v0.33.tar.gz’ saved [30084] nginx-upstream-check-0.3.0.tar.gz Archive found, skipping download... Download done. (B(Bset-misc-nginx-module_v0.33.tar.gz valid file. (B Download echo-nginx-module_v0.63.tar.gz ... nginx-upstream-check-0.3.0.tar.gz valid file. (BError: echo-nginx-module_v0.63.tar.gz not found!!! Downloading now...... (B Download ngx_http_redis-0.4.0-cmm.tar.gz ... (B(Bwget https://github.com/centminmod/ngx_http_redis/archive/refs/tags/0.4.0-cmm.tar.gz -O ngx_http_redis-0.4.0-cmm.tar.gz --tries=3 wget --progress=bar https://github.com/openresty/echo-nginx-module/archive/v0.63.tar.gz -O echo-nginx-module_v0.63.tar.gz --tries=3 --2025-10-05 18:04:34-- https://github.com/centminmod/ngx_http_redis/archive/refs/tags/0.4.0-cmm.tar.gz Resolving github.com (github.com)... --2025-10-05 18:04:34-- https://github.com/openresty/echo-nginx-module/archive/v0.63.tar.gz 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/openresty/echo-nginx-module/tar.gz/refs/tags/v0.63 [following] --2025-10-05 18:04:34-- https://codeload.github.com/openresty/echo-nginx-module/tar.gz/refs/tags/v0.63 Resolving codeload.github.com (codeload.github.com)... 140.82.113.9 Connecting to codeload.github.com (codeload.github.com)|140.82.113.9|:443... 302 Found Location: https://codeload.github.com/centminmod/ngx_http_redis/tar.gz/refs/tags/0.4.0-cmm [following] --2025-10-05 18:04:34-- https://codeload.github.com/centminmod/ngx_http_redis/tar.gz/refs/tags/0.4.0-cmm Resolving codeload.github.com (codeload.github.com)... 140.82.112.10 Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected. connected. HTTP request sent, awaiting response... HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘ngx_http_redis-0.4.0-cmm.tar.gz’ 0K .......... .. 67.9M=0s 2025-10-05 18:04:34 (67.9 MB/s) - ‘ngx_http_redis-0.4.0-cmm.tar.gz’ saved [13140] Download done. 200 OK Length: unspecified [application/x-gzip] Saving to: ‘echo-nginx-module_v0.63.tar.gz’ 0K .......... .......... .......... .......... .......... 36.3M(B 50K .. 49.9M=0.001s 2025-10-05 18:04:34 (36.7 MB/s) - ‘echo-nginx-module_v0.63.tar.gz’ saved [53421] Download done. (Bngx_http_redis-0.4.0-cmm.tar.gz valid file. (B Download pcre-8.45.tar.gz ... (Becho-nginx-module_v0.63.tar.gz valid file. (B Download redis2-nginx-module_v0.15.tar.gz ... (BError: redis2-nginx-module_v0.15.tar.gz not found!!! Downloading now...... (Bwget --progress=bar https://github.com/openresty/redis2-nginx-module/archive/v0.15.tar.gz -O redis2-nginx-module_v0.15.tar.gz --tries=3 --2025-10-05 18:04:34-- https://github.com/openresty/redis2-nginx-module/archive/v0.15.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... pcre-8.45.tar.gz Archive found, skipping download... (B302 Found Location: https://codeload.github.com/openresty/redis2-nginx-module/tar.gz/refs/tags/v0.15 [following] --2025-10-05 18:04:34-- https://codeload.github.com/openresty/redis2-nginx-module/tar.gz/refs/tags/v0.15 Resolving codeload.github.com (codeload.github.com)... 140.82.112.10 Connecting to codeload.github.com (codeload.github.com)|140.82.112.10|:443... connected. pcre-8.45.tar.gz valid file. HTTP request sent, awaiting response... (B Download pcre2-10.39.tar.gz ... (Bwget --progress=bar https://parts.centminmod.com/centminmodparts/pcre/pcre2-10.39.tar.gz -O pcre2-10.39.tar.gz --tries=3 --2025-10-05 18:04:34-- https://parts.centminmod.com/centminmodparts/pcre/pcre2-10.39.tar.gz Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:baa, 2606:4700::6812:aaa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:baa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘redis2-nginx-module_v0.15.tar.gz’ 0K .......... .......... .... 51.5M=0s 2025-10-05 18:04:34 (51.5 MB/s) - ‘redis2-nginx-module_v0.15.tar.gz’ saved [25471] Download done. (Bredis2-nginx-module_v0.15.tar.gz valid file. (B 200 OK Length: 2309964 (2.2M) [application/x-tar] Saving to: ‘pcre2-10.39.tar.gz’ 0K .......... .......... .......... .......... .......... 2% 98.1M 0s 50K .......... .......... .......... .......... .......... 4% 41.3M 0s 100K .......... .......... .......... .......... .......... 6% 78.0M 0s 150K .......... .......... .......... .......... .......... 8% 146M 0s 200K .......... .......... .......... .......... .......... 11% 150M 0s 250K .......... .......... .......... .......... .......... 13% 225M 0s 300K .......... .......... .......... .......... .......... 15% 287M 0s 350K .......... .......... .......... .......... .......... 17% 346M 0s 400K .......... .......... .......... .......... .......... 19% 345M 0s 450K .......... .......... .......... .......... .......... 22% 290M 0s 500K .......... .......... .......... .......... .......... 24% 292M 0s 550K .......... .......... .......... .......... .......... 26% 326M 0s 600K .......... .......... .......... .......... .......... 28% 358M 0s 650K .......... .......... .......... .......... .......... 31% 315M 0s 700K .......... .......... .......... .......... .......... 33% 250M 0s 750K .......... .......... .......... .......... .......... 35% 280M 0s 800K .......... .......... .......... .......... .......... 37% 357M 0s 850K .......... .......... .......... .......... .......... 39% 257M 0s 900K .......... .......... .......... .......... .......... 42% 317M 0s 950K .......... .......... .......... .......... .......... 44% 328M 0s 1000K .......... .......... .......... .......... .......... 46% 274M 0s 1050K .......... .......... .......... .......... .......... 48% 290M 0s 1100K .......... .......... .......... .......... .......... 50% 313M 0s 1150K .......... .......... .......... .......... .......... 53% 323M 0s 1200K .......... .......... .......... .......... .......... 55% 286M 0s 1250K .......... .......... .......... .......... .......... 57% 327M 0s 1300K .......... .......... .......... .......... .......... 59% 290M 0s 1350K .......... .......... .......... .......... .......... 62% 296M 0s 1400K .......... .......... .......... .......... .......... 64% 327M 0s 1450K .......... .......... .......... .......... .......... 66% 321M 0s 1500K .......... .......... .......... .......... .......... 68% 328M 0s 1550K .......... .......... .......... .......... .......... 70% 286M 0s 1600K .......... .......... .......... .......... .......... 73% 346M 0s 1650K .......... .......... .......... .......... .......... 75% 330M 0s 1700K .......... .......... .......... .......... .......... 77% 309M 0s 1750K .......... .......... .......... .......... .......... 79% 341M 0s 1800K .......... .......... .......... .......... .......... 82% 325M 0s 1850K .......... .......... .......... .......... .......... 84% 290M 0s 1900K .......... .......... .......... .......... .......... 86% 349M 0s 1950K .......... .......... .......... .......... .......... 88% 345M 0s 2000K .......... .......... .......... .......... .......... 90% 360M 0s 2050K .......... .......... .......... .......... .......... 93% 302M 0s 2100K .......... .......... .......... .......... .......... 95% 292M 0s 2150K .......... .......... .......... .......... .......... 97% 329M 0s 2200K .......... .......... .......... .......... .......... 99% 337M 0s 2250K ..... 100% 275M=0.009s 2025-10-05 18:04:34 (237 MB/s) - ‘pcre2-10.39.tar.gz’ saved [2309964/2309964] Download done. (Bpcre2-10.39.tar.gz valid file. (B Download nginx-dav-ext-module-0.0.3.tar.gz ... (Bnginx-dav-ext-module-0.0.3.tar.gz Archive found, skipping download... (Bnginx-dav-ext-module-0.0.3.tar.gz valid file. (B Download zlib-1.3.1.tar.gz ... grep: warning: stray \ before / (Bwget --progress=bar https://www.zlib.net/zlib-1.3.1.tar.gz -O zlib-1.3.1.tar.gz --tries=3 egrep: warning: egrep is obsolescent; using grep -E 8.3 0 download MAILPARSEPHP_VER=3.1.3 Download mailparse-3.1.3.tgz ... --2025-10-05 18:04:34-- https://www.zlib.net/zlib-1.3.1.tar.gz (BError: mailparse-3.1.3.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://pecl.php.net/get/mailparse-3.1.3.tgz --tries=3 --timeout=60 Resolving www.zlib.net (www.zlib.net)... 85.187.148.2 Connecting to www.zlib.net (www.zlib.net)|85.187.148.2|:443... Download csf.tgz ... (Bconnected. HTTP request sent, awaiting response... 200 OK Length: 1512791 (1.4M) [application/x-gzip] Saving to: ‘zlib-1.3.1.tar.gz’ 0K .......2025-10-05 18:04:35 URL:https://download.centminmod.com/csf.tgz [2264284/2264284] -> "csf.tgz" [1] Download csf.tgz done. (B... .......... .......... ........csf.tgz valid file. (B .. .......... 3% 471K 3s 50K .......... .......... .......... .......... .......... 6% 936K 2s 100K .......... .......... .......... .......... .......... 10% 955K 2s 150K .......... .......... .......... .......... .......... 13% 37.2M 1s 200K .......... .......... .......... .......... .......... 16% 45.3M 1s 250K .......... .......... .......... .......... .......... 20% 991K 1s 300K .......... .......... .......... .......... .......... 23% 78.2M 1s 350K .......... .......... .......... .......... .......... 27% 55.0M 1s 400K .......... .......... .......... .......... .......... 30% 120M 1s 450K .......... .......... .......... .......... .......... 33% 72.4M 1s 500K .......... .......... .......... .......... .......... 37% 1.51M 1s 550K .......... .......... .......... .......... .......... 40% 2.70M 0s 600K .......... .......... .......... .......... .......... 43% 92.5M 0s 650K .......... .......... .......... .......... .......... 47% 145M 0s 700K .......... .......... .......... .......... .......... 50% 80.5M 0s 750K .......... .......... .......... .......... .......... 54% 134M 0s 800K .......... .......... .......... .......... .......... 57% 144M 0s 850K .......... .......... .......... .......... .......... 60% 102M 0s 900K .......... .......... .......... .......... .......... 64% 95.2M 0s 950K .......... .......... .......... .......... .......... 67% 103M 0s 1000K .......... .......... .......... .......... .......... 71% 87.0M 0s 1050K .......... .......... .......... .......... .......... 74% 146M 0s 1100K .......... .......... .......... .......... .......... 77% 1019K 0s 1150K .......... .......... .......... .......... .......... 81% 62.1M 0s 1200K .......... .......... .......... .......... .......... 84% 67.3M 0s 1250K .......... .......... .......... .......... .......... 87% 71.8M 0s 1300K .......... .......... .......... .......... .......... 91% 210M 0s 1350K .......... .......... .......... .......... .......... 94% 175M 0s 1400K .......... .......... .......... .......... .......... 98% 210M 0s 1450K .......... .......... ....... 100% 174M=0.4s 2025-10-05 18:04:35 (3.85 MB/s) - ‘zlib-1.3.1.tar.gz’ saved [1512791/1512791] Download done. (Bzlib-1.3.1.tar.gz valid file. (B 2025-10-05 18:04:35 URL:https://pecl.php.net/get/mailparse-3.1.3.tgz [943785/943785] -> "mailparse-3.1.3.tgz" [1] Download done. (Bmailparse-3.1.3.tgz valid file. (B Download APC-3.1.13.tgz ... Download zendopcache-7.0.5.tgz ... (B(BAPC-3.1.13.tgz Archive found, skipping download...  zendopcache-7.0.5.tgz Archive found, skipping download... (B(Bzendopcache-7.0.5.tgz valid file. APC-3.1.13.tgz valid file. (B (B US server detected grep: warning: stray \ before / egrep: warning: egrep is obsolescent; using grep -E HTTP/2 404 grep: warning: stray \ before / egrep: warning: egrep is obsolescent; using grep -E HTTP/2 200 0 0 Download php-8.3.26.tar.gz ... (Bcurl -4 https://www.php.net/distributions/php-8.3.26.tar.gz -o php-8.3.26.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 19.0M 100 19.0M 0 0 41.3M 0 --:--:-- --:--:-- --:--:-- 41.4M Download done. (Bphp-8.3.26.tar.gz valid file. (B Download release-2.1.12-stable.tar.gz ... Download imagick-3.4.4.tgz ... (BError: release-2.1.12-stable.tar.gz not found !!! Downloading now...... \E[1;32;40m Download phpredis-4.3.0.tgz ... Download mongodb-1.7.5.tgz ... Download swoole-5.1.6.tgz ... wget -cnv --no-dns-cache -4 --progress=bar https://github.com/libevent/libevent/archive/release-2.1.12-stable.tar.gz --tries=3 (B(BError: imagick-3.4.4.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://pecl.php.net/get/imagick-3.4.4.tgz --tries=3 --timeout=60 Error: phpredis-4.3.0.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://github.com/phpredis/phpredis/archive/4.3.0.tar.gz -O phpredis-4.3.0.tgz --tries=3 (BError: mongodb-1.7.5.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://pecl.php.net/get/mongodb-1.7.5.tgz -O mongodb-1.7.5.tgz --tries=3 --timeout=60 (BError: swoole-5.1.6.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://pecl.php.net/get/swoole-5.1.6.tgz -O swoole-5.1.6.tgz --tries=3 --timeout=60 2025-10-05 18:04:37 URL:https://codeload.github.com/libevent/libevent/tar.gz/refs/tags/release-2.1.12-stable [743522/743522] -> "release-2.1.12-stable.tar.gz" [1] Download done. (Brelease-2.1.12-stable.tar.gz valid file. (B Download memcached-1.6.36.tar.gz ... (BError: memcached-1.6.36.tar.gz not found !!! Downloading now...... \E[1;32;40m grep: warning: stray \ before / 2025-10-05 18:04:38 URL:https://codeload.github.com/phpredis/phpredis/tar.gz/refs/tags/4.3.0 [242332] -> "phpredis-4.3.0.tgz" [1] Download done. (Bphpredis-4.3.0.tgz valid file. (B HTTP/1.1 200 OK wget -cnv --no-dns-cache -4 --progress=bar https://www.memcached.org/files/memcached-1.6.36.tar.gz --tries=3 2025-10-05 18:04:38 URL:https://pecl.php.net/get/imagick-3.4.4.tgz [253434/253434] -> "imagick-3.4.4.tgz" [1] Download done. (Bimagick-3.4.4.tgz valid file. (B 2025-10-05 18:04:38 URL:https://www.memcached.org/files/memcached-1.6.36.tar.gz [1261981/1261981] -> "memcached-1.6.36.tar.gz" [1] 2025-10-05 18:04:38 URL:https://pecl.php.net/get/mongodb-1.7.5.tgz [1223892/1223892] -> "mongodb-1.7.5.tgz" [1] Download done. Download done. 2025-10-05 18:04:38 URL:https://pecl.php.net/get/swoole-5.1.6.tgz [2266113/2266113] -> "swoole-5.1.6.tgz" [1] (BDownload done. (B(Bmemcached-1.6.36.tar.gz valid file. (B Download memcache-3.0.8.tgz ... (Bmemcache-3.0.8.tgz found, skipping download... (Bmemcache-3.0.8.tgz valid file. (B Download memcached-2.2.0.tgz ... (Bmemcached-2.2.0.tgz found, skipping download... (Bmemcached-2.2.0.tgz valid file. (B Download libmemcached-1.0.18.tar.gz ... (Blibmemcached-1.0.18.tar.gz found, skipping download... (Bswoole-5.1.6.tgz valid file. mongodb-1.7.5.tgz valid file. (B (B libmemcached-1.0.18.tar.gz valid file. (B openssldownload OPENSSL_LINK=https://github.com/openssl/openssl/releases/download/openssl-1.1.1w/openssl-1.1.1w.tar.gz grep: warning: stray \ before / US server detected grep: warning: stray \ before / OPENSSL_CURLCHECK OPENSSL_LINK=https://parts.centminmod.com/centminmodparts/openssl/openssl-1.1.1w.tar.gz HTTP/2 200 Download libressl-3.9.2.tar.gz ... (B2025-10-05 18:04:41 URL:https://cdn.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.9.2.tar.gz [4353829/4353829] -> "libressl-3.9.2.tar.gz" [1] Download done. (Blibressl-3.9.2.tar.gz valid file. (B Download siege-4.1.5.tar.gz ... Download mysqlreport ... (B(B2025-10-05 18:04:41 URL:https://parts.centminmod.com/centminmodparts/mysqlreport/mysqlreport [49223/49223] -> "mysqlreport" [1] Download mysqlreport done. (BDownload mysqltuner.pl ... (Bwget ${WGETOPT} --progress=bar "${MYSQLTUNER_LINK}" -O "${MYSQLTUNER_LINKFILE}" --tries=3 2025-10-05 18:04:41 URL:https://parts.centminmod.com/centminmodparts/siege/siege-4.1.5.tar.gz [528530/528530] -> "siege-4.1.5.tar.gz" [1] Download done. (Bsiege-4.1.5.tar.gz valid file. (B Download sproxy-latest.tar.gz ... (Bsproxy-latest found, skipping download... (Bsproxy-latest.tar.gz valid file. (B 2025-10-05 18:04:41 URL:https://parts.centminmod.com/centminmodparts/mysqltuner/mysqltuner.txt [216581/216581] -> "mysqltuner.pl" [1] Download mysqltuner.pl done. (B***************************************************** Downloads complete. (B***************************************************** -rw-r--r--. 1 root root 39K Oct 5 18:04 /root/centminlogs/centminmod_downloadtimes_051025-180412.log ********************************************************************** (B* Centmin Mod Nginx, MariaDB MySQL, PHP & DNS Install script for CentOS (B* Version: 140.00beta01.b252 - Date: 16/01/25 (B* Copyright 2011-2025 CentminMod.com eva2000 (centminmod.com) (B********************************************************************** (B This software comes with no warranty of any kind. You are free to use (Bit for both personal and commercial use as licensed under the GPL. (B Please read the included readme.txt before using this script. (B removing any i686 packages installed by default No match for argument: *.i686 No packages marked for removal. Dependencies resolved. Nothing to do. Complete! Your origional yum configuration has been backed up to /etc/yum.bak Centmin Mod secure /tmp # Sun Oct 5 06:04:42 PM UTC 2025 ************************************************* * Secured /tmp and /var/tmp (B************************************************* 4194304+0 records in 4194304+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 8.29596 s, 518 MB/s mke2fs 1.47.1 (20-May-2024) Discarding device blocks: 0/1048576 done Creating filesystem with 1048576 4k blocks and 262144 inodes Filesystem UUID: 55cbb531-7b49-429d-9502-2894228f9f69 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: 0/32 done Writing inode tables: 0/32 done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: 0/32 done Created symlink '/etc/systemd/system/multi-user.target.wants/mount-loop.service' → '/etc/systemd/system/mount-loop.service'. ************************************************* * Setting preferred localtime for VPS (B************************************************* Current date & time for the zone you selected is: Sun Oct 5 06:04:51 PM UTC 2025 which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) ************************************************* * Installing nginx (B************************************************* Installing nginx Modules / Prerequisites... (BDownload pcre-8.45.tar.gz ... (Bwget --progress=bar https://parts.centminmod.com/centminmodparts/pcre/pcre-8.45.tar.gz -O pcre-8.45.tar.gz --tries=3 --2025-10-05 18:04:51-- https://parts.centminmod.com/centminmodparts/pcre/pcre-8.45.tar.gz Resolving parts.centminmod.com (parts.centminmod.com)... 2606:4700::6812:aaa, 2606:4700::6812:baa, 104.18.10.170, ... Connecting to parts.centminmod.com (parts.centminmod.com)|2606:4700::6812:aaa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 2096552 (2.0M) [application/x-tar] Saving to: ‘pcre-8.45.tar.gz’ 0K .......... .......... .......... .......... .......... 2% 84.3M 0s 50K .......... .......... .......... .......... .......... 4% 37.5M 0s 100K .......... .......... .......... .......... .......... 7% 27.3M 0s 150K .......... .......... .......... .......... .......... 9% 193M 0s 200K .......... .......... .......... .......... .......... 12% 51.9M 0s 250K .......... .......... .......... .......... .......... 14% 251M 0s 300K .......... .......... .......... .......... .......... 17% 206M 0s 350K .......... .......... .......... .......... .......... 19% 260M 0s 400K .......... .......... .......... .......... .......... 21% 217M 0s 450K .......... .......... .......... .......... .......... 24% 171M 0s 500K .......... .......... .......... .......... .......... 26% 141M 0s 550K .......... .......... .......... .......... .......... 29% 184M 0s 600K .......... .......... .......... .......... .......... 31% 144M 0s 650K .......... .......... .......... .......... .......... 34% 244M 0s 700K .......... .......... .......... .......... .......... 36% 226M 0s 750K .......... .......... .......... .......... .......... 39% 210M 0s 800K .......... .......... .......... .......... .......... 41% 144M 0s 850K .......... .......... .......... .......... .......... 43% 177M 0s 900K .......... .......... .......... .......... .......... 46% 199M 0s 950K .......... .......... .......... .......... .......... 48% 212M 0s 1000K .......... .......... .......... .......... .......... 51% 158M 0s 1050K .......... .......... .......... .......... .......... 53% 231M 0s 1100K .......... .......... .......... .......... .......... 56% 204M 0s 1150K .......... .......... .......... .......... .......... 58% 143M 0s 1200K .......... .......... .......... .......... .......... 61% 183M 0s 1250K .......... .......... .......... .......... .......... 63% 226M 0s 1300K .......... .......... .......... .......... .......... 65% 239M 0s 1350K .......... .......... .......... .......... .......... 68% 188M 0s 1400K .......... .......... .......... .......... .......... 70% 178M 0s 1450K .......... .......... .......... .......... .......... 73% 171M 0s 1500K .......... .......... .......... .......... .......... 75% 185M 0s 1550K .......... .......... .......... .......... .......... 78% 207M 0s 1600K .......... .......... .......... .......... .......... 80% 235M 0s 1650K .......... .......... .......... .......... .......... 83% 203M 0s 1700K .......... .......... .......... .......... .......... 85% 251M 0s 1750K .......... .......... .......... .......... .......... 87% 232M 0s 1800K .......... .......... .......... .......... .......... 90% 222M 0s 1850K .......... .......... .......... .......... .......... 92% 236M 0s 1900K .......... .......... .......... .......... .......... 95% 226M 0s 1950K .......... .......... .......... .......... .......... 97% 246M 0s 2000K .......... .......... .......... .......... ....... 100% 226M=0.01s 2025-10-05 18:04:51 (146 MB/s) - ‘pcre-8.45.tar.gz’ saved [2096552/2096552] Download done. (Bpcre-8.45.tar.gz valid file. (B nginx install: recompileopenssl= nginx install: LIBRESSL_SWITCH=n nginx install: BORINGSSL_SWITCH=n nginx install: OPENSSL_SYSTEM_USE= nginx install: install openssl completed in .002933727 seconds which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) nginx install: luajit install completed in .002810744 seconds egrep: warning: egrep is obsolescent; using grep -E install zlib cloudflare... pwd /svr-setup /svr-setup /svr-setup Cloning into 'zlib-cloudflare-1.3.3'... /svr-setup/zlib-cloudflare-1.3.3 /svr-setup /svr-setup rm -f *.o *.lo *~ \ example minigzip examplesh minigzipsh \ example64 minigzip64 \ infcover \ libz.* foo.gz so_locations \ _match.s maketree contrib/infback9/*.o rm -rf objs rm -f *.gcda *.gcno *.gcov rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov cp -p zconf.h.in zconf.h rm -f Makefile zlib.pc configure.log CFLAGS=-O3 -pipe -fuse-ld=gold Checking for gcc... Checking for shared library support... Building shared library libz.so.1.2.8 with gcc. Checking for size_t... Yes. Checking for ssize_t... Yes. Checking for off64_t... Yes. Checking for fseeko... Yes. Checking for strerror... Yes. Checking for unistd.h... Yes. Checking for stdarg.h... Yes. Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf(). Checking for vsnprintf() in stdio.h... Yes. Checking for return value of vsnprintf()... Yes. Checking for attribute(visibility) support... Yes. Checking for SSE2 support ... Yes Checking for SSSE3 support ... Yes Checking for CRC and SSE4.2 support ... Yes Checking for PCLMUL support ... Yes Before NGINXCOMPILE_PIE='y' CFLAGS=-O3 -pipe -fuse-ld=gold gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o example.o test/example.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o adler32.o adler32.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o adler32_simd.o adler32_simd.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o crc32.o crc32.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o deflate.o deflate.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o infback.o infback.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o inffast.o inffast.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o inflate.o inflate.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o inftrees.o inftrees.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o trees.o trees.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o zutil.o zutil.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o inffast_chunk.o inffast_chunk.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o crc32_simd.o crc32_simd.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o compress.o compress.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o uncompr.o uncompr.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o gzclose.o gzclose.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o gzlib.o gzlib.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o gzread.o gzread.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -D_FORTIFY_SOURCE=2 -c -o gzwrite.o gzwrite.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -c -o minigzip.o test/minigzip.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/adler32.o adler32.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/adler32_simd.o adler32_simd.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/crc32.o crc32.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/deflate.o deflate.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/infback.o infback.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inffast.o inffast.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inflate.o inflate.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inftrees.o inftrees.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/trees.o trees.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/zutil.o zutil.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/inffast_chunk.o inffast_chunk.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/crc32_simd.o crc32_simd.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/compress.o compress.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/uncompr.o uncompr.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzclose.o gzclose.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzlib.o gzlib.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzread.o gzread.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -DPIC -c -o objs/gzwrite.o gzwrite.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o example64.o test/example.c gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -I. -D_FILE_OFFSET_BITS=64 -c -o minigzip64.o test/minigzip.c ar rc libz.a adler32.o adler32_simd.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o inffast_chunk.o crc32_simd.o compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example example.o -L. libz.a gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip minigzip.o -L. libz.a gcc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -fPIC -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o libz.so.1.2.8 adler32.lo adler32_simd.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo inffast_chunk.lo crc32_simd.lo compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo -lc gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o example64 example64.o -L. libz.a gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzip64 minigzip64.o -L. libz.a rm -f libz.so libz.so.1 ln -s libz.so.1.2.8 libz.so ln -s libz.so.1.2.8 libz.so.1 gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o examplesh example.o -L. libz.so.1.2.8 gcc -DHAS_PCLMUL -mpclmul -DHAS_SSE42 -msse4.2 -DADLER32_SIMD_SSSE3 -mssse3 -DINFLATE_CHUNK_SIMD_SSE2 -DHAS_SSE2 -msse2 -DINFLATE_CHUNK_READ_64LE -O3 -pipe -fuse-ld=gold -D_LARGEFILE64_SOURCE=1 -DHAVE_HIDDEN -o minigzipsh minigzip.o -L. libz.so.1.2.8 After NGINXCOMPILE_PIE='y' CFLAGS=-O3 -pipe -fuse-ld=gold cp libz.a /usr/local/zlib-cf/lib chmod 644 /usr/local/zlib-cf/lib/libz.a cp libz.so.1.2.8 /usr/local/zlib-cf/lib chmod 755 /usr/local/zlib-cf/lib/libz.so.1.2.8 cp zlib.3 /usr/local/zlib-cf/share/man/man3 chmod 644 /usr/local/zlib-cf/share/man/man3/zlib.3 cp zlib.pc /usr/local/zlib-cf/lib/pkgconfig chmod 644 /usr/local/zlib-cf/lib/pkgconfig/zlib.pc cp zlib.h zconf.h /usr/local/zlib-cf/include chmod 644 /usr/local/zlib-cf/include/zlib.h /usr/local/zlib-cf/include/zconf.h /svr-setup /svr-setup /svr-setup CFLAGS=-O3 -pipe -fuse-ld=gold CXXFLAGS=-O3 -pipe -fuse-ld=gold CFLAGS= CXXFLAGS= zlib cloudflare installed nginx install: nginx zlib install completed in 4.946661762 seconds which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) Compiling nginx... which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) ************************************************* Nginx Patch Time - NGINXPATCH_DELAY seconds delay (Bto allow you to patch files (B************************************************* 1029001 1029001 1029001 1029001 sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory 1029001 1029001 nginx install: nginx patch completed in 1.069715149 seconds /usr/local/src/centminmod/inc/nginx_configure.inc: line 457: dos2unix: command not found NGINX_KTLS_OPT= detected 1.1.1w which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) NGX_DYNAMICCHECK nginx_configure /svr-setup/nginx-1.29.1 nginx dynamic module support detected grep: /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory grep: /usr/local/nginx/conf/nginx.conf: No such file or directory DETECT_NGXVER=1029001 sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory tar (child): /svr-setup/openssl-1.1.1w.tar.gz: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory NGINX_ZSTD: NGINX_ZSTD=n DYNAMIC_SUPPORT=y ZSTD_NGINX_OPT= CLANG_FLTO_OPT= sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory Check existing server string: static u_char ngx_http_server_string[] = "Server: nginx" CRLF; static u_char ngx_http_server_build_string[] = "Server: " NGINX_VER_BUILD CRLF; Change server string to nginx centminmod NGX_MAX_ERROR_STR value #define NGX_MAX_ERROR_STR 2048 Last metadata expiration check: 0:00:35 ago on Sun 05 Oct 2025 06:04:23 PM UTC. No match for argument: jemalloc No match for argument: jemalloc-devel Error: Unable to find a match: jemalloc jemalloc-devel real 0m0.437s user 0m0.354s sys 0m0.079s GeoIP database and library install... (BError: Unable to find a match: GeoIP GeoIP-devel package GeoIP-devel is not installed package GeoIP is not installed GeoLiteCity database download ... (Bgrep: warning: stray \ before / HTTP/2 200 GEOIPCOUNTRYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory GeoIP database and library install... (BError: Unable to find a match: GeoIP GeoIP-devel package GeoIP-devel is not installed package GeoIP is not installed GeoLiteCity database download ... (Bgrep: warning: stray \ before / HTTP/2 200 GEOIPCOUNTRYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory GeoIP database and library install... (BError: Unable to find a match: GeoIP GeoIP-devel package GeoIP-devel is not installed package GeoIP is not installed GeoLiteCity database download ... (Bgrep: warning: stray \ before / HTTP/2 200 GEOIPCOUNTRYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoIP.dat.gz: No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory grep: warning: stray \ before / HTTP/2 200 GEOIPCITYDATA_CURLCHECK=0 /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory gzip: /usr/share/GeoIP/GeoLiteCity.dat.gz: No such file or directory cp: cannot stat '/usr/share/GeoIP/GeoLiteCity.dat': No such file or directory grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: /usr/local/nginx/conf/conf.d/virtual.conf: No such file or directory TCPFastOpenPassive TCPFastOpenPassiveFail TCPFastOpenListenOverflow TCPFastOpenCookieReqd TCPFastOpenBlackhole TCPSpuriousRtxHostQueues 0 0 0 0 0 0 sed: can't read src/http/modules/ngx_http_geoip_module.c: No such file or directory grep: src/http/modules/ngx_http_geoip_module.c: No such file or directory CLANG_CCOPT="" gcc -c -Q -march=native --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_native.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= znver2 -mavx [enabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [enabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [enabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [enabled] -msse4 [enabled] -msse4.1 [enabled] -msse4.2 [enabled] -msse4a [enabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [enabled] -mtune-ctrl= -mtune= znver2 Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: gcc -c -Q -march=x86-64 --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_x86-64.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= x86-64 -mavx [disabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [disabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [disabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [disabled] -msse4 [disabled] -msse4.1 [disabled] -msse4.2 [disabled] -msse4a [disabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [disabled] -mtune-ctrl= -mtune= generic Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: -march= znver2 | -march= x86-64 -mavx [enabled] | -mavx [disabled] -mavx2 [enabled] | -mavx2 [disabled] -mpclmul [enabled] | -mpclmul [disabled] -msse3 [enabled] | -msse3 [disabled] -msse4 [enabled] | -msse4 [disabled] -msse4.1 [enabled] | -msse4.1 [disabled] -msse4.2 [enabled] | -msse4.2 [disabled] -msse4a [enabled] | -msse4a [disabled] -mssse3 [enabled] | -mssse3 [disabled] -mtune= znver2 | -mtune= generic egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= znver2 | -march= x86-64 -mavx [enabled] | -mavx [disabled] -mavx2 [enabled] | -mavx2 [disabled] -mpclmul [enabled] | -mpclmul [disabled] -msse4 [enabled] | -msse4 [disabled] -msse4.1 [enabled] | -msse4.1 [disabled] -msse4.2 [enabled] | -msse4.2 [disabled] -msse4a [enabled] | -msse4a [disabled] -mtune= znver2 | -mtune= generic egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - egrep: warning: egrep is obsolescent; using grep -E gcc -c -Q -march=x86-64 -mavx -mavx2 -mpclmul -msse4 -msse4.1 -msse4.2 -msse4a --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_x86-64-non-native.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= x86-64 -mavx [enabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [enabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [enabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [enabled] -msse4 [enabled] -msse4.1 [enabled] -msse4.2 [enabled] -msse4a [enabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [enabled] -mtune-ctrl= -mtune= generic Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: GCC_NONNATIVEFLAGS= -mavx -mavx2 -mpclmul -msse4 -msse4.1 -msse4.2 -msse4a Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/14/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,fortran,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugs.almalinux.org/ --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-gcc-major-version-only --enable-libstdcxx-backtrace --with-libstdcxx-zoneinfo=/usr/share/zoneinfo --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --without-isl --enable-offload-targets=nvptx-none,amdgcn-amdhsa --enable-offload-defaulted --without-cuda-driver --enable-gnu-indirect-function --enable-cet --with-tune=generic --with-arch_64=x86-64-v3 --with-arch_32=x86-64 --build=x86_64-redhat-linux --with-build-config=bootstrap-lto --enable-link-serialization=1 --enable-host-pie --enable-host-bind-now Thread model: posix Supported LTO compression algorithms: zlib zstd gcc version 14.2.1 20250110 (Red Hat 14.2.1-7) (GCC) NGINX_IPV variable DETECT_NGXVER=1029001 13 NGINX_GEOIPTWOLITE=n -flto -fuse-ld=gold GCC NGXEXTRA_LDGOLDCCOPT= -flto -fuse-ld=gold NGX_LDGOLD=y NGX_LDMOLD=n NGINX_OPENSSLOPT_EXTRAS= NGINXOPENSSL_FATLTO_OBJECTS=n NGINXOPENSSL_NOFATLTO_OBJECTS=n OPENSSL_VERION=1.1.1w HTTPTWOOPT= --with-http_v2_module NGINX_ZSTD=n ZSTD_NGINX_OPT= CLANG_FLTO_OPT= #define NGX_LISTEN_BACKLOG 32767 grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: /usr/local/nginx/conf/nginx.conf: No such file or directory sed: can't read /usr/local/nginx/conf/nginx.conf: No such file or directory Last metadata expiration check: 0:00:39 ago on Sun 05 Oct 2025 06:04:23 PM UTC. No match for argument: checksec Error: Unable to find a match: checksec /svr-setup /svr-setup cp: cannot stat '/svr-setup/checksec.sh-2.6.0/checksec': No such file or directory /svr-setup /svr-setup dynamic module directory at /usr/local/nginx/modules ls: cannot access '/usr/local/nginx/modules': No such file or directory DETECT_NGXVER=1029001 TLSTHREEOPT=y OPENSSL_TLSONETHREE=y NGX_LDGOLD=y NGX_LDMOLD=n NGINX_OPENSSLOPT_EXTRAS= NGINXOPENSSL_FATLTO_OBJECTS=n NGINXOPENSSL_NOFATLTO_OBJECTS=n OPENSSL_VERION=1.1.1w OPENSSL_SYSTEM_USE= HTTPTWOOPT= --with-http_v2_module NGINX_ZSTD=n ZSTD_NGINX_OPT= CLANG_FLTO_OPT= Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/14/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,fortran,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugs.almalinux.org/ --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-gcc-major-version-only --enable-libstdcxx-backtrace --with-libstdcxx-zoneinfo=/usr/share/zoneinfo --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --without-isl --enable-offload-targets=nvptx-none,amdgcn-amdhsa --enable-offload-defaulted --without-cuda-driver --enable-gnu-indirect-function --enable-cet --with-tune=generic --with-arch_64=x86-64-v3 --with-arch_32=x86-64 --build=x86_64-redhat-linux --with-build-config=bootstrap-lto --enable-link-serialization=1 --enable-host-pie --enable-host-bind-now Thread model: posix Supported LTO compression algorithms: zlib zstd gcc version 14.2.1 20250110 (Red Hat 14.2.1-7) (GCC) nginx configure options (alternate ordering): 1 ./configure --with-ld-opt="-Wl,-E -Wl,-z,relro,-z,now -pie -flto -fuse-ld=gold -Wl,-Bsymbolic-functions -Wl,--as-needed" --with-cc-opt="-m64 -march=x86-64 -fPIC -g -O3 -fstack-protector-strong -flto -fuse-ld=gold --param=ssp-buffer-size=4 -Wformat -Wp,-D_FORTIFY_SOURCE=2" --prefix=/usr/local/nginx --sbin-path=/usr/local/sbin/nginx --conf-path=/usr/local/nginx/conf/nginx.conf --build=051025-180502--kvm-5a28fbb --with-compat --with-http_stub_status_module --with-http_secure_link_module --with-http_gzip_static_module --with-http_sub_module --with-http_addition_module --with-http_image_filter_module=dynamic --with-http_geoip_module --with-stream_geoip_module --with-stream_realip_module --with-threads --with-stream --with-stream_ssl_module --add-dynamic-module=../ngx-fancyindex-0.5.2 --add-module=../ngx_cache_purge-2.5.3 --add-module=../ngx_http_redis-0.4.0-cmm --add-dynamic-module=../headers-more-nginx-module-0.37 --with-zlib-opt=-fPIC --with-http_ssl_module --with-http_v2_module --with-openssl=../ --with-openssl-opt="enable-ec_nistp_64_gcc_128 enable-tls1_3" /usr/local/src/centminmod/inc/nginx_configure.inc: line 6003: ./configure: No such file or directory nginx install: nginx configure completed in 5.517520228 seconds which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) nginx install: initial OPENSSL_VERSION=1.1.1w time make -j2 make: *** No targets specified and no makefile found. Stop. real 0m0.003s user 0m0.000s sys 0m0.003s nginx install: nginx make completed in .022944859 seconds which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) make: *** No rule to make target 'install'. Stop. real 0m0.003s user 0m0.000s sys 0m0.003s nginx install: nginx make install completed in .007147191 seconds Using UID/GID: 1068 Creating nginx group and user with UID 1068 and GID 1068 Verifying nginx user details: uid=1068(nginx) gid=1068(nginx) groups=1068(nginx) ngx_dynamicfunction NGINX_VERSION=1.29.1 ngx_dynamicfunction NGINX_HTTP2=y which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) NGX_DYNAMICCHECK nginx_configure /svr-setup nginx dynamic module support detected DETECT_NGXVER=1029001 grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / ${CUR_DIR} & ${CM_INSTALLDIR} /usr/local/src/centminmod /usr/local/src/centminmod grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / Setup default hostname: nsrv.DentalSupplyGuy.com Installed: dos2unix-7.5.2-3.el10.x86_64 iptables: No chain/target/match by that name. ---------------------------------------------- Creating /etc/logrotate.d/nginx file ---------------------------------------------- ...... ---------------------------------------------------------------------------- /var/log/nginx/*.log /usr/local/nginx/logs/*.log /home/nginx/domains/*/log/*.log /var/log/nginx/*.json /usr/local/nginx/logs/*.json /home/nginx/domains/*/log/*.json { daily dateext missingok rotate 10 compress delaycompress notifempty postrotate /bin/kill -SIGUSR1 $(cat /usr/local/nginx/logs/nginx.pid 2>/dev/null) 2>/dev/null || true endscript } --------------------------------------------------------------------------- Current nginx log directories: --------------------------------------------------------------------------- ls -lh /var/log/nginx/ total 0 -rw-rw----. 1 root root 0 Oct 5 18:05 localhost.access.log -rw-rw----. 1 root root 0 Oct 5 18:05 localhost.error.log --------------------------------------------------------------------------- total 0 --------------------------------------------------------------------------- ---------------------------------------------------------------------------- nginx logrotation /etc/logrotate.d/nginx setup completed ---------------------------------------------------------------------------- grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / dynamic module directory at /usr/local/nginx/modules ls: cannot access '/usr/local/nginx/modules': No such file or directory nginx install: countcpus, detect_tlsonethree & run_after_nginx_install functions completed in .026321102 seconds Last metadata expiration check: 0:00:42 ago on Sun 05 Oct 2025 06:04:23 PM UTC. No match for argument: checksec Error: Unable to find a match: checksec /svr-setup /svr-setup cp: cannot stat '/svr-setup/checksec.sh-2.6.0/checksec': No such file or directory /svr-setup checksec --format=json --file=/usr/local/sbin/nginx | jq -r /usr/local/src/centminmod/inc/nginx_install.inc: line 617: checksec: command not found nginx install: checksec_nginx function completed in .920014765 seconds nginx install: make time completed in .022944859 seconds ************************************************* * nginx installed, Apache disabled (B************************************************* which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) -rw-r--r--. 1 root root 45K Oct 5 18:05 /root/centminlogs/centminmod_ngxinstalltime_051025-180412.log ************************************************* * Installing MariaDB via CentOS Yum Repo (B************************************************* MariaDB 10.4 Repo setup... setup /var/log/mysqld.log chown: invalid user: ‘mysql:mysql’ -rw-------. 1 root root 0 Oct 5 18:05 /var/log/mysqld.log rpm --import https://supplychain.mariadb.com/MariaDB-Server-GPG-KEY which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) MariaDB 10.4 YUM install... which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) Copying MariaDB my-mdb10-4gb.cnf file to /etc/my.cnf [client] socket=/var/lib/mysql/mysql.sock [mysql] max_allowed_packet = 64M [mysqld] local-infile=0 ignore_db_dirs=lost+found character-set-server=utf8 datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #bind-address=127.0.0.1 # optimized my.cnf for MariaDB 5.5.x # by eva2000 # centminmod.com tmpdir=/home/mysqltmp innodb=ON #skip-federated #skip-pbxt #skip-pbxt_statistics #skip-archive #skip-name-resolve #old_passwords back_log = 350 max_connections = 350 key_buffer_size = 256M myisam_sort_buffer_size = 256M myisam_max_sort_file_size = 2048M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_definition_cache = 8192 table_open_cache = 4096 thread_cache_size = 256 wait_timeout = 1800 connect_timeout = 10 tmp_table_size = 256M max_heap_table_size = 256M max_allowed_packet = 64M #max_seeks_for_key = 4294967295 #group_concat_max_len = 1024 max_length_for_sort_data = 1024 net_buffer_length = 16384 max_connect_errors = 100000 concurrent_insert = 2 read_rnd_buffer_size = 512K bulk_insert_buffer_size = 8M # query_cache boost for MariaDB >10.1.2+ # https://community.centminmod.com/posts/30811/ query_cache_limit = 1024K query_cache_size = 0 query_cache_type = 0 query_cache_min_res_unit = 2K query_prealloc_size = 262144 query_alloc_block_size = 65536 transaction_alloc_block_size = 8192 transaction_prealloc_size = 4096 default-storage-engine = InnoDB log_warnings=1 slow_query_log=0 long_query_time=1 slow_query_log_file=/var/lib/mysql/slowq.log log-error=/var/log/mysqld.log # innodb settings innodb_large_prefix=1 innodb_purge_threads=1 innodb_file_format = Barracuda innodb_file_per_table = 1 innodb_open_files = 4000 innodb_data_file_path= ibdata1:10M:autoextend innodb_buffer_pool_size = 512M ## https://mariadb.com/kb/en/mariadb/xtradbinnodb-server-system-variables/#innodb_buffer_pool_instances #innodb_buffer_pool_instances=1 innodb_log_files_in_group = 2 innodb_log_file_size = 256M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 0 innodb_lock_wait_timeout=50 innodb_flush_method = O_DIRECT innodb_support_xa=1 # 200 * # DISKS innodb_io_capacity = 300 innodb_io_capacity_max = 2000 innodb_read_io_threads = 4 innodb_write_io_threads = 2 innodb_flush_neighbors = 1 # mariadb settings [mariadb] #thread-handling = pool-of-threads #thread-pool-size= 20 #mysql --port=3307 --protocol=tcp #extra-port=3307 #extra-max-connections=1 userstat = 0 key_cache_segments = 1 aria_group_commit = none aria_group_commit_interval = 0 aria_log_file_size = 64M aria_log_purge_type = immediate aria_pagecache_buffer_size = 64M aria_sort_buffer_size = 64M [mariadb-5.5] innodb_file_format = Barracuda innodb_file_per_table = 1 #ignore_db_dirs= query_cache_strip_comments=0 innodb_read_ahead = linear innodb_adaptive_flushing_method = estimate innodb_flush_neighbor_pages = 1 innodb_stats_update_need_lock = 0 innodb_log_block_size = 512 log_slow_filter =admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk [mysqld_safe] socket=/var/lib/mysql/mysql.sock log-error=/var/log/mysqld.log #nice = -5 open-files-limit = 8192 [mysqldump] #default-character-set=utf8 quick max_allowed_packet = 64M [myisamchk] tmpdir=/home/mysqltmp key_buffer = 256M sort_buffer = 32M read_buffer = 32M write_buffer = 32M [mysqlhotcopy] interactive-timeout [mariadb-10.0] innodb_file_format = Barracuda innodb_file_per_table = 1 # 2 variables needed to switch from XtraDB to InnoDB plugins #plugin-load=ha_innodb #ignore_builtin_innodb ## MariaDB 10 only save and restore buffer pool pages ## warm up InnoDB buffer pool on server restarts innodb_buffer_pool_dump_at_shutdown=1 innodb_buffer_pool_load_at_startup=1 innodb_buffer_pool_populate=0 ## Disabled settings performance_schema=OFF innodb_stats_on_metadata=OFF innodb_sort_buffer_size=2M innodb_online_alter_log_max_size=128M query_cache_strip_comments=0 log_slow_filter =admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) setup /var/log/mysqld.log chown: invalid user: ‘mysql:mysql’ -rw-------. 1 root root 0 Oct 5 18:05 /var/log/mysqld.log systemctl restart mariadb.service Failed to restart mariadb.service: Unit mariadb.service not found. egrep: warning: egrep is obsolescent; using grep -E NotifyAccess=none ManagedOOMSwap=auto ManagedOOMMemoryPressure=auto ManagedOOMMemoryPressureLimit=0 ManagedOOMMemoryPressureDurationUSec=[not set] ManagedOOMPreference=none LimitNOFILE=1073741816 LimitNOFILESoft=1073741816 OOMScoreAdjust=0 which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) ------------------------------------------------ Installing MariaDB 10 plugins ------------------------------------------------ mysql -e "INSTALL SONAME 'metadata_lock_info';" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1168: mysql: command not found mysql -e "INSTALL SONAME 'query_cache_info';" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1170: mysql: command not found mysql -e "INSTALL SONAME 'query_response_time';" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1172: mysql: command not found mysql -t -e "SELECT * FROM mysql.plugin;" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1179: mysql: command not found mysql -t -e "SHOW PLUGINS;" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1181: mysql: command not found mysql -t -e "SHOW ENGINES;" /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1183: mysql: command not found Installed: cyrus-imapd-3.8.3-7.el10.x86_64 cyrus-imapd-libs-3.8.3-7.el10.x86_64 cyrus-imapd-utils-3.8.3-7.el10.x86_64 libical-3.0.18-3.el10.x86_64 libpq-16.8-2.el10_0.x86_64 lm_sensors-devel-3.6.0-20.el10.x86_64 mariadb-connector-c-3.4.4-1.el10.x86_64 net-snmp-1:5.9.4-15.el10_0.x86_64 net-snmp-agent-libs-1:5.9.4-15.el10_0.x86_64 net-snmp-devel-1:5.9.4-15.el10_0.x86_64 net-snmp-libs-1:5.9.4-15.el10_0.x86_64 perl-AutoSplit-5.74-512.2.el10_0.noarch perl-Benchmark-1.25-512.2.el10_0.noarch perl-CPAN-Meta-2.150010-511.el10.noarch perl-CPAN-Meta-Requirements-2.143-11.el10.noarch perl-CPAN-Meta-YAML-0.018-512.el10.noarch perl-Cyrus-3.8.3-7.el10.x86_64 perl-Devel-PPPort-3.72-512.el10.x86_64 perl-ExtUtils-Command-2:7.70-513.el10.noarch perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch perl-ExtUtils-Install-2.22-511.el10.noarch perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch perl-ExtUtils-Manifest-1:1.75-511.el10.noarch perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch perl-IO-Multiplex-1.16-30.el10.noarch perl-JSON-4.10-7.el10.noarch perl-JSON-PP-1:4.16-512.el10.noarch perl-Net-Server-2.014-9.el10.noarch perl-Sys-Syslog-0.36-512.el10.x86_64 perl-Term-ReadLine-1.17-512.2.el10_0.noarch perl-Test-Harness-1:3.48-512.el10.noarch perl-Tie-4.6-512.2.el10_0.noarch perl-Unix-Syslog-1.1-53.el10.x86_64 perl-devel-4:5.40.2-512.2.el10_0.x86_64 perl-doc-5.40.2-512.2.el10_0.noarch popt-devel-1.19-8.el10.x86_64 python3-pyparsing-3.1.1-7.el10.noarch rpm-devel-4.19.1.1-12.el10.alma.1.x86_64 sscg-3.0.5-9.el10.x86_64 systemtap-sdt-devel-5.2-2.el10.x86_64 systemtap-sdt-dtrace-5.2-2.el10.x86_64 xapian-core-libs-1.4.23-4.el10.x86_64 No matches found for the following disable plugin patterns: priorities Last metadata expiration check: 0:00:47 ago on Sun 05 Oct 2025 06:04:22 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: postfix x86_64 2:3.8.5-8.el10 appstream 1.5 M Installing dependencies: postfix-lmdb x86_64 2:3.8.5-8.el10 appstream 25 k Transaction Summary ================================================================================ Install 2 Packages Total download size: 1.5 M Installed size: 4.5 M Downloading Packages: (1/2): postfix-lmdb-3.8.5-8.el10.x86_64.rpm 9.7 MB/s | 25 kB 00:00 (2/2): postfix-3.8.5-8.el10.x86_64.rpm 148 MB/s | 1.5 MB 00:00 -------------------------------------------------------------------------------- Total 48 MB/s | 1.5 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : postfix-lmdb-2:3.8.5-8.el10.x86_64 1/2 Running scriptlet: postfix-2:3.8.5-8.el10.x86_64 2/2 Installing : postfix-2:3.8.5-8.el10.x86_64 2/2 Running scriptlet: postfix-2:3.8.5-8.el10.x86_64 2/2 Installed: postfix-2:3.8.5-8.el10.x86_64 postfix-lmdb-2:3.8.5-8.el10.x86_64 Complete! real 0m2.956s user 0m1.646s sys 0m0.659s grep: /etc/yum.repos.d/mariadb.repo: No such file or directory ---------------------------------------------- Creating /etc/logrotate.d/mysql file ---------------------------------------------- ...... ---------------------------------------------- Creating /etc/logrotate.d/mysql-slowlog file ---------------------------------------------- ...... ---------------------------------------------------------------------------- /var/log/mysqld.log { create 600 mysql mysql dateext notifempty daily rotate 8 missingok compress sharedscripts postrotate if test -x /usr/bin/mysqladmin && /usr/bin/mysqladmin ping &>/dev/null then env HOME=/root/ /usr/bin/mysql -e 'select @@global.long_query_time into @lqt_save; set global long_query_time=2000; select sleep(2); FLUSH LOGS; select sleep(2); set global long_query_time=@lqt_save;' fi endscript } ---------------------------------------------------------------------------- /var/lib/mysql/slowq.log { create 600 mysql mysql dateext notifempty daily rotate 8 missingok compress sharedscripts postrotate # just if mysqld is really running if test -x /usr/bin/mysqladmin && /usr/bin/mysqladmin ping &>/dev/null then env HOME=/root/ /usr/bin/mysql -e 'select @@global.long_query_time into @lqt_save; set global long_query_time=2000; set global slow_query_log = 0; select sleep(2); FLUSH LOGS; select sleep(2); set global long_query_time=@lqt_save; set global slow_query_log = 1;' > /var/log/mysqladmin.flush-logs 2>&1 fi endscript } ---------------------------------------------------------------------------- --------------------------------------------------------------------------- Current mysql log directories: --------------------------------------------------------------------------- ls -lh /var/log/ | egrep 'mysql|mysql-slowlog' egrep: warning: egrep is obsolescent; using grep -E -rw-------. 1 root root 0 Oct 5 18:05 mysqld.log --------------------------------------------------------------------------- --------------------------------------------------------------------------- ---------------------------------------------------------------------------- mysql logrotation /etc/logrotate.d/mysql & /etc/logrotate.d/mysql-slowlog setup completed ---------------------------------------------------------------------------- which: no figlet in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) new initial /etc/my.cnf ================================================= [client] socket=/var/lib/mysql/mysql.sock [mysql] max_allowed_packet = 64M [mysqld] local-infile=0 ignore_db_dirs=lost+found character-set-server=utf8 datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #bind-address=127.0.0.1 # optimized my.cnf for MariaDB 5.5.x # by eva2000 # centminmod.com tmpdir=/home/mysqltmp innodb=ON #skip-federated ##skip-pbxt ##skip-pbxt_statistics #skip-archive #skip-name-resolve #old_passwords back_log = 350 max_connections = 350 key_buffer_size = 256M myisam_sort_buffer_size = 256M myisam_max_sort_file_size = 2048M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_definition_cache = 8192 table_open_cache = 4096 thread_cache_size = 256 wait_timeout = 1800 connect_timeout = 10 tmp_table_size = 256M max_heap_table_size = 256M max_allowed_packet = 64M #max_seeks_for_key = 4294967295 #group_concat_max_len = 1024 max_length_for_sort_data = 1024 net_buffer_length = 16384 max_connect_errors = 100000 concurrent_insert = 2 read_rnd_buffer_size = 512K bulk_insert_buffer_size = 8M # query_cache boost for MariaDB >10.1.2+ # https://community.centminmod.com/posts/30811/ query_cache_limit = 1024K query_cache_size = 0 query_cache_type = 0 query_cache_min_res_unit = 2K query_prealloc_size = 262144 query_alloc_block_size = 65536 transaction_alloc_block_size = 8192 transaction_prealloc_size = 4096 default-storage-engine = InnoDB log_warnings=1 slow_query_log=0 long_query_time=1 slow_query_log_file=/var/lib/mysql/slowq.log log-error=/var/log/mysqld.log # innodb settings innodb_purge_threads=1 innodb_file_per_table = 1 innodb_open_files = 4000 innodb_data_file_path= ibdata1:10M:autoextend innodb_buffer_pool_size = 512M ## https://mariadb.com/kb/en/mariadb/xtradbinnodb-server-system-variables/#innodb_buffer_pool_instances #innodb_buffer_pool_instances=1 innodb_log_files_in_group = 2 innodb_log_file_size = 256M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 2 #innodb_thread_concurrency = 0 innodb_lock_wait_timeout=50 innodb_flush_method = O_DIRECT # 200 * # DISKS innodb_io_capacity = 300 innodb_io_capacity_max = 2000 innodb_read_io_threads = 4 innodb_write_io_threads = 2 innodb_flush_neighbors = 1 # mariadb settings [mariadb] #thread-handling = pool-of-threads #thread-pool-size= 20 #mysql --port=3307 --protocol=tcp #extra-port=3307 #extra-max-connections=1 userstat = 0 key_cache_segments = 1 aria_group_commit = none aria_group_commit_interval = 0 aria_log_file_size = 64M aria_log_purge_type = immediate aria_pagecache_buffer_size = 64M aria_sort_buffer_size = 64M [mariadb-5.5] innodb_file_per_table = 1 #ignore_db_dirs= query_cache_strip_comments=0 innodb_read_ahead = linear innodb_adaptive_flushing_method = estimate innodb_flush_neighbor_pages = 1 innodb_stats_update_need_lock = 0 innodb_log_block_size = 512 log_slow_filter =admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk [mysqld_safe] socket=/var/lib/mysql/mysql.sock log-error=/var/log/mysqld.log #nice = -5 open-files-limit = 8192 [mysqldump] #default-character-set=utf8 quick max_allowed_packet = 64M [myisamchk] tmpdir=/home/mysqltmp key_buffer = 256M sort_buffer = 32M read_buffer = 32M write_buffer = 32M [mysqlhotcopy] interactive-timeout [mariadb-10.0] innodb_file_per_table = 1 # 2 variables needed to switch from XtraDB to InnoDB plugins #plugin-load=ha_innodb #ignore_builtin_innodb ## MariaDB 10 only save and restore buffer pool pages ## warm up InnoDB buffer pool on server restarts #innodb_buffer_pool_dump_at_shutdown=1 #innodb_buffer_pool_load_at_startup=1 innodb_buffer_pool_populate=0 ## Disabled settings performance_schema=OFF innodb_stats_on_metadata=OFF innodb_sort_buffer_size=2M innodb_online_alter_log_max_size=128M query_cache_strip_comments=0 log_slow_filter =admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk [mariadb-10.4] #innodb_file_format = Barracuda innodb_default_row_format = dynamic innodb_file_per_table = 1 # performance regressions # https://jira.mariadb.org/browse/MDEV-16337 # https://jira.mariadb.org/browse/MDEV-20697 #join_cache_level=0 optimizer_use_condition_selectivity=1 ## wsrep specific # wsrep_on=OFF # wsrep_provider # wsrep_cluster_address # binlog_format=ROW # default_storage_engine=InnoDB # innodb_autoinc_lock_mode=2 # innodb_doublewrite=1 # query_cache_size=0 # 2 variables needed to switch from XtraDB to InnoDB plugins #plugin-load=ha_innodb #ignore_builtin_innodb ## MariaDB 10 only save and restore buffer pool pages ## warm up InnoDB buffer pool on server restarts innodb_buffer_pool_dump_at_shutdown=1 innodb_buffer_pool_load_at_startup=1 ## Disabled settings performance_schema=OFF innodb_stats_on_metadata=OFF innodb_sort_buffer_size=2M innodb_online_alter_log_max_size=128M query_cache_strip_comments=0 log_slow_filter =admin,filesort,filesort_on_disk,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk # Defragmenting unused space on InnoDB tablespace innodb_defragment=1 innodb_defragment_n_pages=7 innodb_defragment_stats_accuracy=0 innodb_defragment_fill_factor_n_recs=20 innodb_defragment_fill_factor=0.9 innodb_defragment_frequency=40 # page compression # 10.1+ https://mariadb.com/kb/en/mariadb/compression/ #innodb_compression_algorithm=zlib #innodb_use_fallocate=0 #innodb_use_mtflush=0 #innodb_mtflush_threads=4 ================================================= exclude line exists... adding exclude line for mysql* (B************************************************* * Starting MariaDB Secure Installation (B************************************************* /usr/local/src/centminmod/inc/mariadb_install104.inc: line 1458: mysql_upgrade: command not found systemctl restart mariadb.service Failed to restart mariadb.service: Unit mariadb.service not found. /usr/local/src/centminmod/tools/setio.sh: line 93: mysql: command not found /usr/local/src/centminmod/tools/setio.sh: line 94: mysqladmin: command not found /usr/local/src/centminmod/tools/setio.sh: line 95: mysqladmin: command not found Installed: fio-3.36-5.el10.x86_64 fio-engine-http-3.36-5.el10.x86_64 fio-engine-libaio-3.36-5.el10.x86_64 fio-engine-nbd-3.36-5.el10.x86_64 fio-engine-rados-3.36-5.el10.x86_64 fio-engine-rbd-3.36-5.el10.x86_64 fio-engine-rdma-3.36-5.el10.x86_64 libnbd-1.20.3-2.el10.x86_64 librados2-2:18.2.1-4.el10.x86_64 librbd1-2:18.2.1-4.el10.x86_64 librdmacm-54.0-2.el10_0.x86_64 Failed to start mariadb.service: Unit mariadb.service not found. /usr/local/src/centminmod/tools/setio.sh: line 778: /usr/bin/mysql: No such file or directory Full Reads: 141241 Full Writes: 118724 /usr/local/src/centminmod/tools/setio.sh: line 622: mysqladmin: command not found /usr/local/src/centminmod/tools/setio.sh: line 632: mysqladmin: command not found innodb_io_capacity = 2900 +------------------------+-------+ /etc/my.cnf adjustment +------------------------+-------+ existing value: /usr/local/src/centminmod/tools/setio.sh: line 749: /usr/bin/mysql: No such file or directory new value: /usr/local/src/centminmod/tools/setio.sh: line 755: /usr/bin/mysql: No such file or directory /usr/local/src/centminmod/tools/setio.sh: line 768: /usr/bin/mysql: No such file or directory /usr/local/src/centminmod/tools/setio.sh: line 769: /usr/bin/mysql: No such file or directory +------------------------+-------+ innodb io threads adjustment +------------------------+-------+ existing value: +------------------------+-------+ innodb_read_io_threads = 4 innodb_write_io_threads = 2 +------------------------+-------+ new value: +------------------------+-------+ innodb_read_io_threads = 2 innodb_write_io_threads = 2 +------------------------+-------+ Restart MySQL server for io thread changes /usr/local/src/centminmod/tools/setio.sh: line 786: /usr/bin/mysql: No such file or directory ************************************************* * MariaDB installed (B************************************************* Failed to start mariadb.service: Unit mariadb.service not found. /usr/local/src/centminmod/inc/mysqlsecure.inc: line 15: mysql: command not found ------------------------------------------------------- (BMySQL root user password set (BMySQL root user added to /root/.my.cnf (B------------------------------------------------------- (BMySQL root password: 9pjLutlX0LN8O9B74NWDQq6mSyUuGd9br3Y (B------------------------------------------------------- (B************************************************* * Installing PHP (B************************************************* PHP VERSION ID: 80326 Initial Install PHPMVER: 8.3 System is not CentOS 7 or PHP version is below 8.3.16. No patches applied. buildconf: Checking installation buildconf: autoconf version 2.71 (ok) buildconf: Forcing buildconf. The configure files will be regenerated. buildconf: Cleaning cache and configure files buildconf: Rebuilding configure buildconf: Rebuilding main/php_config.h.in buildconf: Run ./configure to proceed with customizing the PHP build. PHP configure stage install oniguruma5php oniguruma5php-devel Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Error: Unknown repo: 'remi' oni_err=1 Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. 33 files removed Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Error: Unknown repo: 'remi' oni_err=1 export ONIG_CFLAGS='-I/usr/include' export ONIG_LIBS='-L/usr/lib64 -lonig' ls -lAh /usr/include | grep onig ls -lAh /usr/lib64 | grep onig lrwxrwxrwx. 1 root root 16 Oct 29 2024 libonig.so.5 -> libonig.so.5.4.0 -rwxr-xr-x. 1 root root 598K Oct 29 2024 libonig.so.5.4.0 egrep: warning: egrep is obsolescent; using grep -E Installed: sqlite-3.46.1-5.el10_0.x86_64 sqlite-devel-3.46.1-5.el10_0.x86_64 Installed: libedit-devel-3.1-52.20230828cvs.el10.x86_64 ncurses-c++-libs-6.4-14.20240127.el10.x86_64 ncurses-devel-6.4-14.20240127.el10.x86_64 readline-devel-8.2-11.el10.x86_64 real 0m1.021s user 0m0.686s sys 0m0.262s Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:03 ago on Sun 05 Oct 2025 06:05:20 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: xxhash x86_64 0.8.3-1.el10_0 epel 58 k xxhash-devel x86_64 0.8.3-1.el10_0 epel 61 k Installing dependencies: xxhash-libs x86_64 0.8.3-1.el10_0 epel 38 k Transaction Summary ================================================================================ Install 3 Packages Total download size: 157 k Installed size: 479 k Downloading Packages: (1/3): xxhash-0.8.3-1.el10_0.x86_64.rpm 1.2 MB/s | 58 kB 00:00 (2/3): xxhash-devel-0.8.3-1.el10_0.x86_64.rpm 770 kB/s | 61 kB 00:00 (3/3): xxhash-libs-0.8.3-1.el10_0.x86_64.rpm 364 kB/s | 38 kB 00:00 -------------------------------------------------------------------------------- Total 323 kB/s | 157 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : xxhash-libs-0.8.3-1.el10_0.x86_64 1/3 Installing : xxhash-devel-0.8.3-1.el10_0.x86_64 2/3 Installing : xxhash-0.8.3-1.el10_0.x86_64 3/3 Running scriptlet: xxhash-0.8.3-1.el10_0.x86_64 3/3 Installed: xxhash-0.8.3-1.el10_0.x86_64 xxhash-devel-0.8.3-1.el10_0.x86_64 xxhash-libs-0.8.3-1.el10_0.x86_64 Complete! real 0m1.576s user 0m0.862s sys 0m0.220s Installed: libgpg-error-devel-1.50-2.el10.x86_64 libxslt-devel-1.1.39-8.el10_0.x86_64 NEWLIBICU=y NEWLIBICU=y Error: Unknown repo: 'remi' Installed: aspell-12:0.60.8.1-3.el10.x86_64 aspell-devel-12:0.60.8.1-3.el10.x86_64 Error: Unable to find a match: recode recode-devel Installed: libtidy-5.8.0-9.el10_0.x86_64 libtidy-devel-5.8.0-9.el10_0.x86_64 Error: Unable to find a match: enchant enchant-devel Error: Unable to find a match: expect-devel Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:10 ago on Sun 05 Oct 2025 06:05:19 PM UTC. No match for argument: t1lib No match for argument: t1lib-devel Error: Unable to find a match: t1lib t1lib-devel real 0m0.283s user 0m0.220s sys 0m0.060s PHPDEBUGMODE: disabled – reverting tweaks PHPDEBUGMODE: deleting stale core files in /tmp gcc -c -Q -march=native --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_php_native.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= znver2 -mavx [enabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [enabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [enabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [enabled] -msse4 [enabled] -msse4.1 [enabled] -msse4.2 [enabled] -msse4a [enabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [enabled] -mtune-ctrl= -mtune= znver2 Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: gcc -c -Q -march=x86-64 --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_php_x86-64.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= x86-64 -mavx [disabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [disabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [disabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [disabled] -msse4 [disabled] -msse4.1 [disabled] -msse4.2 [disabled] -msse4a [disabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [disabled] -mtune-ctrl= -mtune= generic Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: -march= znver2 | -march= x86-64 -mavx [enabled] | -mavx [disabled] -mavx2 [enabled] | -mavx2 [disabled] -mpclmul [enabled] | -mpclmul [disabled] -msse3 [enabled] | -msse3 [disabled] -msse4 [enabled] | -msse4 [disabled] -msse4.1 [enabled] | -msse4.1 [disabled] -msse4.2 [enabled] | -msse4.2 [disabled] -msse4a [enabled] | -msse4a [disabled] -mssse3 [enabled] | -mssse3 [disabled] -mtune= znver2 | -mtune= generic /usr/local/src/centminmod/inc/php_configure.inc: line 3031: CP: command not found egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= znver2 | -march= x86-64 -mavx [enabled] | -mavx [disabled] -mavx2 [enabled] | -mavx2 [disabled] -mpclmul [enabled] | -mpclmul [disabled] -msse4 [enabled] | -msse4 [disabled] -msse4.1 [enabled] | -msse4.1 [disabled] -msse4.2 [enabled] | -msse4.2 [disabled] -msse4a [enabled] | -msse4a [disabled] -mtune= znver2 | -mtune= generic egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - egrep: warning: egrep is obsolescent; using grep -E gcc -c -Q -march=x86-64 -mavx -mavx2 -mpclmul -msse4 -msse4.1 -msse4.2 -msse4a --help=target | egrep '\-mtune|\-mprefer-vector-width|\-march|\-msse|\-msse2|\-msse2avx|\-msse3|\-mavx|\-msse4|\-mssse3|\-mpclmul' | tee /root/centminlogs/gcc_php_x86-64-non-native.log egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - grep: warning: stray \ before - -march= x86-64 -mavx [enabled] -mavx10.1 -mavx10.1-256 -mavx10.1-256 [disabled] -mavx10.1-512 [disabled] -mavx2 [enabled] -mavx256-split-unaligned-load [disabled] -mavx256-split-unaligned-store [disabled] -mavx5124fmaps [disabled] -mavx5124vnniw [disabled] -mavx512bf16 [disabled] -mavx512bitalg [disabled] -mavx512bw [disabled] -mavx512cd [disabled] -mavx512dq [disabled] -mavx512er [disabled] -mavx512f [disabled] -mavx512fp16 [disabled] -mavx512ifma [disabled] -mavx512pf [disabled] -mavx512vbmi [disabled] -mavx512vbmi2 [disabled] -mavx512vl [disabled] -mavx512vnni [disabled] -mavx512vp2intersect [disabled] -mavx512vpopcntdq [disabled] -mavxifma [disabled] -mavxneconvert [disabled] -mavxvnni [disabled] -mavxvnniint16 [disabled] -mavxvnniint8 [disabled] -mgather -mtune-ctrl=use_gather -mpclmul [enabled] -mprefer-avx128 -mprefer-vector-width=128 -mprefer-vector-width= none -mscatter -mtune-ctrl=use_scatter -msse [enabled] -msse2 [enabled] -msse2avx [disabled] -msse3 [enabled] -msse4 [enabled] -msse4.1 [enabled] -msse4.2 [enabled] -msse4a [enabled] -msse5 -mavx -msseregparm [disabled] -mssse3 [enabled] -mtune-ctrl= -mtune= generic Known preferred register vector length (to use with the -mprefer-vector-width= option): Known valid arguments for -march= option: Known valid arguments for -mtune= option: GCC_NONNATIVEFLAGS= -mavx -mavx2 -mpclmul -msse4 -msse4.1 -msse4.2 -msse4a 3 SET_PHPEXTRA_CFLAGS=" -Wno-deprecated-declarations" export CFLAGS="-O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations" export CXXFLAGS="-O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations" PHP_OPENSSLOPT install check 8.3 80326 PHP_OPENSSLOPT upgrade check 80326 Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:11 ago on Sun 05 Oct 2025 06:05:19 PM UTC. No match for argument: libc-client-devel Error: Unable to find a match: libc-client-devel real 0m0.299s user 0m0.224s sys 0m0.071s libzip check PHPMVER = 8.3 libzip check PHPMUVER = php 8.x libzip /svr-setup /svr-setup/php-8.3.26/fpm-build wget https://github.com/jedisct1/libsodium/releases/download/1.0.20-RELEASE/libsodium-1.0.20.tar.gz --tries=3 --2025-10-05 18:05:30-- https://github.com/jedisct1/libsodium/releases/download/1.0.20-RELEASE/libsodium-1.0.20.tar.gz Resolving github.com (github.com)... 140.82.112.4 Connecting to github.com (github.com)|140.82.112.4|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://release-assets.githubusercontent.com/github-production-release-asset/7710647/2ecbc554-ff88-481b-b802-3b1f0c9f0c48?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-10-05T18%3A56%3A31Z&rscd=attachment%3B+filename%3Dlibsodium-1.0.20.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-10-05T17%3A56%3A03Z&ske=2025-10-05T18%3A56%3A31Z&sks=b&skv=2018-11-09&sig=m63glxc9xAg4j%2FVhQ5aW7rGONugh7VgJM89QeXL1Pdo%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTY4NzgzMCwibmJmIjoxNzU5Njg3NTMwLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.RwoESA3o5gRrFNpAJ-rfnd8vUnRtXybGWQZZiAcS_hY&response-content-disposition=attachment%3B%20filename%3Dlibsodium-1.0.20.tar.gz&response-content-type=application%2Foctet-stream [following] --2025-10-05 18:05:30-- https://release-assets.githubusercontent.com/github-production-release-asset/7710647/2ecbc554-ff88-481b-b802-3b1f0c9f0c48?sp=r&sv=2018-11-09&sr=b&spr=https&se=2025-10-05T18%3A56%3A31Z&rscd=attachment%3B+filename%3Dlibsodium-1.0.20.tar.gz&rsct=application%2Foctet-stream&skoid=96c2d410-5711-43a1-aedd-ab1947aa7ab0&sktid=398a6654-997b-47e9-b12b-9515b896b4de&skt=2025-10-05T17%3A56%3A03Z&ske=2025-10-05T18%3A56%3A31Z&sks=b&skv=2018-11-09&sig=m63glxc9xAg4j%2FVhQ5aW7rGONugh7VgJM89QeXL1Pdo%3D&jwt=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmVsZWFzZS1hc3NldHMuZ2l0aHVidXNlcmNvbnRlbnQuY29tIiwia2V5Ijoia2V5MSIsImV4cCI6MTc1OTY4NzgzMCwibmJmIjoxNzU5Njg3NTMwLCJwYXRoIjoicmVsZWFzZWFzc2V0cHJvZHVjdGlvbi5ibG9iLmNvcmUud2luZG93cy5uZXQifQ.RwoESA3o5gRrFNpAJ-rfnd8vUnRtXybGWQZZiAcS_hY&response-content-disposition=attachment%3B%20filename%3Dlibsodium-1.0.20.tar.gz&response-content-type=application%2Foctet-stream Resolving release-assets.githubusercontent.com (release-assets.githubusercontent.com)... 185.199.111.133, 185.199.108.133, 185.199.109.133, ... Connecting to release-assets.githubusercontent.com (release-assets.githubusercontent.com)|185.199.111.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1925167 (1.8M) [application/octet-stream] Saving to: ‘libsodium-1.0.20.tar.gz’ 0K .......... .......... .......... .......... .......... 2% 2.98M 1s 50K .......... .......... .......... .......... .......... 5% 3.46M 1s 100K .......... .......... .......... .......... .......... 7% 14.1M 0s 150K .......... .......... .......... .......... .......... 10% 5.80M 0s 200K .......... .......... .......... .......... .......... 13% 18.3M 0s 250K .......... .......... .......... .......... .......... 15% 25.0M 0s 300K .......... .......... .......... .......... .......... 18% 21.6M 0s 350K .......... .......... .......... .......... .......... 21% 7.38M 0s 400K .......... .......... .......... .......... .......... 23% 39.1M 0s 450K .......... .......... .......... .......... .......... 26% 46.9M 0s 500K .......... .......... .......... .......... .......... 29% 34.6M 0s 550K .......... .......... .......... .......... .......... 31% 49.2M 0s 600K .......... .......... .......... .......... .......... 34% 123M 0s 650K .......... .......... .......... .......... .......... 37% 44.3M 0s 700K .......... .......... .......... .......... .......... 39% 42.1M 0s 750K .......... .......... .......... .......... .......... 42% 7.77M 0s 800K .......... .......... .......... .......... .......... 45% 136M 0s 850K .......... .......... .......... .......... .......... 47% 111M 0s 900K .......... .......... .......... .......... .......... 50% 51.5M 0s 950K .......... .......... .......... .......... .......... 53% 53.7M 0s 1000K .......... .......... .......... .......... .......... 55% 116M 0s 1050K .......... .......... .......... .......... .......... 58% 165M 0s 1100K .......... .......... .......... .......... .......... 61% 67.5M 0s 1150K .......... .......... .......... .......... .......... 63% 55.3M 0s 1200K .......... .......... .......... .......... .......... 66% 164M 0s 1250K .......... .......... .......... .......... .......... 69% 57.4M 0s 1300K .......... .......... .......... .......... .......... 71% 195M 0s 1350K .......... .......... .......... .......... .......... 74% 180M 0s 1400K .......... .......... .......... .......... .......... 77% 68.7M 0s 1450K .......... .......... .......... .......... .......... 79% 175M 0s 1500K .......... .......... .......... .......... .......... 82% 107M 0s 1550K .......... .......... .......... .......... .......... 85% 244M 0s 1600K .......... .......... .......... .......... .......... 87% 8.63M 0s 1650K .......... .......... .......... .......... .......... 90% 138M 0s 1700K .......... .......... .......... .......... .......... 93% 101M 0s 1750K .......... .......... .......... .......... .......... 95% 228M 0s 1800K .......... .......... .......... .......... .......... 98% 136M 0s 1850K .......... .......... .......... 100% 110M=0.09s 2025-10-05 18:05:30 (21.6 MB/s) - ‘libsodium-1.0.20.tar.gz’ saved [1925167/1925167] Download done. (Bmake: *** No rule to make target 'clean'. Stop. checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '0' is supported by ustar format... yes checking whether GID '0' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether make supports nested variables... (cached) yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking dependency style of gcc... gcc3 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for a sed that does not truncate output... /bin/sed checking how to run the C preprocessor... gcc -E checking for egrep -e... /bin/grep -E checking whether gcc is Clang... no checking whether pthreads work with "-pthread" and "-lpthread"... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for variable-length arrays... yes checking for __wasi__ defined... no checking whether C compiler accepts -Werror... yes checking whether to add -D_FORTIFY_SOURCE=3 to CPPFLAGS... yes checking whether C compiler accepts -fvisibility=hidden... yes checking whether C compiler accepts -fPIC... yes checking whether C compiler accepts -fPIE... yes checking whether the linker accepts -pie... yes checking whether C compiler accepts -fno-strict-aliasing... yes checking whether C compiler accepts -fno-strict-overflow... yes checking whether C compiler accepts -fstack-protector... yes checking whether the linker accepts -fstack-protector... yes checking whether C compiler accepts -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -pthread -fvisibility=hidden -fPIC -fPIE -fno-strict-aliasing -fno-strict-overflow -fstack-protector -Wall... yes checking whether C compiler accepts -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -pthread -fvisibility=hidden -fPIC -fPIE -fno-strict-aliasing -fno-strict-overflow -fstack-protector -Wno-deprecated-declarations... yes checking whether C compiler accepts -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -pthread -fvisibility=hidden -fPIC -fPIE -fno-strict-aliasing -fno-strict-overflow -fstack-protector -Wno-deprecated-declarations -Wno-unknown-pragmas... yes checking for clang... no checking whether C compiler accepts -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -pthread -fvisibility=hidden -fPIC -fPIE -fno-strict-aliasing -fno-strict-overflow -fstack-protector -Wall -Wextra... yes checking whether C compiler accepts -Wextra -Warray-bounds... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wshorten-64-to-32... no checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wsometimes-uninitialized... no checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wstrict-prototypes... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wstrict-prototypes -Wswitch-enum... yes checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wstrict-prototypes -Wswitch-enum -Wvariable-decl... no checking whether C compiler accepts -Wextra -Warray-bounds -Wbad-function-cast -Wcast-qual -Wdiv-by-zero -Wduplicated-branches -Wduplicated-cond -Wfloat-equal -Wformat=2 -Wlogical-op -Wmaybe-uninitialized -Wmisleading-indentation -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-type-limits -Wno-unknown-pragmas -Wnormalized=id -Wnull-dereference -Wold-style-declaration -Wpointer-arith -Wredundant-decls -Wrestrict -Wstrict-prototypes -Wswitch-enum -Wwrite-strings... yes checking whether the linker accepts -Wl,-z,relro... yes checking whether the linker accepts -Wl,-z,now... yes checking whether the linker accepts -Wl,-z,noexecstack... yes checking whether segmentation violations can be caught... yes checking whether SIGABRT can be caught... yes checking for thread local storage (TLS) class... _Thread_local thread local storage is supported checking whether C compiler accepts -ftls-model=local-dynamic... yes checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B checking the name lister (/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for ar... (cached) ar checking for ARM64 target... no checking whether C compiler accepts -mmmx... yes checking for MMX instructions set... yes checking whether C compiler accepts -mmmx... (cached) yes checking whether C compiler accepts -msse2... yes checking for SSE2 instructions set... yes checking whether C compiler accepts -msse2... (cached) yes checking whether C compiler accepts -msse3... yes checking for SSE3 instructions set... yes checking whether C compiler accepts -msse3... (cached) yes checking whether C compiler accepts -mssse3... yes checking for SSSE3 instructions set... yes checking whether C compiler accepts -mssse3... (cached) yes checking whether C compiler accepts -msse4.1... yes checking for SSE4.1 instructions set... yes checking whether C compiler accepts -msse4.1... (cached) yes checking whether C compiler accepts -mavx... yes checking for AVX instructions set... yes checking whether C compiler accepts -mavx... (cached) yes checking whether C compiler accepts -mavx2... yes checking for AVX2 instructions set... yes checking whether C compiler accepts -mavx2... (cached) yes checking if _mm256_broadcastsi128_si256 is correctly defined... yes checking whether C compiler accepts -mavx512f... yes checking for AVX512F instructions set... yes checking whether C compiler accepts -mavx512f... (cached) yes checking whether C compiler accepts -maes... yes checking whether C compiler accepts -mpclmul... yes checking for AESNI instructions set and PCLMULQDQ... yes checking whether C compiler accepts -maes... (cached) yes checking whether C compiler accepts -mpclmul... (cached) yes checking whether C compiler accepts -mrdrnd... yes checking for RDRAND... yes checking whether C compiler accepts -mrdrnd... (cached) yes checking for sys/mman.h... yes checking for sys/param.h... yes checking for sys/random.h... yes checking for intrin.h... no checking for sys/auxv.h... yes checking for CommonCrypto/CommonRandom.h... no checking for cet.h... yes checking if _xgetbv() is available... no checking for inline... inline checking whether byte ordering is bigendian... (cached) no checking whether __STDC_LIMIT_MACROS is required... no checking whether we can use inline asm code... yes no checking whether we can use x86_64 asm code... yes checking whether we can assemble AVX opcodes... yes checking for 128-bit arithmetic... yes checking for cpuid instruction... yes checking if the .private_extern asm directive is supported... no checking if the .hidden asm directive is supported... yes checking if weak symbols are supported... yes checking if atomic operations are supported... yes checking if C11 memory fences are supported... yes checking if gcc memory fences are supported... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for arc4random... yes checking for arc4random_buf... yes checking for mmap... yes checking for mlock... yes checking for madvise... yes checking for mprotect... yes checking for raise... yes checking for sysconf... yes checking for getrandom with a standard API... yes checking for getrandom... yes checking for getentropy with a standard API... yes checking for getentropy... yes checking for getpid... yes checking for getauxval... yes checking for elf_aux_info... no checking for posix_memalign... yes checking for nanosleep... yes checking for clock_gettime... yes checking for memset_s... no checking for explicit_bzero... yes checking for memset_explicit... no checking for explicit_memset... no checking if gcc/ld supports -Wl,--output-def... no checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating builds/Makefile config.status: creating contrib/Makefile config.status: creating dist-build/Makefile config.status: creating libsodium.pc config.status: creating libsodium-uninstalled.pc config.status: creating src/Makefile config.status: creating src/libsodium/Makefile config.status: creating src/libsodium/include/Makefile config.status: creating src/libsodium/include/sodium/version.h config.status: creating test/default/Makefile config.status: creating test/Makefile config.status: executing depfiles commands config.status: executing libtool commands Making all in builds make[1]: Entering directory '/svr-setup/libsodium-1.0.20/builds' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/builds' Making all in contrib make[1]: Entering directory '/svr-setup/libsodium-1.0.20/contrib' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/contrib' Making all in dist-build make[1]: Entering directory '/svr-setup/libsodium-1.0.20/dist-build' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/dist-build' Making all in src make[1]: Entering directory '/svr-setup/libsodium-1.0.20/src' Making all in libsodium make[2]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium' Making all in include make[3]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[3]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium' CC crypto_shorthash/siphash24/libsodium_la-shorthash_siphashx24.lo CC crypto_shorthash/siphash24/ref/libsodium_la-shorthash_siphashx24_ref.lo CC crypto_sign/ed25519/ref10/libsodium_la-obsolete.lo CC crypto_aead/aegis128l/libaesni_la-aegis128l_aesni.lo CC crypto_aead/aegis256/libaesni_la-aegis256_aesni.lo CC crypto_aead/aegis128l/libarmcrypto_la-aegis128l_armcrypto.lo CC crypto_aead/aegis256/libarmcrypto_la-aegis256_armcrypto.lo CC crypto_generichash/blake2b/ref/libssse3_la-blake2b-compress-ssse3.lo CC crypto_pwhash/argon2/libssse3_la-argon2-fill-block-ssse3.lo CC crypto_generichash/blake2b/ref/libsse41_la-blake2b-compress-sse41.lo CC crypto_generichash/blake2b/ref/libavx2_la-blake2b-compress-avx2.lo CC crypto_pwhash/argon2/libavx2_la-argon2-fill-block-avx2.lo CC crypto_stream/chacha20/dolbeau/libavx2_la-chacha20_dolbeau-avx2.lo CC crypto_pwhash/argon2/libavx512f_la-argon2-fill-block-avx512f.lo CC crypto_aead/aegis128l/libsodium_la-aead_aegis128l.lo CC crypto_aead/aegis128l/libsodium_la-aegis128l_soft.lo CC crypto_aead/aegis256/libsodium_la-aead_aegis256.lo CC crypto_aead/aegis256/libsodium_la-aegis256_soft.lo CC crypto_aead/aes256gcm/libsodium_la-aead_aes256gcm.lo CC crypto_aead/chacha20poly1305/libsodium_la-aead_chacha20poly1305.lo CC crypto_aead/xchacha20poly1305/libsodium_la-aead_xchacha20poly1305.lo CC crypto_auth/libsodium_la-crypto_auth.lo CC crypto_auth/hmacsha256/libsodium_la-auth_hmacsha256.lo CC crypto_auth/hmacsha512/libsodium_la-auth_hmacsha512.lo CC crypto_auth/hmacsha512256/libsodium_la-auth_hmacsha512256.lo CC crypto_box/libsodium_la-crypto_box.lo CC crypto_box/libsodium_la-crypto_box_easy.lo CC crypto_box/libsodium_la-crypto_box_seal.lo CC crypto_box/curve25519xsalsa20poly1305/libsodium_la-box_curve25519xsalsa20poly1305.lo CC crypto_core/ed25519/ref10/libsodium_la-ed25519_ref10.lo CC crypto_core/hchacha20/libsodium_la-core_hchacha20.lo CC crypto_core/hsalsa20/ref2/libsodium_la-core_hsalsa20_ref2.lo CC crypto_core/hsalsa20/libsodium_la-core_hsalsa20.lo CC crypto_core/salsa/ref/libsodium_la-core_salsa_ref.lo CC crypto_core/softaes/libsodium_la-softaes.lo CC crypto_generichash/libsodium_la-crypto_generichash.lo CC crypto_generichash/blake2b/libsodium_la-generichash_blake2.lo CC crypto_generichash/blake2b/ref/libsodium_la-blake2b-compress-ref.lo CC crypto_generichash/blake2b/ref/libsodium_la-blake2b-ref.lo CC crypto_generichash/blake2b/ref/libsodium_la-generichash_blake2b.lo CC crypto_hash/libsodium_la-crypto_hash.lo CC crypto_hash/sha256/libsodium_la-hash_sha256.lo CC crypto_hash/sha256/cp/libsodium_la-hash_sha256_cp.lo CC crypto_hash/sha512/libsodium_la-hash_sha512.lo CC crypto_hash/sha512/cp/libsodium_la-hash_sha512_cp.lo CC crypto_kdf/blake2b/libsodium_la-kdf_blake2b.lo CC crypto_kdf/libsodium_la-crypto_kdf.lo CC crypto_kdf/hkdf/libsodium_la-kdf_hkdf_sha256.lo CC crypto_kdf/hkdf/libsodium_la-kdf_hkdf_sha512.lo CC crypto_kx/libsodium_la-crypto_kx.lo CC crypto_onetimeauth/libsodium_la-crypto_onetimeauth.lo CC crypto_onetimeauth/poly1305/libsodium_la-onetimeauth_poly1305.lo CC crypto_onetimeauth/poly1305/donna/libsodium_la-poly1305_donna.lo CC crypto_pwhash/argon2/libsodium_la-argon2-core.lo CC crypto_pwhash/argon2/libsodium_la-argon2-encoding.lo CC crypto_pwhash/argon2/libsodium_la-argon2-fill-block-ref.lo CC crypto_pwhash/argon2/libsodium_la-argon2.lo CC crypto_pwhash/argon2/libsodium_la-blake2b-long.lo CC crypto_pwhash/argon2/libsodium_la-pwhash_argon2i.lo CC crypto_pwhash/argon2/libsodium_la-pwhash_argon2id.lo CC crypto_pwhash/libsodium_la-crypto_pwhash.lo CC crypto_scalarmult/libsodium_la-crypto_scalarmult.lo CC crypto_scalarmult/curve25519/ref10/libsodium_la-x25519_ref10.lo CC crypto_scalarmult/curve25519/libsodium_la-scalarmult_curve25519.lo CC crypto_secretbox/libsodium_la-crypto_secretbox.lo CC crypto_secretbox/libsodium_la-crypto_secretbox_easy.lo CC crypto_secretbox/xsalsa20poly1305/libsodium_la-secretbox_xsalsa20poly1305.lo CC crypto_secretstream/xchacha20poly1305/libsodium_la-secretstream_xchacha20poly1305.lo CC crypto_shorthash/libsodium_la-crypto_shorthash.lo CC crypto_shorthash/siphash24/libsodium_la-shorthash_siphash24.lo CC crypto_shorthash/siphash24/ref/libsodium_la-shorthash_siphash24_ref.lo CC crypto_sign/libsodium_la-crypto_sign.lo CC crypto_sign/ed25519/libsodium_la-sign_ed25519.lo CC crypto_sign/ed25519/ref10/libsodium_la-keypair.lo CC crypto_sign/ed25519/ref10/libsodium_la-open.lo CC crypto_sign/ed25519/ref10/libsodium_la-sign.lo CC crypto_stream/chacha20/libsodium_la-stream_chacha20.lo CC crypto_stream/chacha20/ref/libsodium_la-chacha20_ref.lo CC crypto_stream/libsodium_la-crypto_stream.lo CC crypto_stream/salsa20/libsodium_la-stream_salsa20.lo CC crypto_stream/xsalsa20/libsodium_la-stream_xsalsa20.lo CC crypto_verify/libsodium_la-verify.lo CC randombytes/libsodium_la-randombytes.lo CC sodium/libsodium_la-codecs.lo CC sodium/libsodium_la-core.lo CC sodium/libsodium_la-runtime.lo CC sodium/libsodium_la-utils.lo CC sodium/libsodium_la-version.lo CPPAS crypto_stream/salsa20/xmm6/libsodium_la-salsa20_xmm6-asm.lo CC crypto_stream/salsa20/xmm6/libsodium_la-salsa20_xmm6.lo CC crypto_scalarmult/curve25519/sandy2x/libsodium_la-curve25519_sandy2x.lo CC crypto_scalarmult/curve25519/sandy2x/libsodium_la-fe51_invert.lo CC crypto_scalarmult/curve25519/sandy2x/libsodium_la-fe_frombytes_sandy2x.lo CPPAS crypto_scalarmult/curve25519/sandy2x/libsodium_la-sandy2x.lo CC crypto_box/curve25519xchacha20poly1305/libsodium_la-box_curve25519xchacha20poly1305.lo CC crypto_box/curve25519xchacha20poly1305/libsodium_la-box_seal_curve25519xchacha20poly1305.lo CC crypto_core/ed25519/libsodium_la-core_ed25519.lo CC crypto_core/ed25519/libsodium_la-core_ristretto255.lo CC crypto_pwhash/scryptsalsa208sha256/libsodium_la-crypto_scrypt-common.lo CC crypto_pwhash/scryptsalsa208sha256/libsodium_la-scrypt_platform.lo CC crypto_pwhash/scryptsalsa208sha256/libsodium_la-pbkdf2-sha256.lo CC crypto_pwhash/scryptsalsa208sha256/libsodium_la-pwhash_scryptsalsa208sha256.lo CC crypto_pwhash/scryptsalsa208sha256/nosse/libsodium_la-pwhash_scryptsalsa208sha256_nosse.lo CC crypto_scalarmult/ed25519/ref10/libsodium_la-scalarmult_ed25519_ref10.lo CC crypto_scalarmult/ristretto255/ref10/libsodium_la-scalarmult_ristretto255_ref10.lo CC crypto_secretbox/xchacha20poly1305/libsodium_la-secretbox_xchacha20poly1305.lo CC crypto_stream/salsa2012/ref/libsodium_la-stream_salsa2012_ref.lo CC crypto_stream/salsa2012/libsodium_la-stream_salsa2012.lo CC crypto_stream/salsa208/ref/libsodium_la-stream_salsa208_ref.lo CC crypto_stream/salsa208/libsodium_la-stream_salsa208.lo CC crypto_stream/xchacha20/libsodium_la-stream_xchacha20.lo CC randombytes/sysrandom/libsodium_la-randombytes_sysrandom.lo CC crypto_aead/aes256gcm/aesni/libaesni_la-aead_aes256gcm_aesni.lo CC crypto_aead/aes256gcm/armcrypto/libarmcrypto_la-aead_aes256gcm_armcrypto.lo CC crypto_onetimeauth/poly1305/sse2/libsse2_la-poly1305_sse2.lo CC crypto_pwhash/scryptsalsa208sha256/sse/libsse2_la-pwhash_scryptsalsa208sha256_sse.lo CC crypto_stream/chacha20/dolbeau/libssse3_la-chacha20_dolbeau-ssse3.lo CCLD libsse41.la CC crypto_stream/salsa20/xmm6int/libavx2_la-salsa20_xmm6int-avx2.lo libtool: warning: '-version-info/-version-number' is ignored for convenience libraries CCLD libavx512f.la libtool: warning: '-version-info/-version-number' is ignored for convenience libraries CC randombytes/internal/librdrand_la-randombytes_internal_random.lo CCLD libaesni.la CCLD libarmcrypto.la libtool: warning: '-version-info/-version-number' is ignored for convenience libraries libtool: warning: '-version-info/-version-number' is ignored for convenience libraries CCLD libsse2.la CCLD libssse3.la libtool: warning: '-version-info/-version-number' is ignored for convenience libraries libtool: warning: '-version-info/-version-number' is ignored for convenience libraries CCLD libavx2.la CCLD librdrand.la libtool: warning: '-version-info/-version-number' is ignored for convenience libraries libtool: warning: '-version-info/-version-number' is ignored for convenience libraries CCLD libsodium.la make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/src' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/src' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/src' Making all in test make[1]: Entering directory '/svr-setup/libsodium-1.0.20/test' Making all in default make[2]: Entering directory '/svr-setup/libsodium-1.0.20/test/default' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/test/default' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/test' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/test' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/test' make[1]: Entering directory '/svr-setup/libsodium-1.0.20' make[1]: Nothing to be done for 'all-am'. make[1]: Leaving directory '/svr-setup/libsodium-1.0.20' Making install in builds make[1]: Entering directory '/svr-setup/libsodium-1.0.20/builds' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/builds' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/builds' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/builds' Making install in contrib make[1]: Entering directory '/svr-setup/libsodium-1.0.20/contrib' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/contrib' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/contrib' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/contrib' Making install in dist-build make[1]: Entering directory '/svr-setup/libsodium-1.0.20/dist-build' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/dist-build' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/dist-build' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/dist-build' Making install in src make[1]: Entering directory '/svr-setup/libsodium-1.0.20/src' Making install in libsodium make[2]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium' Making install in include make[3]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[4]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/include' /bin/mkdir -p '/usr/local/include/sodium' /bin/install -c -m 644 sodium/core.h sodium/crypto_aead_aes256gcm.h sodium/crypto_aead_aegis128l.h sodium/crypto_aead_aegis256.h sodium/crypto_aead_chacha20poly1305.h sodium/crypto_aead_xchacha20poly1305.h sodium/crypto_auth.h sodium/crypto_auth_hmacsha256.h sodium/crypto_auth_hmacsha512.h sodium/crypto_auth_hmacsha512256.h sodium/crypto_box.h sodium/crypto_box_curve25519xchacha20poly1305.h sodium/crypto_box_curve25519xsalsa20poly1305.h sodium/crypto_core_ed25519.h sodium/crypto_core_ristretto255.h sodium/crypto_core_hchacha20.h sodium/crypto_core_hsalsa20.h sodium/crypto_core_salsa20.h sodium/crypto_core_salsa2012.h sodium/crypto_core_salsa208.h sodium/crypto_generichash.h sodium/crypto_generichash_blake2b.h sodium/crypto_hash.h sodium/crypto_hash_sha256.h sodium/crypto_hash_sha512.h sodium/crypto_kdf.h sodium/crypto_kdf_hkdf_sha256.h sodium/crypto_kdf_hkdf_sha512.h sodium/crypto_kdf_blake2b.h sodium/crypto_kx.h sodium/crypto_onetimeauth.h sodium/crypto_onetimeauth_poly1305.h sodium/crypto_pwhash.h sodium/crypto_pwhash_argon2i.h sodium/crypto_pwhash_argon2id.h sodium/crypto_pwhash_scryptsalsa208sha256.h sodium/crypto_scalarmult.h sodium/crypto_scalarmult_curve25519.h sodium/crypto_scalarmult_ed25519.h sodium/crypto_scalarmult_ristretto255.h '/usr/local/include/sodium' /bin/mkdir -p '/usr/local/include/sodium' /bin/install -c -m 644 sodium/crypto_secretbox.h sodium/crypto_secretbox_xchacha20poly1305.h sodium/crypto_secretbox_xsalsa20poly1305.h sodium/crypto_secretstream_xchacha20poly1305.h sodium/crypto_shorthash.h sodium/crypto_shorthash_siphash24.h sodium/crypto_sign.h sodium/crypto_sign_ed25519.h sodium/crypto_sign_edwards25519sha512batch.h sodium/crypto_stream.h sodium/crypto_stream_chacha20.h sodium/crypto_stream_salsa20.h sodium/crypto_stream_salsa2012.h sodium/crypto_stream_salsa208.h sodium/crypto_stream_xchacha20.h sodium/crypto_stream_xsalsa20.h sodium/crypto_verify_16.h sodium/crypto_verify_32.h sodium/crypto_verify_64.h sodium/export.h sodium/randombytes.h sodium/randombytes_internal_random.h sodium/randombytes_sysrandom.h sodium/runtime.h sodium/utils.h '/usr/local/include/sodium' /bin/install -c -m 644 sodium.h '/usr/local/include/.' /bin/mkdir -p '/usr/local/include' /bin/mkdir -p '/usr/local/include/sodium' /bin/install -c -m 644 sodium/version.h '/usr/local/include/sodium' make[4]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium/include' make[3]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[4]: Entering directory '/svr-setup/libsodium-1.0.20/src/libsodium' /bin/mkdir -p '/usr/local/lib64' /bin/sh ../../libtool --mode=install /bin/install -c libsodium.la '/usr/local/lib64' libtool: install: /bin/install -c .libs/libsodium.so.26.2.0 /usr/local/lib64/libsodium.so.26.2.0 libtool: install: (cd /usr/local/lib64 && { ln -s -f libsodium.so.26.2.0 libsodium.so.26 || { rm -f libsodium.so.26 && ln -s libsodium.so.26.2.0 libsodium.so.26; }; }) libtool: install: (cd /usr/local/lib64 && { ln -s -f libsodium.so.26.2.0 libsodium.so || { rm -f libsodium.so && ln -s libsodium.so.26.2.0 libsodium.so; }; }) libtool: install: /bin/install -c .libs/libsodium.lai /usr/local/lib64/libsodium.la libtool: install: /bin/install -c .libs/libsodium.a /usr/local/lib64/libsodium.a libtool: install: chmod 644 /usr/local/lib64/libsodium.a libtool: install: ranlib /usr/local/lib64/libsodium.a libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib64 ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib64 If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/src/libsodium' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/src' make[3]: Entering directory '/svr-setup/libsodium-1.0.20/src' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/src' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/src' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/src' Making install in test make[1]: Entering directory '/svr-setup/libsodium-1.0.20/test' Making install in default make[2]: Entering directory '/svr-setup/libsodium-1.0.20/test/default' make[3]: Entering directory '/svr-setup/libsodium-1.0.20/test/default' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/test/default' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/test/default' make[2]: Entering directory '/svr-setup/libsodium-1.0.20/test' make[3]: Entering directory '/svr-setup/libsodium-1.0.20/test' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/svr-setup/libsodium-1.0.20/test' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20/test' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20/test' make[1]: Entering directory '/svr-setup/libsodium-1.0.20' make[2]: Entering directory '/svr-setup/libsodium-1.0.20' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/lib64/pkgconfig' /bin/install -c -m 644 libsodium.pc '/usr/local/lib64/pkgconfig' make[2]: Leaving directory '/svr-setup/libsodium-1.0.20' make[1]: Leaving directory '/svr-setup/libsodium-1.0.20' /svr-setup/php-8.3.26/fpm-build /svr-setup /svr-setup/php-8.3.26/fpm-build wget https://github.com/P-H-C/phc-winner-argon2/archive/refs/tags/20190702.tar.gz --tries=3 --2025-10-05 18:05:56-- https://github.com/P-H-C/phc-winner-argon2/archive/refs/tags/20190702.tar.gz Resolving github.com (github.com)... 140.82.114.3 Connecting to github.com (github.com)|140.82.114.3|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/P-H-C/phc-winner-argon2/tar.gz/refs/tags/20190702 [following] --2025-10-05 18:05:56-- https://codeload.github.com/P-H-C/phc-winner-argon2/tar.gz/refs/tags/20190702 Resolving codeload.github.com (codeload.github.com)... 140.82.114.10 Connecting to codeload.github.com (codeload.github.com)|140.82.114.10|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/x-gzip] Saving to: ‘20190702.tar.gz’ 0K .......... .......... .......... .......... .......... 40.6M 50K .......... .......... .......... .......... .......... 65.1M 100K .......... .......... .......... .......... .......... 107M 150K .......... .......... .......... .......... .......... 202M 200K .......... .......... .......... .......... .......... 212M 250K .......... .......... .......... .......... .......... 4.58M 300K .......... .......... .......... .......... .......... 217M 350K .......... .......... .......... .......... .......... 231M 400K .......... .......... .......... .......... .......... 243M 450K .......... .......... .......... .......... .......... 229M 500K .......... .......... .......... .......... .......... 1.49M 550K .......... .......... .......... .......... .......... 89.8M 600K .......... .......... .......... .......... .......... 99.9M 650K .......... .......... .......... .......... .......... 106M 700K .......... .......... .......... .......... .......... 98.8M 750K .......... .......... .......... .......... .......... 1.57M 800K .......... .......... .......... .......... .......... 97.2M 850K .......... .......... .......... .......... .......... 100M 900K .......... .......... .......... .......... .......... 111M 950K .......... .......... .......... .......... .......... 222M 1000K .......... .......... .......... .......... .......... 1.55M 1050K .......... .......... .......... .......... .......... 103M 1100K .......... .......... .......... .......... .......... 101M 1150K .......... .......... .......... .......... .......... 82.5M 1200K .......... .......... .......... .......... .......... 75.6M 1250K .......... .......... .......... .......... .......... 2.89M 1300K .......... .......... .......... .......... .......... 55.3M 1350K .......... .......... .......... .......... .......... 93.9M 1400K .......... .......... .......... .......... .......... 91.6M 1450K .......... .......... 90.8M=0.1s 2025-10-05 18:05:56 (10.7 MB/s) - ‘20190702.tar.gz’ saved [1505307] Download done. (BBuilding with optimizations for native rm -f 'argon2' 'bench' 'genkat' rm -f 'libargon2.so.1' 'libargon2.a' kat-argon2* 'libargon2.pc' rm -f testcase rm -rf *.dSYM cd src/ && rm -f *.o cd src/blake2/ && rm -f *.o cd kats/ && rm -f kat-* diff* run_* make_* Building with optimizations for native gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native src/argon2.c src/core.c src/blake2/blake2b.c src/thread.c src/encoding.c src/opt.c src/run.c -o argon2 gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -shared -fPIC -fvisibility=hidden -DA2_VISCTL=1 -Wl,-soname,libargon2.so.1 src/argon2.c src/core.c src/blake2/blake2b.c src/thread.c src/encoding.c src/opt.c -o libargon2.so.1 gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/argon2.o src/argon2.c gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/core.o src/core.c gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/blake2/blake2b.o src/blake2/blake2b.c gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/thread.o src/thread.c gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/encoding.o src/encoding.c gcc -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -std=c89 -O3 -Wall -g -Iinclude -Isrc -pthread -march=native -c -o src/opt.o src/opt.c sed '/^##.*$/d; s#@PREFIX@#/usr#g; s#@EXTRA_LIBS@#-lrt -ldl#g; s#@UPSTREAM_VER@#ZERO#g; s#@HOST_MULTIARCH@#lib/x86_64-linux-gnu#g; s#@INCLUDE@#include#g;' < 'libargon2.pc.in' > 'libargon2.pc' ar rcs libargon2.a src/argon2.o src/core.o src/blake2/blake2b.o src/thread.o src/encoding.o src/opt.o Building with optimizations for native install -d /usr/local/include install -m 0644 include/argon2.h /usr/local/include install -d /usr/local/lib64 install -m 0644 libargon2.so.1 libargon2.a /usr/local/lib64 cd /usr/local/lib64 && ln -s libargon2.so.1 libargon2.so install -d /usr/local/bin install argon2 /usr/local/bin install -d /usr/local/lib64/pkgconfig install -m 0644 libargon2.pc /usr/local/lib64/pkgconfig /svr-setup/php-8.3.26/fpm-build disable libzip, libsodium or libargon2 libraries set PNG_CFLAGS and PNG_LIBS export PNG_CFLAGS='-I/usr/include' export PNG_LIBS='-L/usr/lib64 -lpng16' lrwxrwxrwx. 1 root root 21 Oct 29 2024 pnglibconf.h -> libpng16/pnglibconf.h lrwxrwxrwx. 1 root root 14 Oct 29 2024 png.h -> libpng16/png.h lrwxrwxrwx. 1 root root 18 Oct 29 2024 pngconf.h -> libpng16/pngconf.h drwxr-xr-x. 2 root root 4.0K Oct 5 18:02 libpng16 lrwxrwxrwx. 1 root root 11 Oct 29 2024 libpng.so -> libpng16.so -rwxr-xr-x. 1 root root 232K Oct 29 2024 libpng16.so.16.40.0 lrwxrwxrwx. 1 root root 19 Oct 29 2024 libpng16.so.16 -> libpng16.so.16.40.0 lrwxrwxrwx. 1 root root 19 Oct 29 2024 libpng16.so -> libpng16.so.16.40.0 --------------------------- PGO binary labelling --------------------------- remove PGO label to php-cgi binary version remove PGO label to php cli binary version remove PGO label to php-fpm binary version Using GCC 14 export CFLAGS="-O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -fstack-protector-strong -fPIC" export CPPFLAGS=" -D_FORTIFY_SOURCE=2" export ICU_CFLAGS='-fPIC' export LIBSODIUM_CFLAGS='-fPIC' export LIBZIP_CFLAGS="-I/usr/local/include -fPIC" export PHP_LDFLAGS=" -Wl,-z,relro,-z,now -pie" Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:39 ago on Sun 05 Oct 2025 06:05:20 PM UTC. No match for argument: checksec Error: Unable to find a match: checksec /svr-setup /svr-setup/php-8.3.26/fpm-build cp: cannot stat '/svr-setup/checksec.sh-2.6.0/checksec': No such file or directory /svr-setup/php-8.3.26/fpm-build 3 ../configure --enable-fpm --enable-opcache --enable-intl --enable-pcntl --with-snmp --enable-embed=shared --with-mhash --with-zlib --with-gettext --enable-exif --with-zip --with-bz2 --enable-soap --enable-sockets --enable-sysvmsg --enable-sysvsem --enable-sysvshm --enable-shmop --with-pear --enable-mbstring --with-openssl --with-mysql=mysqlnd --with-libdir=lib64 --with-mysqli=mysqlnd --with-mysql-sock=/var/lib/mysql/mysql.sock --with-curl --enable-gd --with-external-gd --with-xmlrpc --enable-bcmath --enable-calendar --enable-ftp --enable-gd-native-ttf --with-freetype --with-jpeg --with-png-dir=/usr --with-xpm --with-webp --with-t1lib=/usr --enable-shmop --with-pear --enable-mbstring --with-openssl --with-mysql=mysqlnd --with-libdir=lib64 --with-mysqli=mysqlnd --enable-pdo --with-pdo-sqlite --with-pdo-mysql=mysqlnd --enable-inline-optimization --with-imap --with-imap-ssl --with-kerberos --with-readline --with-libedit --with-gmp --with-pspell --with-tidy --with-enchant --with-fpm-user=nginx --with-fpm-group=nginx --disable-fileinfo --with-ldap --with-ldap-sasl --with-pic --with-config-file-scan-dir=/etc/centminmod/php.d --with-xsl configure: WARNING: unrecognized options: --with-mysql, --with-xmlrpc, --enable-gd-native-ttf, --with-png-dir, --with-t1lib, --with-mysql, --enable-inline-optimization checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for pkg-config... /bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking how to run the C preprocessor... gcc -E checking for icc... no checking for suncc... no checking how to run the C preprocessor... gcc -E checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking whether ln -s works... yes checking for system library directory... lib64 checking whether to enable runpaths... yes checking if compiler supports -Wl,-rpath,... yes checking for gawk... gawk checking for bison... bison checking for bison version... 3.8.2 (ok) checking for re2c... no checking for php... no checking whether to enable computed goto gcc extension with re2c... no checking whether C compiler accepts -ffp-contract=off... yes checking whether C compiler accepts -fvisibility=hidden... yes checking whether to force non-PIC code in shared modules... no checking whether we are using musl libc... no checking whether to use -D_GNU_SOURCE cflag... yes checking for global register variables support... yes checking whether __cpuid_count is available... yes checking for pthreads_cflags... -pthread checking for pthreads_lib... pthread Configuring SAPI modules checking for Apache 2 handler module support via DSO through APXS... no checking for setproctitle... no checking for sys/pstat.h... no checking for PS_STRINGS... no checking for CLI build... yes checking for embedded SAPI library support... shared checking for FPM build... yes checking for clearenv... yes checking for setproctitle... (cached) no checking for setproctitle_fast... no checking for library containing socket... none required checking for library containing inet_addr... none required checking for setpflags... no checking for clock_gettime... yes checking for ptrace... yes checking whether ptrace works... yes checking for proc mem file... mem checking if gcc supports __sync_bool_compare_and_swap... yes checking for TCP_INFO... yes checking for TCP_CONNECTION_INFO... no checking for sysconf... yes checking for times... yes checking for kqueue... no checking for port framework... no checking for /dev/poll... no checking for epoll... yes checking for select... yes checking for clang fuzzer SAPI... no checking for LiteSpeed support... no checking for phpdbg support... yes checking for phpdbg debug build... no checking for phpdbg readline support... no checking whether termios.h defines TIOCGWINSZ... no checking whether sys/ioctl.h defines TIOCGWINSZ... yes checking for phpdbg and readline integration... disabled checking for userfaultfd faulting on write-protected memory support... yes checking for pthreads_cflags... (cached) -pthread checking for pthreads_lib... (cached) pthread checking working pthreads... -pthread -lpthread checking for CGI build... yes checking for sun_len in sys/un.h... no checking whether cross-process locking is required by accept()... no checking for chosen SAPI module... embed checking for executable SAPI binaries... cli fpm phpdbg cgi Running system checks checking for sendmail... /sbin/sendmail checking whether system uses EBCDIC... no checking whether byte ordering is bigendian... no checking whether writing to stdout works... This is the test message -- yes checking for socket... yes checking for socketpair... yes checking for htonl... yes checking for gethostname... yes checking for gethostbyaddr... yes checking for dlopen... yes checking for dlsym... yes checking for sin in -lm... yes checking for inet_aton... yes checking for stdint.h... (cached) yes checking for dirent.h... yes checking for sys/param.h... yes checking for sys/types.h... (cached) yes checking for sys/time.h... yes checking for netinet/in.h... yes checking for alloca.h... yes checking for arpa/inet.h... yes checking for arpa/nameser.h... yes checking for crypt.h... yes checking for dns.h... no checking for fcntl.h... yes checking for grp.h... yes checking for ieeefp.h... no checking for langinfo.h... yes checking for linux/filter.h... yes checking for linux/sock_diag.h... yes checking for malloc.h... yes checking for os/signpost.h... no checking for poll.h... yes checking for pty.h... yes checking for pwd.h... yes checking for resolv.h... yes checking for strings.h... (cached) yes checking for syslog.h... yes checking for sysexits.h... yes checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/mman.h... yes checking for sys/mount.h... yes checking for sys/poll.h... yes checking for sys/procctl.h... no checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/socket.h... yes checking for sys/stat.h... (cached) yes checking for sys/statfs.h... yes checking for sys/statvfs.h... yes checking for sys/vfs.h... yes checking for sys/sysexits.h... no checking for sys/uio.h... yes checking for sys/wait.h... yes checking for sys/loadavg.h... no checking for unistd.h... (cached) yes checking for unix.h... no checking for utime.h... yes checking for sys/utsname.h... yes checking for sys/ipc.h... yes checking for dlfcn.h... yes checking for tmmintrin.h... yes checking for nmmintrin.h... yes checking for wmmintrin.h... yes checking for immintrin.h... yes checking for fopencookie... yes checking for broken getcwd... no checking for broken gcc optimize-strlen... no checking whether struct tm is in sys/time.h or time.h... time.h checking for gcc options needed to detect all undeclared functions... none needed checking for struct tm.tm_zone... yes checking whether localtime_r is declared... yes checking whether gmtime_r is declared... yes checking whether asctime_r is declared... yes checking whether ctime_r is declared... yes checking whether strtok_r is declared... yes checking for fclose declaration... ok checking for struct flock... yes checking for socklen_t... yes checking size of intmax_t... 8 checking size of ssize_t... 8 checking size of ptrdiff_t... 8 checking size of short... 2 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of size_t... 8 checking size of off_t... 8 checking for __builtin_expect... yes checking for __builtin_clz... yes checking for __builtin_clzl... yes checking for __builtin_clzll... yes checking for __builtin_ctzl... yes checking for __builtin_ctzll... yes checking for __builtin_smull_overflow... yes checking for __builtin_smulll_overflow... yes checking for __builtin_saddl_overflow... yes checking for __builtin_saddll_overflow... yes checking for __builtin_usub_overflow... yes checking for __builtin_ssubl_overflow... yes checking for __builtin_ssubll_overflow... yes checking for __builtin_cpu_init... yes checking for __builtin_cpu_supports... yes checking for __builtin_frame_address... yes checking for prctl... yes checking for procctl... no checking for avx512 supports in compiler... yes checking for avx512 vbmi supports in compiler... yes checking whether the compiler supports __alignof__... yes checking for struct tm.tm_gmtoff... yes checking for struct stat.st_blksize... yes checking for struct stat.st_rdev... yes checking for struct stat.st_blocks... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking for struct sockaddr_storage... yes checking for field sa_len in struct sockaddr... no checking for __attribute__((ifunc))... yes checking for __attribute__((target))... yes checking for IPv6 support... yes checking for alphasort... yes checking for asctime_r... yes checking for chroot... yes checking for ctime_r... yes checking for explicit_memset... no checking for fdatasync... yes checking for flock... yes checking for ftok... yes checking for funopen... no checking for gai_strerror... yes checking for getcwd... yes checking for getloadavg... yes checking for getlogin... yes checking for getprotobyname... yes checking for getprotobynumber... yes checking for getservbyname... yes checking for getservbyport... yes checking for getrusage... yes checking for gettimeofday... yes checking for gmtime_r... yes checking for getpwnam_r... yes checking for getgrnam_r... yes checking for getpwuid_r... yes checking for getwd... yes checking for glob... yes checking for inet_ntoa... yes checking for inet_ntop... yes checking for inet_pton... yes checking for localtime_r... yes checking for lchown... yes checking for memcntl... no checking for memmove... yes checking for mkstemp... yes checking for mmap... yes checking for nice... yes checking for nl_langinfo... yes checking for poll... yes checking for pthread_jit_write_protect_np... no checking for putenv... yes checking for scandir... yes checking for setitimer... yes checking for setenv... yes checking for shutdown... yes checking for sigprocmask... yes checking for statfs... yes checking for statvfs... yes checking for std_syslog... no checking for strcasecmp... yes checking for strnlen... yes checking for strptime... yes checking for strtok_r... yes checking for symlink... yes checking for tzset... yes checking for unsetenv... yes checking for usleep... yes checking for utime... yes checking for vasprintf... yes checking for asprintf... yes checking for nanosleep... yes checking for memmem... yes checking for memrchr... yes checking whether strerror_r is declared... yes checking whether strerror_r returns char *... yes checking how many arguments gethostbyname_r() takes... six checking for nanosleep in -lrt... yes checking for setsockopt in -lnetwork... no checking for __setsockopt in -lnetwork... no checking for getaddrinfo... yes checking for copy_file_range... yes checking for strlcat... yes checking for strlcpy... yes checking for explicit_bzero... yes checking for getopt... yes checking for working alloca.h... yes checking for alloca... yes checking for type of reentrant time-related functions... POSIX checking for in_addr_t... yes checking for aarch64 CRC32 API... no checking for asm goto... yes checking whether to enable valgrind support... no checking for openpty... yes General settings checking whether to include gcov symbols... no checking whether to include debugging symbols... no checking whether to enable debug assertions in release mode... no checking whether to dlopen extensions with RTLD_NOW instead of RTLD_LAZY... no checking layout of installed files... PHP checking path to configuration file... DEFAULT checking where to scan for configuration files... /etc/centminmod/php.d checking whether to enable PHP's own SIGCHLD handler... no checking whether to explicitly link against libgcc... no checking whether to enable short tags by default... yes checking whether to enable dmalloc... no checking whether to enable IPv6 support... yes checking whether to enable DTrace support... no checking how big to make fd sets... using system default Configuring extensions checking for io.h... no checking for strtoll... yes checking for atoll... yes checking whether C compiler accepts -Wno-implicit-fallthrough... yes checking whether to build with LIBXML support... yes checking for libxml-2.0 >= 2.9.0... yes checking for OpenSSL support... yes checking for Kerberos support... yes checking whether to use system default cipher list instead of hardcoded value... no checking for krb5-gssapi krb5... no configure: error: Package requirements (krb5-gssapi krb5) were not met: Package 'krb5-gssapi', required by 'virtual:world', not found Package 'krb5', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables KERBEROS_CFLAGS and KERBEROS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. sed: can't read Makefile: No such file or directory sed: can't read Makefile: No such file or directory php_configure.inc make -j2 PHP_PGO = n make -j2 make: *** No targets specified and no makefile found. Stop. real 0m0.003s user 0m0.001s sys 0m0.002s php_configure.inc make install make: *** No rule to make target 'install'. Stop. real 0m0.003s user 0m0.000s sys 0m0.003s strip PHP binary... ls: cannot access '/usr/local/bin/php': No such file or directory ls: cannot access '/usr/local/bin/php-cgi': No such file or directory ls: cannot access '/usr/local/sbin/php-fpm': No such file or directory backup before strip PHP binary... cp: cannot stat '/usr/local/bin/php': No such file or directory cp: cannot stat '/usr/local/bin/php-cgi': No such file or directory cp: cannot stat '/usr/local/sbin/php-fpm': No such file or directory strip: '/usr/local/bin/php': No such file strip: '/usr/local/bin/php-cgi': No such file strip: '/usr/local/sbin/php-fpm': No such file after strip PHP binary... ls: cannot access '/usr/local/bin/php': No such file or directory ls: cannot access '/usr/local/bin/php-cgi': No such file or directory ls: cannot access '/usr/local/sbin/php-fpm': No such file or directory ---------------------------------------------------------------------------------- (BPHP was not installed properly ---------------------------------------------------------------------------------- (B Copying php-fpm.conf /usr/local/etc/php-fpm.conf cp: cannot create regular file '/etc/init.d/php-fpm': No such file or directory chmod: cannot access '/etc/init.d/php-fpm': No such file or directory ./centmin.sh: line 3165: chkconfig: command not found Redirecting to /bin/systemctl start php-fpm.service Failed to start php-fpm.service: Unit php-fpm.service not found. exclude line exists... adding nginx* php* exclusions (B---------------------------------------------- Creating /etc/logrotate.d/php-fpm file ---------------------------------------------- ...... ---------------------------------------------------------------------------- /var/log/php-fpm/*.log { daily dateext missingok rotate 10 compress delaycompress notifempty postrotate /bin/kill -SIGUSR1 $(cat /var/run/php-fpm/php-fpm.pid 2>/dev/null) 2>/dev/null || true endscript } --------------------------------------------------------------------------- Current php-fpm log directories: --------------------------------------------------------------------------- ls -lh /var/log/php-fpm/ total 0 -rw-rw-rw-. 1 root root 0 Oct 5 18:06 www-error.log -rw-rw-rw-. 1 root root 0 Oct 5 18:06 www-php.error.log -rw-rw-rw-. 1 root root 0 Oct 5 18:06 www-slow.log --------------------------------------------------------------------------- ---------------------------------------------------------------------------- php-fpm logrotation /etc/logrotate.d/php-fpm setup completed ---------------------------------------------------------------------------- /usr/local/src/centminmod/inc/php_configure.inc: line 320: php-config: command not found Stripping PHP Extensions in before stripping total 3.2M drwxrwxr-x. 5 root root 12K Sep 23 17:57 Zend drwxrwxr-x. 3 root root 4.0K Sep 23 17:57 win32 -rw-rw-r--. 1 root root 7.6K Sep 23 17:57 UPGRADING.INTERNALS -rw-rw-r--. 1 root root 29K Sep 23 17:57 UPGRADING drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 TSRM -rw-rw-r--. 1 root root 2.0K Sep 23 17:57 .travis.yml drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 travis drwxrwxr-x. 10 root root 4.0K Sep 23 17:57 tests -rw-rw-r--. 1 root root 618 Sep 23 17:57 SECURITY.md drwxrwxr-x. 4 root root 4.0K Sep 23 17:57 scripts drwxrwxr-x. 10 root root 4.0K Sep 23 17:57 sapi -rwxrwxr-x. 1 root root 141K Sep 23 17:57 run-tests.php -rwxrwxr-x. 1 root root 3.3K Sep 23 17:57 run-extra-tests.php -rw-rw-r--. 1 root root 30K Sep 23 17:57 README.REDIST.BINS -rw-rw-r--. 1 root root 4.8K Sep 23 17:57 README.md -rw-rw-r--. 1 root root 72K Sep 23 17:57 php.ini-production -rw-rw-r--. 1 root root 72K Sep 23 17:57 php.ini-development drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 pear -rw-rw-r--. 1 root root 83K Sep 23 17:57 NEWS -rw-rw-r--. 1 root root 3.2K Sep 23 17:57 LICENSE -rw-rw-r--. 1 root root 9.1K Sep 23 17:57 .gitignore drwxrwxr-x. 6 root root 4.0K Sep 23 17:57 .github -rw-rw-r--. 1 root root 1.1K Sep 23 17:57 .gitattributes -rw-rw-r--. 1 root root 14K Sep 23 17:57 .gdbinit -rw-rw-r--. 1 root root 25K Sep 23 17:57 EXTENSIONS drwxrwxr-x. 75 root root 4.0K Sep 23 17:57 ext -rw-rw-r--. 1 root root 738 Sep 23 17:57 .editorconfig drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 docs -rw-rw-r--. 1 root root 22K Sep 23 17:57 CONTRIBUTING.md -rw-rw-r--. 1 root root 52K Sep 23 17:57 configure.ac -rw-rw-r--. 1 root root 12K Sep 23 17:57 CODING_STANDARDS.md drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 .circleci -rw-rw-r--. 1 root root 346 Sep 23 17:57 buildconf.bat -rwxrwxr-x. 1 root root 4.0K Sep 23 17:57 buildconf drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 build drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 benchmark drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 appveyor -rwxr-xr-x. 1 root root 2.5M Oct 5 18:05 configure drwxr-xr-x. 2 root root 4.0K Oct 5 18:05 autom4te.cache drwxrwxr-x. 3 root root 4.0K Oct 5 18:05 main drwxr-xr-x. 5 root root 4.0K Oct 5 18:06 fpm-build after stripping total 3.2M drwxrwxr-x. 5 root root 12K Sep 23 17:57 Zend drwxrwxr-x. 3 root root 4.0K Sep 23 17:57 win32 -rw-rw-r--. 1 root root 7.6K Sep 23 17:57 UPGRADING.INTERNALS -rw-rw-r--. 1 root root 29K Sep 23 17:57 UPGRADING drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 TSRM -rw-rw-r--. 1 root root 2.0K Sep 23 17:57 .travis.yml drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 travis drwxrwxr-x. 10 root root 4.0K Sep 23 17:57 tests -rw-rw-r--. 1 root root 618 Sep 23 17:57 SECURITY.md drwxrwxr-x. 4 root root 4.0K Sep 23 17:57 scripts drwxrwxr-x. 10 root root 4.0K Sep 23 17:57 sapi -rwxrwxr-x. 1 root root 141K Sep 23 17:57 run-tests.php -rwxrwxr-x. 1 root root 3.3K Sep 23 17:57 run-extra-tests.php -rw-rw-r--. 1 root root 30K Sep 23 17:57 README.REDIST.BINS -rw-rw-r--. 1 root root 4.8K Sep 23 17:57 README.md -rw-rw-r--. 1 root root 72K Sep 23 17:57 php.ini-production -rw-rw-r--. 1 root root 72K Sep 23 17:57 php.ini-development drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 pear -rw-rw-r--. 1 root root 83K Sep 23 17:57 NEWS -rw-rw-r--. 1 root root 3.2K Sep 23 17:57 LICENSE -rw-rw-r--. 1 root root 9.1K Sep 23 17:57 .gitignore drwxrwxr-x. 6 root root 4.0K Sep 23 17:57 .github -rw-rw-r--. 1 root root 1.1K Sep 23 17:57 .gitattributes -rw-rw-r--. 1 root root 14K Sep 23 17:57 .gdbinit -rw-rw-r--. 1 root root 25K Sep 23 17:57 EXTENSIONS drwxrwxr-x. 75 root root 4.0K Sep 23 17:57 ext -rw-rw-r--. 1 root root 738 Sep 23 17:57 .editorconfig drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 docs -rw-rw-r--. 1 root root 22K Sep 23 17:57 CONTRIBUTING.md -rw-rw-r--. 1 root root 52K Sep 23 17:57 configure.ac -rw-rw-r--. 1 root root 12K Sep 23 17:57 CODING_STANDARDS.md drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 .circleci -rw-rw-r--. 1 root root 346 Sep 23 17:57 buildconf.bat -rwxrwxr-x. 1 root root 4.0K Sep 23 17:57 buildconf drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 build drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 benchmark drwxrwxr-x. 2 root root 4.0K Sep 23 17:57 appveyor -rwxr-xr-x. 1 root root 2.5M Oct 5 18:05 configure drwxr-xr-x. 2 root root 4.0K Oct 5 18:05 autom4te.cache drwxrwxr-x. 3 root root 4.0K Oct 5 18:05 main drwxr-xr-x. 5 root root 4.0K Oct 5 18:06 fpm-build *************************************************** Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:50 ago on Sun 05 Oct 2025 06:05:20 PM UTC. No match for argument: checksec Error: Unable to find a match: checksec /usr/local/src/centminmod/inc/php_configure.inc: line 337: php-config: command not found *************************************************** checksec --format=json --file=/usr/local/sbin/php-fpm --extended 2>/dev/null | jq -r lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 40 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Vendor ID: AuthenticAMD BIOS Vendor ID: QEMU Model name: AMD EPYC-Milan Processor BIOS Model name: NotSpecified CPU @ 2.0GHz BIOS CPU family: 1 CPU family: 25 Model: 1 Thread(s) per core: 2 Core(s) per socket: 1 Socket(s): 1 Stepping: 1 BogoMIPS: 4393.39 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm rep_good nopl xtopology cpuid extd_apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw topoext perfctr_core ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzero xsaveerptr wbnoinvd arat umip pku ospke rdpid fsrm Hypervisor vendor: KVM Virtualization type: full L1d cache: 32 KiB (1 instance) L1i cache: 32 KiB (1 instance) L2 cache: 512 KiB (1 instance) L3 cache: 32 MiB (1 instance) NUMA node(s): 1 NUMA node0 CPU(s): 0,1 Vulnerability Gather data sampling: Not affected Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Reg file data sampling: Not affected Vulnerability Retbleed: Not affected Vulnerability Spec rstack overflow: Vulnerable: Safe RET, no microcode Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines; IBPB conditional; IBRS_FW; STIBP conditional; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected CFLAGS=-O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -fstack-protector-strong -fPIC CXXFLAGS=-O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations GCC_NONNATIVEFLAGS= -mavx -mavx2 -mpclmul -msse4 -msse4.1 -msse4.2 -msse4a ************************************************* * PHP installed (B************************************************* -rw-r--r--. 1 root root 57 Oct 5 18:06 /root/centminlogs/centminmod_phpinstalltime_051025-180412.log cat: /usr/local/bin/php-config: No such file or directory grep: /etc/centminmod/php.d/zendopcache.ini: No such file or directory Copying zendopcache.ini > /etc/centminmod/php.d/zendopcache.ini ************************************************* * Zend Optimizer Plus OPcache installed (B************************************************* setup initial /usr/local/nginx/html/opcache.php cp /usr/local/src/centminmod/config/zendopcache/opcache.php /usr/local/nginx/html/deab016e5925bed6_opcache.php Creating htpasswd_opcache user/pass... (B/usr/local/nginx/conf/htpasswd.sh create /usr/local/nginx/conf/htpasswd_opcache opadminPmvtFRULyyDf9pY zx0WYuf6IX3kgkbfa6wbCgcS5bJZuX8 /usr/local/nginx/conf/htpasswd_opcache contents: opadminPmvtFRULyyDf9pY:$apr1$tLvn6hnj$ttdgLeQxJcc8GoYENkFtG0 Insert Username/Password into /usr/local/nginx/html/deab016e5925bed6_opcache.php file itself (B Create include file /usr/local/nginx/conf/include_opcache.conf (B location ~ ^/(deab016e5925bed6_opcache.php) { include /usr/local/nginx/conf/php.conf; auth_basic "Password Protected"; auth_basic_user_file /usr/local/nginx/conf/htpasswd_opcache; } Setup virtual.conf (BAdding /usr/local/nginx/conf/include_opcache.conf include entry (B service nginx reload Redirecting to /bin/systemctl reload nginx.service nginx.service is not active, cannot reload. /usr/local/src/centminmod/inc/igbinary.inc: line 9: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 grep: warning: stray \ before / Cloning into 'igbinary-php'... compiling igbinary PHP extension for PHP 7.x ... autoconf (GNU Autoconf) 2.71 /usr/local/src/centminmod/inc/igbinary.inc: line 59: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/igbinary.inc: line 60: /usr/local/bin/phpize: No such file or directory /svr-setup/igbinary-php /usr/local/src/centminmod/inc/igbinary.inc: line 62: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. service php-fpm reload Redirecting to /bin/systemctl reload php-fpm.service Failed to reload php-fpm.service: Unit php-fpm.service not found. Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:00:51 ago on Sun 05 Oct 2025 06:05:20 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: s-nail x86_64 14.9.24-12.el10 appstream 639 k Transaction Summary ================================================================================ Install 1 Package Total download size: 639 k Installed size: 1.2 M Downloading Packages: s-nail-14.9.24-12.el10.x86_64.rpm 101 MB/s | 639 kB 00:00 -------------------------------------------------------------------------------- Total 28 MB/s | 639 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Running scriptlet: s-nail-14.9.24-12.el10.x86_64 1/1 Installing : s-nail-14.9.24-12.el10.x86_64 1/1 Running scriptlet: s-nail-14.9.24-12.el10.x86_64 1/1 Installed: s-nail-14.9.24-12.el10.x86_64 Complete! real 0m0.917s user 0m0.674s sys 0m0.192s incmemcachedinstall /usr/local/src/centminmod/inc/gcc.inc: line 5: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 cat: /usr/local/bin/php-config: No such file or directory ************************************************* * Installing memcached (B************************************************* Update memcached server setup Adding memcached user/group with UID 957 and GID 957, and adding to nginx group useradd warning: memcached's uid 957 outside of the UID_MIN 1000 and UID_MAX 60000 range. uid=957(memcached) gid=957(memcached) groups=957(memcached),1068(nginx) Downloading memcached... Check if mcperf-0.1.1.tar.gz exists (BDownloading mcperf tarball.. (BDownload twemperf-0.1.1.tar.gz ... (Btwemperf-0.1.1.tar.gz found, skipping download... (Btwemperf-0.1.1.tar.gz valid file. (B Check if memcached-1.6.36.tar.gz exists (BCheck if release-2.1.12-stable.tar.gz exists (BCheck if memcached-2.2.0.tgz exists (Bx86_64 lib64 autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: configure.ac: creating directory build-aux autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: aclocal --force -I m4 autoreconf: running: /usr/bin/autoconf --force configure.ac:351: warning: The macro `AC_HAVE_LIBRARY' is obsolete. configure.ac:351: You should run autoupdate. ./lib/autoconf/libs.m4:138: AC_HAVE_LIBRARY is expanded from... configure.ac:351: the top level configure.ac:357: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:357: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:357: the top level configure.ac:805: warning: The macro `AC_LANG_C' is obsolete. configure.ac:805: You should run autoupdate. ./lib/autoconf/c.m4:72: AC_LANG_C is expanded from... m4/acx_pthread.m4:86: ACX_PTHREAD is expanded from... configure.ac:805: the top level configure.ac:805: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:805: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... m4/acx_pthread.m4:86: ACX_PTHREAD is expanded from... configure.ac:805: the top level configure.ac:1007: warning: AC_OUTPUT should be used without arguments. configure.ac:1007: You should run autoupdate. autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:24: installing 'build-aux/compile' configure.ac:26: installing 'build-aux/config.guess' configure.ac:26: installing 'build-aux/config.sub' configure.ac:14: installing 'build-aux/install-sh' configure.ac:14: installing 'build-aux/missing' Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' autoreconf: Leaving directory '.' checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking for sys/time.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking whether ln -s works... yes checking for a sed that does not truncate output... /bin/sed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether gcc needs -traditional... no checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B checking the name lister (/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for library containing inet_ntoa... none required checking for library containing socket... none required checking for library containing inet_aton... none required checking for library containing clock_gettime... none required checking for clock_gettime... yes checking for library containing sendfile... none required checking for WIN32... no checking for MIDIPIX... no checking for CYGWIN... no checking for zlib.h... yes checking for library containing inflateEnd... -lz checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for pkg-config... /bin/pkg-config checking if pkg-config is at least version 0.15.0... yes checking for openssl/ssl.h... yes checking for arpa/inet.h... yes checking for fcntl.h... yes checking for ifaddrs.h... yes checking for mach/mach_time.h... no checking for mach/mach.h... no checking for netdb.h... yes checking for netinet/in.h... yes checking for netinet/in6.h... no checking for netinet/tcp.h... yes checking for sys/un.h... yes checking for poll.h... yes checking for port.h... no checking for stdarg.h... yes checking for stddef.h... yes checking for sys/devpoll.h... no checking for sys/epoll.h... yes checking for sys/event.h... no checking for sys/eventfd.h... yes checking for sys/ioctl.h... yes checking for sys/mman.h... yes checking for sys/param.h... yes checking for sys/queue.h... yes checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/sendfile.h... yes checking for sys/socket.h... yes checking for sys/stat.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/timerfd.h... yes checking for sys/uio.h... yes checking for sys/wait.h... yes checking for sys/random.h... yes checking for errno.h... yes checking for afunix.h... no checking for TAILQ_FOREACH in sys/queue.h... yes checking for timeradd in sys/time.h... yes checking for timercmp in sys/time.h... yes checking for timerclear in sys/time.h... yes checking for timerisset in sys/time.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for accept4... yes checking for arc4random... yes checking for arc4random_buf... yes checking for arc4random_addrandom... no checking for eventfd... yes checking for epoll_create1... yes checking for fcntl... yes checking for getegid... yes checking for geteuid... yes checking for getifaddrs... yes checking for gettimeofday... yes checking for issetugid... no checking for mach_absolute_time... no checking for mmap... yes checking for nanosleep... yes checking for pipe... yes checking for pipe2... yes checking for putenv... yes checking for sendfile... yes checking for setenv... yes checking for setrlimit... yes checking for sigaction... yes checking for signal... yes checking for splice... yes checking for strlcpy... yes checking for strsep... yes checking for strtok_r... yes checking for strtoll... yes checking for sysctl... no checking for timerfd_create... yes checking for umask... yes checking for unsetenv... yes checking for usleep... yes checking for vasprintf... yes checking for getrandom... yes checking for getnameinfo... yes checking for getprotobynumber... yes checking for getservbyname... yes checking for inet_ntop... yes checking for inet_pton... yes checking for getaddrinfo... yes checking for F_SETFD in fcntl.h... yes checking for select... yes checking for poll... yes checking for epoll_ctl... yes checking for port_create... no checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for uint64_t... yes checking for uint32_t... yes checking for uint16_t... yes checking for uint8_t... yes checking for uintptr_t... yes checking for fd_mask... yes checking size of long long... 8 checking size of long... 8 checking size of int... 4 checking size of short... 2 checking size of size_t... 8 checking size of void *... 8 checking size of off_t... 8 checking size of time_t... 8 checking for struct in6_addr... yes checking for struct sockaddr_in6... yes checking for struct sockaddr_un... yes checking for sa_family_t... yes checking for struct addrinfo... yes checking for struct sockaddr_storage... yes checking for struct in6_addr.s6_addr32... yes checking for struct in6_addr.s6_addr16... yes checking for struct sockaddr_in.sin_len... no checking for struct sockaddr_in6.sin6_len... no checking for struct sockaddr_storage.ss_family... yes checking for struct sockaddr_storage.__ss_family... no checking for struct linger... yes checking for socklen_t... yes checking whether our compiler supports __func__... yes checking whether our compiler supports __FUNCTION__... yes checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking size of pthread_t... 8 checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libevent.pc config.status: creating libevent_openssl.pc config.status: creating libevent_pthreads.pc config.status: creating libevent_core.pc config.status: creating libevent_extra.pc config.status: creating Makefile config.status: creating config.h config.status: creating evconfig-private.h config.status: executing depfiles commands config.status: executing libtool commands GEN test/rpcgen-attempted GEN include/event2/event-config.h make all-am make[1]: Entering directory '/svr-setup/libevent-release-2.1.12-stable' CC buffer.lo CC bufferevent.lo CC bufferevent_filter.lo CC bufferevent_pair.lo CC bufferevent_ratelim.lo CC bufferevent_sock.lo CC event.lo event.c: In function ‘event_signal_closure’: event.c:1362:32: warning: storing the address of local variable ‘ncalls’ in ‘*ev.ev_.ev_signal.ev_pncalls’ [-Wdangling-pointer=] 1362 | ev->ev_pncalls = &ncalls; | ~~~~~~~~~~~~~~~^~~~~~~~~ event.c:1356:15: note: ‘ncalls’ declared here 1356 | short ncalls; | ^~~~~~ event.c:1354:61: note: ‘ev’ declared here 1354 | event_signal_closure(struct event_base *base, struct event *ev) | ~~~~~~~~~~~~~~^~ CC evmap.lo CC evthread.lo CC evutil.lo evutil.c:213:21: warning: argument 4 of type ‘int[2]’ with mismatched bound [-Warray-parameter=] 213 | evutil_socket_t fd[2]) In file included from evutil.c:85: ./include/event2/util.h:310:25: note: previously declared as ‘int[]’ 310 | #define evutil_socket_t int util-internal.h:306:47: note: in expansion of macro ‘evutil_socket_t’ 306 | int evutil_ersatz_socketpair_(int, int , int, evutil_socket_t[]); | ^~~~~~~~~~~~~~~ CC evutil_rand.lo CC evutil_time.lo evutil_rand.c: In function ‘evutil_secure_rng_init’: evutil_rand.c:56:16: warning: ignoring return value of ‘arc4random’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 56 | (void) arc4random(); | ^~~~~~~~~~~~ CC listener.lo CC log.lo CC select.lo CC poll.lo CC epoll.lo CC signal.lo CC evdns.lo CC event_tagging.lo CC evrpc.lo CC http.lo CC sample/event-read-fifo.o CC sample/hello-world.o CC sample/http-server.o CC sample/http-connect.o CC sample/signal-test.o CC sample/time-test.o CC sample/le_proxy-le-proxy.o sample/le-proxy.c: In function ‘eventcb’: sample/le-proxy.c:116:37: warning: ‘ERR_func_error_string’ is deprecated: Since OpenSSL 3.0 [-Wdeprecated-declarations] 116 | ERR_func_error_string(err); | ^~~~~~~~~~~~~~~~~~~~~ In file included from sample/le-proxy.c:35: /usr/include/openssl/err.h:459:35: note: declared here 459 | OSSL_DEPRECATEDIN_3_0 const char *ERR_func_error_string(unsigned long e); | ^~~~~~~~~~~~~~~~~~~~~ CC libevent_openssl_la-bufferevent_openssl.lo CC sample/https_client-https-client.o CC sample/https_client-hostcheck.o CC sample/https_client-openssl_hostname_validation.o CCLD libevent_core.la CC test/test-changelist.o CC test/test-dumpevents.o CC test/test-eof.o CC test/test-closed.o CC test/test-fdleak.o CC test/test-init.o CC test/test-ratelim.o CC test/test-time.o CC test/test-weof.o CC test/regress-regress.o CC test/regress-regress.gen.o CC test/regress-regress_buffer.o In file included from test/regress.h:35, from test/regress_buffer.c:64: test/regress_buffer.c: In function ‘test_evbuffer_pullup_with_empty’: test/tinytest_macros.h:116:22: warning: cast from function call of type ‘unsigned char *’ to non-matching type ‘long int’ [-Wbad-function-cast] 116 | type val1_ = (type)(a); \ | ^ test/tinytest_macros.h:144:9: note: in expansion of macro ‘tt_assert_test_fmt_type’ 144 | tt_assert_test_fmt_type(a,b,str_test,type,test,type,fmt, \ | ^~~~~~~~~~~~~~~~~~~~~~~ test/tinytest_macros.h:158:9: note: in expansion of macro ‘tt_assert_test_type’ 158 | tt_assert_test_type(a,b,#a" "#op" "#b,long,(val1_ op val2_), \ | ^~~~~~~~~~~~~~~~~~~ test/regress_buffer.c:444:9: note: in expansion of macro ‘tt_int_op’ 444 | tt_int_op(evbuffer_pullup(buf, -1), ==, NULL); | ^~~~~~~~~ CC test/regress-regress_bufferevent.o CC test/regress-regress_dns.o CC test/regress-regress_et.o CC test/regress-regress_finalize.o CC test/regress-regress_http.o CC test/regress-regress_listener.o CC test/regress-regress_main.o CC test/regress-regress_minheap.o CC test/regress-regress_rpc.o CC test/regress-regress_testutils.o CC test/regress-regress_util.o CC test/regress-tinytest.o CC test/regress-regress_thread.o CC test/regress-regress_zlib.o CC test/regress-regress_ssl.o CCLD libevent_extra.la CC evthread_pthread.lo CC sample/dns-example.o CCLD libevent.la CCLD libevent_openssl.la CC test/bench.o CC test/bench_cascade.o CC test/bench_http.o CC test/bench_httpclient.o CCLD test/test-changelist CCLD test/test-dumpevents CCLD test/test-eof CCLD test/test-closed CCLD test/test-fdleak CCLD test/test-init CCLD test/test-ratelim CCLD test/test-time CCLD test/test-weof CCLD libevent_pthreads.la CCLD sample/dns-example CCLD sample/event-read-fifo CCLD sample/hello-world CCLD sample/http-server CCLD sample/http-connect CCLD sample/signal-test CCLD sample/time-test CCLD sample/le-proxy CCLD sample/https-client CCLD test/bench CCLD test/bench_cascade CCLD test/bench_http CCLD test/bench_httpclient CCLD test/regress make[1]: Leaving directory '/svr-setup/libevent-release-2.1.12-stable' make install-am make[1]: Entering directory '/svr-setup/libevent-release-2.1.12-stable' make[2]: Entering directory '/svr-setup/libevent-release-2.1.12-stable' /bin/mkdir -p '/usr/lib64/bin' /bin/install -c event_rpcgen.py '/usr/lib64/bin' /bin/mkdir -p '/usr/lib64/lib' /bin/sh ./libtool --mode=install /bin/install -c libevent.la libevent_core.la libevent_extra.la libevent_pthreads.la libevent_openssl.la '/usr/lib64/lib' libtool: install: /bin/install -c .libs/libevent-2.1.so.7.0.1 /usr/lib64/lib/libevent-2.1.so.7.0.1 libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent-2.1.so.7.0.1 libevent-2.1.so.7 || { rm -f libevent-2.1.so.7 && ln -s libevent-2.1.so.7.0.1 libevent-2.1.so.7; }; }) libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent-2.1.so.7.0.1 libevent.so || { rm -f libevent.so && ln -s libevent-2.1.so.7.0.1 libevent.so; }; }) libtool: install: /bin/install -c .libs/libevent.lai /usr/lib64/lib/libevent.la libtool: install: /bin/install -c .libs/libevent_core-2.1.so.7.0.1 /usr/lib64/lib/libevent_core-2.1.so.7.0.1 libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_core-2.1.so.7.0.1 libevent_core-2.1.so.7 || { rm -f libevent_core-2.1.so.7 && ln -s libevent_core-2.1.so.7.0.1 libevent_core-2.1.so.7; }; }) libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_core-2.1.so.7.0.1 libevent_core.so || { rm -f libevent_core.so && ln -s libevent_core-2.1.so.7.0.1 libevent_core.so; }; }) libtool: install: /bin/install -c .libs/libevent_core.lai /usr/lib64/lib/libevent_core.la libtool: install: /bin/install -c .libs/libevent_extra-2.1.so.7.0.1 /usr/lib64/lib/libevent_extra-2.1.so.7.0.1 libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_extra-2.1.so.7.0.1 libevent_extra-2.1.so.7 || { rm -f libevent_extra-2.1.so.7 && ln -s libevent_extra-2.1.so.7.0.1 libevent_extra-2.1.so.7; }; }) libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_extra-2.1.so.7.0.1 libevent_extra.so || { rm -f libevent_extra.so && ln -s libevent_extra-2.1.so.7.0.1 libevent_extra.so; }; }) libtool: install: /bin/install -c .libs/libevent_extra.lai /usr/lib64/lib/libevent_extra.la libtool: install: /bin/install -c .libs/libevent_pthreads-2.1.so.7.0.1 /usr/lib64/lib/libevent_pthreads-2.1.so.7.0.1 libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_pthreads-2.1.so.7.0.1 libevent_pthreads-2.1.so.7 || { rm -f libevent_pthreads-2.1.so.7 && ln -s libevent_pthreads-2.1.so.7.0.1 libevent_pthreads-2.1.so.7; }; }) libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_pthreads-2.1.so.7.0.1 libevent_pthreads.so || { rm -f libevent_pthreads.so && ln -s libevent_pthreads-2.1.so.7.0.1 libevent_pthreads.so; }; }) libtool: install: /bin/install -c .libs/libevent_pthreads.lai /usr/lib64/lib/libevent_pthreads.la libtool: install: /bin/install -c .libs/libevent_openssl-2.1.so.7.0.1 /usr/lib64/lib/libevent_openssl-2.1.so.7.0.1 libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_openssl-2.1.so.7.0.1 libevent_openssl-2.1.so.7 || { rm -f libevent_openssl-2.1.so.7 && ln -s libevent_openssl-2.1.so.7.0.1 libevent_openssl-2.1.so.7; }; }) libtool: install: (cd /usr/lib64/lib && { ln -s -f libevent_openssl-2.1.so.7.0.1 libevent_openssl.so || { rm -f libevent_openssl.so && ln -s libevent_openssl-2.1.so.7.0.1 libevent_openssl.so; }; }) libtool: install: /bin/install -c .libs/libevent_openssl.lai /usr/lib64/lib/libevent_openssl.la libtool: install: /bin/install -c .libs/libevent.a /usr/lib64/lib/libevent.a libtool: install: chmod 644 /usr/lib64/lib/libevent.a libtool: install: ranlib /usr/lib64/lib/libevent.a libtool: install: /bin/install -c .libs/libevent_core.a /usr/lib64/lib/libevent_core.a libtool: install: chmod 644 /usr/lib64/lib/libevent_core.a libtool: install: ranlib /usr/lib64/lib/libevent_core.a libtool: install: /bin/install -c .libs/libevent_extra.a /usr/lib64/lib/libevent_extra.a libtool: install: chmod 644 /usr/lib64/lib/libevent_extra.a libtool: install: ranlib /usr/lib64/lib/libevent_extra.a libtool: install: /bin/install -c .libs/libevent_pthreads.a /usr/lib64/lib/libevent_pthreads.a libtool: install: chmod 644 /usr/lib64/lib/libevent_pthreads.a libtool: install: ranlib /usr/lib64/lib/libevent_pthreads.a libtool: install: /bin/install -c .libs/libevent_openssl.a /usr/lib64/lib/libevent_openssl.a libtool: install: chmod 644 /usr/lib64/lib/libevent_openssl.a libtool: install: ranlib /usr/lib64/lib/libevent_openssl.a libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/sbin" ldconfig -n /usr/lib64/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/lib64/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- /bin/mkdir -p '/usr/lib64/include' /bin/install -c -m 644 include/evdns.h include/event.h include/evhttp.h include/evrpc.h include/evutil.h '/usr/lib64/include' /bin/mkdir -p '/usr/lib64/include/event2' /bin/install -c -m 644 include/event2/buffer.h include/event2/buffer_compat.h include/event2/bufferevent.h include/event2/bufferevent_compat.h include/event2/bufferevent_struct.h include/event2/dns.h include/event2/dns_compat.h include/event2/dns_struct.h include/event2/event.h include/event2/event_compat.h include/event2/event_struct.h include/event2/http.h include/event2/http_compat.h include/event2/http_struct.h include/event2/keyvalq_struct.h include/event2/listener.h include/event2/rpc.h include/event2/rpc_compat.h include/event2/rpc_struct.h include/event2/tag.h include/event2/tag_compat.h include/event2/thread.h include/event2/util.h include/event2/visibility.h include/event2/bufferevent_ssl.h '/usr/lib64/include/event2' /bin/mkdir -p '/usr/lib64/include/event2' /bin/install -c -m 644 include/event2/event-config.h '/usr/lib64/include/event2' /bin/mkdir -p '/usr/lib64/lib/pkgconfig' /bin/install -c -m 644 libevent.pc libevent_core.pc libevent_extra.pc libevent_pthreads.pc libevent_openssl.pc '/usr/lib64/lib/pkgconfig' make[2]: Leaving directory '/svr-setup/libevent-release-2.1.12-stable' make[1]: Leaving directory '/svr-setup/libevent-release-2.1.12-stable' Compiling memcached... (B/svr-setup/libevent-release-2.1.12-stable cd /svr-setup checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for icc in use... no checking for clang in use... no checking for gcc options needed to detect all undeclared functions... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking whether __SUNPRO_C is declared... no checking for gcc option to accept ISO C99... none needed checking for sasl/sasl.h... yes checking for SASL_CB_GETCONF... no checking for SASL_CB_GETCONFPATH... yes checking for library containing sasl_server_init... -lsasl2 checking for gcov... /bin/gcov checking for main in -lgcov... yes checking size of void *... 8 checking for library containing clock_gettime... none required checking for library containing socket... none required checking for library containing gethostbyname... none required checking for libevent directory... /usr/lib64 checking for pkg-config... /bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for library containing gethugepagesizes... no checking for _Bool... yes checking for stdbool.h that conforms to C99... yes checking for inttypes.h... (cached) yes checking for sys/auxv.h... yes checking for sasl_callback_ft... yes checking for print macros for integers (C99 section 7.8.1)... yes checking for an ANSI C-conforming const... yes checking for socklen_t... yes checking whether byte ordering is bigendian... no checking for htonll... no checking for library containing pthread_create... none required checking for mlockall... yes checking for getpagesizes... no checking for sysconf... yes checking for memcntl... no checking for clock_gettime... yes checking for preadv... yes checking for pread... yes checking for eventfd... yes checking for pthread_setname_np... yes checking for accept4... yes checking for getopt_long... yes checking for alignment... none checking for GCC atomics... yes checking for GCC 64bit atomics... yes checking for setppriv... no checking for pledge... no checking for cap_enter... no checking for sandbox_init... no checking for xml2rfc... no checking for xsltproc... /bin/xsltproc checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory '/svr-setup/memcached-1.6.36' Making all in doc make[2]: Entering directory '/svr-setup/memcached-1.6.36/doc' make all-am make[3]: Entering directory '/svr-setup/memcached-1.6.36/doc' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/svr-setup/memcached-1.6.36/doc' make[2]: Leaving directory '/svr-setup/memcached-1.6.36/doc' make[2]: Entering directory '/svr-setup/memcached-1.6.36' gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-memcached.o -MD -MP -MF .deps/memcached-memcached.Tpo -c -o memcached-memcached.o `test -f 'memcached.c' || echo './'`memcached.c gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-hash.o -MD -MP -MF .deps/memcached-hash.Tpo -c -o memcached-hash.o `test -f 'hash.c' || echo './'`hash.c mv -f .deps/memcached-memcached.Tpo .deps/memcached-memcached.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-jenkins_hash.o -MD -MP -MF .deps/memcached-jenkins_hash.Tpo -c -o memcached-jenkins_hash.o `test -f 'jenkins_hash.c' || echo './'`jenkins_hash.c mv -f .deps/memcached-jenkins_hash.Tpo .deps/memcached-jenkins_hash.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-murmur3_hash.o -MD -MP -MF .deps/memcached-murmur3_hash.Tpo -c -o memcached-murmur3_hash.o `test -f 'murmur3_hash.c' || echo './'`murmur3_hash.c mv -f .deps/memcached-murmur3_hash.Tpo .deps/memcached-murmur3_hash.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-slabs.o -MD -MP -MF .deps/memcached-slabs.Tpo -c -o memcached-slabs.o `test -f 'slabs.c' || echo './'`slabs.c mv -f .deps/memcached-hash.Tpo .deps/memcached-hash.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-items.o -MD -MP -MF .deps/memcached-items.Tpo -c -o memcached-items.o `test -f 'items.c' || echo './'`items.c mv -f .deps/memcached-slabs.Tpo .deps/memcached-slabs.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-assoc.o -MD -MP -MF .deps/memcached-assoc.Tpo -c -o memcached-assoc.o `test -f 'assoc.c' || echo './'`assoc.c mv -f .deps/memcached-items.Tpo .deps/memcached-items.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-thread.o -MD -MP -MF .deps/memcached-thread.Tpo -c -o memcached-thread.o `test -f 'thread.c' || echo './'`thread.c mv -f .deps/memcached-assoc.Tpo .deps/memcached-assoc.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-daemon.o -MD -MP -MF .deps/memcached-daemon.Tpo -c -o memcached-daemon.o `test -f 'daemon.c' || echo './'`daemon.c mv -f .deps/memcached-daemon.Tpo .deps/memcached-daemon.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-stats_prefix.o -MD -MP -MF .deps/memcached-stats_prefix.Tpo -c -o memcached-stats_prefix.o `test -f 'stats_prefix.c' || echo './'`stats_prefix.c mv -f .deps/memcached-thread.Tpo .deps/memcached-thread.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-util.o -MD -MP -MF .deps/memcached-util.Tpo -c -o memcached-util.o `test -f 'util.c' || echo './'`util.c mv -f .deps/memcached-stats_prefix.Tpo .deps/memcached-stats_prefix.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-cache.o -MD -MP -MF .deps/memcached-cache.Tpo -c -o memcached-cache.o `test -f 'cache.c' || echo './'`cache.c mv -f .deps/memcached-cache.Tpo .deps/memcached-cache.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-bipbuffer.o -MD -MP -MF .deps/memcached-bipbuffer.Tpo -c -o memcached-bipbuffer.o `test -f 'bipbuffer.c' || echo './'`bipbuffer.c mv -f .deps/memcached-util.Tpo .deps/memcached-util.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-base64.o -MD -MP -MF .deps/memcached-base64.Tpo -c -o memcached-base64.o `test -f 'base64.c' || echo './'`base64.c mv -f .deps/memcached-bipbuffer.Tpo .deps/memcached-bipbuffer.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-logger.o -MD -MP -MF .deps/memcached-logger.Tpo -c -o memcached-logger.o `test -f 'logger.c' || echo './'`logger.c mv -f .deps/memcached-base64.Tpo .deps/memcached-base64.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-crawler.o -MD -MP -MF .deps/memcached-crawler.Tpo -c -o memcached-crawler.o `test -f 'crawler.c' || echo './'`crawler.c mv -f .deps/memcached-crawler.Tpo .deps/memcached-crawler.Po mv -f .deps/memcached-logger.Tpo .deps/memcached-logger.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-itoa_ljust.o -MD -MP -MF .deps/memcached-itoa_ljust.Tpo -c -o memcached-itoa_ljust.o `test -f 'itoa_ljust.c' || echo './'`itoa_ljust.c gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-slab_automove.o -MD -MP -MF .deps/memcached-slab_automove.Tpo -c -o memcached-slab_automove.o `test -f 'slab_automove.c' || echo './'`slab_automove.c mv -f .deps/memcached-itoa_ljust.Tpo .deps/memcached-itoa_ljust.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-slabs_mover.o -MD -MP -MF .deps/memcached-slabs_mover.Tpo -c -o memcached-slabs_mover.o `test -f 'slabs_mover.c' || echo './'`slabs_mover.c mv -f .deps/memcached-slab_automove.Tpo .deps/memcached-slab_automove.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-authfile.o -MD -MP -MF .deps/memcached-authfile.Tpo -c -o memcached-authfile.o `test -f 'authfile.c' || echo './'`authfile.c mv -f .deps/memcached-authfile.Tpo .deps/memcached-authfile.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-restart.o -MD -MP -MF .deps/memcached-restart.Tpo -c -o memcached-restart.o `test -f 'restart.c' || echo './'`restart.c mv -f .deps/memcached-slabs_mover.Tpo .deps/memcached-slabs_mover.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-proto_text.o -MD -MP -MF .deps/memcached-proto_text.Tpo -c -o memcached-proto_text.o `test -f 'proto_text.c' || echo './'`proto_text.c mv -f .deps/memcached-restart.Tpo .deps/memcached-restart.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-proto_bin.o -MD -MP -MF .deps/memcached-proto_bin.Tpo -c -o memcached-proto_bin.o `test -f 'proto_bin.c' || echo './'`proto_bin.c mv -f .deps/memcached-proto_bin.Tpo .deps/memcached-proto_bin.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-sasl_defs.o -MD -MP -MF .deps/memcached-sasl_defs.Tpo -c -o memcached-sasl_defs.o `test -f 'sasl_defs.c' || echo './'`sasl_defs.c mv -f .deps/memcached-proto_text.Tpo .deps/memcached-proto_text.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-extstore.o -MD -MP -MF .deps/memcached-extstore.Tpo -c -o memcached-extstore.o `test -f 'extstore.c' || echo './'`extstore.c mv -f .deps/memcached-sasl_defs.Tpo .deps/memcached-sasl_defs.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-crc32c.o -MD -MP -MF .deps/memcached-crc32c.Tpo -c -o memcached-crc32c.o `test -f 'crc32c.c' || echo './'`crc32c.c mv -f .deps/memcached-extstore.Tpo .deps/memcached-extstore.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-storage.o -MD -MP -MF .deps/memcached-storage.Tpo -c -o memcached-storage.o `test -f 'storage.c' || echo './'`storage.c mv -f .deps/memcached-crc32c.Tpo .deps/memcached-crc32c.Po gcc -DHAVE_CONFIG_H -I. -DNDEBUG -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached-slab_automove_extstore.o -MD -MP -MF .deps/memcached-slab_automove_extstore.Tpo -c -o memcached-slab_automove_extstore.o `test -f 'slab_automove_extstore.c' || echo './'`slab_automove_extstore.c mv -f .deps/memcached-slab_automove_extstore.Tpo .deps/memcached-slab_automove_extstore.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-memcached.o -MD -MP -MF .deps/memcached_debug-memcached.Tpo -c -o memcached_debug-memcached.o `test -f 'memcached.c' || echo './'`memcached.c mv -f .deps/memcached-storage.Tpo .deps/memcached-storage.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-hash.o -MD -MP -MF .deps/memcached_debug-hash.Tpo -c -o memcached_debug-hash.o `test -f 'hash.c' || echo './'`hash.c mv -f .deps/memcached_debug-memcached.Tpo .deps/memcached_debug-memcached.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-jenkins_hash.o -MD -MP -MF .deps/memcached_debug-jenkins_hash.Tpo -c -o memcached_debug-jenkins_hash.o `test -f 'jenkins_hash.c' || echo './'`jenkins_hash.c mv -f .deps/memcached_debug-jenkins_hash.Tpo .deps/memcached_debug-jenkins_hash.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-murmur3_hash.o -MD -MP -MF .deps/memcached_debug-murmur3_hash.Tpo -c -o memcached_debug-murmur3_hash.o `test -f 'murmur3_hash.c' || echo './'`murmur3_hash.c mv -f .deps/memcached_debug-hash.Tpo .deps/memcached_debug-hash.Po mv -f .deps/memcached_debug-murmur3_hash.Tpo .deps/memcached_debug-murmur3_hash.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-slabs.o -MD -MP -MF .deps/memcached_debug-slabs.Tpo -c -o memcached_debug-slabs.o `test -f 'slabs.c' || echo './'`slabs.c gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-items.o -MD -MP -MF .deps/memcached_debug-items.Tpo -c -o memcached_debug-items.o `test -f 'items.c' || echo './'`items.c mv -f .deps/memcached_debug-slabs.Tpo .deps/memcached_debug-slabs.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-assoc.o -MD -MP -MF .deps/memcached_debug-assoc.Tpo -c -o memcached_debug-assoc.o `test -f 'assoc.c' || echo './'`assoc.c mv -f .deps/memcached_debug-items.Tpo .deps/memcached_debug-items.Po mv -f .deps/memcached_debug-assoc.Tpo .deps/memcached_debug-assoc.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-thread.o -MD -MP -MF .deps/memcached_debug-thread.Tpo -c -o memcached_debug-thread.o `test -f 'thread.c' || echo './'`thread.c gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-daemon.o -MD -MP -MF .deps/memcached_debug-daemon.Tpo -c -o memcached_debug-daemon.o `test -f 'daemon.c' || echo './'`daemon.c mv -f .deps/memcached_debug-daemon.Tpo .deps/memcached_debug-daemon.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-stats_prefix.o -MD -MP -MF .deps/memcached_debug-stats_prefix.Tpo -c -o memcached_debug-stats_prefix.o `test -f 'stats_prefix.c' || echo './'`stats_prefix.c mv -f .deps/memcached_debug-stats_prefix.Tpo .deps/memcached_debug-stats_prefix.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-util.o -MD -MP -MF .deps/memcached_debug-util.Tpo -c -o memcached_debug-util.o `test -f 'util.c' || echo './'`util.c mv -f .deps/memcached_debug-thread.Tpo .deps/memcached_debug-thread.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-cache.o -MD -MP -MF .deps/memcached_debug-cache.Tpo -c -o memcached_debug-cache.o `test -f 'cache.c' || echo './'`cache.c mv -f .deps/memcached_debug-cache.Tpo .deps/memcached_debug-cache.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-bipbuffer.o -MD -MP -MF .deps/memcached_debug-bipbuffer.Tpo -c -o memcached_debug-bipbuffer.o `test -f 'bipbuffer.c' || echo './'`bipbuffer.c mv -f .deps/memcached_debug-util.Tpo .deps/memcached_debug-util.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-base64.o -MD -MP -MF .deps/memcached_debug-base64.Tpo -c -o memcached_debug-base64.o `test -f 'base64.c' || echo './'`base64.c mv -f .deps/memcached_debug-bipbuffer.Tpo .deps/memcached_debug-bipbuffer.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-logger.o -MD -MP -MF .deps/memcached_debug-logger.Tpo -c -o memcached_debug-logger.o `test -f 'logger.c' || echo './'`logger.c mv -f .deps/memcached_debug-base64.Tpo .deps/memcached_debug-base64.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-crawler.o -MD -MP -MF .deps/memcached_debug-crawler.Tpo -c -o memcached_debug-crawler.o `test -f 'crawler.c' || echo './'`crawler.c mv -f .deps/memcached_debug-logger.Tpo .deps/memcached_debug-logger.Po mv -f .deps/memcached_debug-crawler.Tpo .deps/memcached_debug-crawler.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-itoa_ljust.o -MD -MP -MF .deps/memcached_debug-itoa_ljust.Tpo -c -o memcached_debug-itoa_ljust.o `test -f 'itoa_ljust.c' || echo './'`itoa_ljust.c gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-slab_automove.o -MD -MP -MF .deps/memcached_debug-slab_automove.Tpo -c -o memcached_debug-slab_automove.o `test -f 'slab_automove.c' || echo './'`slab_automove.c mv -f .deps/memcached_debug-itoa_ljust.Tpo .deps/memcached_debug-itoa_ljust.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-slabs_mover.o -MD -MP -MF .deps/memcached_debug-slabs_mover.Tpo -c -o memcached_debug-slabs_mover.o `test -f 'slabs_mover.c' || echo './'`slabs_mover.c mv -f .deps/memcached_debug-slab_automove.Tpo .deps/memcached_debug-slab_automove.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-authfile.o -MD -MP -MF .deps/memcached_debug-authfile.Tpo -c -o memcached_debug-authfile.o `test -f 'authfile.c' || echo './'`authfile.c mv -f .deps/memcached_debug-authfile.Tpo .deps/memcached_debug-authfile.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-restart.o -MD -MP -MF .deps/memcached_debug-restart.Tpo -c -o memcached_debug-restart.o `test -f 'restart.c' || echo './'`restart.c mv -f .deps/memcached_debug-slabs_mover.Tpo .deps/memcached_debug-slabs_mover.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-proto_text.o -MD -MP -MF .deps/memcached_debug-proto_text.Tpo -c -o memcached_debug-proto_text.o `test -f 'proto_text.c' || echo './'`proto_text.c mv -f .deps/memcached_debug-restart.Tpo .deps/memcached_debug-restart.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-proto_bin.o -MD -MP -MF .deps/memcached_debug-proto_bin.Tpo -c -o memcached_debug-proto_bin.o `test -f 'proto_bin.c' || echo './'`proto_bin.c mv -f .deps/memcached_debug-proto_bin.Tpo .deps/memcached_debug-proto_bin.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-sasl_defs.o -MD -MP -MF .deps/memcached_debug-sasl_defs.Tpo -c -o memcached_debug-sasl_defs.o `test -f 'sasl_defs.c' || echo './'`sasl_defs.c mv -f .deps/memcached_debug-proto_text.Tpo .deps/memcached_debug-proto_text.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-extstore.o -MD -MP -MF .deps/memcached_debug-extstore.Tpo -c -o memcached_debug-extstore.o `test -f 'extstore.c' || echo './'`extstore.c mv -f .deps/memcached_debug-sasl_defs.Tpo .deps/memcached_debug-sasl_defs.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-crc32c.o -MD -MP -MF .deps/memcached_debug-crc32c.Tpo -c -o memcached_debug-crc32c.o `test -f 'crc32c.c' || echo './'`crc32c.c mv -f .deps/memcached_debug-crc32c.Tpo .deps/memcached_debug-crc32c.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-storage.o -MD -MP -MF .deps/memcached_debug-storage.Tpo -c -o memcached_debug-storage.o `test -f 'storage.c' || echo './'`storage.c mv -f .deps/memcached_debug-extstore.Tpo .deps/memcached_debug-extstore.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT memcached_debug-slab_automove_extstore.o -MD -MP -MF .deps/memcached_debug-slab_automove_extstore.Tpo -c -o memcached_debug-slab_automove_extstore.o `test -f 'slab_automove_extstore.c' || echo './'`slab_automove_extstore.c mv -f .deps/memcached_debug-slab_automove_extstore.Tpo .deps/memcached_debug-slab_automove_extstore.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT sizes.o -MD -MP -MF .deps/sizes.Tpo -c -o sizes.o sizes.c mv -f .deps/memcached_debug-storage.Tpo .deps/memcached_debug-storage.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT testapp.o -MD -MP -MF .deps/testapp.Tpo -c -o testapp.o testapp.c mv -f .deps/sizes.Tpo .deps/sizes.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c mv -f .deps/util.Tpo .deps/util.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT stats_prefix.o -MD -MP -MF .deps/stats_prefix.Tpo -c -o stats_prefix.o stats_prefix.c mv -f .deps/stats_prefix.Tpo .deps/stats_prefix.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT jenkins_hash.o -MD -MP -MF .deps/jenkins_hash.Tpo -c -o jenkins_hash.o jenkins_hash.c mv -f .deps/testapp.Tpo .deps/testapp.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT murmur3_hash.o -MD -MP -MF .deps/murmur3_hash.Tpo -c -o murmur3_hash.o murmur3_hash.c mv -f .deps/jenkins_hash.Tpo .deps/jenkins_hash.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT cache.o -MD -MP -MF .deps/cache.Tpo -c -o cache.o cache.c mv -f .deps/murmur3_hash.Tpo .deps/murmur3_hash.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT crc32c.o -MD -MP -MF .deps/crc32c.Tpo -c -o crc32c.o crc32c.c mv -f .deps/cache.Tpo .deps/cache.Po gcc -DHAVE_CONFIG_H -I. -I/usr/lib64/include -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -MT timedrun.o -MD -MP -MF .deps/timedrun.Tpo -c -o timedrun.o timedrun.c mv -f .deps/crc32c.Tpo .deps/crc32c.Po gcc -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -L/usr/lib64/lib -Wl,-rpath,/usr/lib64/lib -o memcached memcached-memcached.o memcached-hash.o memcached-jenkins_hash.o memcached-murmur3_hash.o memcached-slabs.o memcached-items.o memcached-assoc.o memcached-thread.o memcached-daemon.o memcached-stats_prefix.o memcached-util.o memcached-cache.o memcached-bipbuffer.o memcached-base64.o memcached-logger.o memcached-crawler.o memcached-itoa_ljust.o memcached-slab_automove.o memcached-slabs_mover.o memcached-authfile.o memcached-restart.o memcached-proto_text.o memcached-proto_bin.o memcached-sasl_defs.o memcached-extstore.o memcached-crc32c.o memcached-storage.o memcached-slab_automove_extstore.o -levent -lsasl2 mv -f .deps/timedrun.Tpo .deps/timedrun.Po gcc -fprofile-arcs -ftest-coverage -DMEMCACHED_DEBUG -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -L/usr/lib64/lib -Wl,-rpath,/usr/lib64/lib -o memcached-debug memcached_debug-memcached.o memcached_debug-hash.o memcached_debug-jenkins_hash.o memcached_debug-murmur3_hash.o memcached_debug-slabs.o memcached_debug-items.o memcached_debug-assoc.o memcached_debug-thread.o memcached_debug-daemon.o memcached_debug-stats_prefix.o memcached_debug-util.o memcached_debug-cache.o memcached_debug-bipbuffer.o memcached_debug-base64.o memcached_debug-logger.o memcached_debug-crawler.o memcached_debug-itoa_ljust.o memcached_debug-slab_automove.o memcached_debug-slabs_mover.o memcached_debug-authfile.o memcached_debug-restart.o memcached_debug-proto_text.o memcached_debug-proto_bin.o memcached_debug-sasl_defs.o memcached_debug-extstore.o memcached_debug-crc32c.o memcached_debug-storage.o memcached_debug-slab_automove_extstore.o -lgcov -levent -lsasl2 gcc -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -L/usr/lib64/lib -Wl,-rpath,/usr/lib64/lib -o sizes sizes.o -levent -lsasl2 gcc -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -L/usr/lib64/lib -Wl,-rpath,/usr/lib64/lib -o testapp testapp.o util.o stats_prefix.o jenkins_hash.o murmur3_hash.o cache.o crc32c.o -levent -lsasl2 gcc -pthread -pthread -Wall -pedantic -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -L/usr/lib64/lib -Wl,-rpath,/usr/lib64/lib -o timedrun timedrun.o -levent -lsasl2 make[2]: Leaving directory '/svr-setup/memcached-1.6.36' make[1]: Leaving directory '/svr-setup/memcached-1.6.36' make install-recursive make[1]: Entering directory '/svr-setup/memcached-1.6.36' Making install in doc make[2]: Entering directory '/svr-setup/memcached-1.6.36/doc' make install-am make[3]: Entering directory '/svr-setup/memcached-1.6.36/doc' make[4]: Entering directory '/svr-setup/memcached-1.6.36/doc' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/share/man/man1' /bin/install -c -m 644 memcached.1 '/usr/local/share/man/man1' make[4]: Leaving directory '/svr-setup/memcached-1.6.36/doc' make[3]: Leaving directory '/svr-setup/memcached-1.6.36/doc' make[2]: Leaving directory '/svr-setup/memcached-1.6.36/doc' make[2]: Entering directory '/svr-setup/memcached-1.6.36' make[3]: Entering directory '/svr-setup/memcached-1.6.36' /bin/mkdir -p '/usr/local/bin' /bin/install -c memcached '/usr/local/bin' /bin/mkdir -p '/usr/local/include/memcached' /bin/install -c -m 644 protocol_binary.h xxhash.h '/usr/local/include/memcached' make[3]: Leaving directory '/svr-setup/memcached-1.6.36' make[2]: Leaving directory '/svr-setup/memcached-1.6.36' make[1]: Leaving directory '/svr-setup/memcached-1.6.36' Compiled memcached server... (BRedirecting to /bin/systemctl stop memcached.service Failed to stop memcached.service: Unit memcached.service not loaded. Redirecting to /bin/systemctl start memcached.service Failed to start memcached.service: Unit memcached.service not found. /usr/local/src/centminmod/inc/memcached_install.inc: line 288: php-config: command not found Compiling memcache PHP extension for PHP 8.x ... /svr-setup /svr-setup/memcached-1.6.36 Cloning into 'memcache-php8'... real 0m0.192s user 0m0.103s sys 0m0.029s skip git checkout 4a9e4ab0d1 /usr/local/src/centminmod/inc/memcached_install.inc: line 355: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/memcached_install.inc: line 356: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. PHP memcache extension installed (B/svr-setup/memcached-1.6.36 Compiling libmemcached-1.0.18 ... (B/svr-setup/memcached-1.6.36 cd /svr-setup /usr/local/src/centminmod/inc/memcached_install.inc: line 424: ./config/autorun.sh: No such file or directory checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking whether make supports nested variables... yes checking whether UID '0' is supported by ustar format... yes checking whether GID '0' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking dependency style of gcc... gcc3 checking dependency style of g++... gcc3 checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B checking the name lister (/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /bin/ld -m elf_x86_64 checking if the linker (/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for cos in -lm... yes checking for gcc option to accept ISO C99... none needed checking whether C++ compiler accepts -std=c++0x... yes checking whether the linker accepts ... yes configure: adding automake macro support configure: creating aminclude.am checking for debug... no checking for vcs system... none checking for vcs checkout... no checking for assert... no checking whether make supports nested variables... (cached) yes checking for libmemcachedprotocol... no checking for mysqld... nocommand configure: WARNING: mysqld not found in /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin checking for mysql_config... no checking for mysql_config5... no checking whether gearmand executable path has been provided... no checking for gearmand... no checking libgearman/gearman.h usability... no checking libgearman/gearman.h presence... no checking for libgearman/gearman.h... no checking for location of cstdint... checking for location of cinttypes... checking whether byte ordering is bigendian... no checking for htonll... no checking for working SO_SNDTIMEO... yes checking for working SO_RCVTIMEO... yes checking for supported struct padding... yes checking for dpkg-gensymbols... no checking for flex... flex checking for perl... perl checking for valgrind... valgrind checking for wine... no checking for bison... bison --warnings=all checking for rpmbuild... rpmbuild checking for rpmdev-setuptree... no checking for rpm... rpm checking for gawk... (cached) gawk checking for a sed that does not truncate output... (cached) /bin/sed checking whether memcached executable path has been provided... no checking for memcached... /usr/local/bin/memcached memcached version "1.6.36" checking whether sphinx-build executable path has been provided... no checking for sphinx-build... : checking whether lcov executable path has been provided... no checking for lcov... no checking whether genhtml executable path has been provided... no checking for genhtml... no checking for library containing getopt_long... none required checking for library containing gethostbyname... none required checking for arpa/inet.h... yes checking for errno.h... yes checking for execinfo.h... yes checking for fcntl.h... yes checking for features.h... yes checking for fnmatch.h... yes checking for inttypes.h... (cached) yes checking for libintl.h... yes checking for limits.h... yes checking for mach/mach.h... no checking for malloc.h... yes checking for math.h... yes checking for netdb.h... yes checking for netinet/in.h... yes checking for netinet/tcp.h... yes checking for poll.h... yes checking for pthread.h... yes checking for spawn.h... yes checking for stdarg.h... yes checking for stddef.h... yes checking for stdio.h... yes checking for stdlib.h... (cached) yes checking for sys/socket.h... yes checking for sys/sysctl.h... no checking for sys/time.h... yes checking for sys/types.h... (cached) yes checking for sys/un.h... yes checking for sys/wait.h... yes checking for syslog.h... yes checking for time.h... yes checking for unistd.h... (cached) yes checking for winsock2.h... no checking for ws2tcpip.h... no checking for alarm... yes checking for atexit... yes checking for clock_gettime... yes checking for dup2... yes checking for fcntl... yes checking for floor... no checking for getcwd... yes checking for getline... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memchr... yes checking for memmove... yes checking for memset... yes checking for pipe2... yes checking for putenv... yes checking for select... yes checking for setenv... yes checking for sigignore... yes checking for socket... yes checking for sqrt... no checking for strcasecmp... yes checking for strchr... yes checking for strdup... yes checking for strerror... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for strtoull... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for error_at_line... yes checking for pid_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking whether strerror_r is declared... yes checking for strerror_r... yes checking whether strerror_r returns char *... yes checking umem.h usability... no checking umem.h presence... no checking for umem.h... no checking for C compiler vendor... gnu checking for in_port_t... yes checking for ptrdiff_t... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for int8_t... yes checking for off_t... yes checking for pid_t... (cached) yes checking for ssize_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking whether byte ordering is bigendian... (cached) no checking for an ANSI C-conforming const... yes checking for inline... inline checking for working volatile... yes checking for C/C++ restrict keyword... __restrict checking whether the compiler supports GCC C++ ABI name demangling... yes checking checking for cxx_gcc_abi_demangle... "yes" checking test for a working libevent... no checking for clock_gettime in -lrt... yes checking atomic.h usability... no checking atomic.h presence... no checking for atomic.h... no checking for setppriv... no checking for MSG_NOSIGNAL... yes checking for MSG_DONTWAIT... yes checking for MSG_MORE... yes checking uuid/uuid.h usability... yes checking uuid/uuid.h presence... yes checking for uuid/uuid.h... yes checking check to see if -luuid is needed... yes checking check to see if -luuid is needed... yes checking for uuid_generate_time_safe... yes checking sasl/sasl.h usability... yes checking sasl/sasl.h presence... yes checking for sasl/sasl.h... yes checking for main in -lsasl2... yes checking checking to see if sasl works... "yes" checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking check for pthread_timedjoin_np... yes checking checking to see if enabling sasl... "yes" checking whether the compiler provides atomic builtins... yes checking whether byte ordering is bigendian... (cached) no checking for assert... no checking C Compiler version... "gcc (GCC) 14.2.1 20250110 (Red Hat 14.2.1-7)" checking C++ Compiler version... "g++ (GCC) 14.2.1 20250110 (Red Hat 14.2.1-7)" checking MINGW... checking whether __MINGW32__ is declared... no no checking whether the -Werror option is usable... yes checking for simple visibility declarations... yes checking if all warnings into errors... no checking if all warnings into errors... (cached) no checking whether the linker accepts -z... no checking whether the linker accepts relro... no checking whether the linker accepts -z... (cached) no checking whether the linker accepts now... no checking whether C compiler accepts -g... yes checking whether C compiler accepts -O2... yes checking whether C compiler accepts -Wno-unknown-pragmas... yes checking whether C compiler accepts -Wno-pragmas... yes checking whether C compiler accepts -Wall... yes checking whether C compiler accepts -Wextra... yes checking whether C compiler accepts -Weverything... no checking whether C compiler accepts -Wthis-test-should-fail... no checking whether C compiler accepts -Wunsuffixed-float-constants... yes checking whether C compiler accepts -Wjump-misses-init... yes checking whether C compiler accepts -Wno-attributes... yes checking whether C compiler accepts -Waddress... yes checking whether C compiler accepts -Wvarargs... yes checking whether C compiler accepts -Warray-bounds... yes checking whether C compiler accepts -Wbad-function-cast... yes checking whether C compiler accepts -Wchar-subscripts... yes checking whether C compiler accepts -Wcomment... yes checking whether C compiler accepts -Wfloat-equal... yes checking whether C compiler accepts -Wformat-security... yes checking whether C compiler accepts -Wformat=2... yes checking whether C compiler accepts -Wformat-y2k... yes checking whether C compiler accepts -Wlogical-op... yes checking whether C compiler accepts -Wmaybe-uninitialized... yes checking whether C compiler accepts -Wmissing-field-initializers... yes checking whether C compiler accepts -Wmissing-noreturn... yes checking whether C compiler accepts -Wmissing-prototypes... yes checking whether C compiler accepts -Wnested-externs... yes checking whether C compiler accepts -Wnormalized=id... yes checking whether C compiler accepts -Woverride-init... yes checking whether C compiler accepts -Wpointer-arith... yes checking whether C compiler accepts -Wpointer-sign... yes checking whether C compiler accepts -Wredundant-decls... yes checking whether C compiler accepts -Wshadow... yes checking whether C compiler accepts -Wshorten-64-to-32... no checking whether C compiler accepts -Wsign-compare... yes checking whether C compiler accepts -Wstrict-overflow=1... yes checking whether C compiler accepts -Wstrict-prototypes... no checking whether C compiler accepts -Wswitch-enum... yes checking whether C compiler accepts -Wtrampolines... yes checking whether C compiler accepts -Wundef... yes checking whether C compiler accepts -Wunsafe-loop-optimizations... yes checking whether C compiler accepts -funsafe-loop-optimizations... yes checking whether C compiler accepts -Wclobbered... yes checking whether C compiler accepts -Wunused... yes checking whether C compiler accepts -Wunused-result... yes checking whether C compiler accepts -Wunused-variable... yes checking whether C compiler accepts -Wunused-parameter... yes checking whether C compiler accepts -Wunused-local-typedefs... yes checking whether C compiler accepts -Wwrite-strings... yes checking whether C compiler accepts -fwrapv... yes checking whether C compiler accepts -fmudflapt... no checking whether C compiler accepts -pipe... yes checking whether C compiler accepts -fPIE... yes checking whether C compiler accepts -pie... yes checking whether C compiler accepts -Wsizeof-pointer-memaccess... yes checking whether C compiler accepts -Wpacked... yes checking whether C++ compiler accepts -g... yes checking whether C++ compiler accepts -O2... yes checking whether C++ compiler accepts -Wno-unknown-pragmas... yes checking whether C++ compiler accepts -Wno-pragmas... yes checking whether C++ compiler accepts -Wall... yes checking whether C++ compiler accepts -Wextra... yes checking whether C++ compiler accepts -Weverything... no checking whether C++ compiler accepts -Wthis-test-should-fail... no checking whether C++ compiler accepts -Wno-attributes... yes checking whether C++ compiler accepts -Wvarargs... yes checking whether C++ compiler accepts -Waddress... yes checking whether C++ compiler accepts -Warray-bounds... yes checking whether C++ compiler accepts -Wchar-subscripts... yes checking whether C++ compiler accepts -Wcomment... yes checking whether C++ compiler accepts -Wctor-dtor-privacy... yes checking whether C++ compiler accepts -Wfloat-equal... yes checking whether C++ compiler accepts -Wformat=2... yes checking whether C++ compiler accepts -Wformat-y2k... yes checking whether C++ compiler accepts -Wmaybe-uninitialized... yes checking whether C++ compiler accepts -Wmissing-field-initializers... yes checking whether C++ compiler accepts -Wlogical-op... yes checking whether C++ compiler accepts -Wnon-virtual-dtor... yes checking whether C++ compiler accepts -Wnormalized=id... yes checking whether C++ compiler accepts -Woverloaded-virtual... yes checking whether C++ compiler accepts -Wpointer-arith... yes checking whether C++ compiler accepts -Wredundant-decls... yes checking whether C++ compiler accepts -Wshadow... yes checking whether C++ compiler accepts -Wshorten-64-to-32... no checking whether C++ compiler accepts -Wsign-compare... yes checking whether C++ compiler accepts -Wstrict-overflow=1... yes checking whether C++ compiler accepts -Wswitch-enum... yes checking whether C++ compiler accepts -Wtrampolines... yes checking whether C++ compiler accepts -Wundef... yes checking whether C++ compiler accepts -Wunsafe-loop-optimizations... yes checking whether C++ compiler accepts -funsafe-loop-optimizations... yes checking whether C++ compiler accepts -Wc++11-compat... yes checking whether C++ compiler accepts -Wclobbered... yes checking whether C++ compiler accepts -Wunused... yes checking whether C++ compiler accepts -Wunused-result... yes checking whether C++ compiler accepts -Wunused-variable... yes checking whether C++ compiler accepts -Wunused-parameter... yes checking whether C++ compiler accepts -Wunused-local-typedefs... yes checking whether C++ compiler accepts -Wwrite-strings... yes checking whether C++ compiler accepts -Wformat-security... yes checking whether C++ compiler accepts -fwrapv... yes checking whether C++ compiler accepts -fmudflapt... no checking whether C++ compiler accepts -pipe... yes checking whether C++ compiler accepts -fPIE... yes checking whether C++ compiler accepts -pie... yes checking whether C++ compiler accepts -Wsizeof-pointer-memaccess... yes checking whether C++ compiler accepts -Wpacked... yes checking the number of available CPUs... 2 configure: added jobserver support to make for 3 jobs checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libhashkit/hashkitcon.h config.status: creating libhashkit-1.0/configure.h config.status: creating libtest/version.h config.status: creating libtest/yatlcon.h config.status: creating Makefile config.status: creating docs/conf.py config.status: creating libmemcached-1.0/configure.h config.status: creating support/libmemcached.pc config.status: creating support/libmemcached.spec config.status: creating mem_config.h config.status: executing depfiles commands config.status: executing libtool commands --- Configuration summary for libmemcached version 1.0.18 * Installation prefix: /usr/local * System type: unknown-linux-gnu * Host CPU: x86_64 * C Compiler: gcc (GCC) 14.2.1 20250110 (Red Hat 14.2.1-7) * C Flags: -g -O2 -Wno-unknown-pragmas -Wno-pragmas -Wall -Wextra -Wunsuffixed-float-constants -Wjump-misses-init -Wno-attributes -Waddress -Wvarargs -Warray-bounds -Wbad-function-cast -Wchar-subscripts -Wcomment -Wfloat-equal -Wformat-security -Wformat=2 -Wformat-y2k -Wlogical-op -Wmaybe-uninitialized -Wmissing-field-initializers -Wmissing-noreturn -Wmissing-prototypes -Wnested-externs -Wnormalized=id -Woverride-init -Wpointer-arith -Wpointer-sign -Wredundant-decls -Wshadow -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wtrampolines -Wundef -Wunsafe-loop-optimizations -funsafe-loop-optimizations -Wclobbered -Wunused -Wunused-result -Wunused-variable -Wunused-parameter -Wunused-local-typedefs -Wwrite-strings -fwrapv -pipe -fPIE -pie -Wsizeof-pointer-memaccess -Wpacked * C++ Compiler: g++ (GCC) 14.2.1 20250110 (Red Hat 14.2.1-7) * C++ Flags: -O2 -m64 -march=x86-64 -pipe -Wno-deprecated-declarations -g -Wno-unknown-pragmas -Wno-pragmas -Wall -Wextra -Wno-attributes -Wvarargs -Waddress -Warray-bounds -Wchar-subscripts -Wcomment -Wctor-dtor-privacy -Wfloat-equal -Wformat=2 -Wformat-y2k -Wmaybe-uninitialized -Wmissing-field-initializers -Wlogical-op -Wnon-virtual-dtor -Wnormalized=id -Woverloaded-virtual -Wpointer-arith -Wredundant-decls -Wshadow -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wtrampolines -Wundef -Wunsafe-loop-optimizations -funsafe-loop-optimizations -Wc++11-compat -Wclobbered -Wunused -Wunused-result -Wunused-variable -Wunused-parameter -Wunused-local-typedefs -Wwrite-strings -Wformat-security -fwrapv -fPIE -pie -Wsizeof-pointer-memaccess -Wpacked * CPP Flags: -fvisibility=hidden * LIB Flags: * Assertions enabled: no * Debug enabled: no * Shared: yes * Warnings as failure: no * SASL support: yes * make -j: 3 * VCS checkout: no --- make -j3 all-am make[1]: Entering directory '/svr-setup/libmemcached-1.0.18' make[1]: warning: -j3 forced in submake: resetting jobserver mode. CXX libhashkit/libmemcached_libmemcached_la-aes.lo CXX libhashkit/libmemcached_libmemcached_la-algorithm.lo CXX libhashkit/libmemcached_libmemcached_la-behavior.lo CXX libhashkit/libmemcached_libmemcached_la-crc32.lo CXX libhashkit/libmemcached_libmemcached_la-digest.lo CXX libhashkit/libmemcached_libmemcached_la-encrypt.lo CXX libhashkit/libmemcached_libmemcached_la-fnv_32.lo CXX libhashkit/libmemcached_libmemcached_la-fnv_64.lo CXX libhashkit/libmemcached_libmemcached_la-function.lo CXX libhashkit/libmemcached_libmemcached_la-has.lo CXX libhashkit/libmemcached_libmemcached_la-hashkit.lo CXX libhashkit/libmemcached_libmemcached_la-jenkins.lo libhashkit/jenkins.cc: In function ‘uint32_t hashkit_jenkins(const char*, size_t, void*)’: libhashkit/jenkins.cc:230:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 230 | case 12: c+=((uint32_t)k[11])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:231:5: note: here 231 | case 11: c+=((uint32_t)k[10])<<16; | ^~~~ libhashkit/jenkins.cc:231:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 231 | case 11: c+=((uint32_t)k[10])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:232:5: note: here 232 | case 10: c+=((uint32_t)k[9])<<8; | ^~~~ libhashkit/jenkins.cc:232:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 232 | case 10: c+=((uint32_t)k[9])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:233:5: note: here 233 | case 9 : c+=k[8]; | ^~~~ libhashkit/jenkins.cc:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 233 | case 9 : c+=k[8]; | ~^~~~~~ libhashkit/jenkins.cc:234:5: note: here 234 | case 8 : b+=((uint32_t)k[7])<<24; | ^~~~ libhashkit/jenkins.cc:234:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 234 | case 8 : b+=((uint32_t)k[7])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:235:5: note: here 235 | case 7 : b+=((uint32_t)k[6])<<16; | ^~~~ libhashkit/jenkins.cc:235:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 235 | case 7 : b+=((uint32_t)k[6])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:236:5: note: here 236 | case 6 : b+=((uint32_t)k[5])<<8; | ^~~~ libhashkit/jenkins.cc:236:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 236 | case 6 : b+=((uint32_t)k[5])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:237:5: note: here 237 | case 5 : b+=k[4]; | ^~~~ libhashkit/jenkins.cc:237:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 237 | case 5 : b+=k[4]; | ~^~~~~~ libhashkit/jenkins.cc:238:5: note: here 238 | case 4 : a+=((uint32_t)k[3])<<24; | ^~~~ libhashkit/jenkins.cc:238:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 238 | case 4 : a+=((uint32_t)k[3])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:239:5: note: here 239 | case 3 : a+=((uint32_t)k[2])<<16; | ^~~~ libhashkit/jenkins.cc:239:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 239 | case 3 : a+=((uint32_t)k[2])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:240:5: note: here 240 | case 2 : a+=((uint32_t)k[1])<<8; | ^~~~ libhashkit/jenkins.cc:240:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 240 | case 2 : a+=((uint32_t)k[1])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:241:5: note: here 241 | case 1 : a+=k[0]; | ^~~~ CXX libhashkit/libmemcached_libmemcached_la-ketama.lo CXX libhashkit/libmemcached_libmemcached_la-md5.lo CXX libhashkit/libmemcached_libmemcached_la-murmur.lo libhashkit/murmur.cc: In function ‘uint32_t hashkit_murmur(const char*, size_t, void*)’: libhashkit/murmur.cc:99:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 99 | case 3: h ^= ((uint32_t)data[2]) << 16; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:100:3: note: here 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ^~~~ libhashkit/murmur.cc:100:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:101:3: note: here 101 | case 1: h ^= data[0]; | ^~~~ CXX libhashkit/libmemcached_libmemcached_la-murmur3.lo libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_32(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:112:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 112 | case 3: k1 ^= tail[2] << 16; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:113:3: note: here 113 | case 2: k1 ^= tail[1] << 8; | ^~~~ libhashkit/murmur3.cc:113:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 113 | case 2: k1 ^= tail[1] << 8; | ~~~^~~~~~~~~~~~~~~ libhashkit/murmur3.cc:114:3: note: here 114 | case 1: k1 ^= tail[0]; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:188:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 188 | case 15: k4 ^= tail[14] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:189:3: note: here 189 | case 14: k4 ^= tail[13] << 8; | ^~~~ libhashkit/murmur3.cc:189:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 189 | case 14: k4 ^= tail[13] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:190:3: note: here 190 | case 13: k4 ^= tail[12] << 0; | ^~~~ libhashkit/murmur3.cc:191:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 191 | k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; | ~~~^~~~~ libhashkit/murmur3.cc:193:3: note: here 193 | case 12: k3 ^= tail[11] << 24; | ^~~~ libhashkit/murmur3.cc:193:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 193 | case 12: k3 ^= tail[11] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:194:3: note: here 194 | case 11: k3 ^= tail[10] << 16; | ^~~~ libhashkit/murmur3.cc:194:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 194 | case 11: k3 ^= tail[10] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:195:3: note: here 195 | case 10: k3 ^= tail[ 9] << 8; | ^~~~ libhashkit/murmur3.cc:195:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 195 | case 10: k3 ^= tail[ 9] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:196:3: note: here 196 | case 9: k3 ^= tail[ 8] << 0; | ^~~~ libhashkit/murmur3.cc:197:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 197 | k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; | ~~~^~~~~ libhashkit/murmur3.cc:199:3: note: here 199 | case 8: k2 ^= tail[ 7] << 24; | ^~~~ libhashkit/murmur3.cc:199:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 199 | case 8: k2 ^= tail[ 7] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:200:3: note: here 200 | case 7: k2 ^= tail[ 6] << 16; | ^~~~ libhashkit/murmur3.cc:200:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 200 | case 7: k2 ^= tail[ 6] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:201:3: note: here 201 | case 6: k2 ^= tail[ 5] << 8; | ^~~~ libhashkit/murmur3.cc:201:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 201 | case 6: k2 ^= tail[ 5] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:202:3: note: here 202 | case 5: k2 ^= tail[ 4] << 0; | ^~~~ libhashkit/murmur3.cc:203:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 203 | k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:205:3: note: here 205 | case 4: k1 ^= tail[ 3] << 24; | ^~~~ libhashkit/murmur3.cc:205:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 205 | case 4: k1 ^= tail[ 3] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:206:3: note: here 206 | case 3: k1 ^= tail[ 2] << 16; | ^~~~ libhashkit/murmur3.cc:206:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 206 | case 3: k1 ^= tail[ 2] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:207:3: note: here 207 | case 2: k1 ^= tail[ 1] << 8; | ^~~~ libhashkit/murmur3.cc:207:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 207 | case 2: k1 ^= tail[ 1] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:208:3: note: here 208 | case 1: k1 ^= tail[ 0] << 0; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x64_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:278:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | case 15: k2 ^= (uint64_t)(tail[14]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:279:3: note: here 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ^~~~ libhashkit/murmur3.cc:279:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:280:3: note: here 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ^~~~ libhashkit/murmur3.cc:280:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:281:3: note: here 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ^~~~ libhashkit/murmur3.cc:281:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:282:3: note: here 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ^~~~ libhashkit/murmur3.cc:282:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:283:3: note: here 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ^~~~ libhashkit/murmur3.cc:283:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:284:3: note: here 284 | case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; | ^~~~ libhashkit/murmur3.cc:285:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 285 | k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:287:3: note: here 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ^~~~ libhashkit/murmur3.cc:287:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:288:3: note: here 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ^~~~ libhashkit/murmur3.cc:288:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:289:3: note: here 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ^~~~ libhashkit/murmur3.cc:289:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:290:3: note: here 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ^~~~ libhashkit/murmur3.cc:290:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:291:3: note: here 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ^~~~ libhashkit/murmur3.cc:291:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:292:3: note: here 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ^~~~ libhashkit/murmur3.cc:292:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:293:3: note: here 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ^~~~ libhashkit/murmur3.cc:293:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:294:3: note: here 294 | case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; | ^~~~ CXX libhashkit/libmemcached_libmemcached_la-murmur3_api.lo CXX libhashkit/libmemcached_libmemcached_la-one_at_a_time.lo CXX libhashkit/libmemcached_libmemcached_la-rijndael.lo CXX libhashkit/libmemcached_libmemcached_la-str_algorithm.lo CXX libhashkit/libmemcached_libmemcached_la-strerror.lo CXX libhashkit/libmemcached_libmemcached_la-string.lo CXX libhashkit/libmemcached_libmemcached_la-nohsieh.lo CXX libmemcached/libmemcached_libmemcached_la-allocators.lo CXX libmemcached/libmemcached_libmemcached_la-analyze.lo CC libmemcached/libmemcached_libmemcached_la-array.lo CXX libmemcached/libmemcached_libmemcached_la-auto.lo CXX libmemcached/libmemcached_libmemcached_la-backtrace.lo CXX libmemcached/libmemcached_libmemcached_la-behavior.lo libmemcached/behavior.cc: In function ‘memcached_return_t memcached_behavior_set(memcached_st*, memcached_behavior_t, uint64_t)’: libmemcached/behavior.cc:108:32: warning: this statement may fall through [-Wimplicit-fallthrough=] 108 | ptr->flags.auto_eject_hosts= bool(data); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ libmemcached/behavior.cc:110:3: note: here 110 | case MEMCACHED_BEHAVIOR_SERVER_FAILURE_LIMIT: | ^~~~ CXX libmemcached/libmemcached_libmemcached_la-byteorder.lo CXX libmemcached/libmemcached_libmemcached_la-callback.lo CXX libmemcached/libmemcached_libmemcached_la-connect.lo CXX libmemcached/libmemcached_libmemcached_la-delete.lo CXX libmemcached/libmemcached_libmemcached_la-do.lo In function ‘memcached_return_t unix_socket_connect(memcached_instance_st*)’, inlined from ‘memcached_return_t _memcached_connect(memcached_instance_st*, bool)’ at libmemcached/connect.cc:781:28: libmemcached/connect.cc:469:12: warning: ‘char* strncpy(char*, const char*, size_t)’ output may be truncated copying 108 bytes from a string of length 1024 [-Wstringop-truncation] 469 | strncpy(servAddr.sun_path, server->hostname(), sizeof(servAddr.sun_path)); /* Copy filename */ | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX libmemcached/libmemcached_libmemcached_la-dump.lo CXX libmemcached/libmemcached_libmemcached_la-error.lo CXX libmemcached/libmemcached_libmemcached_la-exist.lo CXX libmemcached/libmemcached_libmemcached_la-fetch.lo CXX libmemcached/libmemcached_libmemcached_la-flag.lo CXX libmemcached/libmemcached_libmemcached_la-flush.lo CXX libmemcached/libmemcached_libmemcached_la-flush_buffers.lo CXX libmemcached/libmemcached_libmemcached_la-get.lo CXX libmemcached/libmemcached_libmemcached_la-hash.lo CXX libmemcached/libmemcached_libmemcached_la-hosts.lo CXX libmemcached/libmemcached_libmemcached_la-initialize_query.lo CXX libmemcached/libmemcached_libmemcached_la-io.lo libmemcached/io.cc: In function ‘memcached_return_t io_wait(memcached_instance_st*, short int)’: libmemcached/io.cc:275:26: warning: this statement may fall through [-Wimplicit-fallthrough=] 275 | memcached_set_error(*instance, MEMCACHED_MEMORY_ALLOCATION_FAILURE, MEMCACHED_AT); | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libmemcached/io.cc:277:5: note: here 277 | case EINVAL: | ^~~~ libmemcached/io.cc:278:26: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | memcached_set_error(*instance, MEMCACHED_MEMORY_ALLOCATION_FAILURE, MEMCACHED_AT, memcached_literal_param("RLIMIT_NOFILE exceeded, or if OSX the timeout value was invalid")); | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libmemcached/io.cc:280:5: note: here 280 | default: | ^~~~~~~ CXX libmemcached/libmemcached_libmemcached_la-key.lo CXX libmemcached/libmemcached_libmemcached_la-memcached.lo CXX libmemcached/libmemcached_libmemcached_la-encoding_key.lo CXX libmemcached/libmemcached_libmemcached_la-namespace.lo CXX libmemcached/libmemcached_libmemcached_la-options.lo CXX libmemcached/libmemcached_libmemcached_la-parse.lo CXX libmemcached/libmemcached_libmemcached_la-poll.lo CXX libmemcached/libmemcached_libmemcached_la-purge.lo CXX libmemcached/libmemcached_libmemcached_la-quit.lo CXX libmemcached/libmemcached_libmemcached_la-response.lo CXX libmemcached/libmemcached_libmemcached_la-result.lo CXX libmemcached/libmemcached_libmemcached_la-sasl.lo CXX libmemcached/libmemcached_libmemcached_la-server.lo libmemcached/sasl.cc: In function ‘memcached_return_t memcached_set_sasl_auth_data(memcached_st*, const char*, const char*)’: libmemcached/sasl.cc:365:22: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 365 | callbacks[0].proc= (int (*)())get_username; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:368:22: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 368 | callbacks[1].proc= (int (*)())get_username; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:371:22: warning: cast between incompatible function types from ‘int (*)(sasl_conn_t*, void*, int, sasl_secret_t**)’ {aka ‘int (*)(sasl_conn*, void*, int, sasl_secret**)’} to ‘int (*)()’ [-Wcast-function-type] 371 | callbacks[2].proc= (int (*)())get_password; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc: In function ‘memcached_return_t memcached_clone_sasl(memcached_st*, const memcached_st*)’: libmemcached/sasl.cc:431:42: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 431 | source->sasl.callbacks[0].proc == (int (*)())get_username && | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:433:42: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 433 | source->sasl.callbacks[1].proc == (int (*)())get_username && | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:435:42: warning: cast between incompatible function types from ‘int (*)(sasl_conn_t*, void*, int, sasl_secret_t**)’ {aka ‘int (*)(sasl_conn*, void*, int, sasl_secret**)’} to ‘int (*)()’ [-Wcast-function-type] 435 | source->sasl.callbacks[2].proc == (int (*)())get_password && | ^~~~~~~~~~~~~~~~~~~~~~~ CXX libmemcached/libmemcached_libmemcached_la-server_list.lo CXX libmemcached/libmemcached_libmemcached_la-stats.lo CXX libmemcached/libmemcached_libmemcached_la-storage.lo CXX libmemcached/libmemcached_libmemcached_la-strerror.lo CXX libmemcached/libmemcached_libmemcached_la-string.lo CXX libmemcached/libmemcached_libmemcached_la-touch.lo CXX libmemcached/libmemcached_libmemcached_la-udp.lo CXX libmemcached/libmemcached_libmemcached_la-verbosity.lo CXX libmemcached/libmemcached_libmemcached_la-version.lo CC libmemcached/libmemcached_libmemcached_la-virtual_bucket.lo CXX libmemcached/libmemcached_libmemcachedutil_la-backtrace.lo CXX libhashkit/libhashkit_libhashkitinc_la-aes.lo CXX libhashkit/libhashkit_libhashkitinc_la-algorithm.lo CXX libhashkit/libhashkit_libhashkitinc_la-behavior.lo CXX libhashkit/libhashkit_libhashkitinc_la-crc32.lo CXX libhashkit/libhashkit_libhashkitinc_la-digest.lo CXX libhashkit/libhashkit_libhashkitinc_la-encrypt.lo CXX libhashkit/libhashkit_libhashkitinc_la-fnv_32.lo CXX libhashkit/libhashkit_libhashkitinc_la-fnv_64.lo CXX libhashkit/libhashkit_libhashkitinc_la-function.lo CXX libhashkit/libhashkit_libhashkitinc_la-has.lo CXX libhashkit/libhashkit_libhashkitinc_la-hashkit.lo CXX libhashkit/libhashkit_libhashkitinc_la-jenkins.lo libhashkit/jenkins.cc: In function ‘uint32_t hashkit_jenkins(const char*, size_t, void*)’: libhashkit/jenkins.cc:230:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 230 | case 12: c+=((uint32_t)k[11])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:231:5: note: here 231 | case 11: c+=((uint32_t)k[10])<<16; | ^~~~ libhashkit/jenkins.cc:231:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 231 | case 11: c+=((uint32_t)k[10])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:232:5: note: here 232 | case 10: c+=((uint32_t)k[9])<<8; | ^~~~ libhashkit/jenkins.cc:232:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 232 | case 10: c+=((uint32_t)k[9])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:233:5: note: here 233 | case 9 : c+=k[8]; | ^~~~ libhashkit/jenkins.cc:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 233 | case 9 : c+=k[8]; | ~^~~~~~ libhashkit/jenkins.cc:234:5: note: here 234 | case 8 : b+=((uint32_t)k[7])<<24; | ^~~~ libhashkit/jenkins.cc:234:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 234 | case 8 : b+=((uint32_t)k[7])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:235:5: note: here 235 | case 7 : b+=((uint32_t)k[6])<<16; | ^~~~ libhashkit/jenkins.cc:235:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 235 | case 7 : b+=((uint32_t)k[6])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:236:5: note: here 236 | case 6 : b+=((uint32_t)k[5])<<8; | ^~~~ libhashkit/jenkins.cc:236:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 236 | case 6 : b+=((uint32_t)k[5])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:237:5: note: here 237 | case 5 : b+=k[4]; | ^~~~ libhashkit/jenkins.cc:237:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 237 | case 5 : b+=k[4]; | ~^~~~~~ libhashkit/jenkins.cc:238:5: note: here 238 | case 4 : a+=((uint32_t)k[3])<<24; | ^~~~ libhashkit/jenkins.cc:238:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 238 | case 4 : a+=((uint32_t)k[3])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:239:5: note: here 239 | case 3 : a+=((uint32_t)k[2])<<16; | ^~~~ libhashkit/jenkins.cc:239:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 239 | case 3 : a+=((uint32_t)k[2])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:240:5: note: here 240 | case 2 : a+=((uint32_t)k[1])<<8; | ^~~~ libhashkit/jenkins.cc:240:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 240 | case 2 : a+=((uint32_t)k[1])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:241:5: note: here 241 | case 1 : a+=k[0]; | ^~~~ CXX libhashkit/libhashkit_libhashkitinc_la-ketama.lo CXX libhashkit/libhashkit_libhashkitinc_la-md5.lo CXX libhashkit/libhashkit_libhashkitinc_la-murmur.lo CXX libhashkit/libhashkit_libhashkitinc_la-murmur3.lo libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_32(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:112:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 112 | case 3: k1 ^= tail[2] << 16; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:113:3: note: here 113 | case 2: k1 ^= tail[1] << 8; | ^~~~ libhashkit/murmur3.cc:113:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 113 | case 2: k1 ^= tail[1] << 8; | ~~~^~~~~~~~~~~~~~~ libhashkit/murmur3.cc:114:3: note: here 114 | case 1: k1 ^= tail[0]; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:188:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 188 | case 15: k4 ^= tail[14] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:189:3: note: here 189 | case 14: k4 ^= tail[13] << 8; | ^~~~ libhashkit/murmur3.cc:189:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 189 | case 14: k4 ^= tail[13] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:190:3: note: here 190 | case 13: k4 ^= tail[12] << 0; | ^~~~ libhashkit/murmur3.cc:191:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 191 | k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; | ~~~^~~~~ libhashkit/murmur3.cc:193:3: note: here 193 | case 12: k3 ^= tail[11] << 24; | ^~~~ libhashkit/murmur3.cc:193:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 193 | case 12: k3 ^= tail[11] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:194:3: note: here 194 | case 11: k3 ^= tail[10] << 16; | ^~~~ libhashkit/murmur3.cc:194:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 194 | case 11: k3 ^= tail[10] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:195:3: note: here 195 | case 10: k3 ^= tail[ 9] << 8; | ^~~~ libhashkit/murmur3.cc:195:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 195 | case 10: k3 ^= tail[ 9] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:196:3: note: here 196 | case 9: k3 ^= tail[ 8] << 0; | ^~~~ libhashkit/murmur3.cc:197:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 197 | k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; | ~~~^~~~~ libhashkit/murmur3.cc:199:3: note: here 199 | case 8: k2 ^= tail[ 7] << 24; | ^~~~ libhashkit/murmur3.cc:199:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 199 | case 8: k2 ^= tail[ 7] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:200:3: note: here 200 | case 7: k2 ^= tail[ 6] << 16; | ^~~~ libhashkit/murmur3.cc:200:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 200 | case 7: k2 ^= tail[ 6] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:201:3: note: here 201 | case 6: k2 ^= tail[ 5] << 8; | ^~~~ libhashkit/murmur3.cc:201:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 201 | case 6: k2 ^= tail[ 5] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:202:3: note: here 202 | case 5: k2 ^= tail[ 4] << 0; | ^~~~ libhashkit/murmur3.cc:203:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 203 | k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:205:3: note: here 205 | case 4: k1 ^= tail[ 3] << 24; | ^~~~ libhashkit/murmur3.cc:205:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 205 | case 4: k1 ^= tail[ 3] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:206:3: note: here 206 | case 3: k1 ^= tail[ 2] << 16; | ^~~~ libhashkit/murmur3.cc:206:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 206 | case 3: k1 ^= tail[ 2] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:207:3: note: here 207 | case 2: k1 ^= tail[ 1] << 8; | ^~~~ libhashkit/murmur3.cc:207:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 207 | case 2: k1 ^= tail[ 1] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:208:3: note: here 208 | case 1: k1 ^= tail[ 0] << 0; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x64_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:278:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | case 15: k2 ^= (uint64_t)(tail[14]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:279:3: note: here 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ^~~~ libhashkit/murmur3.cc:279:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:280:3: note: here 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ^~~~ libhashkit/murmur3.cc:280:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:281:3: note: here 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ^~~~ libhashkit/murmur3.cc:281:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:282:3: note: here 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ^~~~ libhashkit/murmur3.cc:282:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:283:3: note: here 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ^~~~ libhashkit/murmur3.cc:283:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:284:3: note: here 284 | case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; | ^~~~ libhashkit/murmur3.cc:285:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 285 | k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:287:3: note: here 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ^~~~ libhashkit/murmur3.cc:287:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:288:3: note: here 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ^~~~ libhashkit/murmur3.cc:288:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:289:3: note: here 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ^~~~ libhashkit/murmur3.cc:289:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:290:3: note: here 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ^~~~ libhashkit/murmur3.cc:290:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:291:3: note: here 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ^~~~ libhashkit/murmur3.cc:291:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:292:3: note: here 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ^~~~ libhashkit/murmur3.cc:292:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:293:3: note: here 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ^~~~ libhashkit/murmur3.cc:293:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:294:3: note: here 294 | case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; | ^~~~ libhashkit/murmur.cc: In function ‘uint32_t hashkit_murmur(const char*, size_t, void*)’: libhashkit/murmur.cc:99:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 99 | case 3: h ^= ((uint32_t)data[2]) << 16; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:100:3: note: here 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ^~~~ libhashkit/murmur.cc:100:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:101:3: note: here 101 | case 1: h ^= data[0]; | ^~~~ CXX libhashkit/libhashkit_libhashkitinc_la-murmur3_api.lo CXX libhashkit/libhashkit_libhashkitinc_la-one_at_a_time.lo CXX libhashkit/libhashkit_libhashkitinc_la-rijndael.lo CXX libhashkit/libhashkit_libhashkitinc_la-str_algorithm.lo CXX libhashkit/libhashkit_libhashkitinc_la-strerror.lo CXX libhashkit/libhashkit_libhashkitinc_la-string.lo CXX libhashkit/libhashkit_libhashkitinc_la-nohsieh.lo CXX libmemcached/csl/libmemcachedinternal_libmemcachedinternal_la-context.lo CXX libmemcached/csl/libmemcachedinternal_libmemcachedinternal_la-parser.lo CXX libmemcached/csl/libmemcachedinternal_libmemcachedinternal_la-scanner.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-instance.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-aes.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-algorithm.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-behavior.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-crc32.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-digest.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-encrypt.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-fnv_32.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-fnv_64.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-function.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-has.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-hashkit.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-jenkins.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-ketama.lo libhashkit/jenkins.cc: In function ‘uint32_t hashkit_jenkins(const char*, size_t, void*)’: libhashkit/jenkins.cc:230:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 230 | case 12: c+=((uint32_t)k[11])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:231:5: note: here 231 | case 11: c+=((uint32_t)k[10])<<16; | ^~~~ libhashkit/jenkins.cc:231:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 231 | case 11: c+=((uint32_t)k[10])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:232:5: note: here 232 | case 10: c+=((uint32_t)k[9])<<8; | ^~~~ libhashkit/jenkins.cc:232:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 232 | case 10: c+=((uint32_t)k[9])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:233:5: note: here 233 | case 9 : c+=k[8]; | ^~~~ libhashkit/jenkins.cc:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 233 | case 9 : c+=k[8]; | ~^~~~~~ libhashkit/jenkins.cc:234:5: note: here 234 | case 8 : b+=((uint32_t)k[7])<<24; | ^~~~ libhashkit/jenkins.cc:234:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 234 | case 8 : b+=((uint32_t)k[7])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:235:5: note: here 235 | case 7 : b+=((uint32_t)k[6])<<16; | ^~~~ libhashkit/jenkins.cc:235:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 235 | case 7 : b+=((uint32_t)k[6])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:236:5: note: here 236 | case 6 : b+=((uint32_t)k[5])<<8; | ^~~~ libhashkit/jenkins.cc:236:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 236 | case 6 : b+=((uint32_t)k[5])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:237:5: note: here 237 | case 5 : b+=k[4]; | ^~~~ libhashkit/jenkins.cc:237:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 237 | case 5 : b+=k[4]; | ~^~~~~~ libhashkit/jenkins.cc:238:5: note: here 238 | case 4 : a+=((uint32_t)k[3])<<24; | ^~~~ libhashkit/jenkins.cc:238:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 238 | case 4 : a+=((uint32_t)k[3])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:239:5: note: here 239 | case 3 : a+=((uint32_t)k[2])<<16; | ^~~~ libhashkit/jenkins.cc:239:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 239 | case 3 : a+=((uint32_t)k[2])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:240:5: note: here 240 | case 2 : a+=((uint32_t)k[1])<<8; | ^~~~ libhashkit/jenkins.cc:240:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 240 | case 2 : a+=((uint32_t)k[1])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:241:5: note: here 241 | case 1 : a+=k[0]; | ^~~~ CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-md5.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-murmur.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-murmur3.lo libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_32(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:112:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 112 | case 3: k1 ^= tail[2] << 16; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:113:3: note: here 113 | case 2: k1 ^= tail[1] << 8; | ^~~~ libhashkit/murmur3.cc:113:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 113 | case 2: k1 ^= tail[1] << 8; | ~~~^~~~~~~~~~~~~~~ libhashkit/murmur3.cc:114:3: note: here 114 | case 1: k1 ^= tail[0]; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:188:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 188 | case 15: k4 ^= tail[14] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:189:3: note: here 189 | case 14: k4 ^= tail[13] << 8; | ^~~~ libhashkit/murmur3.cc:189:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 189 | case 14: k4 ^= tail[13] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:190:3: note: here 190 | case 13: k4 ^= tail[12] << 0; | ^~~~ libhashkit/murmur3.cc:191:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 191 | k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; | ~~~^~~~~ libhashkit/murmur3.cc:193:3: note: here 193 | case 12: k3 ^= tail[11] << 24; | ^~~~ libhashkit/murmur3.cc:193:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 193 | case 12: k3 ^= tail[11] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:194:3: note: here 194 | case 11: k3 ^= tail[10] << 16; | ^~~~ libhashkit/murmur3.cc:194:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 194 | case 11: k3 ^= tail[10] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:195:3: note: here 195 | case 10: k3 ^= tail[ 9] << 8; | ^~~~ libhashkit/murmur3.cc:195:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 195 | case 10: k3 ^= tail[ 9] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:196:3: note: here 196 | case 9: k3 ^= tail[ 8] << 0; | ^~~~ libhashkit/murmur3.cc:197:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 197 | k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; | ~~~^~~~~ libhashkit/murmur3.cc:199:3: note: here 199 | case 8: k2 ^= tail[ 7] << 24; | ^~~~ libhashkit/murmur3.cc:199:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 199 | case 8: k2 ^= tail[ 7] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:200:3: note: here 200 | case 7: k2 ^= tail[ 6] << 16; | ^~~~ libhashkit/murmur3.cc:200:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 200 | case 7: k2 ^= tail[ 6] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:201:3: note: here 201 | case 6: k2 ^= tail[ 5] << 8; | ^~~~ libhashkit/murmur3.cc:201:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 201 | case 6: k2 ^= tail[ 5] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:202:3: note: here 202 | case 5: k2 ^= tail[ 4] << 0; | ^~~~ libhashkit/murmur3.cc:203:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 203 | k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:205:3: note: here 205 | case 4: k1 ^= tail[ 3] << 24; | ^~~~ libhashkit/murmur3.cc:205:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 205 | case 4: k1 ^= tail[ 3] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:206:3: note: here 206 | case 3: k1 ^= tail[ 2] << 16; | ^~~~ libhashkit/murmur3.cc:206:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 206 | case 3: k1 ^= tail[ 2] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:207:3: note: here 207 | case 2: k1 ^= tail[ 1] << 8; | ^~~~ libhashkit/murmur3.cc:207:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 207 | case 2: k1 ^= tail[ 1] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:208:3: note: here 208 | case 1: k1 ^= tail[ 0] << 0; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x64_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:278:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | case 15: k2 ^= (uint64_t)(tail[14]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:279:3: note: here 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ^~~~ libhashkit/murmur3.cc:279:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:280:3: note: here 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ^~~~ libhashkit/murmur3.cc:280:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:281:3: note: here 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ^~~~ libhashkit/murmur3.cc:281:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:282:3: note: here 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ^~~~ libhashkit/murmur3.cc:282:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:283:3: note: here 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ^~~~ libhashkit/murmur3.cc:283:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:284:3: note: here 284 | case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; | ^~~~ libhashkit/murmur3.cc:285:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 285 | k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:287:3: note: here 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ^~~~ libhashkit/murmur3.cc:287:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:288:3: note: here 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ^~~~ libhashkit/murmur3.cc:288:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:289:3: note: here 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ^~~~ libhashkit/murmur3.cc:289:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:290:3: note: here 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ^~~~ libhashkit/murmur3.cc:290:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:291:3: note: here 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ^~~~ libhashkit/murmur3.cc:291:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:292:3: note: here 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ^~~~ libhashkit/murmur3.cc:292:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:293:3: note: here 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ^~~~ libhashkit/murmur3.cc:293:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:294:3: note: here 294 | case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; | ^~~~ libhashkit/murmur.cc: In function ‘uint32_t hashkit_murmur(const char*, size_t, void*)’: libhashkit/murmur.cc:99:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 99 | case 3: h ^= ((uint32_t)data[2]) << 16; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:100:3: note: here 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ^~~~ libhashkit/murmur.cc:100:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:101:3: note: here 101 | case 1: h ^= data[0]; | ^~~~ CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-murmur3_api.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-one_at_a_time.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-rijndael.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-str_algorithm.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-strerror.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-string.lo CXX libhashkit/libmemcachedinternal_libmemcachedinternal_la-nohsieh.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-allocators.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-analyze.lo CC libmemcached/libmemcachedinternal_libmemcachedinternal_la-array.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-auto.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-backtrace.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-behavior.lo libmemcached/behavior.cc: In function ‘memcached_return_t memcached_behavior_set(memcached_st*, memcached_behavior_t, uint64_t)’: libmemcached/behavior.cc:108:32: warning: this statement may fall through [-Wimplicit-fallthrough=] 108 | ptr->flags.auto_eject_hosts= bool(data); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ libmemcached/behavior.cc:110:3: note: here 110 | case MEMCACHED_BEHAVIOR_SERVER_FAILURE_LIMIT: | ^~~~ CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-byteorder.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-callback.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-connect.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-delete.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-do.lo In function ‘memcached_return_t unix_socket_connect(memcached_instance_st*)’, inlined from ‘memcached_return_t _memcached_connect(memcached_instance_st*, bool)’ at libmemcached/connect.cc:781:28: libmemcached/connect.cc:469:12: warning: ‘char* strncpy(char*, const char*, size_t)’ output may be truncated copying 108 bytes from a string of length 1024 [-Wstringop-truncation] 469 | strncpy(servAddr.sun_path, server->hostname(), sizeof(servAddr.sun_path)); /* Copy filename */ | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-dump.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-error.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-exist.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-fetch.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-flag.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-flush.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-flush_buffers.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-get.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-hash.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-hosts.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-initialize_query.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-io.lo libmemcached/io.cc: In function ‘memcached_return_t io_wait(memcached_instance_st*, short int)’: libmemcached/io.cc:275:26: warning: this statement may fall through [-Wimplicit-fallthrough=] 275 | memcached_set_error(*instance, MEMCACHED_MEMORY_ALLOCATION_FAILURE, MEMCACHED_AT); | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libmemcached/io.cc:277:5: note: here 277 | case EINVAL: | ^~~~ libmemcached/io.cc:278:26: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | memcached_set_error(*instance, MEMCACHED_MEMORY_ALLOCATION_FAILURE, MEMCACHED_AT, memcached_literal_param("RLIMIT_NOFILE exceeded, or if OSX the timeout value was invalid")); | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libmemcached/io.cc:280:5: note: here 280 | default: | ^~~~~~~ CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-key.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-memcached.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-encoding_key.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-namespace.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-options.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-parse.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-poll.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-purge.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-quit.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-response.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-result.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-sasl.lo libmemcached/sasl.cc: In function ‘memcached_return_t memcached_set_sasl_auth_data(memcached_st*, const char*, const char*)’: libmemcached/sasl.cc:365:22: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 365 | callbacks[0].proc= (int (*)())get_username; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:368:22: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 368 | callbacks[1].proc= (int (*)())get_username; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:371:22: warning: cast between incompatible function types from ‘int (*)(sasl_conn_t*, void*, int, sasl_secret_t**)’ {aka ‘int (*)(sasl_conn*, void*, int, sasl_secret**)’} to ‘int (*)()’ [-Wcast-function-type] 371 | callbacks[2].proc= (int (*)())get_password; | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc: In function ‘memcached_return_t memcached_clone_sasl(memcached_st*, const memcached_st*)’: libmemcached/sasl.cc:431:42: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 431 | source->sasl.callbacks[0].proc == (int (*)())get_username && | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:433:42: warning: cast between incompatible function types from ‘int (*)(void*, int, const char**, unsigned int*)’ to ‘int (*)()’ [-Wcast-function-type] 433 | source->sasl.callbacks[1].proc == (int (*)())get_username && | ^~~~~~~~~~~~~~~~~~~~~~~ libmemcached/sasl.cc:435:42: warning: cast between incompatible function types from ‘int (*)(sasl_conn_t*, void*, int, sasl_secret_t**)’ {aka ‘int (*)(sasl_conn*, void*, int, sasl_secret**)’} to ‘int (*)()’ [-Wcast-function-type] 435 | source->sasl.callbacks[2].proc == (int (*)())get_password && | ^~~~~~~~~~~~~~~~~~~~~~~ CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-server.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-server_list.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-stats.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-storage.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-strerror.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-string.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-touch.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-udp.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-verbosity.lo CXX libmemcached/libmemcachedinternal_libmemcachedinternal_la-version.lo CC libmemcached/libmemcachedinternal_libmemcachedinternal_la-virtual_bucket.lo CXX libmemcached/libmemcachedinternal_libmemcachedutilinternal_la-backtrace.lo CXX libmemcachedutil/libmemcachedinternal_libmemcachedutilinternal_la-flush.lo CXX libmemcachedutil/libmemcachedinternal_libmemcachedutilinternal_la-pid.lo CXX libmemcachedutil/libmemcachedinternal_libmemcachedutilinternal_la-ping.lo CXX libmemcachedutil/libmemcachedinternal_libmemcachedutilinternal_la-pool.lo CXX libmemcachedutil/libmemcachedinternal_libmemcachedutilinternal_la-version.lo CXX clients/clients_memcapable-memcapable.o CXX libmemcached/clients_memcapable-byteorder.o CXX clients/memcat.o CXX clients/memcp.o CXX clients/memdump.o CXX clients/memerror.o CXX clients/memexist.o CXX clients/memtouch.o CXX clients/memflush.o clients/memflush.cc: In function ‘int main(int, char**)’: clients/memflush.cc:42:19: error: ISO C++ forbids comparison between pointer and integer [-fpermissive] 42 | if (opt_servers == false) | ~~~~~~~~~~~~^~~~~~~~ clients/memflush.cc:51:21: error: ISO C++ forbids comparison between pointer and integer [-fpermissive] 51 | if (opt_servers == false) | ~~~~~~~~~~~~^~~~~~~~ make[1]: *** [Makefile:5832: clients/memflush.o] Error 1 make[1]: *** Waiting for unfinished jobs.... clients/memcapable.cc: In function ‘int main(int, char**)’: clients/memcapable.cc:2234:48: warning: ‘%s’ directive argument is null [-Wformat-overflow=] 2234 | fprintf(stderr, "Failed to connect to <%s:%s>: %s\n", hostname, port, strerror(get_socket_errno())); | ^~ clients/memcapable.cc:2161:44: warning: ‘%s’ directive argument is null [-Wformat-overflow=] 2161 | fprintf(stderr, "Failed to connect to <%s:%s>: %s\n", | ^~ make[1]: Leaving directory '/svr-setup/libmemcached-1.0.18' make: *** [Makefile:3700: all] Error 2 real 0m24.312s user 0m36.403s sys 0m11.235s make -j3 install-am make[1]: Entering directory '/svr-setup/libmemcached-1.0.18' CXX libhashkit/libhashkit_libhashkit_la-aes.lo CXX libhashkit/libhashkit_libhashkit_la-algorithm.lo CXX libhashkit/libhashkit_libhashkit_la-behavior.lo CXX libhashkit/libhashkit_libhashkit_la-crc32.lo CXX libhashkit/libhashkit_libhashkit_la-digest.lo CXX libhashkit/libhashkit_libhashkit_la-encrypt.lo CXX libhashkit/libhashkit_libhashkit_la-fnv_32.lo CXX libhashkit/libhashkit_libhashkit_la-fnv_64.lo CXX libhashkit/libhashkit_libhashkit_la-function.lo CXX libhashkit/libhashkit_libhashkit_la-has.lo CXX libhashkit/libhashkit_libhashkit_la-hashkit.lo CXX libhashkit/libhashkit_libhashkit_la-jenkins.lo CXX libhashkit/libhashkit_libhashkit_la-ketama.lo libhashkit/jenkins.cc: In function ‘uint32_t hashkit_jenkins(const char*, size_t, void*)’: libhashkit/jenkins.cc:230:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 230 | case 12: c+=((uint32_t)k[11])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:231:5: note: here 231 | case 11: c+=((uint32_t)k[10])<<16; | ^~~~ libhashkit/jenkins.cc:231:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 231 | case 11: c+=((uint32_t)k[10])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:232:5: note: here 232 | case 10: c+=((uint32_t)k[9])<<8; | ^~~~ libhashkit/jenkins.cc:232:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 232 | case 10: c+=((uint32_t)k[9])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:233:5: note: here 233 | case 9 : c+=k[8]; | ^~~~ libhashkit/jenkins.cc:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 233 | case 9 : c+=k[8]; | ~^~~~~~ libhashkit/jenkins.cc:234:5: note: here 234 | case 8 : b+=((uint32_t)k[7])<<24; | ^~~~ libhashkit/jenkins.cc:234:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 234 | case 8 : b+=((uint32_t)k[7])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:235:5: note: here 235 | case 7 : b+=((uint32_t)k[6])<<16; | ^~~~ libhashkit/jenkins.cc:235:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 235 | case 7 : b+=((uint32_t)k[6])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:236:5: note: here 236 | case 6 : b+=((uint32_t)k[5])<<8; | ^~~~ libhashkit/jenkins.cc:236:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 236 | case 6 : b+=((uint32_t)k[5])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:237:5: note: here 237 | case 5 : b+=k[4]; | ^~~~ libhashkit/jenkins.cc:237:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 237 | case 5 : b+=k[4]; | ~^~~~~~ libhashkit/jenkins.cc:238:5: note: here 238 | case 4 : a+=((uint32_t)k[3])<<24; | ^~~~ libhashkit/jenkins.cc:238:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 238 | case 4 : a+=((uint32_t)k[3])<<24; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:239:5: note: here 239 | case 3 : a+=((uint32_t)k[2])<<16; | ^~~~ libhashkit/jenkins.cc:239:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 239 | case 3 : a+=((uint32_t)k[2])<<16; | ~^~~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:240:5: note: here 240 | case 2 : a+=((uint32_t)k[1])<<8; | ^~~~ libhashkit/jenkins.cc:240:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 240 | case 2 : a+=((uint32_t)k[1])<<8; | ~^~~~~~~~~~~~~~~~~~~~~ libhashkit/jenkins.cc:241:5: note: here 241 | case 1 : a+=k[0]; | ^~~~ CXX libhashkit/libhashkit_libhashkit_la-md5.lo CXX libhashkit/libhashkit_libhashkit_la-murmur.lo CXX libhashkit/libhashkit_libhashkit_la-murmur3.lo libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_32(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:112:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 112 | case 3: k1 ^= tail[2] << 16; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:113:3: note: here 113 | case 2: k1 ^= tail[1] << 8; | ^~~~ libhashkit/murmur3.cc:113:14: warning: this statement may fall through [-Wimplicit-fallthrough=] 113 | case 2: k1 ^= tail[1] << 8; | ~~~^~~~~~~~~~~~~~~ libhashkit/murmur3.cc:114:3: note: here 114 | case 1: k1 ^= tail[0]; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x86_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:188:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 188 | case 15: k4 ^= tail[14] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:189:3: note: here 189 | case 14: k4 ^= tail[13] << 8; | ^~~~ libhashkit/murmur3.cc:189:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 189 | case 14: k4 ^= tail[13] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:190:3: note: here 190 | case 13: k4 ^= tail[12] << 0; | ^~~~ libhashkit/murmur3.cc:191:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 191 | k4 *= c4; k4 = ROTL32(k4,18); k4 *= c1; h4 ^= k4; | ~~~^~~~~ libhashkit/murmur3.cc:193:3: note: here 193 | case 12: k3 ^= tail[11] << 24; | ^~~~ libhashkit/murmur3.cc:193:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 193 | case 12: k3 ^= tail[11] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:194:3: note: here 194 | case 11: k3 ^= tail[10] << 16; | ^~~~ libhashkit/murmur3.cc:194:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 194 | case 11: k3 ^= tail[10] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:195:3: note: here 195 | case 10: k3 ^= tail[ 9] << 8; | ^~~~ libhashkit/murmur3.cc:195:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 195 | case 10: k3 ^= tail[ 9] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:196:3: note: here 196 | case 9: k3 ^= tail[ 8] << 0; | ^~~~ libhashkit/murmur3.cc:197:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 197 | k3 *= c3; k3 = ROTL32(k3,17); k3 *= c4; h3 ^= k3; | ~~~^~~~~ libhashkit/murmur3.cc:199:3: note: here 199 | case 8: k2 ^= tail[ 7] << 24; | ^~~~ libhashkit/murmur3.cc:199:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 199 | case 8: k2 ^= tail[ 7] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:200:3: note: here 200 | case 7: k2 ^= tail[ 6] << 16; | ^~~~ libhashkit/murmur3.cc:200:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 200 | case 7: k2 ^= tail[ 6] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:201:3: note: here 201 | case 6: k2 ^= tail[ 5] << 8; | ^~~~ libhashkit/murmur3.cc:201:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 201 | case 6: k2 ^= tail[ 5] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:202:3: note: here 202 | case 5: k2 ^= tail[ 4] << 0; | ^~~~ libhashkit/murmur3.cc:203:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 203 | k2 *= c2; k2 = ROTL32(k2,16); k2 *= c3; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:205:3: note: here 205 | case 4: k1 ^= tail[ 3] << 24; | ^~~~ libhashkit/murmur3.cc:205:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 205 | case 4: k1 ^= tail[ 3] << 24; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:206:3: note: here 206 | case 3: k1 ^= tail[ 2] << 16; | ^~~~ libhashkit/murmur3.cc:206:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 206 | case 3: k1 ^= tail[ 2] << 16; | ~~~^~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:207:3: note: here 207 | case 2: k1 ^= tail[ 1] << 8; | ^~~~ libhashkit/murmur3.cc:207:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 207 | case 2: k1 ^= tail[ 1] << 8; | ~~~^~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:208:3: note: here 208 | case 1: k1 ^= tail[ 0] << 0; | ^~~~ libhashkit/murmur3.cc: In function ‘void MurmurHash3_x64_128(const void*, int, uint32_t, void*)’: libhashkit/murmur3.cc:278:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 278 | case 15: k2 ^= (uint64_t)(tail[14]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:279:3: note: here 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ^~~~ libhashkit/murmur3.cc:279:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 279 | case 14: k2 ^= (uint64_t)(tail[13]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:280:3: note: here 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ^~~~ libhashkit/murmur3.cc:280:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 280 | case 13: k2 ^= (uint64_t)(tail[12]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:281:3: note: here 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ^~~~ libhashkit/murmur3.cc:281:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 281 | case 12: k2 ^= (uint64_t)(tail[11]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:282:3: note: here 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ^~~~ libhashkit/murmur3.cc:282:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 282 | case 11: k2 ^= (uint64_t)(tail[10]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:283:3: note: here 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ^~~~ libhashkit/murmur3.cc:283:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 283 | case 10: k2 ^= (uint64_t)(tail[ 9]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:284:3: note: here 284 | case 9: k2 ^= (uint64_t)(tail[ 8]) << 0; | ^~~~ libhashkit/murmur3.cc:285:56: warning: this statement may fall through [-Wimplicit-fallthrough=] 285 | k2 *= c2; k2 = ROTL64(k2,33); k2 *= c1; h2 ^= k2; | ~~~^~~~~ libhashkit/murmur3.cc:287:3: note: here 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ^~~~ libhashkit/murmur3.cc:287:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 287 | case 8: k1 ^= (uint64_t)(tail[ 7]) << 56; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:288:3: note: here 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ^~~~ libhashkit/murmur3.cc:288:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 288 | case 7: k1 ^= (uint64_t)(tail[ 6]) << 48; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:289:3: note: here 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ^~~~ libhashkit/murmur3.cc:289:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 289 | case 6: k1 ^= (uint64_t)(tail[ 5]) << 40; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:290:3: note: here 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ^~~~ libhashkit/murmur3.cc:290:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 290 | case 5: k1 ^= (uint64_t)(tail[ 4]) << 32; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:291:3: note: here 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ^~~~ libhashkit/murmur3.cc:291:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 291 | case 4: k1 ^= (uint64_t)(tail[ 3]) << 24; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:292:3: note: here 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ^~~~ libhashkit/murmur3.cc:292:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 292 | case 3: k1 ^= (uint64_t)(tail[ 2]) << 16; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:293:3: note: here 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ^~~~ libhashkit/murmur3.cc:293:15: warning: this statement may fall through [-Wimplicit-fallthrough=] 293 | case 2: k1 ^= (uint64_t)(tail[ 1]) << 8; | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur3.cc:294:3: note: here 294 | case 1: k1 ^= (uint64_t)(tail[ 0]) << 0; | ^~~~ libhashkit/murmur.cc: In function ‘uint32_t hashkit_murmur(const char*, size_t, void*)’: libhashkit/murmur.cc:99:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 99 | case 3: h ^= ((uint32_t)data[2]) << 16; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:100:3: note: here 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ^~~~ libhashkit/murmur.cc:100:13: warning: this statement may fall through [-Wimplicit-fallthrough=] 100 | case 2: h ^= ((uint32_t)data[1]) << 8; | ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ libhashkit/murmur.cc:101:3: note: here 101 | case 1: h ^= data[0]; | ^~~~ CXX libhashkit/libhashkit_libhashkit_la-murmur3_api.lo CXX libhashkit/libhashkit_libhashkit_la-one_at_a_time.lo CXX libhashkit/libhashkit_libhashkit_la-rijndael.lo CXX libhashkit/libhashkit_libhashkit_la-str_algorithm.lo CXX libhashkit/libhashkit_libhashkit_la-strerror.lo CXX libhashkit/libhashkit_libhashkit_la-string.lo CXX libhashkit/libhashkit_libhashkit_la-nohsieh.lo CXX libmemcached/csl/libmemcached_libmemcached_la-context.lo CXX libmemcached/csl/libmemcached_libmemcached_la-parser.lo CXX libmemcached/csl/libmemcached_libmemcached_la-scanner.lo CXX libmemcached/libmemcached_libmemcached_la-instance.lo CXX libmemcachedutil/libmemcached_libmemcachedutil_la-flush.lo CXX libmemcachedutil/libmemcached_libmemcachedutil_la-pid.lo CXX libmemcachedutil/libmemcached_libmemcachedutil_la-ping.lo CXX libmemcachedutil/libmemcached_libmemcachedutil_la-pool.lo CXX libmemcachedutil/libmemcached_libmemcachedutil_la-version.lo CXXLD libhashkit/libhashkitinc.la CXX clients/utilities.lo CXXLD libmemcachedinternal/libmemcachedinternal.la CXX clients/memflush.o copying selected object files to avoid basename conflicts... CXX clients/memparse.o CXX clients/memping.o clients/memflush.cc: In function ‘int main(int, char**)’: clients/memflush.cc:42:19: error: ISO C++ forbids comparison between pointer and integer [-fpermissive] 42 | if (opt_servers == false) | ~~~~~~~~~~~~^~~~~~~~ clients/memflush.cc:51:21: error: ISO C++ forbids comparison between pointer and integer [-fpermissive] 51 | if (opt_servers == false) | ~~~~~~~~~~~~^~~~~~~~ make[1]: *** [Makefile:5832: clients/memflush.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/svr-setup/libmemcached-1.0.18' make: *** [Makefile:9973: install] Error 2 real 0m5.060s user 0m7.666s sys 0m2.182s libmemcached installed (BCompiling PHP memcached-2.2.0 extension... (B/svr-setup/libmemcached-1.0.18 cd /svr-setup /usr/local/src/centminmod/inc/memcached_install.inc: line 466: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 compiling memcached PHP extension 2.2.0 ... /usr/local/src/centminmod/inc/memcached_install.inc: line 531: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/memcached_install.inc: line 537: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. memcached PHP extension installed (Bcheck /etc/centminmod/php.d/memcache.ini grep: /etc/centminmod/php.d/memcache.ini: No such file or directory cat: /usr/local/bin/php-config: No such file or directory check /etc/centminmod/php.d/memcached.ini grep: /etc/centminmod/php.d/memcached.ini: No such file or directory cat: /usr/local/bin/php-config: No such file or directory Redirecting to /bin/systemctl stop memcached.service Failed to stop memcached.service: Unit memcached.service not loaded. Redirecting to /bin/systemctl start memcached.service Failed to start memcached.service: Unit memcached.service not found. Redirecting to /bin/systemctl restart php-fpm.service Failed to restart php-fpm.service: Unit php-fpm.service not found. -- No entries -- memcached -V memcached 1.6.36 php --ri memcache /usr/local/src/centminmod/inc/memcached_install.inc: line 641: php: command not found php --ri memcached /usr/local/src/centminmod/inc/memcached_install.inc: line 644: php: command not found memcache/memcached routines completed (BRedirecting to /bin/systemctl start memcached.service Failed to start memcached.service: Unit memcached.service not found. ************************************************* * memcached installed (B************************************************* csfinstalls ************************************************* * Installing CSF firewall... (B************************************************* Installing... Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:02:08 ago on Sun 05 Oct 2025 06:05:20 PM UTC. Package perl-libwww-perl-6.76-3.el10.noarch is already installed. No match for argument: perl-Crypt-SSLeay Package perl-Net-SSLeay-1.94-7.el10.x86_64 is already installed. Error: Unable to find a match: perl-Crypt-SSLeay Selecting installer... Running csf generic installer Installing generic csf and lfd Check we're running as root mkdir: created directory '/etc/csf' 'install.txt' -> '/etc/csf/install.txt' Checking Perl modules... Configuration modified to use iptables-nft Configuration modified to use ip6tables-nft cannot access /var/lib/alternatives/ip6tables: No such file or directory Using configuration defaults ...Perl modules OK mkdir: cannot create directory ‘/etc/csf’: File exists mkdir: created directory '/var/lib/csf' mkdir: created directory '/var/lib/csf/backup' mkdir: created directory '/var/lib/csf/Geo' mkdir: created directory '/var/lib/csf/ui' mkdir: created directory '/var/lib/csf/stats' mkdir: created directory '/var/lib/csf/lock' mkdir: created directory '/var/lib/csf/webmin' mkdir: created directory '/var/lib/csf/zone' mkdir: created directory '/usr/local/csf' mkdir: created directory '/usr/local/csf/bin' mkdir: created directory '/usr/local/csf/lib' mkdir: created directory '/usr/local/csf/tpl' 'csf.generic.conf' -> '/etc/csf/csf.conf' 'csf.generic.allow' -> '/etc/csf/csf.allow' 'csf.deny' -> '/etc/csf/./csf.deny' 'csf.redirect' -> '/etc/csf/./csf.redirect' 'csf.resellers' -> '/etc/csf/./csf.resellers' 'csf.dirwatch' -> '/etc/csf/./csf.dirwatch' 'csf.syslogs' -> '/etc/csf/./csf.syslogs' 'csf.logfiles' -> '/etc/csf/./csf.logfiles' 'csf.logignore' -> '/etc/csf/./csf.logignore' 'csf.blocklists' -> '/etc/csf/./csf.blocklists' 'csf.generic.ignore' -> '/etc/csf/csf.ignore' 'csf.generic.pignore' -> '/etc/csf/csf.pignore' 'csf.rignore' -> '/etc/csf/./csf.rignore' 'csf.fignore' -> '/etc/csf/./csf.fignore' 'csf.signore' -> '/etc/csf/./csf.signore' 'csf.suignore' -> '/etc/csf/./csf.suignore' 'csf.uidignore' -> '/etc/csf/./csf.uidignore' 'csf.mignore' -> '/etc/csf/./csf.mignore' 'csf.sips' -> '/etc/csf/./csf.sips' 'csf.dyndns' -> '/etc/csf/./csf.dyndns' 'csf.syslogusers' -> '/etc/csf/./csf.syslogusers' 'csf.smtpauth' -> '/etc/csf/./csf.smtpauth' 'csf.rblconf' -> '/etc/csf/./csf.rblconf' 'csf.cloudflare' -> '/etc/csf/./csf.cloudflare' 'alert.txt' -> '/usr/local/csf/tpl/./alert.txt' 'reselleralert.txt' -> '/usr/local/csf/tpl/./reselleralert.txt' 'logalert.txt' -> '/usr/local/csf/tpl/./logalert.txt' 'logfloodalert.txt' -> '/usr/local/csf/tpl/./logfloodalert.txt' 'syslogalert.txt' -> '/usr/local/csf/tpl/./syslogalert.txt' 'integrityalert.txt' -> '/usr/local/csf/tpl/./integrityalert.txt' 'exploitalert.txt' -> '/usr/local/csf/tpl/./exploitalert.txt' 'queuealert.txt' -> '/usr/local/csf/tpl/./queuealert.txt' 'modsecipdbalert.txt' -> '/usr/local/csf/tpl/./modsecipdbalert.txt' 'tracking.txt' -> '/usr/local/csf/tpl/./tracking.txt' 'connectiontracking.txt' -> '/usr/local/csf/tpl/./connectiontracking.txt' 'processtracking.txt' -> '/usr/local/csf/tpl/./processtracking.txt' 'accounttracking.txt' -> '/usr/local/csf/tpl/./accounttracking.txt' 'usertracking.txt' -> '/usr/local/csf/tpl/./usertracking.txt' 'sshalert.txt' -> '/usr/local/csf/tpl/./sshalert.txt' 'webminalert.txt' -> '/usr/local/csf/tpl/./webminalert.txt' 'sualert.txt' -> '/usr/local/csf/tpl/./sualert.txt' 'sudoalert.txt' -> '/usr/local/csf/tpl/./sudoalert.txt' 'consolealert.txt' -> '/usr/local/csf/tpl/./consolealert.txt' 'uialert.txt' -> '/usr/local/csf/tpl/./uialert.txt' 'cpanelalert.txt' -> '/usr/local/csf/tpl/./cpanelalert.txt' 'scriptalert.txt' -> '/usr/local/csf/tpl/./scriptalert.txt' 'relayalert.txt' -> '/usr/local/csf/tpl/./relayalert.txt' 'filealert.txt' -> '/usr/local/csf/tpl/./filealert.txt' 'watchalert.txt' -> '/usr/local/csf/tpl/./watchalert.txt' 'loadalert.txt' -> '/usr/local/csf/tpl/./loadalert.txt' 'resalert.txt' -> '/usr/local/csf/tpl/./resalert.txt' 'portscan.txt' -> '/usr/local/csf/tpl/./portscan.txt' 'uidscan.txt' -> '/usr/local/csf/tpl/./uidscan.txt' 'permblock.txt' -> '/usr/local/csf/tpl/./permblock.txt' 'netblock.txt' -> '/usr/local/csf/tpl/./netblock.txt' 'portknocking.txt' -> '/usr/local/csf/tpl/./portknocking.txt' 'forkbombalert.txt' -> '/usr/local/csf/tpl/./forkbombalert.txt' 'recaptcha.txt' -> '/usr/local/csf/tpl/./recaptcha.txt' 'apache.main.txt' -> '/usr/local/csf/tpl/./apache.main.txt' 'apache.http.txt' -> '/usr/local/csf/tpl/./apache.http.txt' 'apache.https.txt' -> '/usr/local/csf/tpl/./apache.https.txt' 'litespeed.main.txt' -> '/usr/local/csf/tpl/./litespeed.main.txt' 'litespeed.http.txt' -> '/usr/local/csf/tpl/./litespeed.http.txt' 'litespeed.https.txt' -> '/usr/local/csf/tpl/./litespeed.https.txt' 'x-arf.txt' -> '/usr/local/csf/tpl/./x-arf.txt' 'regex.custom.pm' -> '/usr/local/csf/bin/./regex.custom.pm' 'pt_deleted_action.pl' -> '/usr/local/csf/bin/./pt_deleted_action.pl' 'messenger' -> '/etc/csf/./messenger' 'messenger/index.recaptcha.php' -> '/etc/csf/./messenger/index.recaptcha.php' 'messenger/index.html' -> '/etc/csf/./messenger/index.html' 'messenger/index.php' -> '/etc/csf/./messenger/index.php' 'messenger/index.recaptcha.html' -> '/etc/csf/./messenger/index.recaptcha.html' 'messenger/en.php' -> '/etc/csf/./messenger/en.php' 'messenger/index.text' -> '/etc/csf/./messenger/index.text' 'ui' -> '/etc/csf/./ui' 'ui/server.key' -> '/etc/csf/./ui/server.key' 'ui/images' -> '/etc/csf/./ui/images' 'ui/images/admin_icon.svg' -> '/etc/csf/./ui/images/admin_icon.svg' 'ui/images/reseller_icon.svg' -> '/etc/csf/./ui/images/reseller_icon.svg' 'ui/images/configserver.css' -> '/etc/csf/./ui/images/configserver.css' 'ui/images/bootstrap' -> '/etc/csf/./ui/images/bootstrap' 'ui/images/bootstrap/css' -> '/etc/csf/./ui/images/bootstrap/css' 'ui/images/bootstrap/css/bootstrap.min.css' -> '/etc/csf/./ui/images/bootstrap/css/bootstrap.min.css' 'ui/images/bootstrap/css/bootstrap.min.css.map' -> '/etc/csf/./ui/images/bootstrap/css/bootstrap.min.css.map' 'ui/images/bootstrap/js' -> '/etc/csf/./ui/images/bootstrap/js' 'ui/images/bootstrap/js/bootstrap.min.js' -> '/etc/csf/./ui/images/bootstrap/js/bootstrap.min.js' 'ui/images/bootstrap/fonts' -> '/etc/csf/./ui/images/bootstrap/fonts' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff' -> '/etc/csf/./ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.eot' -> '/etc/csf/./ui/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> '/etc/csf/./ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> '/etc/csf/./ui/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.svg' -> '/etc/csf/./ui/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'ui/images/chosen-sprite@2x.png' -> '/etc/csf/./ui/images/chosen-sprite@2x.png' 'ui/images/chosen.min.js' -> '/etc/csf/./ui/images/chosen.min.js' 'ui/images/chosen.min.css' -> '/etc/csf/./ui/images/chosen.min.css' 'ui/images/csf-loader.gif' -> '/etc/csf/./ui/images/csf-loader.gif' 'ui/images/chosen-sprite.png' -> '/etc/csf/./ui/images/chosen-sprite.png' 'ui/images/loader.gif' -> '/etc/csf/./ui/images/loader.gif' 'ui/images/jquery.min.js' -> '/etc/csf/./ui/images/jquery.min.js' 'ui/images/csf.svg' -> '/etc/csf/./ui/images/csf.svg' 'ui/images/bootstrap-chosen.css' -> '/etc/csf/./ui/images/bootstrap-chosen.css' 'ui/images/csf_small.png' -> '/etc/csf/./ui/images/csf_small.png' 'ui/images/LICENSE.txt' -> '/etc/csf/./ui/images/LICENSE.txt' 'ui/ui.allow' -> '/etc/csf/./ui/ui.allow' 'ui/ui.ban' -> '/etc/csf/./ui/ui.ban' 'ui/server.crt' -> '/etc/csf/./ui/server.crt' 'csfcron.sh' -> '/etc/cron.d/csf-cron' 'lfdcron.sh' -> '/etc/cron.d/lfd-cron' 'csf.pl' -> '/usr/sbin/csf' 'lfd.pl' -> '/usr/sbin/lfd' '/etc/csf/csf.pl' -> '/usr/sbin/csf' '/etc/csf/lfd.pl' -> '/usr/sbin/lfd' '/etc/csf/csftest.pl' -> '/usr/local/csf/bin/csftest.pl' '/etc/csf/pt_deleted_action.pl' -> '/usr/local/csf/bin/pt_deleted_action.pl' '/etc/csf/remove_apf_bfd.sh' -> '/usr/local/csf/bin/remove_apf_bfd.sh' '/etc/csf/uninstall.sh' -> '/usr/local/csf/bin/uninstall.sh' '/etc/csf/regex.custom.pm' -> '/usr/local/csf/bin/regex.custom.pm' '/etc/csf/webmin' -> '/usr/local/csf/lib/webmin' '/etc/csf/alerts' -> '/usr/local/csf/tpl' mkdir: cannot create directory ‘webmin/csf/images’: File exists mkdir: cannot create directory ‘ui/images’: File exists mkdir: cannot create directory ‘da/images’: File exists mkdir: cannot create directory ‘interworx/images’: File exists 'csf/admin_icon.svg' -> 'webmin/csf/images/admin_icon.svg' 'csf/bootstrap/css/bootstrap.min.css' -> 'webmin/csf/images/bootstrap/css/bootstrap.min.css' 'csf/bootstrap/css/bootstrap.min.css.map' -> 'webmin/csf/images/bootstrap/css/bootstrap.min.css.map' 'csf/bootstrap/js/bootstrap.min.js' -> 'webmin/csf/images/bootstrap/js/bootstrap.min.js' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff' -> 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'csf/bootstrap/fonts/glyphicons-halflings-regular.eot' -> 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'csf/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'csf/bootstrap/fonts/glyphicons-halflings-regular.svg' -> 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'csf/bootstrap-chosen.css' -> 'webmin/csf/images/bootstrap-chosen.css' 'csf/chosen.min.css' -> 'webmin/csf/images/chosen.min.css' 'csf/chosen.min.js' -> 'webmin/csf/images/chosen.min.js' 'csf/chosen-sprite@2x.png' -> 'webmin/csf/images/chosen-sprite@2x.png' 'csf/chosen-sprite.png' -> 'webmin/csf/images/chosen-sprite.png' 'csf/configserver.css' -> 'webmin/csf/images/configserver.css' 'csf/csf-loader.gif' -> 'webmin/csf/images/csf-loader.gif' 'csf/csf_small.png' -> 'webmin/csf/images/csf_small.png' 'csf/csf.svg' -> 'webmin/csf/images/csf.svg' 'csf/jquery.min.js' -> 'webmin/csf/images/jquery.min.js' 'csf/LICENSE.txt' -> 'webmin/csf/images/LICENSE.txt' 'csf/loader.gif' -> 'webmin/csf/images/loader.gif' 'csf/reseller_icon.svg' -> 'webmin/csf/images/reseller_icon.svg' 'csf/admin_icon.svg' -> 'ui/images/admin_icon.svg' 'csf/bootstrap/css/bootstrap.min.css' -> 'ui/images/bootstrap/css/bootstrap.min.css' 'csf/bootstrap/css/bootstrap.min.css.map' -> 'ui/images/bootstrap/css/bootstrap.min.css.map' 'csf/bootstrap/js/bootstrap.min.js' -> 'ui/images/bootstrap/js/bootstrap.min.js' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff' -> 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'csf/bootstrap/fonts/glyphicons-halflings-regular.eot' -> 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'csf/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'csf/bootstrap/fonts/glyphicons-halflings-regular.svg' -> 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'csf/bootstrap-chosen.css' -> 'ui/images/bootstrap-chosen.css' 'csf/chosen.min.css' -> 'ui/images/chosen.min.css' 'csf/chosen.min.js' -> 'ui/images/chosen.min.js' 'csf/chosen-sprite@2x.png' -> 'ui/images/chosen-sprite@2x.png' 'csf/chosen-sprite.png' -> 'ui/images/chosen-sprite.png' 'csf/configserver.css' -> 'ui/images/configserver.css' 'csf/csf-loader.gif' -> 'ui/images/csf-loader.gif' 'csf/csf_small.png' -> 'ui/images/csf_small.png' 'csf/csf.svg' -> 'ui/images/csf.svg' 'csf/jquery.min.js' -> 'ui/images/jquery.min.js' 'csf/LICENSE.txt' -> 'ui/images/LICENSE.txt' 'csf/loader.gif' -> 'ui/images/loader.gif' 'csf/reseller_icon.svg' -> 'ui/images/reseller_icon.svg' 'csf/admin_icon.svg' -> 'da/images/admin_icon.svg' 'csf/bootstrap/css/bootstrap.min.css' -> 'da/images/bootstrap/css/bootstrap.min.css' 'csf/bootstrap/css/bootstrap.min.css.map' -> 'da/images/bootstrap/css/bootstrap.min.css.map' 'csf/bootstrap/js/bootstrap.min.js' -> 'da/images/bootstrap/js/bootstrap.min.js' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff' -> 'da/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'csf/bootstrap/fonts/glyphicons-halflings-regular.eot' -> 'da/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> 'da/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'csf/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> 'da/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'csf/bootstrap/fonts/glyphicons-halflings-regular.svg' -> 'da/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'csf/bootstrap-chosen.css' -> 'da/images/bootstrap-chosen.css' 'csf/chosen.min.css' -> 'da/images/chosen.min.css' 'csf/chosen.min.js' -> 'da/images/chosen.min.js' 'csf/chosen-sprite@2x.png' -> 'da/images/chosen-sprite@2x.png' 'csf/chosen-sprite.png' -> 'da/images/chosen-sprite.png' 'csf/configserver.css' -> 'da/images/configserver.css' 'csf/csf-loader.gif' -> 'da/images/csf-loader.gif' 'csf/csf_small.png' -> 'da/images/csf_small.png' 'csf/csf.svg' -> 'da/images/csf.svg' 'csf/jquery.min.js' -> 'da/images/jquery.min.js' 'csf/LICENSE.txt' -> 'da/images/LICENSE.txt' 'csf/loader.gif' -> 'da/images/loader.gif' 'csf/reseller_icon.svg' -> 'da/images/reseller_icon.svg' 'csf/admin_icon.svg' -> 'interworx/images/admin_icon.svg' 'csf/bootstrap/css/bootstrap.min.css' -> 'interworx/images/bootstrap/css/bootstrap.min.css' 'csf/bootstrap/css/bootstrap.min.css.map' -> 'interworx/images/bootstrap/css/bootstrap.min.css.map' 'csf/bootstrap/js/bootstrap.min.js' -> 'interworx/images/bootstrap/js/bootstrap.min.js' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff' -> 'interworx/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'csf/bootstrap/fonts/glyphicons-halflings-regular.eot' -> 'interworx/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'csf/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> 'interworx/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'csf/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> 'interworx/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'csf/bootstrap/fonts/glyphicons-halflings-regular.svg' -> 'interworx/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'csf/bootstrap-chosen.css' -> 'interworx/images/bootstrap-chosen.css' 'csf/chosen.min.css' -> 'interworx/images/chosen.min.css' 'csf/chosen.min.js' -> 'interworx/images/chosen.min.js' 'csf/chosen-sprite@2x.png' -> 'interworx/images/chosen-sprite@2x.png' 'csf/chosen-sprite.png' -> 'interworx/images/chosen-sprite.png' 'csf/configserver.css' -> 'interworx/images/configserver.css' 'csf/csf-loader.gif' -> 'interworx/images/csf-loader.gif' 'csf/csf_small.png' -> 'interworx/images/csf_small.png' 'csf/csf.svg' -> 'interworx/images/csf.svg' 'csf/jquery.min.js' -> 'interworx/images/jquery.min.js' 'csf/LICENSE.txt' -> 'interworx/images/LICENSE.txt' 'csf/loader.gif' -> 'interworx/images/loader.gif' 'csf/reseller_icon.svg' -> 'interworx/images/reseller_icon.svg' 'messenger/en.php' -> '/etc/csf/messenger/en.php' 'messenger/index.php' -> '/etc/csf/messenger/index.php' 'messenger/index.recaptcha.php' -> '/etc/csf/messenger/index.recaptcha.php' 'uninstall.generic.sh' -> '/usr/local/csf/bin/uninstall.sh' 'csftest.pl' -> '/usr/local/csf/bin/csftest.pl' 'remove_apf_bfd.sh' -> '/usr/local/csf/bin/remove_apf_bfd.sh' 'readme.txt' -> '/etc/csf/readme.txt' 'sanity.txt' -> '/usr/local/csf/lib/sanity.txt' 'csf.rbls' -> '/usr/local/csf/lib/csf.rbls' 'restricted.txt' -> '/usr/local/csf/lib/restricted.txt' 'changelog.txt' -> '/etc/csf/changelog.txt' 'downloadservers' -> '/etc/csf/downloadservers' 'install.txt' -> '/etc/csf/install.txt' 'version.txt' -> '/etc/csf/version.txt' 'license.txt' -> '/etc/csf/license.txt' 'webmin' -> '/usr/local/csf/lib/webmin' 'webmin/csf' -> '/usr/local/csf/lib/webmin/csf' 'webmin/csf/images' -> '/usr/local/csf/lib/webmin/csf/images' 'webmin/csf/images/admin_icon.svg' -> '/usr/local/csf/lib/webmin/csf/images/admin_icon.svg' 'webmin/csf/images/reseller_icon.svg' -> '/usr/local/csf/lib/webmin/csf/images/reseller_icon.svg' 'webmin/csf/images/configserver.css' -> '/usr/local/csf/lib/webmin/csf/images/configserver.css' 'webmin/csf/images/bootstrap' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap' 'webmin/csf/images/bootstrap/css' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/css' 'webmin/csf/images/bootstrap/css/bootstrap.min.css' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/css/bootstrap.min.css' 'webmin/csf/images/bootstrap/css/bootstrap.min.css.map' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/css/bootstrap.min.css.map' 'webmin/csf/images/bootstrap/js' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/js' 'webmin/csf/images/bootstrap/js/bootstrap.min.js' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/js/bootstrap.min.js' 'webmin/csf/images/bootstrap/fonts' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts' 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.eot' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.svg' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'webmin/csf/images/chosen-sprite@2x.png' -> '/usr/local/csf/lib/webmin/csf/images/chosen-sprite@2x.png' 'webmin/csf/images/chosen.min.js' -> '/usr/local/csf/lib/webmin/csf/images/chosen.min.js' 'webmin/csf/images/chosen.min.css' -> '/usr/local/csf/lib/webmin/csf/images/chosen.min.css' 'webmin/csf/images/csf-loader.gif' -> '/usr/local/csf/lib/webmin/csf/images/csf-loader.gif' 'webmin/csf/images/chosen-sprite.png' -> '/usr/local/csf/lib/webmin/csf/images/chosen-sprite.png' 'webmin/csf/images/loader.gif' -> '/usr/local/csf/lib/webmin/csf/images/loader.gif' 'webmin/csf/images/jquery.min.js' -> '/usr/local/csf/lib/webmin/csf/images/jquery.min.js' 'webmin/csf/images/csf.svg' -> '/usr/local/csf/lib/webmin/csf/images/csf.svg' 'webmin/csf/images/bootstrap-chosen.css' -> '/usr/local/csf/lib/webmin/csf/images/bootstrap-chosen.css' 'webmin/csf/images/csf_small.png' -> '/usr/local/csf/lib/webmin/csf/images/csf_small.png' 'webmin/csf/images/LICENSE.txt' -> '/usr/local/csf/lib/webmin/csf/images/LICENSE.txt' 'webmin/csf/module.info' -> '/usr/local/csf/lib/webmin/csf/module.info' 'webmin/csf/index.cgi' -> '/usr/local/csf/lib/webmin/csf/index.cgi' 'ConfigServer' -> '/usr/local/csf/lib/ConfigServer' 'ConfigServer/Sanity.pm' -> '/usr/local/csf/lib/ConfigServer/Sanity.pm' 'ConfigServer/Service.pm' -> '/usr/local/csf/lib/ConfigServer/Service.pm' 'ConfigServer/Slurp.pm' -> '/usr/local/csf/lib/ConfigServer/Slurp.pm' 'ConfigServer/AbuseIP.pm' -> '/usr/local/csf/lib/ConfigServer/AbuseIP.pm' 'ConfigServer/URLGet.pm' -> '/usr/local/csf/lib/ConfigServer/URLGet.pm' 'ConfigServer/Config.pm' -> '/usr/local/csf/lib/ConfigServer/Config.pm' 'ConfigServer/Ports.pm' -> '/usr/local/csf/lib/ConfigServer/Ports.pm' 'ConfigServer/DisplayResellerUI.pm' -> '/usr/local/csf/lib/ConfigServer/DisplayResellerUI.pm' 'ConfigServer/Logger.pm' -> '/usr/local/csf/lib/ConfigServer/Logger.pm' 'ConfigServer/ServerCheck.pm' -> '/usr/local/csf/lib/ConfigServer/ServerCheck.pm' 'ConfigServer/CloudFlare.pm' -> '/usr/local/csf/lib/ConfigServer/CloudFlare.pm' 'ConfigServer/GetIPs.pm' -> '/usr/local/csf/lib/ConfigServer/GetIPs.pm' 'ConfigServer/RegexMain.pm' -> '/usr/local/csf/lib/ConfigServer/RegexMain.pm' 'ConfigServer/LookUpIP.pm' -> '/usr/local/csf/lib/ConfigServer/LookUpIP.pm' 'ConfigServer/Messenger.pm' -> '/usr/local/csf/lib/ConfigServer/Messenger.pm' 'ConfigServer/Sendmail.pm' -> '/usr/local/csf/lib/ConfigServer/Sendmail.pm' 'ConfigServer/GetEthDev.pm' -> '/usr/local/csf/lib/ConfigServer/GetEthDev.pm' 'ConfigServer/KillSSH.pm' -> '/usr/local/csf/lib/ConfigServer/KillSSH.pm' 'ConfigServer/CheckIP.pm' -> '/usr/local/csf/lib/ConfigServer/CheckIP.pm' 'ConfigServer/DisplayUI.pm' -> '/usr/local/csf/lib/ConfigServer/DisplayUI.pm' 'ConfigServer/cseUI.pm' -> '/usr/local/csf/lib/ConfigServer/cseUI.pm' 'ConfigServer/RBLCheck.pm' -> '/usr/local/csf/lib/ConfigServer/RBLCheck.pm' 'ConfigServer/ServerStats.pm' -> '/usr/local/csf/lib/ConfigServer/ServerStats.pm' 'ConfigServer/RBLLookup.pm' -> '/usr/local/csf/lib/ConfigServer/RBLLookup.pm' 'Net' -> '/usr/local/csf/lib/Net' 'Net/CIDR' -> '/usr/local/csf/lib/Net/CIDR' 'Net/CIDR/Lite.pm' -> '/usr/local/csf/lib/Net/CIDR/Lite.pm' 'Net/IP.pm' -> '/usr/local/csf/lib/Net/IP.pm' cp: cannot stat 'Geo': No such file or directory 'Crypt' -> '/usr/local/csf/lib/Crypt' 'Crypt/CBC.pm' -> '/usr/local/csf/lib/Crypt/CBC.pm' 'Crypt/Blowfish_PP.pm' -> '/usr/local/csf/lib/Crypt/Blowfish_PP.pm' 'HTTP' -> '/usr/local/csf/lib/HTTP' 'HTTP/Tiny.pm' -> '/usr/local/csf/lib/HTTP/Tiny.pm' 'JSON' -> '/usr/local/csf/lib/JSON' 'JSON/Tiny.pm' -> '/usr/local/csf/lib/JSON/Tiny.pm' 'version/version' -> '/usr/local/csf/lib/version' 'version/version/vpp.pm' -> '/usr/local/csf/lib/version/vpp.pm' 'version/version/regex.pm' -> '/usr/local/csf/lib/version/regex.pm' 'version/version.pm' -> '/usr/local/csf/lib/version.pm' 'csf.div' -> '/usr/local/csf/lib/csf.div' 'csfajaxtail.js' -> '/usr/local/csf/lib/csfajaxtail.js' 'ui/images/admin_icon.svg' -> '/etc/csf/ui/./images/admin_icon.svg' 'ui/images/reseller_icon.svg' -> '/etc/csf/ui/./images/reseller_icon.svg' 'ui/images/configserver.css' -> '/etc/csf/ui/./images/configserver.css' 'ui/images/bootstrap/css/bootstrap.min.css' -> '/etc/csf/ui/./images/bootstrap/css/bootstrap.min.css' 'ui/images/bootstrap/css/bootstrap.min.css.map' -> '/etc/csf/ui/./images/bootstrap/css/bootstrap.min.css.map' 'ui/images/bootstrap/js/bootstrap.min.js' -> '/etc/csf/ui/./images/bootstrap/js/bootstrap.min.js' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff' -> '/etc/csf/ui/./images/bootstrap/fonts/glyphicons-halflings-regular.woff' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.eot' -> '/etc/csf/ui/./images/bootstrap/fonts/glyphicons-halflings-regular.eot' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.woff2' -> '/etc/csf/ui/./images/bootstrap/fonts/glyphicons-halflings-regular.woff2' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.ttf' -> '/etc/csf/ui/./images/bootstrap/fonts/glyphicons-halflings-regular.ttf' 'ui/images/bootstrap/fonts/glyphicons-halflings-regular.svg' -> '/etc/csf/ui/./images/bootstrap/fonts/glyphicons-halflings-regular.svg' 'ui/images/chosen-sprite@2x.png' -> '/etc/csf/ui/./images/chosen-sprite@2x.png' 'ui/images/chosen.min.js' -> '/etc/csf/ui/./images/chosen.min.js' 'ui/images/chosen.min.css' -> '/etc/csf/ui/./images/chosen.min.css' 'ui/images/csf-loader.gif' -> '/etc/csf/ui/./images/csf-loader.gif' 'ui/images/chosen-sprite.png' -> '/etc/csf/ui/./images/chosen-sprite.png' 'ui/images/loader.gif' -> '/etc/csf/ui/./images/loader.gif' 'ui/images/jquery.min.js' -> '/etc/csf/ui/./images/jquery.min.js' 'ui/images/csf.svg' -> '/etc/csf/ui/./images/csf.svg' 'ui/images/bootstrap-chosen.css' -> '/etc/csf/ui/./images/bootstrap-chosen.css' 'ui/images/csf_small.png' -> '/etc/csf/ui/./images/csf_small.png' 'ui/images/LICENSE.txt' -> '/etc/csf/ui/./images/LICENSE.txt' 'profiles' -> '/usr/local/csf/profiles' 'profiles/protection_high.conf' -> '/usr/local/csf/profiles/protection_high.conf' 'profiles/block_all_perm.conf' -> '/usr/local/csf/profiles/block_all_perm.conf' 'profiles/block_all_temp.conf' -> '/usr/local/csf/profiles/block_all_temp.conf' 'profiles/protection_low.conf' -> '/usr/local/csf/profiles/protection_low.conf' 'profiles/protection_medium.conf' -> '/usr/local/csf/profiles/protection_medium.conf' 'profiles/disable_alerts.conf' -> '/usr/local/csf/profiles/disable_alerts.conf' 'csf.conf' -> '/usr/local/csf/profiles/reset_to_defaults.conf' 'lfd.logrotate' -> '/etc/logrotate.d/lfd' 'csf.1.txt' -> '/usr/local/man/man1/csf.1' 'csf.help' -> '/usr/local/csf/lib/csf.help' chmod: cannot access '/var/log/lfd.log*': No such file or directory mode of '/usr/local/csf/bin/csftest.pl' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/usr/local/csf/bin/pt_deleted_action.pl' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/usr/local/csf/bin/remove_apf_bfd.sh' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/usr/local/csf/bin/uninstall.sh' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/usr/local/csf/bin/regex.custom.pm' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/etc/csf/csf.pl' retained as 0700 (rwx------) mode of '/etc/csf/csftest.pl' retained as 0700 (rwx------) mode of '/etc/csf/lfd.pl' retained as 0700 (rwx------) mode of '/etc/csf/pt_deleted_action.pl' retained as 0700 (rwx------) chmod: cannot access '/etc/csf/*.cgi': No such file or directory '/etc/csf/*.cgi' could not be accessed mode of '/etc/csf/remove_apf_bfd.sh' retained as 0700 (rwx------) mode of '/etc/csf/uninstall.sh' retained as 0700 (rwx------) chmod: cannot access '/etc/csf/*.php': No such file or directory '/etc/csf/*.php' could not be accessed chmod: cannot access '/etc/csf/*.py': No such file or directory '/etc/csf/*.py' could not be accessed mode of '/etc/csf/webmin/csf/index.cgi' changed from 0600 (rw-------) to 0700 (rwx------) mode of '/etc/cron.d/lfd-cron' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) mode of '/etc/cron.d/csf-cron' changed from 0755 (rwxr-xr-x) to 0644 (rw-r--r--) 'csget.pl' -> '/etc/cron.daily/csget' Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC entries checked: /usr/local/lib64/perl5/5.40 /usr/local/share/perl5/5.40 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 22. BEGIN failed--compilation aborted at /etc/cron.daily/csget line 22. mode of 'auto.generic.pl' changed from 0755 (rwxr-xr-x) to 0700 (rwx------) '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687648_pre_v15_01_upgrade' *** IPV6 Enabled *** IPV6_SPI set to 1 TCP ports currently listening for incoming connections: 22 UDP ports currently listening for incoming connections: Note: The port details above are for information only, csf hasn't been auto-configured. Don't forget to: 1. Configure the following options in the csf configuration to suite your server: TCP_*, UDP_* 2. Restart csf and lfd 3. Set TESTING to 0 once you're happy with the firewall, lfd will not run until you do so Adding current SSH session IP address to the csf whitelist in csf.allow: Adding 103.73.44.244 to csf.allow only while in TESTING mode (not iptables ACCEPT) *WARNING* TESTING mode is enabled - do not forget to disable it in the configuration 'lfd.service' -> '/usr/lib/systemd/system/lfd.service' 'csf.service' -> '/usr/lib/systemd/system/csf.service' Created symlink '/etc/systemd/system/multi-user.target.wants/csf.service' → '/usr/lib/systemd/system/csf.service'. Created symlink '/etc/systemd/system/multi-user.target.wants/lfd.service' → '/usr/lib/systemd/system/lfd.service'. Failed to disable unit: Unit firewalld.service does not exist Failed to stop firewalld.service: Unit firewalld.service not loaded. Unit firewalld.service does not exist, proceeding anyway. Created symlink '/etc/systemd/system/firewalld.service' → '/dev/null'. '/etc/csf/csfwebmin.tgz' -> '/usr/local/csf/csfwebmin.tgz' Installation Completed Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687649_initial_default' *WARNING* TESTING mode is enabled - do not forget to disable it in the configuration Configuration Profiles ====================== block_all_perm block_all_temp disable_alerts protection_high protection_low protection_medium reset_to_defaults Configuration Backups ===================== 1759687649_initial_default (Sun Oct 5 18:07:29 2025) 1759687648_pre_v15_01_upgrade (Sun Oct 5 18:07:28 2025) *WARNING* TESTING mode is enabled - do not forget to disable it in the configuration CSF adding memcached, varnish ports to csf.allow list... --- /etc/csf/csf.conf 2025-10-05 18:07:28.562081776 +0000 +++ /etc/csf/csf.conf.tmp 2025-10-05 18:07:29.927086170 +0000 @@ -136,7 +136,7 @@ LF_SPI = "1" # Allow incoming TCP ports -TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995" +TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" # Allow outgoing TCP ports TCP_OUT = "20,21,22,25,53,853,80,110,113,443,587,993,995" @@ -247,7 +247,7 @@ IPV6_SPI = "1" # Allow incoming IPv6 TCP ports -TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995" +TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" # Allow outgoing IPv6 TCP ports TCP6_OUT = "20,21,22,25,53,853,80,110,113,443,587,993,995" egrep: warning: egrep is obsolescent; using grep -E TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" TCP_OUT = "8080,2525,465,111,2049,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,111,2049,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,111,2049,1110,33434:33534,443,20,21,53,853,113,123" DROP_NOLOG = "23,67,68,111,113,135:139,445,500,513,520" Disabling CSF Testing mode (activates firewall)... Before RPC/NFS port tweak egrep: warning: egrep is obsolescent; using grep -E TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" TCP_OUT = "8080,2525,465,111,2049,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,111,2049,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,111,2049,1110,33434:33534,443,20,21,53,853,113,123" TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" TCP6_OUT = "8080,2525,465,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP6_IN = "20,21,53,853,80,443" UDP6_OUT = "20,21,53,853,113,123" egrep: warning: egrep is obsolescent; using grep -E TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" TCP_OUT = "8080,2525,465,111,2049,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,111,2049,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,111,2049,1110,33434:33534,443,20,21,53,853,113,123" TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" DROP_NOLOG = "23,67,68,111,113,135:139,445,500,513,520" egrep: warning: egrep is obsolescent; using grep -E TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" TCP_OUT = "8080,2525,465,2049,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,2049,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,2049,1110,33434:33534,443,20,21,53,853,113,123" TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,2049,81,9418,30001:50011" egrep: warning: egrep is obsolescent; using grep -E TCP_OUT = "8080,2525,465,111,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,111,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,111,1110,33434:33534,443,20,21,53,853,113,123" DROP_NOLOG = "23,67,68,111,113,135:139,445,500,513,520" After RPC/NFS port tweak egrep: warning: egrep is obsolescent; using grep -E egrep: warning: egrep is obsolescent; using grep -E TCP_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,81,9418,30001:50011" TCP_OUT = "8080,2525,465,1110,1194,9418,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP_IN = "67,68,1110,33434:33534,20,21,53,853,80,443" UDP_OUT = "67,68,1110,33434:33534,443,20,21,53,853,113,123" TCP6_IN = "20,21,22,25,53,853,80,110,143,443,465,587,993,995,1110,1186,1194,81,9418,30001:50011" TCP6_OUT = "8080,2525,465,3306,20,21,22,25,53,853,80,110,113,443,587,993,995" UDP6_IN = "20,21,53,853,80,443" UDP6_OUT = "20,21,53,853,113,123" add failed: 103.73.44.244 is in already in the allow file /etc/csf/csf.allow Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687653_cmm_default_tweaked' Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687653_cmm_b4_censys_block' Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687653_cmm_b4_shodan_block' Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687653_cmm_b4_whitelist' /usr/local/src/centminmod/inc/csftweaks.inc: line 782: dig: command not found /usr/local/src/centminmod/inc/csftweaks.inc: line 784: dig: command not found /usr/local/src/centminmod/inc/csftweaks.inc: line 786: dig: command not found /usr/local/src/centminmod/inc/csftweaks.inc: line 788: dig: command not found Creating backup... '/etc/csf/csf.conf' -> '/var/lib/csf/backup/1759687653_cmm_after_whitelist' Configuration Profiles ====================== block_all_perm block_all_temp disable_alerts protection_high protection_low protection_medium reset_to_defaults Configuration Backups ===================== 1759687653_cmm_default_tweaked (Sun Oct 5 18:07:33 2025) 1759687653_cmm_b4_whitelist (Sun Oct 5 18:07:33 2025) 1759687653_cmm_b4_shodan_block (Sun Oct 5 18:07:33 2025) 1759687653_cmm_b4_censys_block (Sun Oct 5 18:07:33 2025) 1759687653_cmm_after_whitelist (Sun Oct 5 18:07:33 2025) 1759687652_cmm_before_ptload_action (Sun Oct 5 18:07:32 2025) 1759687650_cmm_before_maxmind_rego_sharedkey (Sun Oct 5 18:07:30 2025) 1759687650_cmm_after_maxmind_rego_sharedkey (Sun Oct 5 18:07:30 2025) 1759687649_initial_default (Sun Oct 5 18:07:29 2025) 1759687648_pre_v15_01_upgrade (Sun Oct 5 18:07:28 2025) /root/.cache/crontab: mkdir: No such file or directory Adding Applications/Users to CSF ignore list... systemctl enable csf.service Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `ALLOWIN' Flushing chain `ALLOWOUT' Flushing chain `DENYIN' Flushing chain `DENYOUT' Flushing chain `INVALID' Flushing chain `INVDROP' Flushing chain `LOCALINPUT' Flushing chain `LOCALOUTPUT' Flushing chain `LOGDROPIN' Flushing chain `LOGDROPOUT' Deleting chain `ALLOWIN' Deleting chain `ALLOWOUT' Deleting chain `DENYIN' Deleting chain `DENYOUT' Deleting chain `INVALID' Deleting chain `INVDROP' Deleting chain `LOCALINPUT' Deleting chain `LOCALOUTPUT' Deleting chain `LOGDROPIN' Deleting chain `LOGDROPOUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `PREROUTING' Flushing chain `OUTPUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `ALLOWIN' Flushing chain `ALLOWOUT' Flushing chain `DENYIN' Flushing chain `DENYOUT' Flushing chain `INVALID' Flushing chain `INVDROP' Flushing chain `LOCALINPUT' Flushing chain `LOCALOUTPUT' Flushing chain `LOGDROPIN' Flushing chain `LOGDROPOUT' Deleting chain `ALLOWIN' Deleting chain `ALLOWOUT' Deleting chain `DENYIN' Deleting chain `DENYOUT' Deleting chain `INVALID' Deleting chain `INVDROP' Deleting chain `LOCALINPUT' Deleting chain `LOCALOUTPUT' Deleting chain `LOGDROPIN' Deleting chain `LOGDROPOUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `PREROUTING' Flushing chain `OUTPUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' csf: FASTSTART loading DROP no logging (IPv4) csf: FASTSTART loading DROP no logging (IPv6) LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *TCP_IN Blocked* " LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *TCP_OUT Blocked* " LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *UDP_IN Blocked* " LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDP_OUT Blocked* " LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *ICMP_IN Blocked* " LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *ICMP_OUT Blocked* " LOG tcp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *TCP6IN Blocked* " LOG tcp opt -- in * out * ::/0 -> ::/0 tcp flags:0x17/0x02 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *TCP6OUT Blocked* " LOG udp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *UDP6IN Blocked* " LOG udp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDP6OUT Blocked* " LOG ipv6-icmp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *ICMP6IN Blocked* " LOG ipv6-icmp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *ICMP6OUT Blocked* " DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 REJECT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 reject-with icmp-port-unreachable DROP all opt -- in * out * ::/0 -> ::/0 REJECT all opt -- in * out * ::/0 -> ::/0 reject-with icmp6-port-unreachable DENYOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 DENYIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ALLOWOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ALLOWIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 DENYOUT all opt -- in * out !lo ::/0 -> ::/0 DENYIN all opt -- in !lo out * ::/0 -> ::/0 ALLOWOUT all opt -- in * out !lo ::/0 -> ::/0 ALLOWIN all opt -- in !lo out * ::/0 -> ::/0 csf: FASTSTART loading Packet Filter (IPv4) csf: FASTSTART loading Packet Filter (IPv6) DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 INVALID tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 INVALID tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 DROP all opt -- in * out * ::/0 -> ::/0 INVALID tcp opt -- in !lo out * ::/0 -> ::/0 INVALID tcp opt -- in * out !lo ::/0 -> ::/0 csf: IPSET creating set chain_DENY csf: IPSET creating set chain_6_DENY csf: FASTSTART loading csf.deny (IPv4) csf: FASTSTART loading csf.deny (IPv6) csf: FASTSTART loading csf.deny (IPSET) csf: IPSET creating set chain_ALLOWDYN ACCEPT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set chain_ALLOWDYN src ACCEPT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set chain_ALLOWDYN dst csf: IPSET creating set chain_6_ALLOWDYN ACCEPT all opt -- in * out * ::/0 -> ::/0 match-set chain_6_ALLOWDYN src ACCEPT all opt -- in * out * ::/0 -> ::/0 match-set chain_6_ALLOWDYN dst ALLOWDYNIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ALLOWDYNOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ALLOWDYNIN all opt -- in !lo out * ::/0 -> ::/0 ALLOWDYNOUT all opt -- in * out !lo ::/0 -> ::/0 csf: IPSET creating set chain_ALLOW csf: IPSET creating set chain_6_ALLOW csf: FASTSTART loading csf.allow (IPv4) csf: FASTSTART loading csf.allow (IPv6) csf: FASTSTART loading csf.allow (IPSET) RETURN udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 owner UID match 0 RETURN udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 100/sec burst 500 LOG all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDPFLOOD* " REJECT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 reject-with icmp-port-unreachable UDPFLOOD udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 RETURN udp opt -- in * out * ::/0 -> ::/0 owner UID match 0 RETURN udp opt -- in * out !lo ::/0 -> ::/0 limit: avg 100/sec burst 500 LOG all opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDPFLOOD* " REJECT udp opt -- in * out !lo ::/0 -> ::/0 reject-with icmp6-port-unreachable UDPFLOOD udp opt -- in * out !lo ::/0 -> ::/0 ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmptype 8 limit: avg 1/sec burst 5 LOGDROPIN icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmptype 8 ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT ipv6-icmp opt -- in !lo out * ::/0 -> ::/0 ACCEPT ipv6-icmp opt -- in * out !lo ::/0 -> ::/0 ACCEPT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all opt -- in !lo out * ::/0 -> ::/0 state RELATED,ESTABLISHED ACCEPT all opt -- in * out !lo ::/0 -> ::/0 state RELATED,ESTABLISHED csf: FASTSTART loading TCP_IN (IPv4) csf: FASTSTART loading TCP6_IN (IPv6) csf: FASTSTART loading TCP_OUT (IPv4) csf: FASTSTART loading TCP6_OUT (IPv6) csf: FASTSTART loading UDP_IN (IPv4) csf: FASTSTART loading UDP6_IN (IPv6) csf: FASTSTART loading UDP_OUT (IPv4) csf: FASTSTART loading UDP6_OUT (IPv6) ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 LOGDROPIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in lo out * ::/0 -> ::/0 ACCEPT all opt -- in * out lo ::/0 -> ::/0 LOGDROPOUT all opt -- in * out !lo ::/0 -> ::/0 LOGDROPIN all opt -- in !lo out * ::/0 -> ::/0 csf: FASTSTART loading DNS (IPv4) csf: FASTSTART loading DNS (IPv6) LOCALOUTPUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 LOCALINPUT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 LOCALOUTPUT all opt -- in * out !lo ::/0 -> ::/0 LOCALINPUT all opt -- in !lo out * ::/0 -> ::/0 ● lfd.service - ConfigServer Firewall & Security - lfd Loaded: loaded (/usr/lib/systemd/system/lfd.service; enabled; preset: disabled) Active: active (running) since Sun 2025-10-05 18:07:35 UTC; 19ms ago Invocation: 1bad19fb6c4e46dea3719e7103e7b99a Process: 28529 ExecStart=/usr/sbin/lfd (code=exited, status=0/SUCCESS) Main PID: 28542 (lfd - starting) Tasks: 1 (limit: 47437) Memory: 26.4M (peak: 30M) CPU: 187ms CGroup: /system.slice/lfd.service ├─28542 "lfd - starting" └─28545 /sbin/ip -oneline addr Oct 05 18:07:35 nsrv.DentalSupplyGuy.com systemd[1]: Starting lfd.service - ConfigServer Firewall & Security - lfd... Oct 05 18:07:35 nsrv.DentalSupplyGuy.com systemd[1]: Started lfd.service - ConfigServer Firewall & Security - lfd. *WARNING* Binary location for [HOST] [/usr/bin/host] in /etc/csf/csf.conf is either incorrect, is not installed or is not executable *WARNING* Missing or incorrect binary locations will break csf and lfd functionality *WARNING* LF_DISTFTP_UNIQ sanity check. LF_DISTFTP_UNIQ = 40. Recommended range: 2-20 (Default: 2) *WARNING* DENY_TEMP_IP_LIMIT sanity check. DENY_TEMP_IP_LIMIT = 150000. Recommended range: 10-1000 (Default: 100) *WARNING* LF_DISTFTP sanity check. LF_DISTFTP = 40. Recommended range: 0-20 (Default: 0) *WARNING* RESTRICT_SYSLOG is disabled. See SECURITY WARNING in /etc/csf/csf.conf. systemctl enable lfd.service Installing ipcalc please wait... Installed: geolite2-city-20191217-14.el10.noarch geolite2-country-20191217-14.el10.noarch ipcalc-1.0.3-12.el10.x86_64 libmaxminddb-1.9.1-4.el10.x86_64 --2025-10-05 18:07:37-- https://download.centminmod.com/scripts/csf_final_update.sh Resolving download.centminmod.com (download.centminmod.com)... 2606:4700::6812:aaa, 2606:4700::6812:baa, 104.18.10.170, ... Connecting to download.centminmod.com (download.centminmod.com)|2606:4700::6812:aaa|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 53633 (52K) [application/x-sh] Saving to: ‘/svr-setup/csf_final_update.sh’ 0K .......... .......... .......... .......... .......... 95% 88.5M 0s 50K .. 100% 62.7M=0.001s 2025-10-05 18:07:37 (86.9 MB/s) - ‘/svr-setup/csf_final_update.sh’ saved [53633/53633] WARNING: Security verification disabled - use only in emergency! WARNING: This configuration bypasses cryptographic verification WARNING: Continuing in 5 seconds... (Ctrl+C to abort) CSF Final Update Script - Fully Implemented Version Security Level: disabled Dry Run Mode: false Force Update: false Security Features: - SHA256 hash verification (with MD5 fallback) - GPG signature verification (if available) - Security enforcement: disabled - Mirror failover: Disabled Starting CSF migration process... CSF already using correct mirror: download.centminmod.com SHA256 checksums match - files are identical Starting removal and blocking of ConfigServer IPs in CSF Removing IP 94.130.90.175 (download.configserver.com) from CSF allow list csf: 94.130.90.175 not found in csf.allow Adding IP 94.130.90.175 (download.configserver.com) to CSF deny list Adding 94.130.90.175 to csf.deny and iptables DROP... csf: IPSET adding [94.130.90.175] to set [chain_DENY] Removing IP 54.36.165.115 (download2.configserver.com) from CSF allow list csf: 54.36.165.115 not found in csf.allow Adding IP 54.36.165.115 (download2.configserver.com) to CSF deny list Adding 54.36.165.115 to csf.deny and iptables DROP... csf: IPSET adding [54.36.165.115] to set [chain_DENY] Removing IP 66.165.246.166 (license.configserver.com) from CSF allow list csf: 66.165.246.166 not found in csf.allow Adding IP 66.165.246.166 (license.configserver.com) to CSF deny list Adding 66.165.246.166 to csf.deny and iptables DROP... csf: IPSET adding [66.165.246.166] to set [chain_DENY] Removing IP 2604:4500:9:156::6 (ipv6.license.configserver.com) from CSF allow list csf: 2604:4500:9:156::6 not found in csf.allow Adding IP 2604:4500:9:156::6 (ipv6.license.configserver.com) to CSF deny list Adding 2604:4500:9:156::6 to csf.deny and iptables DROP... csf: IPSET adding [2604:4500:9:156::6] to set [chain_6_DENY] Completed removal and blocking of ConfigServer IPs Emergency bypass was used - audit flag set -------------------------------------------- Add Cloudflare IP list to CSF from: https://www.cloudflare.com/ips-v4/ from: https://www.cloudflare.com/ips-v6/ -------------------------------------------- -------------------------------------------- Add to /etc/csf/csf.allow -------------------------------------------- Adding 173.245.48.0/20 to csf.allow and iptables ACCEPT... csf: IPSET adding [173.245.48.0/20] to set [chain_ALLOW] Adding 103.21.244.0/22 to csf.allow and iptables ACCEPT... csf: IPSET adding [103.21.244.0/22] to set [chain_ALLOW] Adding 103.22.200.0/22 to csf.allow and iptables ACCEPT... csf: IPSET adding [103.22.200.0/22] to set [chain_ALLOW] Adding 103.31.4.0/22 to csf.allow and iptables ACCEPT... csf: IPSET adding [103.31.4.0/22] to set [chain_ALLOW] Adding 141.101.64.0/18 to csf.allow and iptables ACCEPT... csf: IPSET adding [141.101.64.0/18] to set [chain_ALLOW] Adding 108.162.192.0/18 to csf.allow and iptables ACCEPT... csf: IPSET adding [108.162.192.0/18] to set [chain_ALLOW] Adding 190.93.240.0/20 to csf.allow and iptables ACCEPT... csf: IPSET adding [190.93.240.0/20] to set [chain_ALLOW] Adding 188.114.96.0/20 to csf.allow and iptables ACCEPT... csf: IPSET adding [188.114.96.0/20] to set [chain_ALLOW] Adding 197.234.240.0/22 to csf.allow and iptables ACCEPT... csf: IPSET adding [197.234.240.0/22] to set [chain_ALLOW] Adding 198.41.128.0/17 to csf.allow and iptables ACCEPT... csf: IPSET adding [198.41.128.0/17] to set [chain_ALLOW] Adding 162.158.0.0/15 to csf.allow and iptables ACCEPT... csf: IPSET adding [162.158.0.0/15] to set [chain_ALLOW] Adding 104.16.0.0/13 to csf.allow and iptables ACCEPT... csf: IPSET adding [104.16.0.0/13] to set [chain_ALLOW] Adding 104.24.0.0/14 to csf.allow and iptables ACCEPT... csf: IPSET adding [104.24.0.0/14] to set [chain_ALLOW] Adding 172.64.0.0/13 to csf.allow and iptables ACCEPT... csf: IPSET adding [172.64.0.0/13] to set [chain_ALLOW] Adding 131.0.72.0/22 to csf.allow and iptables ACCEPT... csf: IPSET adding [131.0.72.0/22] to set [chain_ALLOW] Adding 2400:cb00::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2400:cb00::/32] to set [chain_6_ALLOW] Adding 2606:4700::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2606:4700::/32] to set [chain_6_ALLOW] Adding 2803:f800::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2803:f800::/32] to set [chain_6_ALLOW] Adding 2405:b500::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2405:b500::/32] to set [chain_6_ALLOW] Adding 2405:8100::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2405:8100::/32] to set [chain_6_ALLOW] Adding 2a06:98c0::/29 to csf.allow and iptables ACCEPT... csf: IPSET adding [2a06:98c0::/29] to set [chain_6_ALLOW] Adding 2c0f:f248::/32 to csf.allow and iptables ACCEPT... csf: IPSET adding [2c0f:f248::/32] to set [chain_6_ALLOW] created /usr/local/nginx/conf/cloudflare.conf include file ************************************************* * CSF firewall installed (B************************************************* csfcron_setup /root/.cache/crontab: mkdir: No such file or directory siegeinstall installpythonfuct mailparseinstall egrep: warning: egrep is obsolescent; using grep -E 8.3 checkphpextmailparse 0 Check for php extensions (BDownloading mailparse extension MAILPARSEPHP_VER=3.1.8 egrep: warning: egrep is obsolescent; using grep -E 8.3 0 download MAILPARSEPHP_VER=3.1.8 Download mailparse-3.1.8.tgz ... (BError: mailparse-3.1.8.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://pecl.php.net/get/mailparse-3.1.8.tgz --tries=3 --timeout=60 2025-10-05 18:07:50 URL:https://pecl.php.net/get/mailparse-3.1.8.tgz [945958/945958] -> "mailparse-3.1.8.tgz" [1] Download done. (Bmailparse-3.1.8.tgz valid file. (B /usr/local/src/centminmod/inc/gcc.inc: line 5: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 egrep: warning: egrep is obsolescent; using grep -E 8.3 mailparseinstall 0 ************************************************* * Installing mailparse 3.1.8 PHP Extension (B************************************************* mailparseinstall MAILPARSEPHP_VER=3.1.8 /svr-setup cd /svr-setup /usr/local/src/centminmod/inc/mailparse.inc: line 81: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/mailparse.inc: line 82: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. Copying mailparse.ini > /etc/centminmod/php.d/mailparse.ini ************************************************* * mailparse PHP installed (B************************************************* imagickinstall Check for php extensions (B Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:02:30 ago on Sun 05 Oct 2025 06:05:20 PM UTC. Dependencies resolved. ================================================================================ Package Arch Version Repo Size ================================================================================ Installing: python3-dnf-plugin-versionlock noarch 4.7.0-8.el10 baseos 29 k Transaction Summary ================================================================================ Install 1 Package Total download size: 29 k Installed size: 35 k Downloading Packages: python3-dnf-plugin-versionlock-4.7.0-8.el10.noa 11 MB/s | 29 kB 00:00 -------------------------------------------------------------------------------- Total 1.4 MB/s | 29 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : python3-dnf-plugin-versionlock-4.7.0-8.el10.noarch 1/1 Running scriptlet: python3-dnf-plugin-versionlock-4.7.0-8.el10.noarch 1/1 Installed: python3-dnf-plugin-versionlock-4.7.0-8.el10.noarch Complete! Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Last metadata expiration check: 0:02:32 ago on Sun 05 Oct 2025 06:05:20 PM UTC. Dependencies resolved. ================================================================================ Package Architecture Version Repository Size ================================================================================ Installing: open-sans-fonts noarch 1.10-24.el10 appstream 472 k Transaction Summary ================================================================================ Install 1 Package Total download size: 472 k Installed size: 2.1 M Downloading Packages: open-sans-fonts-1.10-24.el10.noarch.rpm 108 MB/s | 472 kB 00:00 -------------------------------------------------------------------------------- Total 20 MB/s | 472 kB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : open-sans-fonts-1.10-24.el10.noarch 1/1 Running scriptlet: open-sans-fonts-1.10-24.el10.noarch 1/1 Installed: open-sans-fonts-1.10-24.el10.noarch Complete! Check for ImageMagicK System Updates (YUM) (BWarning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Error: Unknown repo: 'remi' real 0m0.158s user 0m0.128s sys 0m0.028s No matches found for the following disable plugin patterns: priorities Warning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. Error: Unknown repo: 'remi' real 0m0.154s user 0m0.117s sys 0m0.035s /usr/local/src/centminmod/inc/gcc.inc: line 5: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 ************************************************* * Installing imagick PHP Extension (B************************************************* /svr-setup/mailparse-3.1.8 cd /svr-setup /usr/local/src/centminmod/inc/imagick_install.inc: line 514: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 /usr/local/src/centminmod/inc/imagick_install.inc: line 517: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 grep: warning: stray \ before / Cloning into 'imagick-php8'... compiling imagick PHP extension for PHP 8.x ... imagick patch routine: PHPMVER=8.3 imagick patch routine: PHPMUVER= imagick patch routine: PHPVER_ID=80326 skipped imagick_php_patches function /usr/local/src/centminmod/inc/imagick_install.inc: line 612: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/imagick_install.inc: line 616: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. Copying imagick.ini > /etc/centminmod/php.d/imagick.ini ************************************************* * imagick PHP installed (B************************************************* geoipphpext /usr/local/src/centminmod/inc/gcc.inc: line 5: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 installing subversion... Installed: apr-1.7.5-2.el10.x86_64 apr-util-1.6.3-21.el10.x86_64 apr-util-lmdb-1.6.3-21.el10.x86_64 apr-util-openssl-1.6.3-21.el10.x86_64 libserf-1.3.10-7.el10.x86_64 subversion-1.14.3-8.el10.x86_64 subversion-libs-1.14.3-8.el10.x86_64 utf8proc-2.7.0-9.el10.x86_64 compiling geoip PHP extension... grep: warning: stray \ before / Cloning into 'geoip'... /usr/local/src/centminmod/inc/geoip.inc: line 122: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/geoip.inc: line 123: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. geoiptwolite_phpext_install redisinstall cat: /usr/local/bin/php-config: No such file or directory ************************************************* * Installing redis PHP extension (B************************************************* Downloading redis PHP extension... /usr/local/src/centminmod/inc/gcc.inc: line 5: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 checkredistar: REDISPHP_VER=6.1.0 Check if phpredis-6.1.0.tgz exists (BDownloading redis PHP extension.. (BDownload phpredis-6.1.0.tgz ... (BError: phpredis-6.1.0.tgz not found !!! Downloading now...... \E[1;32;40m wget -cnv --no-dns-cache -4 --progress=bar https://github.com/phpredis/phpredis/archive/6.1.0.tar.gz -O phpredis-6.1.0.tgz --tries=3 2025-10-05 18:07:56 URL:https://codeload.github.com/phpredis/phpredis/tar.gz/refs/tags/6.1.0 [403285] -> "phpredis-6.1.0.tgz" [1] Download done. (Bphpredis-6.1.0.tgz valid file. (B redisinstall: PHPVER_ID=80326 redisinstall: REDIS_PHPCURRENTVER= redisinstall: PHPMUVER= redisinstall: REDIS_PHPCURRENTVER= Compiling PHP redis-6.1.0 extension for PHP ... (B/svr-setup cd /svr-setup REDISPHP_GIT=n: REDISPHP_VER=6.1.0 /svr-setup cd /svr-setup /usr/local/src/centminmod/inc/redis.inc: line 240: /usr/local/bin/phpize: No such file or directory Installed: lz4-1.9.4-8.el10.x86_64 lz4-devel-1.9.4-8.el10.x86_64 Installed: liblzf-3.6-28.el10_0.x86_64 liblzf-devel-3.6-28.el10_0.x86_64 php configure alt CFLAGS=-fPIC -O2 -fstack-protector-strong -D_FORTIFY_SOURCE=2 CPPFLAGS=-D_FORTIFY_SOURCE=2 CXXFLAGS=-fPIC -O2 LDFLAGS=-Wl,-z,relro,-z,now -pie ./configure --with-php-config=/usr/local/bin/php-config --enable-redis-zstd --enable-redis-lz4 --with-liblz4 /usr/local/src/centminmod/inc/redis.inc: line 289: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. grep: /etc/centminmod/php.d/redis.ini: No such file or directory cat: /usr/local/bin/php-config: No such file or directory redis_server_install mongodbinstall swooleinstall zopfliinstall phptimezonedb_install Compiling timezonedb PHP Extension 2025.1 /svr-setup /svr-setup/phpredis-6.1.0 --2025-10-05 18:07:59-- https://pecl.php.net/get/timezonedb-2025.1.tgz Resolving pecl.php.net (pecl.php.net)... 185.85.0.29 Connecting to pecl.php.net (pecl.php.net)|185.85.0.29|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 646718 (632K) [application/octet-stream] Saving to: ‘timezonedb-2025.1.tgz’ 0K .......... .......... .......... .......... .......... 7% 547K 1s 50K .......... .......... .......... .......... .......... 15% 549K 1s 100K .......... .......... .......... .......... .......... 23% 546K 1s 150K .......... .......... .......... .......... .......... 31% 165M 1s 200K .......... .......... .......... .......... .......... 39% 214M 0s 250K .......... .......... .......... .......... .......... 47% 553K 0s 300K .......... .......... .......... .......... .......... 55% 176M 0s 350K .......... .......... .......... .......... .......... 63% 77.3M 0s 400K .......... .......... .......... .......... .......... 71% 126M 0s 450K .......... .......... .......... .......... .......... 79% 83.7M 0s 500K .......... .......... .......... .......... .......... 87% 565K 0s 550K .......... .......... .......... .......... .......... 95% 79.4M 0s 600K .......... .......... .......... . 100% 228M=0.5s 2025-10-05 18:08:00 (1.35 MB/s) - ‘timezonedb-2025.1.tgz’ saved [646718/646718] make: *** No rule to make target 'clean'. Stop. /usr/local/src/centminmod/inc/timezonedb.inc: line 13: /usr/local/bin/phpize: No such file or directory /usr/local/src/centminmod/inc/timezonedb.inc: line 14: ./configure: No such file or directory make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target 'install'. Stop. /svr-setup/phpredis-6.1.0 ./centmin.sh: line 3351: php-config: command not found egrep: warning: egrep is obsolescent; using grep -E 1 pureftpinstall pure-ftpd not installed installing pure-ftpd Installed: pure-ftpd-1.0.52-1.el10_0.x86_64 real 0m1.602s user 0m0.690s sys 0m0.240s systemctl enable pure-ftpd.service Created symlink '/etc/systemd/system/multi-user.target.wants/pure-ftpd.service' → '/usr/lib/systemd/system/pure-ftpd.service'. configuring pure-ftpd for virtual user support MaxClientsNumber 1000 | MaxClientsNumber 50 MaxClientsPerIP 500 | MaxClientsPerIP 8 VerboseLog yes | VerboseLog no NoAnonymous yes | NoAnonymous no UnixAuthentication yes | # UnixAuthentication yes PassivePortRange 30001 50011 | # PassivePortRange 30000 50000 Umask 137:027 | Umask 133:022 CreateHomeDir yes | # CreateHomeDir yes TLS 2 | # TLS 1 egrep: warning: egrep is obsolescent; using grep -E MaxClientsNumber 1000 MaxClientsPerIP 500 VerboseLog yes NoAnonymous yes # PureDB user database (see README.Virtual-Users) # PureDB @sysconfigdir@/pureftpd.pdb UnixAuthentication yes # UnixAuthentication can be used specified once, but can be combined # together. For instance, if you use MySQLConfigFile, then UnixAuthentication, PassivePortRange 30001 50011 Umask 137:027 CreateHomeDir yes # 0: disable SSL/TLS encryption layer (default). # 2: refuse connections that don't use the TLS security mechanism, # 1) The server has been compiled with TLS support (--with-tls), TLS 2 # Cipher suite for TLS sessions. # TLSCipherSuite HIGH # Certificate file, for TLS # Unix socket of the external certificate handler, for TLS generating self-signed ssl certificate... FTP client needs to use FTP (explicit SSL) mode to connect to server's main ip address on port 21 ......+++++++++++++++++++++++++++++++++++++++*.+........................+.+......+...........+.......+..+......+.......+.....+.+...........+..........+.........+..+...+....+.....+.......+......+.....+....+...+++++++++++++++++++++++++++++++++++++++*......+.+..+......+.+......+..+...+.........+......+.........+......+.......+..+....+.........+.....+.............+...+...........+.........+.+.....+.+.....+...+...............+..........+......+.....+....+......+......+..+...+............+.+.....+.+...........+.......+............+...+........+............+.+..+.......+.....+...+...+.......+.....+...+....+..+.+..+............+.........+.+........+..................+..........+..+.......+.........+.........+.....+......+....+..+.........+.+.........+.....+.........+......+.+.....++++++ .....+.+...+.....+.......+.....+.+............+.....+...+...+.+.....+...............+.+..+...+....+........+...+.......+.....+.+.....+.+.....+.+...+............+++++++++++++++++++++++++++++++++++++++*.+.+.........+...+..+++++++++++++++++++++++++++++++++++++++*..+...+.......+...+.....++++++ ----- Certificate: Data: Version: 3 (0x2) Serial Number: 74:33:ab:20:8a:ca:27:1b:6c:9b:cd:fd:f7:b9:98:d0:07:6c:0a:e6 Signature Algorithm: sha256WithRSAEncryption Issuer: C=US, ST=California, L=Los Angeles, O=Default Company Ltd, CN=178.156.175.54 Validity Not Before: Oct 5 18:08:06 2025 GMT Not After : Sep 30 18:08:06 2045 GMT Subject: C=US, ST=California, L=Los Angeles, O=Default Company Ltd, CN=178.156.175.54 Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: 00:cd:95:66:5d:a9:73:23:aa:bd:61:81:bb:bf:c2: 56:e7:66:f5:90:42:84:23:b3:71:3f:dc:5e:52:f9: de:8d:ec:2c:89:3c:1e:a8:49:ea:dc:6f:f4:f8:48: 29:96:c9:d8:2b:9d:9b:31:46:f0:ce:ed:1a:84:95: 8c:3f:1a:7e:37:b8:55:ee:70:6b:97:94:16:98:a7: 8a:68:77:e1:50:cb:df:e6:1c:51:59:f1:87:28:4b: 8d:51:11:26:1c:c5:ec:fa:d6:e2:2b:75:2e:b1:7d: d5:00:bf:5c:c9:6b:53:4e:f8:c8:a7:43:1a:c6:53: ee:71:c0:c8:21:2a:b7:56:65:9c:ed:2b:2c:18:e6: b0:8e:ec:61:76:51:61:18:bd:06:74:7b:d7:2c:77: de:16:9e:e2:f3:88:25:86:22:f4:c0:bb:db:01:7b: 02:6b:6c:7b:36:96:85:1c:31:4b:0e:26:45:f9:ed: 8e:61:37:f4:68:50:18:20:05:90:59:3a:2b:1c:b5: ff:3e:11:9f:32:a2:0c:bf:1f:e7:c7:ff:2b:05:93: a3:97:06:fd:4d:ba:f3:bc:1b:be:b7:f0:54:f3:05: 80:9b:86:bf:ce:13:bd:a5:c5:c2:74:92:2d:e4:f3: e0:7c:4a:26:1f:a9:a3:e6:7d:0c:26:48:1c:1b:82: e7:21 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Key Identifier: 67:03:25:71:DA:36:2F:B1:70:F2:06:2B:07:22:34:0E:08:32:00:25 X509v3 Authority Key Identifier: 67:03:25:71:DA:36:2F:B1:70:F2:06:2B:07:22:34:0E:08:32:00:25 X509v3 Basic Constraints: critical CA:TRUE Signature Algorithm: sha256WithRSAEncryption Signature Value: 0b:e9:e9:4e:da:a3:30:73:12:16:62:f9:5d:2f:3a:2a:17:8d: f0:ce:77:be:bd:d6:e4:18:09:73:e8:0d:ad:e1:8c:3a:98:24: 08:77:c6:cc:47:be:9a:e0:c0:bb:9e:90:1b:9a:5b:aa:ff:8a: bc:b8:e2:5c:a2:44:fb:97:64:24:22:80:e8:10:b9:99:05:31: bd:f4:7a:4d:ab:0f:c2:1f:27:2e:bb:f7:5c:59:e3:2a:98:55: e3:89:b4:16:19:4c:6a:22:7c:4b:a7:b1:b3:47:4b:c8:57:39: 34:c7:16:6f:03:5a:1b:91:87:6b:86:55:ff:ab:d3:98:4f:bd: 33:ba:0d:5e:6c:3a:99:a2:78:f2:0b:d9:f6:50:e4:83:f5:b3: 2a:dc:2b:e1:3e:b1:68:43:65:99:26:98:b3:bc:c0:eb:5e:14: 74:8a:7d:6e:6c:d9:61:bb:05:5b:db:0b:2c:59:8e:95:67:2a: 84:53:b6:09:ae:25:c9:04:92:8c:a4:7f:b9:40:b4:cf:91:f1: 3d:63:c4:dd:1d:c2:73:6e:2e:81:cc:00:7b:6d:f4:81:81:37: 74:f7:95:9d:68:e0:f1:85:41:65:c3:59:31:fc:e8:c2:64:92: 67:ca:ae:e1:de:25:22:80:18:3e:50:fb:38:84:41:24:b1:84: 50:28:f1:85 total 12K drwx------. 2 root root 4.0K Oct 5 18:08 . drwxr-xr-x. 14 root root 4.0K Oct 5 18:08 .. -rw-------. 1 root root 3.0K Oct 5 18:08 pure-ftpd.pem self-signed ssl cert generated ls -lAh /etc/systemd/system/pure-ftpd.service.d ls: cannot access '/etc/systemd/system/pure-ftpd.service.d': No such file or directory cat /etc/systemd/system/pure-ftpd.service.d/pidfile.conf [Service] PIDFile=/run/pure-ftpd.pid pure-ftpd installed journalctl -u pure-ftpd --no-pager | tail -10 Oct 05 18:08:02 nsrv.DentalSupplyGuy.com systemd[1]: /usr/lib/systemd/system/pure-ftpd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/pure-ftpd.pid → /run/pure-ftpd.pid; please update the unit file accordingly. Oct 05 18:08:07 nsrv.DentalSupplyGuy.com systemd[1]: /usr/lib/systemd/system/pure-ftpd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/pure-ftpd.pid → /run/pure-ftpd.pid; please update the unit file accordingly. Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `ALLOWDYNIN' Flushing chain `ALLOWDYNOUT' Flushing chain `ALLOWIN' Flushing chain `ALLOWOUT' Flushing chain `DENYIN' Flushing chain `DENYOUT' Flushing chain `INVALID' Flushing chain `INVDROP' Flushing chain `LOCALINPUT' Flushing chain `LOCALOUTPUT' Flushing chain `LOGDROPIN' Flushing chain `LOGDROPOUT' Flushing chain `UDPFLOOD' Deleting chain `ALLOWDYNIN' Deleting chain `ALLOWDYNOUT' Deleting chain `ALLOWIN' Deleting chain `ALLOWOUT' Deleting chain `DENYIN' Deleting chain `DENYOUT' Deleting chain `INVALID' Deleting chain `INVDROP' Deleting chain `LOCALINPUT' Deleting chain `LOCALOUTPUT' Deleting chain `LOGDROPIN' Deleting chain `LOGDROPOUT' Deleting chain `UDPFLOOD' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `PREROUTING' Flushing chain `OUTPUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `ALLOWDYNIN' Flushing chain `ALLOWDYNOUT' Flushing chain `ALLOWIN' Flushing chain `ALLOWOUT' Flushing chain `DENYIN' Flushing chain `DENYOUT' Flushing chain `INVALID' Flushing chain `INVDROP' Flushing chain `LOCALINPUT' Flushing chain `LOCALOUTPUT' Flushing chain `LOGDROPIN' Flushing chain `LOGDROPOUT' Flushing chain `UDPFLOOD' Deleting chain `ALLOWDYNIN' Deleting chain `ALLOWDYNOUT' Deleting chain `ALLOWIN' Deleting chain `ALLOWOUT' Deleting chain `DENYIN' Deleting chain `DENYOUT' Deleting chain `INVALID' Deleting chain `INVDROP' Deleting chain `LOCALINPUT' Deleting chain `LOCALOUTPUT' Deleting chain `LOGDROPIN' Deleting chain `LOGDROPOUT' Deleting chain `UDPFLOOD' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' Flushing chain `PREROUTING' Flushing chain `OUTPUT' Flushing chain `PREROUTING' Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `POSTROUTING' csf: FASTSTART loading DROP no logging (IPv4) csf: FASTSTART loading DROP no logging (IPv6) LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *TCP_IN Blocked* " LOG tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *TCP_OUT Blocked* " LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *UDP_IN Blocked* " LOG udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDP_OUT Blocked* " LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *ICMP_IN Blocked* " LOG icmp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *ICMP_OUT Blocked* " LOG tcp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *TCP6IN Blocked* " LOG tcp opt -- in * out * ::/0 -> ::/0 tcp flags:0x17/0x02 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *TCP6OUT Blocked* " LOG udp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *UDP6IN Blocked* " LOG udp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDP6OUT Blocked* " LOG ipv6-icmp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *ICMP6IN Blocked* " LOG ipv6-icmp opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *ICMP6OUT Blocked* " LOG all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *Port Flood* " LOG all opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix "Firewall: *Port Flood* " DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 REJECT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 reject-with icmp-port-unreachable DROP all opt -- in * out * ::/0 -> ::/0 REJECT all opt -- in * out * ::/0 -> ::/0 reject-with icmp6-port-unreachable DENYOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 DENYIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ALLOWOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ALLOWIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 DENYOUT all opt -- in * out !lo ::/0 -> ::/0 DENYIN all opt -- in !lo out * ::/0 -> ::/0 ALLOWOUT all opt -- in * out !lo ::/0 -> ::/0 ALLOWIN all opt -- in !lo out * ::/0 -> ::/0 csf: FASTSTART loading Packet Filter (IPv4) csf: FASTSTART loading Packet Filter (IPv6) DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 INVALID tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 INVALID tcp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 DROP all opt -- in * out * ::/0 -> ::/0 INVALID tcp opt -- in !lo out * ::/0 -> ::/0 INVALID tcp opt -- in * out !lo ::/0 -> ::/0 csf: IPSET creating set chain_DENY csf: IPSET creating set chain_6_DENY csf: FASTSTART loading csf.deny (IPv4) csf: FASTSTART loading csf.deny (IPv6) csf: FASTSTART loading csf.deny (IPSET) csf: IPSET creating set chain_ALLOWDYN ACCEPT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set chain_ALLOWDYN src ACCEPT all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 match-set chain_ALLOWDYN dst csf: IPSET creating set chain_6_ALLOWDYN ACCEPT all opt -- in * out * ::/0 -> ::/0 match-set chain_6_ALLOWDYN src ACCEPT all opt -- in * out * ::/0 -> ::/0 match-set chain_6_ALLOWDYN dst ALLOWDYNIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ALLOWDYNOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ALLOWDYNIN all opt -- in !lo out * ::/0 -> ::/0 ALLOWDYNOUT all opt -- in * out !lo ::/0 -> ::/0 csf: IPSET creating set chain_ALLOW csf: IPSET creating set chain_6_ALLOW csf: FASTSTART loading csf.allow (IPv4) csf: FASTSTART loading csf.allow (IPv6) csf: FASTSTART loading csf.allow (IPSET) tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:21 state NEW recent: SET name: 21 side: source mask: 255.255.255.255 PORTFLOOD tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:21 state NEW recent: UPDATE seconds: 300 hit_count: 20 name: 21 side: source mask: 255.255.255.255 tcp opt -- in !lo out * ::/0 -> ::/0 tcp dpt:21 state NEW recent: SET name: 21 side: source mask: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff PORTFLOOD tcp opt -- in !lo out * ::/0 -> ::/0 tcp dpt:21 state NEW recent: UPDATE seconds: 300 hit_count: 20 name: 21 side: source mask: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 DROP all opt -- in * out * ::/0 -> ::/0 RETURN udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 owner UID match 0 RETURN udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 100/sec burst 500 LOG all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDPFLOOD* " REJECT udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 reject-with icmp-port-unreachable UDPFLOOD udp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 RETURN udp opt -- in * out * ::/0 -> ::/0 owner UID match 0 RETURN udp opt -- in * out !lo ::/0 -> ::/0 limit: avg 100/sec burst 500 LOG all opt -- in * out * ::/0 -> ::/0 limit: avg 30/min burst 5 LOG flags 8 level 4 prefix "Firewall: *UDPFLOOD* " REJECT udp opt -- in * out !lo ::/0 -> ::/0 reject-with icmp6-port-unreachable UDPFLOOD udp opt -- in * out !lo ::/0 -> ::/0 ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmptype 8 limit: avg 1/sec burst 5 LOGDROPIN icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 icmptype 8 ACCEPT icmp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT icmp opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT ipv6-icmp opt -- in !lo out * ::/0 -> ::/0 ACCEPT ipv6-icmp opt -- in * out !lo ::/0 -> ::/0 ACCEPT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all opt -- in !lo out * ::/0 -> ::/0 state RELATED,ESTABLISHED ACCEPT all opt -- in * out !lo ::/0 -> ::/0 state RELATED,ESTABLISHED csf: FASTSTART loading TCP_IN (IPv4) csf: FASTSTART loading TCP6_IN (IPv6) csf: FASTSTART loading TCP_OUT (IPv4) csf: FASTSTART loading TCP6_OUT (IPv6) csf: FASTSTART loading UDP_IN (IPv4) csf: FASTSTART loading UDP6_IN (IPv6) csf: FASTSTART loading UDP_OUT (IPv4) csf: FASTSTART loading UDP6_OUT (IPv6) ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0 LOGDROPOUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 LOGDROPIN all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in lo out * ::/0 -> ::/0 ACCEPT all opt -- in * out lo ::/0 -> ::/0 LOGDROPOUT all opt -- in * out !lo ::/0 -> ::/0 LOGDROPIN all opt -- in !lo out * ::/0 -> ::/0 csf: FASTSTART loading DNS (IPv4) csf: FASTSTART loading DNS (IPv6) LOCALOUTPUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 LOCALINPUT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 LOCALOUTPUT all opt -- in * out !lo ::/0 -> ::/0 LOCALINPUT all opt -- in !lo out * ::/0 -> ::/0 *WARNING* Binary location for [HOST] [/usr/bin/host] in /etc/csf/csf.conf is either incorrect, is not installed or is not executable *WARNING* Missing or incorrect binary locations will break csf and lfd functionality *WARNING* DENY_TEMP_IP_LIMIT sanity check. DENY_TEMP_IP_LIMIT = 150000. Recommended range: 10-1000 (Default: 100) *WARNING* LF_DISTFTP sanity check. LF_DISTFTP = 40. Recommended range: 0-20 (Default: 0) *WARNING* LF_DISTFTP_UNIQ sanity check. LF_DISTFTP_UNIQ = 40. Recommended range: 2-20 (Default: 2) *WARNING* RESTRICT_SYSLOG is disabled. See SECURITY WARNING in /etc/csf/csf.conf. check /etc/pure-ftpd/pureftpd.passwd -rw-------. 1 root root 0 Oct 5 18:08 /etc/pure-ftpd/pureftpd.passwd check /etc/pure-ftpd/pureftpd.pdb -rw-------. 1 root root 2.1K Oct 5 18:08 /etc/pure-ftpd/pureftpd.pdb source_pcreinstall ********************************************************************** * Add cmd shortcuts for php.ini, my.cnf, php-fpm.conf, nginx.conf and virtual.conf * Edit /etc/centminmod/custom_config.inc = customconfig * Edit php.ini = phpedit * Edit my.cnf = mycnf * Edit php-fpm.conf = fpmconf * Edit nginx.conf = nginxconf * Edit virtual.conf = vhostconf * nginx stop/start/restart = ngxstop/ngxstart/ngxrestart * php-fpm stop/start/restart = fpmstop/fpmstart/fpmrestart * mysql stop/start/restart = mysqlstop/mysqlstart/mysqlrestart * nginx + php-fpm stop/start/restart = npstop/npstart/nprestart * memcached stop/start/restart = memcachedstop/memcachedstart/memcachedrestart * csf stop/start/restart = csfstop/csfstart/csfrestart ********************************************************************** ********************************************************************** (B* Starting Services... (B********************************************************************** (BJob for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xeu nginx.service" for details. Redirecting to /bin/systemctl restart postfix.service Redirecting to /bin/systemctl start csf.service ************************************************* * Post-Install Check List.... (B************************************************* -------------------------------------------------------- (BCheck ccache Version: (B-------------------------------------------------------- (Bccache version 3.7.12 Copyright (C) 2002-2007 Andrew Tridgell Copyright (C) 2009-2020 Joel Rosdahl This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. -------------------------------------------------------- (BCheck Nginx Version: (B-------------------------------------------------------- (Bwhich: no nginx in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) can not find nginx binary.. install failed -------------------------------------------------------- (BCheck PHP-FPM Version: (B-------------------------------------------------------- (Bwhich: no php in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) /usr/local/src/centminmod/inc/centminfinish.inc: line 200: -v: command not found Unit php-fpm.service could not be found. journalctl -u php-fpm --no-pager | tail -150 -- No entries -- -------------------------------------------------------- (BCheck MariaDB installed RPM Versions: (B-------------------------------------------------------- (Bmariadb-connector-c-config-3.4.4-1.el10.noarch mariadb-connector-c-3.4.4-1.el10.x86_64 Unit mariadb.service could not be found. journalctl -u mariadb --no-pager | tail -150 -- No entries -- -------------------------------------------------------- (BCheck Memcached Server Version: (B-------------------------------------------------------- (Bmemcached 1.6.36 -------------------------------------------------------- (BCheck Redis Server Version: (B-------------------------------------------------------- (B/usr/local/src/centminmod/inc/centminfinish.inc: line 318: /usr/bin/redis-server: No such file or directory Unit redis.service could not be found. journalctl -u redis --no-pager | tail -150 -- No entries -- -------------------------------------------------------- (BCheck CSF Firewall Version: (B-------------------------------------------------------- (Bcsf: v15.01 (generic) ● csf.service - ConfigServer Firewall & Security - csf Loaded: loaded (/usr/lib/systemd/system/csf.service; enabled; preset: disabled) Active: active (exited) since Sun 2025-10-05 18:08:15 UTC; 2s ago Invocation: a2766c9c9bfc454c82a1a79a792caa3a Process: 30324 ExecStart=/usr/sbin/csf --initup (code=exited, status=0/SUCCESS) Main PID: 30324 (code=exited, status=0/SUCCESS) Mem peak: 31.8M CPU: 758ms Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: ACCEPT all opt -- in * out lo ::/0 -> ::/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOGDROPOUT all opt -- in * out !lo ::/0 -> ::/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOGDROPIN all opt -- in !lo out * ::/0 -> ::/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: csf: FASTSTART loading DNS (IPv4) Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: csf: FASTSTART loading DNS (IPv6) Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOCALOUTPUT all opt -- in * out !lo 0.0.0.0/0 -> 0.0.0.0/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOCALINPUT all opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOCALOUTPUT all opt -- in * out !lo ::/0 -> ::/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com csf[30324]: LOCALINPUT all opt -- in !lo out * ::/0 -> ::/0 Oct 05 18:08:15 nsrv.DentalSupplyGuy.com systemd[1]: Finished csf.service - ConfigServer Firewall & Security - csf. ● lfd.service - ConfigServer Firewall & Security - lfd Loaded: loaded (/usr/lib/systemd/system/lfd.service; enabled; preset: disabled) Active: active (running) since Sun 2025-10-05 18:07:35 UTC; 42s ago Invocation: 1bad19fb6c4e46dea3719e7103e7b99a Main PID: 28542 (lfd - sleeping) Tasks: 1 (limit: 47437) Memory: 27.6M (peak: 46.5M) CPU: 330ms CGroup: /system.slice/lfd.service └─28542 "lfd - sleeping" Oct 05 18:07:35 nsrv.DentalSupplyGuy.com systemd[1]: Starting lfd.service - ConfigServer Firewall & Security - lfd... Oct 05 18:07:35 nsrv.DentalSupplyGuy.com systemd[1]: Started lfd.service - ConfigServer Firewall & Security - lfd. -------------------------------------------------------- (BCheck mysqlreport version: (B-------------------------------------------------------- (Bmysqlreport v3.5-maria11 Jul 4 2013 -------------------------------------------------------- (BCheck pure-ftpd Version: (B-------------------------------------------------------- (Bpure-ftpd v1.0.52 ● pure-ftpd.service - Pure-FTPd FTP server Loaded: loaded (/usr/lib/systemd/system/pure-ftpd.service; enabled; preset: disabled) Drop-In: /etc/systemd/system/pure-ftpd.service.d └─pidfile.conf Active: active (running) since Sun 2025-10-05 18:08:19 UTC; 12ms ago Invocation: c3a1c8523d3c4020811dfc1a737e944e Process: 30640 ExecStart=/usr/sbin/pure-ftpd /etc/pure-ftpd/pure-ftpd.conf (code=exited, status=0/SUCCESS) Main PID: 30641 (pure-ftpd) Tasks: 1 (limit: 47437) Memory: 1.6M (peak: 1.8M) CPU: 10ms CGroup: /system.slice/pure-ftpd.service └─30641 /usr/sbin/pure-ftpd /etc/pure-ftpd/pure-ftpd.conf Oct 05 18:08:19 nsrv.DentalSupplyGuy.com systemd[1]: Starting pure-ftpd.service - Pure-FTPd FTP server... Oct 05 18:08:19 nsrv.DentalSupplyGuy.com systemd[1]: pure-ftpd.service: Can't open PID file '/run/pure-ftpd.pid' (yet?) after start: No such file or directory Oct 05 18:08:19 nsrv.DentalSupplyGuy.com systemd[1]: Started pure-ftpd.service - Pure-FTPd FTP server. -------------------------------------------------------- (BCheck postfix Status: (B-------------------------------------------------------- (B● postfix.service - Postfix Mail Transport Agent Loaded: loaded (/usr/lib/systemd/system/postfix.service; enabled; preset: disabled) Active: active (running) since Sun 2025-10-05 18:08:12 UTC; 7s ago Invocation: 465116af73a54b03a315eff4ce8dc47d Main PID: 30305 (master) Tasks: 3 (limit: 47437) Memory: 2.2M (peak: 3.4M) CPU: 236ms CGroup: /system.slice/postfix.service ├─30305 /usr/libexec/postfix/master -w ├─30306 pickup -l -t unix -u └─30307 qmgr -l -t unix -u Oct 05 18:08:12 nsrv.DentalSupplyGuy.com systemd[1]: Starting postfix.service - Postfix Mail Transport Agent... Oct 05 18:08:12 nsrv.DentalSupplyGuy.com postfix[30303]: postfix/postlog: starting the Postfix mail system Oct 05 18:08:12 nsrv.DentalSupplyGuy.com postfix/postfix-script[30303]: starting the Postfix mail system Oct 05 18:08:12 nsrv.DentalSupplyGuy.com postfix/master[30305]: daemon started -- version 3.8.5, configuration /etc/postfix Oct 05 18:08:12 nsrv.DentalSupplyGuy.com systemd[1]: Started postfix.service - Postfix Mail Transport Agent. -------------------------------------------------------- (BCheck YUM Repo List (B-------------------------------------------------------- (BWarning: failed loading '/etc/yum.repos.d/mariadb.repo', skipping. repo id repo name appstream AlmaLinux 10 - AppStream baseos AlmaLinux 10 - BaseOS crb AlmaLinux 10 - CRB epel Extra Packages for Enterprise Linux 10 - x86_64 extras AlmaLinux 10 - Extras -------------------------------------------------------- (Bmytimes check: (B/usr/bin/mytimes (B-------------------------------------------------------- (BSun Oct 5 06:08:20 PM UTC 2025 [UTC] Mon Oct 6 04:08:20 AM AEST 2025 [Australia/Brisbane] Sun Oct 5 11:08:20 AM PDT 2025 [America/Los_Angeles] Sun Oct 5 01:08:20 PM CDT 2025 [America/Chicago] Sun Oct 5 02:08:20 PM EDT 2025 [America/New_York] Sun Oct 5 02:08:20 PM EDT 2025 [America/Montreal] Sun Oct 5 07:08:20 PM BST 2025 [Europe/London] Sun Oct 5 08:08:20 PM CEST 2025 [Europe/Berlin] Mon Oct 6 01:08:20 AM +07 2025 [Asia/Bangkok] Mon Oct 6 01:08:20 AM +07 2025 [Asia/Ho_Chi_Minh] Mon Oct 6 01:08:20 AM WIB 2025 [Asia/Jakarta] Mon Oct 6 02:08:20 AM +08 2025 [Asia/Kuala_Lumpur] Mon Oct 6 02:08:20 AM +08 2025 [Asia/Singapore] -------------------------------------------------------- (Bgrep: /var/log/yum.log: No such file or directory ************************************************* * Centmin Mod install completed.... (B************************************************* /usr/local/src/centminmod/inc/memcacheadmin.inc: line 17: php-config: command not found ************************************************* * Setup memcached_*.php admin page ... (B************************************************* Setup Memcached Server Admin Login Details for /usr/local/nginx/html/memcache_0d1829fb68fde4e0.php (Bcurrent memcached username: memcacheuser (Bcurrent memcached password: memcachepass (B************************************************* Memcached Server Admin Login File: /usr/local/nginx/html/memcache_0d1829fb68fde4e0.php (BMemcached Server Admin Login: nsrv.DentalSupplyGuy.com/memcache_0d1829fb68fde4e0.php (Bnew memcached username: memadminXEycSqxjEhVrDw (Bnew memcached password: VqHGGYpmTkEwxffWUL9AwlkXodN (B************************************************* ************************************************* * memcache_0d1829fb68fde4e0.php admin page installed (B************************************************* run phpiadmin ************************************************* PHP Info Login File: /usr/local/nginx/html/cbffd0a3_phpi.php (BPHP Info Login: nsrv.DentalSupplyGuy.com/cbffd0a3_phpi.php (BPHP Info Login username: phpiadminc2gZVub6YZXbDhOmOcE (BPHP Info Login password: Fg9qlN8wTqLk2StMR4lKT2yU3g (B************************************************* ************************************************* * Zend Opcache Stats Password / URL (B************************************************* ------------------------------------------------------- (BFile Location: /usr/local/nginx/html/deab016e5925bed6_opcache.php (BPassword protected nsrv.DentalSupplyGuy.com/deab016e5925bed6_opcache.php (B------------------------------------------------------- (BUsername: opadminPmvtFRULyyDf9pY (BPassword: zx0WYuf6IX3kgkbfa6wbCgcS5bJZuX8 (B------------------------------------------------------- (B ************************************************* * MariaDB Security Setup (B************************************************* ------------------------------------------------------- (BMySQL root user password set (BMySQL root user added to /root/.my.cnf (B------------------------------------------------------- (BMySQL root password: 9pjLutlX0LN8O9B74NWDQq6mSyUuGd9br3Y (B------------------------------------------------------- (B************************************************* * MariaDB Security Setup Completed (B************************************************* disk cleanups check HOME=/root check PWD=/svr-setup/memcache-3.0.8 /svr-setup -------------------------------------------------------- (BPlease bookmark: (B-------------------------------------------------------- (B############################################################### * Getting Started Guide - https://centminmod.com/getstarted.html * Find the latest Centmin Mod version - https://centminmod.com * Centmin Mod FAQ - https://centminmod.com/faq.html * Change Log - https://centminmod.com/changelog.html * Centmin Mod Blog https://blog.centminmod.com * Community Forums https://community.centminmod.com (signup) ############################################################### # Cheap VPS Hosting at Digitalocean # https://www.digitalocean.com/?refcode=c1cb367108e8 ############################################################### # Fast Network Bandwidth Transfer VPS Hosting >1-12Gbps at Linode # New signups get free $100 60 day credit with validated payment added # https://www.linode.com/lp/refer/?r=f6d38ee057f8c18a3f508651b26af0e4ca1fbd46 ############################################################### # High Performance VPS Hosting at Upcloud # New signups get free $25 credits # https://upcloud.com/signup/?promo=DPY36J ############################################################### ./centmin.sh install completion /root/.bashrc modifications alias command setup Created command shortcuts: * type cmdir to change to Centmin Mod install directory at /usr/local/src/centminmod * type centmin call and run centmin.sh at /usr/local/src/centminmod/centmin.sh --------------------------------------------------------------------------- Total Curl Installer YUM or DNF Time: 5.9454 seconds Total YUM Time: 7.604104424 seconds betainstaller83.sh: line 2427: /usr/local/bin/php: No such file or directory Total YUM or DNF + Source Download Time: 24.6105 Total Nginx First Time Install Time: 14.2728 Total PHP First Time Install Time: 55.6216 Download From Github Time: 0.6730 Total Time Other eg. source compiles: 151.4948 Total Centmin Mod Install Time: 245.9998 --------------------------------------------------------------------------- Total Install Time for curl yum + cm install + zip download: 252.6182 seconds --------------------------------------------------------------------------- AlmaLinux 10.0 Purple Lion 6.12.0-55.28.1.el10_0.x86_64 2 AMD EPYC-Milan Processor 2 2196.698 betainstaller83.sh: line 2450: php-config: command not found PHP VERSION: --------------------------------------------------------------------------- Centmin Mod Version: 140.00beta01.b252 Install Summary Logs: /root/centminlogs/installer_summary_links.log --------------------------------------------------------------------------- --------------------------------------------------------------------------- Total Curl Installer YUM or DNF Time: 5.9454 seconds Total YUM Time: 7.604104424 seconds betainstaller83.sh: line 2427: /usr/local/bin/php: No such file or directory Total YUM or DNF + Source Download Time: 24.6105 Total Nginx First Time Install Time: 14.2728 Total PHP First Time Install Time: 55.6216 Download From Github Time: 0.6730 Total Time Other eg. source compiles: 151.4948 Total Centmin Mod Install Time: 245.9998 --------------------------------------------------------------------------- Total Install Time for curl yum + cm install + zip download: 252.6182 seconds --------------------------------------------------------------------------- AlmaLinux 10.0 Purple Lion 6.12.0-55.28.1.el10_0.x86_64 2 AMD EPYC-Milan Processor 2 2196.698 betainstaller83.sh: line 2450: php-config: command not found PHP VERSION: --------------------------------------------------------------------------- Centmin Mod Version: 140.00beta01.b252 Install Summary Logs: /root/centminlogs/installer_summary_links.log --------------------------------------------------------------------------- egrep: warning: egrep is obsolescent; using grep -E grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before / grep: warning: stray \ before /